Portal Time out

Hi ,
I want to set the portal time out , such that if a user is not doing any activity , the portal should log him out(like banking websites)
Please let me know the steps to do the same
I found out that it can be set from System Administration --> System Configuration --> UM Configuration --> Security Settings, but i could not find Lifetime of the SAP Logon Ticket option there
Please help

hii.
The termination of the Portal and all Web Dynpro applications as a whole is defined by the Security Session timeout.
This is an absolute timeout value, e.g. the default is about 27h, that always terminates the whole security session after the defined period of time independtly from any user interaction.
The expiration of the HTTP sessions is handled automaticaly and does not need to be cared about.
When the HTTP sessions are created they get the maximum of the application session timeout and the default HTTP session timeout. After the corresponding application session has been destroyed, the HTTP session gets a very small value to expire as soon as possible.
Go through this SAP NOTE to make the suitable changes:-
Note 842635
Also refer to NOTE 842878 for Session Management Information.
Also use this Links.
how to set SAP idle session time out
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/epSnippet-Portaluseridletimeoutforlogoff-custom+javascript
Hope this helps,
Rewards would be appreciated.
Mayank Saxena.

Similar Messages

SAP PORTAL Time-Out Settings / BO iView Reports..?

We have created BO object-specific iView requests in SAP PORTAL based on Ingo's posting....
SAP BusinessObjects Enterprise & SAP Enterprise Portal - Part 3 of 4
Currently, just posting some small CR4E and Analysis for Office (*Design Studio will be added in a few months) report objects that are based on BW queries - and response time is a few seconds.
However, long-term as our BW grows - and the volume of data/periods expands we may see some reduction in the performance of these reports, and they make take a few-minutes to return data.
The SAP Portal team already have an issue with an ECC / T-Code report (*no Business Objects involved) which runs over 100 seconds - and hits a Portal time-out....and are wondering if we would hit the same issue if a CR4E within the Portal ran longer than 100 seconds...?
I think the answer is "NO", the Portal time-out would not apply in that scenario. My assumption is that in our solution-path, the Portal's 100 second time-out rule would ONLY apply to the process of the Portal invoking the iView request - and opening the frame for the CR4E content.
Once the frame is open - and the RPT / Prompt-Screen is loaded the Portal time-out is "happy".
After that iView -> BO frame is established....so, even if the CR4E & BW Query took more than 100 Seconds to return/display the data - the SAP Portal would not time-out - as all of that activity is actually taking place at the BOE Platform layer within the frame (and using the time-out settings at the BOE level).
Can anyone confirm that my assumptions are correct, or explain where the assumption is wrong..?
Thanks in advance...!

In our scenario, the SAP PORTAL has a 100 second time-out, but the Business Objects platform where the CR4E content is hosted has a 600 second time-out for "View on Demand" reporting.
When the SAP PORTAL opens the iView connection, it is opening the CR4E content in a frame on the Portal. Prompts are entered - and the RPT execution begins on the BOE platform.
There is a "spinning-wheel" displayed from the BOE platform, and if run in BO LaunchPad it could run for up to 600 seconds before a time-out occured.
When it is presented in SAP PORTAL via iView connection - does that "spinning-wheel" from BOE Platform provide enough of a "heartbeat" to let the PORTAL know not to drop the connection at 100 seconds....?
My reasoning is that SAP PORTAL should be opening the BOE content with the same rules that apply when the report is opening in the BO LaunchPad.
We are going to create a "SLOW" report in CR4E (*Lots of charts & sub-reports) to test/compare LaunchPad and Portal display of the same report.

Portal time out with large jdbc query in JSP bean

Hi,
My JSP portlet always times out while waiting to complete two large JDBC queries. The error shown in my jserv.log file is:
[28/03/2002 12:41:51:221 GMT+08:00] page/Fetching timed out for an Unknown Reason. Killing fetcher name=content-fetcher2 label=174 url=http://mephistopheles.au.oracle.com/servlet/agcharts time=120633
[28/03/2002 12:43:10:595 GMT+08:00] page/UncaughtException in thread name=content-fetcher2, starting a new fetcher after exception
java.lang.ThreadDeath
Is there some particular settings I can modify to prevent the content fetcher from timing out? Cheers

