Port 8080: I know this is simple, I just can't get it to work.

I'm trying something that I'm sure is relatively simple. But I just can't get it to work. I have OSX Server 10.4.10. I currently have my company site (www.example.com) hosted on it. But I'm trying to get another site hosted on it at port 8080. When I enter my company domain, www.example.com:8080, the page can't be displayed. But when I enter the IP address, such as 192.168.xxx.xxx:8080 from within my network, the correct site shows up. How can I get a website displayed at port 8080 from outside my network? I'm running DD-WRT on my router and have ports 80 and 8080 directed to the IP address of my server.
Thanks in advance for any help.

Hi WiFiNetGuy-
I am a tad confused, which isn't new, but I need to get a grasp on exactly what it is that you are trying to do.
Do you have both websites (i.e. www.example1.com and www.example2.com) both pointed at the same ip address? How many unique domain names and ip addresses are we talking about?
From what you describe it sounds like a routing issue but I need more info (:>)
Luck-
-DaddyPaycheck

Similar Messages

Making a join seems simple but I can't get it to work

Hi All,
I have 2 tables LUGallery and LUSubGallery, the tables are related by the GalleyID field
LUGallery
Gallery ID
ClientID
GalleryName
5
50
Australia
8
50
Weddings
12
33
Portraits
4
33
Landscapes
LUSubGallery
SubGalleryID
GalleryID
GalleryName
67
5
NSW
68
5
QLD
69
8
Reception
70
8
Location
87
8
Ceromony
97
4
Rain Forest
What I am try to do seems simple but I can't get it to work the way I want it.
I am trying to write a query to display Galleries from the LUGallery tbl that have a Sub Gallery attached to them (ie. It's GalleryID appears in the LUSubGallery tbl)
So the query for the above example would list Australia, Weddings & Landscapes
I have tried to write code both with inner joins and nested queries but just can't get it right,
Any help would be greatly appreciated.
Thanks in advance
Kris

I just want to
display the GalleryNames from the LUGallery tbl once
Then you probably do not want include all the extra columns from the LUSubGallery table.
It returns all of the records from both tables that Have
the same GalleryID
That is the way this type of JOIN works. It will return one record for each matched GalleryID. If you only want to display the unique gallery names you can either:
1) Use an EXISTS clause. It will return the distinct records from the main gallery table IF a matching record exists in the LUSubGallery table
--- Not tested ---
SELECT LUGallery.GalleryID,
LUGallery.GalleryName
FROM    LUGallery
WHERE   EXISTS (
        SELECT *
        FROM LUSubGallery
        WHERE LUGallery.GalleryID = LUSubGallery.GalleryID
http://www.techonthenet.com/sql/exists.php
... OR ....
2) Use the DISTINCT operator to return only the unique combinations of the selected columns. Note: DISTINCT considers all columns in the SELECT list . So if you only want unique galleries, do not include the LUSubGallery columns in the SELECT list.
http://www.w3schools.com/SQl/sql_distinct.asp
Message was edited by: -==cfSearching==-

Contexts - Simple yet I can't get it to work

Hi Guys,
A simple question on my behalf, but one that has got me stuck.
In my source structure I have this
<root>
<context1>data</context1>
<context2>data</context2>
<context3>data</context3>
<context4>data</context4>
</root>
What I am trying to do is this:
For each of the first 3 contexts, I need a to transform context4. In my target structure I need this:
<context1> and <context4>
<context2> and <context4>
<context3> and <context4>
Can anyone point me in the right direction with this? I cannot get <context4> to map each time, it only maps with the <context1> and then it does not map with the other contexts.
Can anyone help?
Thanks!

