Portal Time differs ?

Hi!
Where Portal  gets it's time? I gess that it gets time from the server, but why Portal time can differ several minutes to servers time??? ,server in HP-UX 11.23.
This is problem in BI system, because Portal communicates with SSO to ABAP and if time differs too mutch commucation fails. Portal and ABAP are in same server.
Do somebody know why Portal and server time is not identical?
Regards, Arvo

Hi,
ok...Tell me in portal where you can see this difference?  My mean to say that how you have determined that you have different time in portal?
You have configured the SSO in between BI  ad portal system and if due to this time zone problem, your SSO fails, you can opt for increase the expiry period of the SSO ticket so that SSO does not fails.
With Regards,
Saurabh
Edited by: Saurabh.Arora on Jun 4, 2009 3:02 PM

Similar Messages

  • SAP PORTAL Time-Out Settings / BO iView Reports..?

    We have created BO object-specific iView requests in SAP PORTAL based on Ingo's posting....
    SAP BusinessObjects Enterprise & SAP Enterprise Portal - Part 3 of 4
    Currently, just posting some small CR4E and Analysis for Office (*Design Studio will be added in a few months) report objects that are based on BW queries - and response time is a few seconds.
    However, long-term as our BW grows - and the volume of data/periods expands we may see some reduction in the performance of these reports, and they make take a few-minutes to return data.
    The SAP Portal team already have an issue with an ECC / T-Code report (*no Business Objects involved) which runs over 100 seconds - and hits a Portal time-out....and are wondering if we would hit the same issue if a CR4E within the Portal ran longer than 100 seconds...?
    I think the answer is "NO", the Portal time-out would not apply in that scenario. My assumption is that in our solution-path, the Portal's 100 second time-out rule would ONLY apply to the process of the Portal invoking the iView request - and opening the frame for the CR4E content.
    Once the frame is open - and the RPT / Prompt-Screen is loaded the Portal time-out is "happy".
    After that iView -> BO frame is established....so, even if the CR4E & BW Query took more than 100 Seconds to return/display the data - the SAP Portal would not time-out - as all of that activity is actually taking place at the BOE Platform layer within the frame (and using the time-out settings at the BOE level).
    Can anyone confirm that my assumptions are correct, or explain where the assumption is wrong..?
    Thanks in advance...!

    In our scenario, the SAP PORTAL has a 100 second time-out, but the Business Objects platform where the CR4E content is hosted has a 600 second time-out for "View on Demand" reporting.
    When the SAP PORTAL opens the iView connection, it is opening the CR4E content in a frame on the Portal. Prompts are entered - and the RPT execution begins on the BOE platform.
    There is a "spinning-wheel" displayed from the BOE platform, and if run in BO LaunchPad it could run for up to 600 seconds before a time-out occured.
    When it is presented in SAP PORTAL via iView connection - does that "spinning-wheel" from BOE Platform provide enough of a "heartbeat" to let the PORTAL know not to drop the connection at 100 seconds....?
    My reasoning is that SAP PORTAL should be opening the BOE content with the same rules that apply when the report is opening in the BO LaunchPad.
    We are going to create a "SLOW" report in CR4E (*Lots of charts & sub-reports) to test/compare LaunchPad and Portal display of the same report.

  • Portal Time out

    Hi ,
    I want to set the portal time out , such that if a user is not doing any activity , the portal should log him out(like banking websites)
    Please let me know the steps to do the same
    I found out that it can be set from System Administration --> System Configuration --> UM Configuration --> Security Settings, but i could not find Lifetime of the SAP Logon Ticket option there
    Please help

    hii.
    The termination of the Portal and all Web Dynpro applications as a whole is defined by the Security Session timeout.
    This is an absolute timeout value, e.g. the default is about 27h, that always terminates the whole security session after the defined period of time independtly from any user interaction.
    The expiration of the HTTP sessions is handled automaticaly and does not need to be cared about.
    When the HTTP sessions are created they get the maximum of the application session timeout and the default HTTP session timeout. After the corresponding application session has been destroyed, the HTTP session gets a very small value to expire as soon as possible.
    Go through this SAP NOTE to make the suitable changes:-
    Note 842635
    Also refer to NOTE 842878 for Session Management Information.
    Also use this Links.
    how to set SAP idle session time out
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/epSnippet-Portaluseridletimeoutforlogoff-custom+javascript
    Hope this helps,
    Rewards would be appreciated.
    Mayank Saxena.