Thanks. The charts portlet now can be delayed up to the required ~10mins before returning data from the large query. This works in conjunction with changes in the directives/parameters for Jserv and httpd(Note:180548.1)
Shankar,
Normally, you can increase the time out in the portlet tag of the provider.xml file. The timeout is in seconds, you should also increase the provider timeout. This is done in the provider registration screen.
<timeout>60</timeout>
<timeoutMessage>My Portlet Timed Out</timeoutMessage>
Please note that if you set the timeout too high and your portlet is really not coming up, you page will wait the 60, 90, 120, etc seconds for the portlet to timeout, so be careful will portlet and provider timeouts.
Sue

Remote connections in SAP support portal time out

Hello, we are having a problem opening connections to our systems in the support portal and would appreciate any help and direction. This is probably a problem with our SAPRouter or firewall configuration but have been unable to identify where that problem is, and we are working closely with our network folks to try to correct. We are able to download OSS notes through SNOTE and all of the RFC's work correctly but we can't seem to keep a connection open to allow SAP support to login to our systems. The connection appears to open for about three minutes but then gives the error "Host did not respond 1-9 times" then the connection shows cancelled after about 18min. We have had a high priority incident open with SAP for the last couple of weeks but haven't got much response from them. SAP has the IP addresses of our SAPRouter and VPN correct and the routestring is correct.
SAPRouter = 216.253.195.169
VPN = 216.253.195.170
Routestring = /H/colo-sap-router.insummit.com/S/3299
We are able to ping SAP(194.117.106.129) from the saprouter server successfully. A few things I have read indicate that a simple test is that you should be able to telnet to SAP(ip above) on the configured port, 3299 but this we are not able to do and we've told this to SAP, we can telnet to port 21 but not 3299.
SAPRouter is on a Windows 2008 server OS using VPN. Attached is our saprouttab file.
Also attached is a trace.out file, and dev_rout file.
Here are the firewall ACLs:
access-list Outside extended permit ip host 216.253.195.169 host 147.204.100.142
access-list Outside extended permit ip host 147.204.2.5 host 216.253.195.169
access-list Outside extended permit ip host 216.169.212.169 host 147.204.100.142
access-list Outside extended permit ip host 194.117.106.129 any
access-list Outside extended permit ip any host 194.117.106.129
access-list Outside extended permit ip host 194.117.106.128 any
access-list Outside extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
access-list Outside extended permit ip host 194.117.106.128 host 216.253.195.169
access-list Outside extended permit ip 194.117.106.128 255.255.255.252 host 216.253.195.169
access-list Outside extended permit ip host 194.117.106.129 host 216.253.195.169
access-list Outside extended permit ip host 216.169.212.169 194.117.106.128 255.255.255.252
Here are the routes:
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway      Interface Metric
          0.0.0.0          0.0.0.0        10.5.0.1      10.5.0.222    266
        10.5.0.0    255.255.255.0        On-link        10.5.0.222    266
      10.5.0.222 255.255.255.255        On-link        10.5.0.222    266
      10.5.0.255 255.255.255.255        On-link        10.5.0.222    266
        127.0.0.0        255.0.0.0        On-link        127.0.0.1    306
        127.0.0.1 255.255.255.255        On-link        127.0.0.1    306
127.255.255.255 255.255.255.255        On-link        127.0.0.1    306
194.117.106.128 255.255.255.252 216.253.195.170 216.253.195.169    21
216.253.195.168 255.255.255.248        On-link 216.253.195.169    276
216.253.195.169 255.255.255.255        On-link 216.253.195.169    276
216.253.195.175 255.255.255.255        On-link 216.253.195.169    276
        224.0.0.0        240.0.0.0        On-link        127.0.0.1    306
        224.0.0.0        240.0.0.0        On-link        10.5.0.222    266
        224.0.0.0        240.0.0.0        On-link 216.253.195.169    276
255.255.255.255 255.255.255.255        On-link        127.0.0.1    306
255.255.255.255 255.255.255.255        On-link        10.5.0.222    266
255.255.255.255 255.255.255.255        On-link 216.253.195.169    276
===========================================================================
Persistent Routes:
Network Address          Netmask Gateway Address Metric
194.117.106.128 255.255.255.252 216.253.195.170      1
          0.0.0.0          0.0.0.0        10.5.0.1 Default
And here is the VPN tunnel info:
6 IKE Peer: 194.39.131.167
    Type    : L2L            Role    : initiator
    Rekey : no              State : MM_ACTIVE
show ipsec sa peer 194.39.131.167
peer address: 194.39.131.167
    Crypto map tag: cryptomap1, seq num: 15, local addr: 216.253.195.170
      access-list encrypt_123_to_SAP extended permit ip host 216.253.195.169 194.117.106.128 255.255.255.252
      local ident (addr/mask/prot/port): (216.253.195.169/255.255.255.255/0/0)
      remote ident (addr/mask/prot/port): (194.117.106.128/255.255.255.252/0/0)
      current_peer: 194.39.131.167
      #pkts encaps: 459156, #pkts encrypt: 459156, #pkts digest: 459156
      #pkts decaps: 65825, #pkts decrypt: 65825, #pkts verify: 65825
      #pkts compressed: 0, #pkts decompressed: 0
      #pkts not compressed: 459156, #pkts comp failed: 0, #pkts decomp failed: 0
      #pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
      #PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
      #send errors: 0, #recv errors: 0
      local crypto endpt.: 216.253.195.170, remote crypto endpt.: 194.39.131.167
      path mtu 1500, ipsec overhead 58, media mtu 1500
      current outbound spi: 90CB4EA0
      current inbound spi : 769BBB0D
    inbound esp sas:
      spi: 0x769BBB0D (1989917453)
        transform: esp-3des esp-md5-hmac no compression
        in use settings ={L2L, Tunnel, }
        slot: 0, conn_id: 20480, crypto-map: cryptomap1
        sa timing: remaining key lifetime (kB/sec): (4373965/4063)
        IV size: 8 bytes
        replay detection support: Y
        Anti replay bitmap:
          0xFFFFFFFF 0xFFFFFFFF
    outbound esp sas:
      spi: 0x90CB4EA0 (2429243040)
        transform: esp-3des esp-md5-hmac no compression
        in use settings ={L2L, Tunnel, }
        slot: 0, conn_id: 20480, crypto-map: cryptomap1
        sa timing: remaining key lifetime (kB/sec): (4373954/4063)
        IV size: 8 bytes
        replay detection support: Y
        Anti replay bitmap:
          0x00000000 0x00000001
Again, any help and suggestions is greatly appreciated.
Thanks,
Brent

