Problem with Change Document FM - Not all fields are tracked in CDPOS

Hello everybody,
Using transaction SCDO and following necessary steps described in forum, I have created a change document ZFBR to track changes of a table ZFBR. The problem is, the generated FM ZFBR_WRITE_DOCUMENT does not track changes of some fields of the table (inserts are always ok, problem is with updates). After some debugging I realized that the FM DDIF_NAMETAB_GET was returning the table DFIES_TAB where the LOGFLAG was empty for some fields (which are not tracked) so that changes of these fields were not visible in table CDPOS. However, fields with LOGFLAG = 'X' are tracked succesfully (changes are visible in table CDPOS).
I did not specify any fields to be get logged or not during the steps in SCDO (can we do such a specification anywhere?), does anyone know why the field LOGFLAG has the value '' (space)?
Best regards;
Ozcan.

Hi again,
The problem has been solved.
The data elements used in a table are the reason for the problem I have described above. When displaying the details of a data element, under tab "Further Characteristics" , the "Change Document" checkbox has to be selected to enable change document tracking. I have copied the problematic data elements with Z prefix and made the necessary enabling. I have replaced the data elements with their Z equivalents.
Best regards.
Ozcan.

Similar Messages

Issue with DEBMAS IDoc,not all fields are reflected in the IDoc Seg E1KNB1M

For IDoc type DEBMAS, there is a segment E1KNB1M. This segment is relate to the customer correspondence details (XD02 -> company code data -> Correspondence).
For any change to the customer master a DEBMAS IDoc is triggered which has data in segments including the E1KNB1M.
In my case for few customers, the not all fields in the segment E1KNB1M contain data. Few fields contain data but the rest are filled with u2018\u2019. This is happening only in the production system, for the same customer in the quality system the data is there as required.
I checked in debugging, and found that the data is correctly passed to the segment in program SAPLVV01 Include LVV01F01. And the segment contains data till the IDoc is triggered. I.e. the fields are not getting cleared at any point.
Can anyone suggest what is happening and how to fix this? Please note that the issue is only in the production system and not in the quality system ( for the same customer).

BTT... Need some help on the above

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Loop at screen - not all fields are available

Hi all,
I want to set some fields on the screen invisible.
When I do the loop at screen in PBO not all fields from the screen are available.
Just four fields are available. In the screen there are about 20 fields.
I try to use the chain. field xyz. endchain... But it was not the problem.
Any ideas?
regards

Try this ,May be Help ful
{ SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_cars.
PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_toyota .
PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_ford .
PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(10) FOR FIELD r_bus .
PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_volvo .
PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 20(10) FOR FIELD r_merced .
PARAMETERS : r_merced RADIOBUTTON GROUP rgb2 DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT. " AT SELECTION-SCREEN OUTPUT
IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
    LOOP AT SCREEN .                       " Looping at screen
      IF screen-name CS 'R_VOLVO' OR
         screen-name CS 'R_MERCED'.
        screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN .
      IF screen-name CS 'R_TOYOTA' OR
         screen-name CS 'R_FORD'.
        screen-active = 0.
      ENDIF.
      MODIFY SCREEN.
    ENDLOOP.
ENDIF. }

Problems with data merge (CS4) - puts all fields in one

Data merge is acting very weird, I have a standard textfile of six columns exported to .csv. When I import it in InDesign it puts all fields in one place (see image) and it becomes totally useless. Has anyone had this problem and if so, how did you solve it?
Thank you!

It is a regular textfile (http://www.pixentral.com/show.php?picture=1k0bmos4r2l7lCtegA1CGHIcw98jrM
) divided into columns...
28 apr 2009 kl. 23.00 skrev Peter Spier:
I took a look at the image, now that it's out of the queue, and the
fields seem to be seaparted by semi-colons. How did you make the file?
>
ID recognizes comma-sparated (CSV) or tab-delimited text files.
>
Peter
>

Not all fields are getting updated in transformation

Dear all,
Please help me in the following issue:
I have the following scenario:
DSO1 and CUBE1. From DSO1 to CUBE1 I have transformation. Fields are mapped one to one.
Some of the fields are getting updated in transformation (22 fields) and some of them are not updated in transformation. (2 - storage location and steel grade).
The fields exist in DSO 1 but don't go into cube.
I did the following:
1. deleted transformation and dtp, recreate = > not working
2. copied the cube, and create new transformation and DTP...not working.
Any help would be appreciated
Thank you
Ramona

Hi Ramona,
Storage location (standard infoobject 0STOR_LOC) has plant as compunding object, check whether this is the issue ? (may be check with Steel grade infoobject also).
Else, do some RSRV checks on the DSO and Infoobject, if it doesn't bring up any issue, raise a message with SAP.
Check your BW Support Pack level , is it the latest ? Give more details about the scenario ?
Cheers,
CK

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?