> What I am trying to do is this:
> For each of the first 3 contexts, I need a to transform context4. In my target structure I need this:
> <context1> and <context4>
> <context2> and <context4>
> <context3> and <context4>
>
Can you describe the above thing in more technical way. I mean how exactly your target data will look like. For Ex.
Let's say your source data is
=======
data1
=======
data2
=======
data3
=======
data4
=======
Now are you looking for a result something like this...
==============
data1 + data4
==============
data2 + data4
==============
data3 + data4
==============
If YES, then simply concatenate "data4" with each data... Otherwise let us know what exaclty you are looking for.. Also let us know the occurrence of source & target data.
Regards,
Sarvesh

Browser won't open - greyed out - says trying to restore last session - I am at a total loss on how to fix this-have restarted -- i still can't get it to work

i can't do anything when i open it up - it's greyed out -- have tried everything i can think of -- says restoring last session but never comes on - just says not responding if i try to click on toolbar or anywhere

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls

HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings. I've been reading the help but I don't seem to have a re-install drive for the USB port. Is this something post 2008 or can I get one from somewhere?

Hey Stella,
Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189
All the best,
David

Skype wont open, saying its "not supported on this Aschitecture". How can I get it to work??

Skype wont open, saying its "not supported on this Aschitecture". How can I get it to work??
I have downloaded Skype from its main website for MAC, but still it says " can't open Skype. not supported on this Architecture" when i click on it. I don't know why it wont. This isn't an old Desktop Mac computer, and Skype downloaded with no problems on my Mac Lap top. So what's wrong this time?
Any suggestions would be helpful! Thanks!

Ahh, glad we got that figured out! You might want to make a note for any other problems you want to ask to post in the forum for Power PCs:
https://discussions.apple.com/community/desktop_computers/imac_powerpc
(you posted in the Intel iMac forum)

The air port on my imac went off and i can not get it to work

my air port on the imac weny off and i can not get it to work now

Apple used to use airport name for everything.. is this the internal wireless card?? Or external airport router?
If it is the internal wireless card, is it still listed in system profile.. and do a hardware test with your original CD.
See http://support.apple.com/kb/ht1509
The problems with Mavericks are very great.. if you upgrade installed anything can happen.. a common feature is the internal wireless card fails to work.
Give details and we can figure it out.
Here is discussion about the same thing as I think has happened to your imac in macbook.
https://discussions.apple.com/thread/5219345?tstart=30

Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.

Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

My MacBookPro has a white screen with a grey file folder in the center of the screen with a white question mark blinking in it. What does this mean? And how can I get my computer back up and running normal?

Start up in Safe Mode.
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk.
http://support.apple.com/kb/PH5836
Reset PRAM.
http://support.apple.com/kb/PH14222

I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning it was gone. Can I get my precious work back? Thanks

Hello
I added content to a document in Pages on my Mac last night, which was saved to icloud and this morning the additions were gone. Can I get my precious work back? Thanks

Just thought I'd add my solution, I decided to go with WebDAV and I think it actually works better than the iTunes way, the steps are pretty much the same but avoiding the iTunes interface just makes things easier and faster.
I followed this guide but it does have a small mistake in the httpd-dav.conf file, on line 2, where it's WebServer/WebDAV">, it should be <Directory "/Library/WebServer/WebDAV">.
The tricky part is setting permissions which if wrong will give you errors when connecting with the iPad, I opted to set all to Read&Write since my home network has a hardware firewall. Another convenience was to add an alias to the webdav share on the Desktop.
I'm still expecting the call from Apple but even if they fix the iTunes I'm sticking with WebDAV, atleast until I see what's new with iOS5 and iCloud this fall which should bring true sync for documents (I'm hoping that they will offer encryption with my own keys, if not, then I'll probably keep using WebDAV).

Can't get Mail to work - I get the spinning wheel and Mail freezes. I have to Force Quit it. How do I fix this?

Can't get Mail to work - I get the spinning wheel and Mail freezes. I have to Force Quit Mail . How do I fix this problem?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

The genius bar sold me a LaCie 500 GB EHD today but I can't get it to work properly. Can I schedule another genius bar appt. to help me with this issue even though the EHD is not an Apple product?

Yes, if you purchased it in an Apple store, they should be able to assist you. Bring your MBP with you as well as the Drive.
Ciao.

...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I

..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.

Good day,
How can I help?
Kind regards,
David
Adobe Systems

Port 8080: I know this is simple, I just can't get it to work.

Similar Messages

Maybe you are looking for