HI Brent ,
I see your problem is critical !!!!
But you can have a net viewer session with SAP .
Its simple and effective way of analysing issue in run time .
SAP SMP Netviewer Instructions DE - YouTube
Netviewer
Please check above Links
Regards,
Abhishek

Webdynpro application time out in portal

Hi all,
I am trying to perform a batch of process in my webdynpro application.
I selected 100 records in my view which are displayed in a table ,for updateding..
Upon selction of these 100 recoreds and on click of submit it is giving portal
time out after a few seconds..
where the problem can be??Is it in front view(webdynpro code means giving the selected records as input to the function module) or at the backend(mesns at BAPI's)
Can anyone please tell me where problem might be ??
Regards
Padma N

Hi all,
I am trying to perform a batch of process in my webdynpro application.
I selected 100 records in my view which are displayed in a table ,for updateding..
Upon selction of these 100 recoreds and on click of submit it is giving portal
time out after a few seconds..
where the problem can be??Is it in front view(webdynpro code means giving the selected records as input to the function module) or at the backend(mesns at BAPI's)
Can anyone please tell me where problem might be ??
Regards
Padma N

Dump time out message in the portal

Hi experts ,
In my portal , the web dynpro component "FPM_OIF_COMPONENT" is being used.
when user logs in and then sit idle for 30 min. then after he press "save" button,
he gets the dump message like
"the URL http://...WebDynpro /sap/hap_main_document was not called due to an error
User session (HTTP/SMTP /..) closed after time out."
"the termination type was "ERROR_MESAGE_STATE"
but the Service "WebDynpro /sap/hap_main_document" remains active.
Timeout is set for 60 mins but it gets timeout after 30 mins.
I have to show a normal alert message instead of the dump mesage. how can i achieve that..
please help.

Hi Tobias ,
yes , !! time out for web dynpro is also set to 60 min .
But as per the requirment , i have to show a page / pop up msg displaying "portal time out " instead of that dump mesage.
in the meanwhile i have come across the t-code SICF , on executing it for services. then in the path
"sap -> bc -> webdynpro -> namspace SAP - > HAP_MAIN_DUCUMENT " i have found the setting to redirecting the user to a URL page when error occurs.for every type of error there is a option of "redirect to a URL".
I have not tested it.But i think it might work.i am still working on it.
your valuable feedback is welcome..
thanks
Nishchay