  • Calculate the time different of the graph

    Hi,
    How can i get the time different of the section graph by pointing at it as show in attachment .jpg.
    Other than using the cursor, is there any other methods of doing it??
    Attach with my vi & data.
    thanks and regards,
    Simon
    Attachments:
    pattern.JPG ‏119 KB
    sleep analysis.vi ‏20 KB
    Output_Graph.vi ‏16 KB

    Here's the data..
    Attachments:
    sleep analysis.txt ‏1 KB

  • Back up iPhoto 08' for the first time (different than last time I did it)

    The last time I backed up my photo library was before I got iPhoto 08'. I know I should have done it a long time ago and backed things up at least once a week but I kinda got busy. Since my last backup I have also upgraded to Leopard, which yes I did back up my hard drive when I did that, but I also had the advantage of having an IT person personally helping me.
    Today when I went to back up my library things were different. Rather than the old "iPhoto Library" folder that use to be in the pictures section, I just see a single file named "iPhoto Library" and when I click it, it launches iPhoto.
    So my question is how do I back up my library now, and what ever happened to the "Original" and "Modified" folders? What I would really like to do is save my current library on an external with everything intact. Events, Albums, the order I added them in, etc. I want to clear iPhoto out completely and then re-import my current library.
    I should probably mention that on the external hard drive right now is a back up of my old library from before my upgrade to Leopard and it still has the old setup of the iphoto folder and then inside that is the "Original" and "Modified" folders. How should I handle this, just delete it?

    With iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    Want to see inside? Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look familiar? Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    What I would really like to do is save my current library on an external with everything intact. Events, Albums, the order I added them in
    Simply copy the iPhoto Library from the Pictures Folder to the External. That's it.
    I want to clear iPhoto out completely and then re-import my current library.
    I'm afraid that doesn't make a lot of sense to me. If you back up a library then trash it, then restore the selfsame library, how does that constitute a “clear out”?
    I would delete nothing until I had the Maintenance project finished.
    As an Fyi
    There are many, many ways to access your files in iPhoto:
    *For Users of 10.5 and later*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and later* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    For users of 10.6 and later:
    You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and later:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
    Regards
    TD

  • Why is the time different on my iphone4 for messages and reminders to the actual time on my phone

    I have had to set the time zone on my phone manually as it is wrong. so now that shows correctly. However when i set a reminder and get messages. They show up as a different time zone altogether. So my reminders are coming through 12 hours too late. How can I fix this? I have tried resetting the time manually and automatically.

    On your iPhone ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    Then tap Settings > General > Date & Time
    Switch:  Set Automatically ON
    No data is lost due to a reset.

  • What Do You Do When Recording Start Time Differs From Show Start Time?

    I record several series.  My problem is that generally the show begins at 10:01 and that is when the DVR is set to record.  Every now and then the network changes an individual episode to begin at 10:00 (one minute early)... or some variation of this.  In this circumstance, the show does not record.  Is there any way to work around this and ensure that the show records? 
    Solved!
    Go to Solution.

    Douga101 wrote:
    I record several series.  My problem is that generally the show begins at 10:01 and that is when the DVR is set to record.  Every now and then the network changes an individual episode to begin at 10:00 (one minute early)... or some variation of this.  In this circumstance, the show does not record.  Is there any way to work around this and ensure that the show records? 
    Set it to record at any time and that should eliminate your problem. 
    I use the following setting for series recordings and they always record, starting at the proper time.
    Episodes:  first run only
    Start:  on time
    End:  1 minute after
    Air time:  any time
    Duplicates:   no
    Channel:  selected channel
    Some shows may need different start and end time adjustments.  But those work for the series I record. 
    Keep, Save, and Delete settings at your preference.

  • Same BI query multiple times, different variable values ...

    Hi all, Im having a problem executing a BI query multiple times, passing different parameters. What I did is drag & drop the query multiple times (from the "Find Data" section) and pass different variable values from the signal-in of the nested iview that contains all of them, everyone has its own chart view. The problem is, only the first occurrence of the query is showing (only the first chart). I dont know if there is a restriction, or if I am missing something.
    Thanks in advance.
    Daniel

    Hi all, forget about this, it was a problem in the query definition not in visual composer. Im closing this thread.
    Regards.
    Daniel

  • ISE Guest Portal Time Profiles

    G'day All,
    Could someone advise if it is possible to extended or change the time profile of a guest account that has already been created? I am trying to understand using time profiles from within the Sponsor Portal. Imagine a guest user has an account created that gives them 2 weeks access, towards the end of the 2 weeks the user requires another week of access.
    From what I can see in both the ISE time profiles config page and from within the sponsor portal, either the user would have to wait until the existing account expired and have a new account created or a new account would have to be created to grant the additional access, and the existing account could be deleted, I am just seeking clarification of whether time extensions for Guest Accounts is possible prior to the account expiring.
    Currently using ISE 1.1.3
    Thanks in advanced guys.
    James.      

