Add New Object in a DMS Object Link

Hi everybody,
i am trying to create an object link to Service Entry Sheet.  (tcode: ML81N, ESSR-LBLNI)
by sap instructions i did this step:
"You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130."
and this step:
Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
I have done above step .
I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
I created Function Module OBJECT_CHECK_ESSR.
After this What I have to do for displaying  ESSR object in DMS as Object Link. 
Please Guide me as soon as possible.
Thanks
Pranesh

Hi,
Since I think you already followed the below steps :
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Kindly go through the below once :
Link :[http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/3fe93bad3ce333e10000000a114084/frameset.htm].
you define the object link in DMS customizing
e.g.For EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" Then link EBAN to your document type
Hope it helps you.
Thanks
Arbind
Edited by: Arbind Prasad on Feb 24, 2011 5:46 PM

Similar Messages

  • To add new object link in DMS

    Hi Sir/Madam,
    Currently we are implementing DMS(Document Management System) and
    our main requirement is to add document to the delivery and billing
    document.In t-code dc10 in "define object link" lips and vbrp object is
    not present in the default list so how we can add these new object in
    order to attach new document to delivery as well as billing document.
    Is it possible to attach document at header level because we have to
    attach lorry number at delivery header which will be common for all the
    items.
    The function module object_check_lips already exist in se37 but we
    have to create new function module for object vbrp.How to create this
    function module? How we have to create screens for these objects? If we
    have to create it by copying some function module like
    object_check_equithan what will be the funtion group.
    IN delivery document (vl03n) in menu bar in "extras" document
    option is not there than how we will see the attached document, do we
    have to create this option with help of abaper or this option will
    automatically reflect after all the cofiguration?
    Thanks and Regards
    Abhilash Nayak

    Hi Abhilash,
    You need to gofor z-development for this. The Abap'r will add the new required object in object link field. Also the DMS screen will appear in the required t-code.
    Meantime you need to add this object in SPRO , "maintain key fields".
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

  • New object link in dms (audit)

    Hello,
    i have to open new object link for AUDIT for DMS.
    any information ?
    thanks,
    avi.

    Hi Avi,
    Define the Object link types for the object links which you want to maintain. Please check whether the Audit type is available in the Object link types or not.
    Regards,
    Nishit Jani

  • To add the object link at a time more than 13 line items

    Dear All,
    Can you help me regarding the below statment.
    In object link in cv01n and cv02n t-code have limitation to add the object at a time 13 line items. If you add the more than 13 line items it takes  time. If there is any provision to add the more than 13 line items at a time.
    Thanks
    Asutosh

    Hi,
    In transaction CV02N unfortunately this is not possible to enlarge the line number. To add a lot of objects to a document info record you may use DMS BAPI_DOCUMENT_CHANGE2. You can use BAPI_DOCUMENT_GETDETAIL2 to read out the current document data and then hand over to BAPI_DOCUMENT_CHANGE2, where you can add new objects in table 'OBJECTLINKS'.
    Best regards,
    Christoph

  • How to Add New Object?

    HI,
    Any body can say how to add new object. For Example: The Document need to link with Invoice Transaction (T.Code: VF01, Table: VBRK/VBRP).
    Points will be rewarded, if information is useful.
    Tks
    Mani.

    Hi
    You can create New objects using the T.code: SE80.
    You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
    1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
    You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
    2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
    Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
    Regards
    S.Sivakumar
    Reward points if useful----

  • How to add new object class to a material ?

    Hi experts,
    I have to add new object class to a material ( classification class ) and then add new characteristics values for the material ....But i do not know which FM to do this , If you please to give me the solution for this problem
    PS: rewards immediately
    Thanks,

    Hi,
    Check this  CALL FUNCTION 'CLVM_CLASS_BOOK' Run it for IN UPDATE TASK
    Reward if useful,

  • Get error when add new object in crystal report

    hi
    i have this error "You are attempting to use functionality that falls under the Crystal Decisions Report Creation API license. This system does not have a valid license, or the evaluation copy of the license has expired. Please contact Crystal Decisions to obtain a Report Creation API license."
    when i add new object in crystal report with vb.net
    ""CRReport.Sections.Item(ii).AddTextObject("new text", 1000, 0)
    i do same program for 3 months ago but i lost it work without error
    ihave a license key for crystal report
    use cr10 with vb.net 2005
    can help me
    thanks

    Also, check out the blog [Use of the Report Designer Component (RDC) in VS .NET|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID0468837450DB00359707053703393347End?blog=/pub/wlg/15939].
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup

  • How to add new Object Type In Mass

    Hi Expert,
    We have to required change Payment term of Customer (ZTERM) in scheduled Agreement,
    we have gone through Mass, but presently no object type available to change in scheduled Agreement, So can we add the new object in Mass? & How? Please help.
    Regards
    BK GAIKWAD

    Hi,
    Presently no standard object type avaialble for Sch. agr.(Sales)
    Go for BDC for updation of your field (try with LSMW also)
    Thanks
    Chidambaram

  • Is there a way to add new objects to object changeability list?

    My production system is locked and I need to change object type RSFO (formula). I looked at the object changeability list and it does not contain RSFO. Is there a way to add this object to this list so I can change it directly in production? Thanks.

    hi,
    I hope you can create similar formula in the production. as in the production we can change the reports,proces chain,aggregates, infopackages.
    Ramesh

  • Archiving Object SOBL - New Object Links Package

    Any one has experience on this archiving object?
    Is it necessary to run this archive object? or the object relationship is archived when the object is archived.
    if we do need to archive this object, how can we sure it does not cause data lose. I tried to run this archive object it selects records which linked objects are still active!