Planning Sequence/Function times out

Hello,
I have the following issue. I have a planning layout and many planning sequences/functions attached to the push buttons on the layout. The problem is that when I am trying to execute any of the planning sequences attached to the buttons (click the button), the "wheel keeps spinning" and eventually the application times out without computing anything. it works fine in Development and QA systems, but not in P. the only difference between the 3 environments is the Support Stack level. in P we are still on SPS 11 and D and QA is SPS 13.
I suppose there can be multiple reasons for why this is happening, but what should I be looking for first? Why does it time out? It does not seem to matter how many records PF is processing, because it times out with 4 records and 40K records. Any ideas or pointers to look at?
Thanks

Hi AG,
please try if your planning sequences run in the back-end report RSPLS_PLSEQ_EXECUTE. If you have variables you need to define a variant to start it in the back-end. You should measures the time here ...
And what kind of time out are you getting? Is it a portal time out? In this case you should consider that in you production system much more data may be read and that executing the planning sequences may take longer -> time out ...
Hope this helps ...
Matthias Nutt
SAP Consulting Switzerland

Session Time Out capturing for legacy application running in portal

Hi Forums,
I am using portal URL iView to connect to legacy application. How to capture the session time of of that legacy application and show it in the portal. In portal I have already handled session time out which shows a javascript popup message. I want to call the same piece of code once session time out happens in the legacy application which is been accessed by portal through URL iview.
Many Thanks and Best Regards
Sudhir

Hi Sudhir,
The handling of the session timeout should be done by the application itself not the portal. From the portal you have no way of working out what the application is doing. My suggestion to you is that you need to modify the application to handle the scenario you describe not the portal.
BRgds,
Simon

Time out error in BI portal.

Hello All,
When I am executing a report in BI portal, it is throwing time out error. Please find the below error.
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu Apr 8 03:08:22 2010
Module: icxxthr_mt.c
Line: 2698
Server: sapb6pv-n2__00
Error Tag: {-}
Detail: Connection to partner timed out after 600s
It is also throwing a Short dump in BI system.Please find the below message in ST22.
Runtime Errors         TIME_OUT
Date and Time          04/08/2010 03:04:54
Short text
     Time limit exceeded.
What happened?
     The program "CL_RSDR_AT_QUERY==============CP" has exceeded the maximum
      permitted runtime without
     interruption and has therefore been terminated.
This issue is of High priority, can some body guide me what could be the reason

There is only one reason for this...you have selected a huge volume of data.
please try to run the report for fewer data sets. May be restrict your varaible. I\m sure yoiu wont be timed out.

SAP SNC Portal DCM screen performance is very slow and times out

Friends,
SAP SNC Portal DCM screen performance is very slow and times out when user trying to pull data using customer location
What are the cleanup activites we can do to improve the overall SNC performance ?
We did open OSS message but so far no reply from SAP , Is there any one faced performance issue ?
User/vendor is complaining about slowness , query is standard SAP and its taking more time .(table - /LIME/NTREE) , It looks like number of data are huge causing this problem related to LIME/NTREE table. What are the options to improve the performance ?
Thanks in Advance
Hanuman Choudhary

hi Team,
Pls . note the advise from SAP below, IS there any have experiance of archiveing /LIME records ?
Please advise how to start & what the steps in archiving ?
Thanks in advance
I had a look at the DCM query performance in PH1 system and figured out
that most of the time is spent at the LIME layer of database. The
following LIME tables are having far too many entries and is causing
the bottleneck during the query execution.
/LIME/NLOG_QUAN - 38,165,467
/LIME/PN_ITEM - 19,116,518
/LIME/PN_ITEM_TB - 19,154,124
These tables are storing the historical information about LIME(stock)
updates. Since these table grow with each change/update of stock
information, it will slow down the performance of the system over a
period of time. And to avoid the slow responses, the tables should
ideally be archived on a periodic basis to keep the data volume as
minimal as possible. You may have to discuss with the Business to
determine the number of days of LIME record you would want to retain
in the system. I would strongly recommend you to consider the LIME
archival retaining the minimum days (<=60 days) of historical
information. You can find more information about the Lime Archival
in the Sap Help link:
http://help.sap.com/saphelp_scm2007/helpdata/en/44/2a83121dde23d1e10000000a1553f7/frameset.htm.
Kindly get in touch with your BASIS consultant for the LIME archival.
The application performance should definitely improve after the LIME
archival. Please do not hesitate to get in touch with me in case you
require any further clarification in this regards.
Best Regards

System time out when saving report from portal

Hi,
We have a problem where the report output either gets time out or gives an output after 30 minutes if we try to save a report from portal in the form of excel.( report is run on the web)
Generally the query output has not more then 32k records.
Is it the number of records in the portal output which is the cause of the issue??
This is not the issue with the reports with leess number of records.
Can we do something to improve the performance here??
Thanks
Ajeet