    Please follow the below steps to edite the time profile:
    Adding, Editing, or Duplicating Time Profiles
    To add or edit a time profile, complete the following steps:
    Step 1 From the Cisco ISE Administration interface, select Administration > Guest Management > Settings > Guest > Time Profiles.
    Step 2 Click one of the following:
    • Add—to create a new time profile
    • Edit—to edit an existing time profile
    • Duplicate—to duplicate an existing time profile
    Step 3 Enter the name and description of the new time profile.
    Step 4 Select a Time Zone for Restrictions. Time Restrictions are a set of time periods during which a guest account associated with that time profile would not be granted access to the network or guest portal.
    Step 5 From the Account Type drop- down menu, choose one of the predefined options:
    • StartEnd—allows sponsors to define start and end times for account durations
    • FromFirstLogin—allows sponsors to define the duration of time that guests can have access after login
    • FromCreation—allows sponsors to define the duration of time that guest can have access after account creation
    Step 6 Set the Duration for which the account will be active. The account expires after the duration set here has expired. This option is available only if you select the Account Type as FromFirstLogin or FromCreation.
    Step 7 Set the Restrictions for the guest access.
    These restrictions are composed of a day of the week and a start and end clock time. The Time Zone value specified in the time profile affects the clock times set in any of the Time Restrictions within the time profile. For example, a Time Restriction that specifies Monday 12:00 am to 8:00 am and Monday 6:00 pm to 11:59 pm would only grant system access between 8:00 am and 6:00 pm on Mondays within the time zone of the time profile. Any other day of the week would have no time restriction in this example and system access would be granted at any time.
    Step 8 Click Submit.