    Alberto,
    Can you explain what you are trying to do. Are you trying to archive data from a BI object or are you trying to export data out of a BI object using open hub.

  • Best way to add new objects to a Group?

    I have been trying to figure out how to keep things organized in the timeline. Which is very important when you get very complicated.  If I pick a group and then an obj and hit the group tool,  it makes a new group instead of just having it added to the original.  The only work around I have found is to ungroup the first group and then everything is nested in the new group.  That is a pain.......I would love to just select an object with my middle mouse, just drag it into a group in the timeline.  Or is there an easier way?
    Don

    I have been trying to figure out how to keep things organized in the timeline. Which is very important when you get very complicated.  If I pick a group and then an obj and hit the group tool,  it makes a new group instead of just having it added to the original.  The only work around I have found is to ungroup the first group and then everything is nested in the new group.  That is a pain.......I would love to just select an object with my middle mouse, just drag it into a group in the timeline.  Or is there an easier way?
    Don

  • Can i let user to add new objects without any programmin​g requiremen​t??

    Hi,
    I am doing my final year project on wireless data acquisition & building
    automation. Simply just a computer which can control building equipments &
    receive the status.
    I want my program to be flexible so that when there are new equipments
    added to the building, the user can add those equipments control in the
    computer side software. (I expect the user don't know how to user labview
    for programming). For example, if a water pump is added in the building, the
    user can just add a new control for that water pump by just click on a few
    buttons and set the equipments address.
    Any suggestion??
    Best regards
    Calvin

    Hi Calvin
    The only way I know of generating controls/indicators like that is using an
    array of controls (or an array of clusters, each clusterr containing a set of
    controls), and dynamically changing the number of elements in the array. You
    can then set some of the attribute node properties such as the index that is
    visible at the top left of the array control, and the number of rows/columns
    that are visible. However, it means that each new control set you create has
    to be the same as all the others (because it is an array).
    Paul
    Research Assistant
    School of Physiotherapy, Curtin University of Technology
    Selby Street, Shenton Park, Western Australia, Australia. 6008
    email: [email protected]
    Tel. +61 8 9266 4657 Fax. +61 8 9266 3699
    "Everyone who c
    alls on the name of the Lord will be saved." Romans 10:12
    "For all have sinned and fall short of the glory of God, and are justified
    freely by his grace through the redemption that came by Christ Jesus." Romans
    3:23-4
    Calvin wrote:
    > Hi,
    > I am doing my final year project on wireless data acquisition & building
    > automation. Simply just a computer which can control building equipments &
    > receive the status.
    >
    > I want my program to be flexible so that when there are new equipments
    > added to the building, the user can add those equipments control in the
    > computer side software. (I expect the user don't know how to user labview
    > for programming). For example, if a water pump is added in the building, the
    > user can just add a new control for that water pump by just click on a few
    > buttons and set the equipments address.
    >
    > Any suggestion??
    >
    > Best regards
    > Calvin

  • Re: Add new object class

    Dear all,
    I have created my own object class which inherited from objectclass "person" and I assign it to every user in a subtree. After then, I found that the option "edit with custom Editor" is grayed out! Why is it? How can I enable the option?
    Thanks!
    Joe

    Hi,
    Check this  CALL FUNCTION 'CLVM_CLASS_BOOK' Run it for IN UPDATE TASK
    Reward if useful,

  • Add ESSR Object in a DMS Object Link

    Hi everybody,
    i am trying to create an object link to Service Entry Sheet. (tcode: ML81N, ESSR-LBLNI)
    by sap instructions i did this step:
    "You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
    The processing logic must follow that of screen 1204 in program SAPLVC130."
    and this step:
    Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
    I have done above step .
    I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
    I created Function Module OBJECT_CHECK_ESSR.
    After this What I have to do for displaying ESSR object in DMS as Object Link.
    Please Guide me as soon as possible.
    Thanks
    Pranesh

    Hey Pranesh
    Go to IMG -> Cross-Application Components -> Document Management ->  Control Data -> Maintain Screen for Object Link
    Add the SAP objec and Screen
    Go to IMG -> Cross-Application Components -> Document Management ->  Control Data -> Define Document Types
    Choose the document type you want to add the object link
    Define object link
    and add object and screen number
    BR/Håkan

Maybe you are looking for

  • Open Letter to Creative La

    I've sent this via snail mail as well and sent it to by email to the few email Addies I can find. I hope some one gets it. Dear Creative Labs ?This is to inform you that I have become very disappointed in both your products and your customer service.

  • Anchored text newbie - help!

    Hello all ... I am beginning to explore the possibilities using anchored text. I lay out a range of self-help books containing quotes which are cut and pasted into a separate text box in the margin of each page. Firstly this is time consuming and sec

  • Drag/Drop inside SWFLoader not working

    I've got a Flex application that loads a secondary Flex app via SWFLoader. The secondary app uses drag/drop operations to rearrange components, delete them etc.  The secondary app works perfectly while it is running by itself (eg. not 'embedded' via

  • ERROR: Context Value Management Failed

    Hi, While running autoconfig, i am getting below error ================================= ./adautocfg.sh Enter the APPS user password : Context Value Management will now update the Context file Exception in thread "main" java.lang.NoSuchMethodError: o

  • Workflow Send an mail _SPOCacheRead; _SPOCacheFull

    I have a workflow who needs to send update (as an alert) to those users having read access only. My list has unique permissions for each item and I need to make sure that only those who have access to the item get the email. As of now I send the item