PORDER object links copying to new version

When a new version of a document is created as a copy of the previous version, the PORDER object  links are being copied to the new version along with the MARA links.  This results in the PORDER record being in the DRAD table but not the DRAD_PORDER table, which ultimately shows the incorrect document version on production orders.  This only happens when the document version is created in a source client and ALE'd to a target client. If we manually create a new document version using a template, we are OK.  Our configuration is set up to not maintain object links via ALE. 
Has anyone else had this happen, or have any ideas on where we can look?
Thank you,
Melissa

I think we found our problem.  In configuration for defining the object links for a document type, we needed to uncheck the Obj Link Target Syst checkbox.   (While still keeping the No Maint via ALE checked).
Regards,
Melissa

Similar Messages

  • Where can i find iPhone service manual link to downloadthe newer version?

    where can i find iPhone service manual link to downloadthe newer version?
    i am not sure which one but wish you can help with some possible links
    in Thai

    Click Support at the top of this page, then click manuals

  • Error message during copy of new version, it says the operation cannot be completed because the item foxfire is in use.

    During downloading of 7.0 Foxfire, during the copy I get an error message that says the operation cannot be completed because the item Foxfire is in use.

    If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

    Dear All,
    Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
    I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
    Can you please let me know how to do this or different options available with this process.
    Thanks in Advance for your valuable time...

    A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • In an older version I could create buttons above the tabs for easy access to websites I chose. Is there a similar feature in the new version?

    In the older version if you clicked on a tab and dragged it to the area directly above the tab, then a button was created. I want to make buttons or preset links in the newer version. Is such a feature or add on available?

    omg I figured it out....Go to the bookmarks button on the right hand side of window (near the home button) click on it, then it has an option that says "view bookmarks toolbar" click on it. You should see a space appear below the web address bar area. You can drag tabs into this area like before. YAY. Hope this helps!

  • Ingest new version with old version archived - Revisited & solved

    I couldn't react to the old thread anymore, but I'd like to share the solution with this forum, because it shows the power of the default functionality in the system.
    Start situation: asset is archived, new version comes in, overwrite is set to 'on'.
    What happens and could happen afterwards: new version 'takes the place' on the hard drive of the old version, new proxies are created, the archive flag on the asset is still on. A restore would place the old version back on the hard drive erasing the new version. No new proxies are created, so original asset would be old version, proxies are from new version. New version - Original Media is lost.
    So this is how I solved it:
    I created a subscription - event type = modified - in which the Asset Filter is set to:
    Archive Status EQUALS Offline
    File Modification Date: the Trigger-if-changed box is ticked.
    The response is changing the status of the asset to 'New Version'.
    A second subsription - event type = modified - has the Asset Filter set to:
    Archive Status EQUALS Offline
    (Asset) Status EQUALS 'New Version' with Trigger-if-changed box ticked.
    The response is:
    1. changing the status to 'Completed'
    2. duplicating the file to another device, "Archive_Exchange" (no Asset, no Proxy created)
    3. restoring the (old) file from the archive.
    A third subscription - event type = modified - is subscribing to a job:
    The job filter is:
    Title CONTAINS 'Restoring'
    Owner EQUALS 'admin'
    Status EQUALS 'DONE' - Trigger-if-changed box is ticked
    plus definition of FROM and TO devices.
    The response is:
    Scan the device "Archive_Exchange"; the only metadata which is set here is:
    Metadata Set equals 'Media' and status equals 'New Version'. No proxies needed.
    Subscription #4 - event type = created - is looking for the newly created asset on 'Archive_Exchange'
    So filter is: Metadata Set EQUALS Media, Device (Stored On) EQUALS Archive_Exchange and status EQUALS 'New Version'.
    The response is this time exactly the same response as when this new version had come in while the old version was not in the archive. So it's copying the new version in the usual device, overwriting the old version and that's it! To keep the temporary device Archive_Exchange clean, there is also a delete response.
    It's a little bit 'Working-around-the-bugs', because why is the system copying the new version to another device, while it knows the Original Media is in the archive, but still, it works and the beauty is: no scripts needed!
    Thanks for your input; it made me understand processes better so I could create this monster.