  • Remote connections in SAP support portal time out

    Hello, we are having a problem opening connections to our systems in the support portal and would appreciate any help and direction.  This is probably a problem with our SAPRouter or firewall configuration but have been unable to identify where that problem is, and we are working closely with our network folks to try to correct.  We are able to download OSS notes through SNOTE and all of the RFC's work correctly but we can't seem to keep a connection open to allow SAP support to login to our systems.  The connection appears to open for about three minutes but then gives the error "Host did not respond 1-9 times" then the connection shows cancelled after about 18min.  We have had a high priority incident open with SAP for the last couple of weeks but haven't got much response from them.  SAP has the IP addresses of our SAPRouter and VPN correct and the routestring is correct.
    SAPRouter = 216.253.195.169
    VPN = 216.253.195.170
    Routestring = /H/colo-sap-router.insummit.com/S/3299
    We are able to ping SAP(194.117.106.129) from the saprouter server successfully.  A few things I have read indicate that a simple test is that you should be able to telnet to SAP(ip above) on the configured port, 3299 but this we are not able to do and we've told this to SAP, we can telnet to port 21 but not 3299.
    SAPRouter is on a Windows 2008 server OS using VPN.  Attached is our saprouttab file.
    Also attached is a trace.out file, and dev_rout file.
    Here are the firewall ACLs:
    access-list Outside extended permit ip host 216.253.195.169 host 147.204.100.142
    access-list Outside extended permit ip host 147.204.2.5 host 216.253.195.169
    access-list Outside extended permit ip host 216.169.212.169 host 147.204.100.142
    access-list Outside extended permit ip host 194.117.106.129 any
    access-list Outside extended permit ip any host 194.117.106.129
    access-list Outside extended permit ip host 194.117.106.128 any
    access-list Outside extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
    access-list Outside extended permit ip host 194.117.106.128 host 216.253.195.169
    access-list Outside extended permit ip 194.117.106.128 255.255.255.252 host 216.253.195.169
    access-list Outside extended permit ip host 194.117.106.129 host 216.253.195.169
    access-list Outside extended permit ip host 216.169.212.169 194.117.106.128 255.255.255.252
    Here are the routes:
    IPv4 Route Table
    ===========================================================================
    Active Routes:
    Network Destination        Netmask          Gateway      Interface  Metric
              0.0.0.0          0.0.0.0        10.5.0.1      10.5.0.222    266
            10.5.0.0    255.255.255.0        On-link        10.5.0.222    266
          10.5.0.222  255.255.255.255        On-link        10.5.0.222    266
          10.5.0.255  255.255.255.255        On-link        10.5.0.222    266
            127.0.0.0        255.0.0.0        On-link        127.0.0.1    306
            127.0.0.1  255.255.255.255        On-link        127.0.0.1    306
      127.255.255.255  255.255.255.255        On-link        127.0.0.1    306
      194.117.106.128  255.255.255.252  216.253.195.170  216.253.195.169    21
      216.253.195.168  255.255.255.248        On-link  216.253.195.169    276
      216.253.195.169  255.255.255.255        On-link  216.253.195.169    276
      216.253.195.175  255.255.255.255        On-link  216.253.195.169    276
            224.0.0.0        240.0.0.0        On-link        127.0.0.1    306
            224.0.0.0        240.0.0.0        On-link        10.5.0.222    266
            224.0.0.0        240.0.0.0        On-link  216.253.195.169    276
      255.255.255.255  255.255.255.255        On-link        127.0.0.1    306
      255.255.255.255  255.255.255.255        On-link        10.5.0.222    266
      255.255.255.255  255.255.255.255        On-link  216.253.195.169    276
    ===========================================================================
    Persistent Routes:
      Network Address          Netmask  Gateway Address  Metric
      194.117.106.128  255.255.255.252  216.253.195.170      1
              0.0.0.0          0.0.0.0        10.5.0.1  Default
    And here is the VPN tunnel info:
    6  IKE Peer: 194.39.131.167
        Type    : L2L            Role    : initiator
        Rekey  : no              State  : MM_ACTIVE
    show ipsec sa peer 194.39.131.167
    peer address: 194.39.131.167
        Crypto map tag: cryptomap1, seq num: 15, local addr: 216.253.195.170
          access-list encrypt_123_to_SAP extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
          local ident (addr/mask/prot/port): (216.253.195.169/255.255.255.255/0/0)
          remote ident (addr/mask/prot/port): (194.117.106.128/255.255.255.252/0/0)
          current_peer: 194.39.131.167
          #pkts encaps: 459156, #pkts encrypt: 459156, #pkts digest: 459156
          #pkts decaps: 65825, #pkts decrypt: 65825, #pkts verify: 65825
          #pkts compressed: 0, #pkts decompressed: 0
          #pkts not compressed: 459156, #pkts comp failed: 0, #pkts decomp failed: 0
          #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
          #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
          #send errors: 0, #recv errors: 0
          local crypto endpt.: 216.253.195.170, remote crypto endpt.: 194.39.131.167
          path mtu 1500, ipsec overhead 58, media mtu 1500
          current outbound spi: 90CB4EA0
          current inbound spi : 769BBB0D
        inbound esp sas:
          spi: 0x769BBB0D (1989917453)
            transform: esp-3des esp-md5-hmac no compression
            in use settings ={L2L, Tunnel, }
            slot: 0, conn_id: 20480, crypto-map: cryptomap1
            sa timing: remaining key lifetime (kB/sec): (4373965/4063)
            IV size: 8 bytes
            replay detection support: Y
            Anti replay bitmap:
              0xFFFFFFFF 0xFFFFFFFF
        outbound esp sas:
          spi: 0x90CB4EA0 (2429243040)
            transform: esp-3des esp-md5-hmac no compression
            in use settings ={L2L, Tunnel, }
            slot: 0, conn_id: 20480, crypto-map: cryptomap1
            sa timing: remaining key lifetime (kB/sec): (4373954/4063)
            IV size: 8 bytes
            replay detection support: Y
            Anti replay bitmap:
              0x00000000 0x00000001
    Again, any help and suggestions is greatly appreciated.
    Thanks,
    Brent

    HI Brent ,
    I see your problem is critical !!!!
    But you  can have  a net viewer session with SAP .
    Its simple and effective way of analysing issue in run time .
    SAP SMP Netviewer Instructions DE - YouTube
    Netviewer
    Please check above Links
    Regards,
    Abhishek

  • QBE_form in 9.0.4 portal behaves differently

    Upon upgrading from portal 9.0.2 to 9.0.4, one of the first thibgs I noticed was the different behavior of QBE_forms. We used them in 9.0.2 because it gave end users the ability to deselect/select which columns were visible in their query. In 9.0.4, the QBE_forms ignore the checkbox next to the column name and return the entire list of columns from the query, whether you have only 1 column or 20 selected. Is there a fix for this?
    Thanks,
    Jim

    Is there also a bug in the number of characters you can type on the QBE Form? It is only allowing me to input 1 character. This worked in Portal 3.0.9.

