Popup with generic ALV to display all fields of a structure

Hello WebDynpro Experts,
I have developed a WebDynpro application using an ALV control to display all the search results in a table.
The number of columns shown in this table is reduced by a default view, that is preset for all users.
In the SAP GUI there is a standard feature to show all the details of a record in a pop up window.
E.g. in WE02 you see a few fields in the ALV table, and when you click on the details button, you get a popup with all the fields of the selected line.
Is there something similar in the ALV table for WebDynpro?
I want to show all the fields of the selected structure in a generic table with two columns: Field label and value.
Can anybody help?
Regards,
Jürgen

Hello Jurgen,
                When you select a particular row in ALV table, you can get the data in that row by using ONLEADSELECT
        method from used component(SALV_WD_TABLE).
               And i Guess you can get all the field names of that structure from DD03L table and you can display them
        in a generic table.
    Regards,
    Harry

Similar Messages

At run time,ALV table is displaying all fields of database table

Hi all
I done one application using ALv I am displaying the ALV Table.my problem is at run time it was fetching and displaying all the fields in the data base table but i need only the fields which are defined in node.
Please help me.
Thanks and Regards
Tulasi Palnati

Hi,
May be you have specified the database table as the Dicitonary structure property of the node.
Check the same and if its there clear the Dictionary structure property of the node.
Hope this solves your isse!
Regards,
Srilatha

In background how to display all fields using reuse_alv_list_display

Hi all,
        I have output table with 100 fields,when i ran in background its giving the output with out alignments,how to make the whole record in a single line,presently it displays each record in a 3 rows,please help me
thanks
Sriman

Hi,
   In fore ground it displaying all columns but when i ran in background its giving all fields but the each record contains rows,i need to make it as single line
the code i have written for this is.
for background is there any parameter to add for this code.help me
ls_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = repid
      it_fieldcat        = it_fieldcat
     it_events          = events_b
      is_layout          = ls_layout
    it_events          = it_events
        is_print           = ls_print
      i_save             = 'X'
    TABLES
      t_outtab           = t_ce1jab1.
thanks
sriman

Ipad contacts not displaying all fields from mac address book, ipad contacts not displaying all fields from mac address book

After syncing mac address book to ipad contacts, the ipad does not display all the fields that were in Mac address book (in my case all the email addresses). Anyone have a fix?

I have a problem similar to DeeRun's.. I would like the IM fields to be synced.. I use them to send e-mails to when the e-mail field is empty or when i just want to use that specific address.. Very annoying, would take hours if not days to transfer all those IM adresses to e-mail fields in addressbook..
EDIT: not to mention the mess it would make in my address book!
Message was edited by: 1NStanley

Content Query Web Part will not display all fields.

I would love some assistance on this. When I choose fields to display in the Web Part they do not appear. And I should say the the article "How to: Display Custom Fields in a Content Query Web Part" on the Developer Network is
a great start but it is only applicable to '07 and '10. Where is the detailed info for SP 2013??

Hi,
According to your description, my understanding is that you want to display custom columns in Content Query web part in SharePoint 2013.
Per my knowledge, the method for SharePoint 2013 to display custom columns in Content Query web part is the same with SharePoint 2010.
The method in the link below is also can be used for SharePoint 2013:
http://msdn.microsoft.com/en-us/library/ms497457(v=office.14).ASPX
Do you encounter any issue when customizing in in a Content Query Web Part?
Here are some links about customizing the ItemStyle.xsl to display custom columns in Content Query web part in SharePoint 2013 for you to take a look:
http://prafulgoyal.blogspot.in/2013/04/sharepoint-content-query-webpart-oob.html
http://social.msdn.microsoft.com/Forums/en-US/49739730-47c1-43df-9d0e-ad506e6ca31b/display-multiple-columns-in-content-query-webpart
http://social.msdn.microsoft.com/Forums/en-US/1484df2b-0fb9-4b58-b833-a75019db88c7/content-query-display-multiple-columns?forum=sharepointgeneral
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problems with data merge (CS4) - puts all fields in one

Data merge is acting very weird, I have a standard textfile of six columns exported to .csv. When I import it in InDesign it puts all fields in one place (see image) and it becomes totally useless. Has anyone had this problem and if so, how did you solve it?
Thank you!