    There are two basic paradigms that you can use to interact with Final Cut Server files.
    One is to let the filesystem be the master. With this, the original files are sitting in the filesystem, and anyone with permissions can mess with them. FCSvr can see changes (via scans) and update itself accordingly. File names must be unique for anything stored in the same directory.
    The second method is to let FCSvr be the master. In this, you don't mess with the filesystem--all file interactions are done indirectly like through watchers, uploads, and archiving/restoring. File names must be unique, unless you create the device as a contentbase device type.
    Each method can make sense at different times. Generally the second is the safer approach, but the first makes sense like for FCP capture scratch folders and production scans.
    If you upload an asset directly to the FCSvr client application, it will provide you with a dialog box to prevent you from overwriting an existing file if there's a name conflict and it's not a contentbase device. (Nick, it will prompt you even if the old file is archived.)
    If you choose to overwrite, the original asset will be deleted and any archive device instance will be orphaned. If that's what you're doing, I don't understand your issue since you told it to overwrite.
    But if you've mixed paradigms by going behind FCSvr's back (via the Finder or Terminal) to copy a new media file into a place that FCSvr knew was reserved by an archived file and would have prevented had you done it through the client app, then you're asking for trouble.
    Your solution options are: use unique names for files, store them in subfolders that are scanned, or store them in contentbase devices. For the first two you can use the project name or number to help make the file names/folder names unique.

  • Object link selection (Required) by user while new version creation

    Hi All,
    In ECC 6 While creating the new version of DIR ,SAP easy DMS is showing pop up  to select the existing object link , how can we stop this and enable to copy the existing object link in new version which working fine in SAP R/3 4.7.
    Regards
    shiv

    Dear Shiv,
    you can change this behavior in the customizing of the document type in transaction DC10 for each object type.
    Just go to DC10 and mark the affected document type. Then click on "Define object links" and double click on the object type. On the next screen you should see a field called "When New Version". Here you can use the F4 help to choose which behavior you want to have.
    Best regards,
    Christoph

  • Creating new version by copying existing version without originals

    Hi Folks ,
      Is there any way we can control copying Original files & Classifications when we create a new version of document info record using existing template .
    I have a situation that I need to copy all the information ( Like description , Object links etcc) of a existing document info record except the Classifications & Original files. This is required since the newer version of the document should have newer version of Original file attached on it.
    Any input will be highly appreciable & rewarded.
    Thanks & regards,
      Ramesh babu .P
      Fujitsu consulting , US .

    Hi Ramesh,
    you can control this in the document type customizing in transaction DC10.
    1. Choose the relevant document type
    2. Go to folder "Define object links"
        Here you can see all the maintained objects which you can link to this
        document type.
    3. Select the relevant object
    4. double click this object to display the details
    5. By "When new version" you can choose between:
        - Selection by user
        - Ignore link or
        - Copy link automatically
    This will control what happens with existing object links when you create a new version.
    I hope this information is useful for you.
    Best regards,
    Christoph Hopf

  • New version of object popping up on Deletion of T Code

    Hi
    I removed a Tcode from a role. This Tcode does not have any other object besides S_TCODE. However on exclusion and choosing Expert Option / Read old status and merge with new data, i see that there is a new version of a object has popped up in "NEW". The older version of that object is in the Changed mode.
    From this I understand that if a standard object is changed then every time "Read old status and merge with new data" is chosen SU24 is re-read to pull out the standard object...  Am i correct here?
    If the above is true then as a standard practice is it right to may inactivate the standard object and manually add that object again or copy that object to bring in a new version of that object.... -
      is this right?
    Please advice
    - ravi

    Hi Ravi,
    When ever you add a new tcode to a role, make sure you add the tcode in the menu of the role so that the role will pull all the authorization objects check/maintained against the tcode.
    When you delete a tcode then it will automatically deletes the authorization objects associated with the tcode.
    If you do a merge with new authorization data, then the role will get the new authorization objects if newly check/maintained for any tcodes from SU24.
    The best practice is to always have standard/maintained authorizations for the authorization objects in the role. Manual additions of authorization objects is not advisable unless if the business requires so.
    Please reward points.
    Regards,
    Kiran.

  • Hello All, I have an older MAC and currently have iPhoto 09, version 8.1.2. Every time iPhoto is opened I get a message about a upgrade to a newer version of iPhoto, but when I select the link, it takes me to the Apple website and says the page I'm look

    Hello All,
    I'm Gene. I have an older MAC desktop and am running iPhoto 09, version8.1.2 (424). Each time I connect my iphone to my MAC I get a message that there is a newer version of iPhoto, but when I select the link, I am taken to the Apple webpage and get a message that the page I'm looking for is not available. All I would like to do is upgrade my iPhoto. Do I need to upgrade to the latest version of iWork, and if so, what version and how would I do that? Any assistance is appreciated. Thanks

    The iPhoto version that is currently available at the App Store os 9.5.1 and requires the Mavericks OS X.  The early 2008 24" iMac can run Mavericks.  Once you have Mavericks installed (it's free)  you can purchase iPhoto 9.5.1 from the App Store.
    If you don't want to upgrade to Mavericks you can purchase a copy of the iLife 11 disk from a 3rd party retailer like Amazon.com and install iPhoto 9.  Then up trade it to 9.4.3 via the updaters at the  Apple Downloads website: Apple - Support - Search
    OT

  • Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

    Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
    re-install Itunes and what version??