  • ESS portal- Time Entry

    HI  Experts,
    I have to do some validation by restricting the user not to change the Time Entries more that 6 pay period in the past. I ahve a user Exit
    CATS0003 where i think i can do that by putting some validation on the Date selected by user for the changes.
    My question is if i implement this User exit ..will it be appleid to Portal Also .
    Regards
    Shekhar

    This exit is valid both for CAT2 and CATS WD ie portal
    something like this
    FORM fc_next.
      DATA: umesg LIKE mesg.
      DATA: ucheck_call_mode(1) TYPE c VALUE '1'.
      DATA: ucall_mode(1) TYPE c VALUE space.
      DATA: simulate TYPE c.
    right border reached?
      IF catsfields-dateto GE catsfields-dateright.
        MESSAGE i044.
    for specific dates code the exit
    dateright = sy-datum + 42.
    dateleft  = sy-datum - 28.
    IF fields-workdate LE dateleft.
      i_messages-msgty = 'E'.
      i_messages-msgid = 'LR'.
      i_messages-msgno = '044'.
      APPEND i_messages.
    ENDIF.
    IF fields-workdate GE dateright.
      i_messages-msgty = 'E'.
      i_messages-msgid = 'LR'.
      i_messages-msgno = '044'.
      APPEND i_messages.
    ENDIF.

  • RFC FOR PORTAL TIME

    HI
    i start to buield rfc to portal and i wont to now what is the limit of time that the function have to run ,i now that the function for the portal have to run very fast.
    i heard that if the function run to much time maybe u have to use a job to in night that select some data and help to bapi and i wont to now when i have to use it in numbers.
    4,110,168 Microseconds FOR rfc its o.k. ?
    thankes

    hi gurus
    plz i need to now if there IS recommended time to run bapi for the portal?
    <b>i reward</b>
    Regards

  • Replace one div every time different questions

    Please could anybody help me with the following.
    I have one div (-> course interactions) with one question and several answers  (radio). Now I want that the next question comes in the same div (replace het content of the div). So I don't want a list of questions on the page, but only one div with one question (and every time a different question in the same div). How do I get this? Thanxs already for the help.

    I have the elearning suit (and also DW cs 5) on trail and was hoping that the course interaction (action manager) gives a solution. I want to make a online test with one div for every question with radio buttons (so not a list of questions on one page). With selecting the radio button the div must be replaced/swaped with a different question.

  • Can a job have a start time different from its schedule?

    I have a WEEKDAY schedule defined as follows:
    begin
         dbms_scheduler.create_schedule (
              schedule_name => 'DAILY',
              repeat_interval => 'FREQ=DAILY; BYDAY=SUN,MON,TUE,WED,THU,FRI,SAT; BYHOUR=0;BYMINUTE=1;BYSECOND=0',
              comments => 'Daily'
    end;
    Is there a way to define a job that uses the WEEKDAY schedule, but has a different start time, say 17:00?

    Here is the error I am getting:
    begin
         dbms_scheduler.create_schedule (
              schedule_name => 'WEEKDAY',
              repeat_interval => 'FREQ=DAILY; BYDAY=MON,TUE,WED,THU,FRI',
              comments => 'Weekdays'
    end;
    begin
         dbms_scheduler.create_job(
              job_name => 'JPS_SHOW_INFO',
              job_type => 'EXECUTABLE',
              schedule_name => 'WEEKDAY',
              job_action => '/usr/bin/ksh',
              number_of_arguments => 2,
              enabled => FALSE,
              auto_drop => FALSE,
              comments => 'Display shell information'
    end;
    begin
         dbms_scheduler.set_attribute (
              name => 'JPS_SHOW_INFO',
              attribute => 'start_date',
              value => trunc(sysdate) + (17 / 24)
    end;
    begin
    ERROR at line 1:
    ORA-27488: unable to set START_DATE because SCHEDULE_NAME was/were already set
    ORA-06512: at "SYS.DBMS_ISCHED", line 2806
    ORA-06512: at "SYS.DBMS_SCHEDULER", line 1913
    ORA-06512: at line 2

Maybe you are looking for