It is a regular textfile (http://www.pixentral.com/show.php?picture=1k0bmos4r2l7lCtegA1CGHIcw98jrM
) divided into columns...
28 apr 2009 kl. 23.00 skrev Peter Spier:
I took a look at the image, now that it's out of the queue, and the
fields seem to be seaparted by semi-colons. How did you make the file?
>
ID recognizes comma-sparated (CSV) or tab-delimited text files.
>
Peter
>

ALV Grid Display Editable Field Disables Zebra Style

Hi all,
First of all, I want to say: "I did my research." I found a post with a very similar question but not identically my case, or at least I can't solve it the same way. [Here is the reference post.|Re: Check box impact on ALV grid (Using OOPS)]
My Goal: I have an ALV Grid which I want to display using the ZEBRA style in the layout and also make one field in the field catalog editable.
My Issue: As soon as you make one field editable in the field catalog using the EDIT option, the ZEBRA style in the layout does not works. I also have key fields in the ALV Grid which I want to keep as KEY and which get painted dark blue.
I can't use the individual row coloring method used in the reference link above since this overrides the blue coloring of the key fields in the ALV. I haven't gone through all the effort of individually painting each cell on the grid, and honestly I don't think it is efficient.
My Question: Is there a way to have editable fields in the ALV Grid and keep the ZEBRA setting working?
Please, I will really appreciate if you can read and try to understand my issue before posting incoherent solutions or answers. I don't want to waste anybody's time nor mine.

Shiva,
Thanks for your reply; it someway addresses what I am looking for. Unfortunately, I've already went through that reference code; it has exactly the same problem that I am facing.
If you take that code for example, and you throw it u201Cas-isu201D in your ABAP editor you'll see that even when the ZEBRA style is being used in the layout, since the EDIT option in the field catalog is being set for field NETPR, the ZEBRA style gets lost; only the whole editable column gets white. You can go ahead and play a little bit with that piece of code and you will see what I am saying.
Regards

Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

ALV Report Displaying QUAN field different in systems

Hi Guys,
I have a field of type QUAN (quantity) on an ALV report that is displaying differently on the Devlopment and QA systems.
If I enter the value '5' in this field in Development and press enter, the value displays as '5.000'. If I enter the value in the QA field, however, the value displayes as '0.005'.
I have looked at domains and everything, but they seem simmilar.
Please advise fi there is something I have overlooked,
Thank you,
Christiaan

Hi,
Check in system default parameter settings. It works based on system default parameter settings.
System => User Profile => Own Data
In *Defaults* tab check the *Decimal Notaion* field.
Regards,
Shankar.

Problem with Crystal Reports not displaying all parameter values

Hello,
A co-worker of mine is developing a report in Crystal version 11.5.8.826. One of the requirements from his user is that they would like to select from a list of users for applicable criteria to appear in the report. He created a parameter with a dynamic list of values, entered prompt group text, selected "existing" as the data source (and chose the corresponding field from the table). This dropped the UserID field into the "value" field in the table and linked the table to the parameter. We selected "allow multiple values" as "true" and "allow discrete values" as "true".
Here is the problem. When Crystal prompts us to select the parameters, it doesn't show all of the applicable list of users (it shows 8 out of 12 users). When we run the query in a standalone sql generating tool (Toad or Golden), we see the full list of users. Crystal Reports appears to be filtering the selection list of users for some unknown reason. We have tried changing most every option that we could find within the parameter, but no luck.
The problem definitely appears to lie within the parameter- if we run the report without the parameter, we see the full list of users. Once we add the parameter and attempt to select one or many users, the problem appears.
Any thoughts? What am I missing? Any help is appreciated.
thanks,
Noel

I'll answer my own question in case somebody is curious or happens to find this message via google or another search engine. See this link. You need to set your upper threshold within your Registry Editor.
http://www.crystalreportsbook.com/Forum/forum_posts.asp?TID=8029

Spry image gallery with filmstrip - how to display all thumbnails?