Hello there, AntRambo.
The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And also the following:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Particularly but not exclusively of note:
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Hello. Having a problem with skype. i am online, all buttons work, however i can not make a video call the button simply doesnt work. Messages works. voice calls works. Please help.

Sounds like you need to contact skype.

Licensing problem with UCCX 7, agent not able to login at all

Hi there,
We have UCCX 7 server and CUCM 7.
Problem is that we the agents are not able to login and they are getting maximum license error although not all licenses are used.
We get the following errors when trying to login:
1. "Maximum number of licenses reached. Please notify your System Administrator".
2. When we click "Ok" for the error above, we get the following "A licensing error has occured. Please try again in five minutes. If the problem persists, please see your log file or System Administrator for details.".
I checked the licensing service and it is working fine.
The log for the licensing service is not indicating anything, it shows only the last time there was a failure in this service (this was 6 months ago after a restart). It was working fine until yesterday.
I tried to disable the "IPCC Extension" under the User Configuration in the CUCM and enable it again, but did not solve the problem and got the same error.
It is worth to mention that when I disabled the "IPCC Extension", before I enabled it again, I tried to login using CAD but I got the same exact error.
Any help will be really appreciate, thanks a lot.

Hi
Open a command prompt on your UCCX server (not client) and go to this directory:
C:\Program Files\Cisco\Desktop\bin
Then run:
showlicenseusage.exe
THis will show you the IP addresses that are currently consuming licenses. You can check these PCs to see if they are still logged in - if they are, that's your problem. If they aren't, then you may have a problem with the LRM service or something.
If it has logins listed that aren't really logged in, you might be able to restart the License and Resource Manager service from Control Center to resolve it temporarily.
Aaron
Please rate helpful posts..

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

SSRS 2012, SQL Server 2012. Problem with changing database

Hi all!
I have a problem with changing database for SSRS.
I have a SSRS 2012 and SQL Server 2012. These programs is on WIndows Server 2012.
I need to link SSRS to the new database instance. For this I run SSRS Configeration Manager, open tab Database, click Change Database. Then I choose option "Choose an existing report server database", click Next, write the server name, test
connection (it's successed) and push Next again. Then I see this error message:
Error
The feature: "Using other editions of SQL Server for report data sources and/or the report server database" is not supported in this edition of Reporting Services.
OK
I'm confused, cause I have compatible versions of programs and THIS error.
Please, help me.
Thanks.

Hi Kirill,
From the error message, we can know that the issue may be caused by incorrect editions of SQL Server for report data sources are used as the Report Server Database.
When creating a report server database, please be aware that not all editions of SQL Server can be used to host the database. So we should make sure that we have used the correct database as the
Report Server Database. For more details, please refer to the “Report Server Database Server Edition Requirements” section in the following document:
http://technet.microsoft.com/en-us/library/cc645993.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

How to get terminal address along with Change document header

Dear All
My client want a report of the frequencies of a sales document changes along with terminal address. In table CDHDR i can get user name, date, t-code but not the terminal address. So requesting to guide me of how to get the terminal address from which terminal the document has been updated.
Appropriate answer will be rewarded.
Regards
Kingshuk
Edited by: Kings_Roy on May 31, 2010 11:02 AM

I don't think this information is kept in change documents. So for the change documents that are already created, you cannot get this information.
For future however you can do some code changes to get this information.
Function module TH_USER_INFO can return terminal name as well as IP address for a given client and user.
All you have to do is either store this additional information along with change documents. For this i think you can check the FMs that are writing SD change documents.
OR
You can use user exit exit SUSR0001 (User exit after logon to SAP System) to call this Function (TH_USER_INFO) at user logon and store this info in a Z table. Later when you are reading change documents, you can get user name, date time from change document and search this Z table for respective user Terminal name and IP Address.
This is not a complete solution but i hope it will direct you to a solution.
cheers.

Having problem with my hp officejet j6480 all-in-one printer

i am having problem with my HP officejet j6480 all-in-one printer it prints very slow
the operating system is windows 7 32-bits i download full driver software but that did not fix the problem
This question was solved.
View Solution.

Hi - Does it print slowly from all applications or just certain ones? In either case, you can try following the steps in this document.
In addition, try going into Control Panel, Printer, right click on the printer and choose Printer Properties. Click on the Advanced Tab and select Print Direcly to the Printer.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

HT1918 problem with changing the payment information

I've got a problem with changing the payment information !!
when I change them and I followed the instruction , and when I click done
it says " for assistance, contact iTunes support at " the link " . and nothing
change , so what should I do ?

Hi Bart,
The description of the field VBKD-BSTKD will appear in sales order (VA01/02/03) Header Order data tab.
If you notice the text for below one it is PO Number where Number starts with upper-case N and it iis not the one which you changed.
Also this is a hyperlink to sales header order data screen.
You need to enhance the code via sales exit to fix this.

Problem with Change Document FM - Not all fields are tracked in CDPOS

Similar Messages

Maybe you are looking for