    Refer to this thread - https://discussions.apple.com/message/15685210#15685210
    Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

  • To add new object link in DMS

    Hi Sir/Madam,
    Currently we are implementing DMS(Document Management System) and
    our main requirement is to add document to the delivery and billing
    document.In t-code dc10 in "define object link" lips and vbrp object is
    not present in the default list so how we can add these new object in
    order to attach new document to delivery as well as billing document.
    Is it possible to attach document at header level because we have to
    attach lorry number at delivery header which will be common for all the
    items.
    The function module object_check_lips already exist in se37 but we
    have to create new function module for object vbrp.How to create this
    function module? How we have to create screens for these objects? If we
    have to create it by copying some function module like
    object_check_equithan what will be the funtion group.
    IN delivery document (vl03n) in menu bar in "extras" document
    option is not there than how we will see the attached document, do we
    have to create this option with help of abaper or this option will
    automatically reflect after all the cofiguration?
    Thanks and Regards
    Abhilash Nayak

    Hi Abhilash,
    You need to gofor z-development for this. The Abap'r will add the new required object in object link field. Also the DMS screen will appear in the required t-code.
    Meantime you need to add this object in SPRO , "maintain key fields".
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Maintain Screen for Object Link - New Object

    Hi
    We want to create new object link  ( not standard SAP) in our company.
    I try to add new screen for link other SAP object  : SE80 ---> Package : CV --->
    Function Group : CV130 , add new screen . It seems as REPAIR , Ask me for access key .
    Is it OK?
    Help Activities:
    f the screen entry contains errors or you want to add a new entry you
    an check the existing screen sas follows:
       Start a second mode and execute the following steps:
       -   Start the Object Navigator.
       -   Display the objects for development class CV
       -   Expand the function group 130
           The structure notes screens lists all screens that can be used
           for an object link
       -   Find the screen for the object link (such as 1201 for material
           link).
       Process the activity Maintain screen for object link in the first
       mode.
       -   Correct the entry or add an entry for the the object you want to
           add to the document link.
    Thanks, Meira.

    Hi Dave,
    First of all you didn't mention which version you are using and Which Real Estate you are on. there are 2 RE
    1. Classic Real Estate (Real Estate)
    2. Flexible Real Estate Management
    Now coming to Question
    for Flexible Real Estate Mangement the path is
    SPRO---->Flexible Real Estate Mangement (RE-FLX) -
    >General Setting for Master and contract -
    >
    Document Mangement -
    >Document Mangement System -
    >Maintain Screen for Object Link
    The above path is for ECC 6.0
    Thanks
    Veman.

  • Transporting of z objects form Older version(4.6c) to newer version(ecc6.0)

    Hi All,
    Now i am involving in Technical Upgradation from 4.6C to ECC60.I want to know some information regarding  transportation of Z objects in older version to newer version(ECC6.0).Please help me in this regard.
    like tables,dataelements,domains,reports,scripts,smartforms,userexists,Variants,report layouts(all are z objects),text elements.In the above list which will be transported automatically and regarding which abapers have to takencare i mean to say which will be not transported automatically...
    and tell me obsolete keywords information..which will be obsoleted in ECC6.0...
    thanks in advance
    awaitinf for reply..
    Points will be Rewarded for helpfull Answeres
    Thanks & Regards
    Samit

    Hi Julio,
    you can find the answer in the SAP note
    Note 552711 - FAQ: Client copy
    point 4.
    So the answer is : NO
    Kind regards
    Imre Takácsi-Nagy
    Senior Support Consultant II.
    SAP Global Support Center Austria
    Netweaver WEB Application Server ABAP / JAVA

  • Add New Object in a DMS Object Link

    Hi everybody,
    i am trying to create an object link to Service Entry Sheet.  (tcode: ML81N, ESSR-LBLNI)
    by sap instructions i did this step:
    "You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130."
    and this step:
    Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
    I have done above step .
    I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
    I created Function Module OBJECT_CHECK_ESSR.
    After this What I have to do for displaying  ESSR object in DMS as Object Link. 
    Please Guide me as soon as possible.
    Thanks
    Pranesh

    Hi,
    Since I think you already followed the below steps :
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    Kindly go through the below once :
    Link :[http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/3fe93bad3ce333e10000000a114084/frameset.htm].
    you define the object link in DMS customizing
    e.g.For EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" Then link EBAN to your document type
    Hope it helps you.
    Thanks
    Arbind
    Edited by: Arbind Prasad on Feb 24, 2011 5:46 PM

Maybe you are looking for