Hello,
I'm using the Spry image gallery with filmstrip and want to be able to show all thumbnails. So instead of scrolling across to see all the thumbnails I would like to display them in a couple of rows. I thought it would be a case of changing the css from overflow: hidden to overflow: visible and increasing the height but this didn't make a difference.
An example of my gallery is here http://www.demo.femmewebsites.com/gallery.html (This site doesn't have many thumbnails but I have others with 20+ images that need to be displayed)
Your help would be much appreciated.
Thanks

Hello Krista,
did you have a look here: http://labs.adobe.com/technologies/spry/demos/pe_gallery.html, where you will find DW "Photo Gallery Demos". In every demo, are arranged a large number of images in several rows and rows. Therefrom you can use their source codes.
Hans-Günter

WMIC Output not displaying all fields

I am running some audits to get hostname, ip and macaddress for a large number of machines. My plan is to run these commands and typing out the file. the problem lies in the second command is not getting inputted into the file and I am not sure
why.
wmic computersystem get name
wmic nic where netenabled=true get netconnectionID
wmic /output:C:\RDFD\wmictest.csv nicconfig where IPEnabled=True get ipaddress, macaddress /format:csv
My output looks like this, data is there I have removed personal info.
Node,IPAddress,MACAddress
hostname,{IPV4;IPV6},MACaddress
So my question is why is the netconnectionID not getting inputted into the file? Running the command by itself yields a good result. As a secondary question, is it possible to remove the header from the file? Right now I am for lopping it with this
as there is a blank line before the header too.
for /F "Skip=2 tokens=*" %a in ('Type c:\wmictest.csv') do @echo %a

Hi Rougeherring,
>>We hope to get hostname, interface name, macaddress into a nice comsumable format.
If you want to achieve above with cmd, I think it's difficult, because netconnectionID and macaddress are from different commands. If we need to combine all the results to one csv file we need to use append. however, the
properties from different commands are different, so the header of the output is broken.
I think using command is hard to keep the nice format.
Conversely,When using Get-WmiObject in Windows Powershell to connect to a remote computer, The remote system does not need to have Windows PowerShell installed. This allows you to administer operating systems that are not running Windows PowerShell,
but do have WMI available.
$nic = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName "remotecomputername" -Filter IPEnabled=TRUE| Foreach-Object{
$nac = @($_.GetRelated('Win32_NetworkAdapter'))[0]
New-Object PSObject -Property @{
Node = $_.PSComputerName
MACaddress = $nac.MACAddress
IPAddress = ($_.IPAddress -join ', ')
NetconnectionID = $nac.NetconnectionID
$nic|Export-Csv d:\test1\wmi.csv -NoTypeInformation
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can I display or export a list of all field names on a PDF

In Designer 7, is there a way to display all field names (text fields and checkboxes)? Or is there any way to obtain a list of all field names used on a form?
In Acrobat 7, all the field names used on the PDF will appear when you select the Text Field Tool. However, this will only happen when the fields were added using the form tools in built into Acrobat. These forms tools are not accessible in Acrobat when the PDF was created using Designer.
For a PDF created with Designer, you can hover over a field in Acrobat to have a ToolTip display the field name. Unfortunately, this can only be done one field at a time.
Thanks in advance for any info.

Here is an example of how to get all the form objects' names within a node in the hierrachy. For a more complex form (with subforms), you will need to check to see if the node is a container. If it is, you will to use this code below to iterate that node.
var objNode = xfa.resolveNode("xfa.form.form1.page1")
for (var i = 0; i < objNode.nodes.length; ++i)
app.alert(objNode.nodes.item(i).name);
Here is an example:
http://66.34.186.88/LiveCycleSamples/.3bbb371.pdf

How to include change delete and insert options in alv grid display

Hi,
As per my requirement I need to display my output in grid.
When the user makes any changes to any field of the alv it should get reflected in the tatabase table.
Similarly according to the requirement if user enters a new coloumn to the alv or deletes one or more rows of the alv,same should be reflected in the databse table.
I know there are many methods in object oriented.
But its little bit tough for me to implement..
Please suggest how to code for it without oo concepts.
Thanks ,
Smriti

Hi,
use FM with Edit functionality enabled for all fields and
Create one pf-status with some buttons
if user presses the button the alv output table should be saved and same table can be used to insert /modify /delete the dbtable.
and check this link
[alv list|alv list]
Regards,
Nandha

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Popup with generic ALV to display all fields of a structure

Similar Messages

Maybe you are looking for