Try creating aggrates on the cube. this may change the performance.
also you can change the query execution time.
but better check for some performance tuning by using aggrates.
check below suggestions also:
query execution
regard: gaurave

Crystal report Viewer Session times out for more data in Portal

Hi All,
     I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
       pageEncoding="ISO-8859-1" session="false"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
       import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
       <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
              <%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
       <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
       String reportPath,Sharedpath;
       ReportClientDocument reportClientDocument;
            ParameterFieldController parameterFieldController;
            try{
                reportPath = "reportlocation";
             Sharedpath = "Target Location";
                reportClientDocument = new ReportClientDocument();
                reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                     reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                     reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
                     System.out.println("Connecting...");
                   parameterFieldController = reportClientDocument.getDataDefController()
               .getParameterFieldController();
                parameterFieldController.setCurrentValues("", "param 1",
                     new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
              new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
       reportClientDocument.close();
       System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
              System.out.println("Finished...");
       } catch (ReportSDKException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
%>

Hi All,
     I am using below java SDK code to render a report in crystal report viewer. When i refresh report with more data(more parameter value) the server session times out in portal. Is there any way to fix this issue. The report loads data and then displays in Crystal report viewer, When more data is there the server times out as the server time is set to 60 sec. Is there any way to open the crystal report viewer as and when the report loads data to avoid server time out isse.
Please help . Please let me know if I am missing something.. Thanks in Advance!!!
CODE;
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
       pageEncoding="ISO-8859-1" session="false"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.OpenReportOptions"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportClientDocument"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.ParameterFieldController"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKException"%>
<%@page
       import="com.crystaldecisions.report.web.viewer.CrystalReportViewer"%>
       <%@page import="com.crystaldecisions.report.web.viewer.*"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase"%>
<%@page
       import="com.crystaldecisions.sdk.occa.report.reportsource.IReportSource"%>
<%@page import="java.io.Writer"%>
<%@page import="java.io.IOException "%>
<%@ page import="com.crystaldecisions.report.web.viewer.ReportExportControl" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ExportOptions" %>
<%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat" %>
<%@page
       import="com.crystaldecisions.sdk.occa.report.application.DatabaseController"%>
              <%@page
       import="com.crystaldecisions.sdk.occa.report.application.ReportSaveAsOptions"%>
       <% response.setHeader("pragma","no-cache");//HTTP 1.1
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.addDateHeader("Expires", -1);
response.setDateHeader("max-age", 0);
//response.setIntHeader ("Expires", -1);
//prevents caching at the proxy server
response.addHeader("cache-Control", "private"); %>
<%
       String reportPath,Sharedpath;
       ReportClientDocument reportClientDocument;
            ParameterFieldController parameterFieldController;
            try{
                reportPath = "reportlocation";
             Sharedpath = "Target Location";
                reportClientDocument = new ReportClientDocument();
                reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
                     reportClientDocument.open(reportPath, OpenReportOptions._openAsReadOnly);
                     reportClientDocument.getDatabaseController().logon("Dbname", "dbpassword");
                     System.out.println("Connecting...");
                   parameterFieldController = reportClientDocument.getDataDefController()
               .getParameterFieldController();
                parameterFieldController.setCurrentValues("", "param 1",
                     new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,29});
parameterFieldController.setCurrentValues("", "Param 2",
              new Object[] {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23});
reportClientDocument.saveAs("Target Report Name","Target Location", ReportSaveAsOptions._overwriteExisting);
       reportClientDocument.close();
       System.out.println("Finished...");
CrystalReportViewer viewer = new CrystalReportViewer();
viewer.setOwnPage(true);
viewer.setPrintMode(CrPrintMode.ACTIVEX);
viewer.setReportSource(Sharedpath);
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), null);
              System.out.println("Finished...");
       } catch (ReportSDKException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
%>

BSP Session times out in Portal iView

HI,
I have a stateful BSP Application with two pages. First BSP Page navigates via a POST to third party site from which, the request returns back to the original BSP to the second page. I pass the url of the application, along with the session information, with the name of the second page to the site, using which the site posts the request back to the BSP. I have increased the session time out in ICF to 10 minutes. This works fine when executed as a standalone application.
I use the same BSP, as an iView in the Portal, and i get the Session Timed out error. I have selected the checkbox for the property "Supports Portal integration" in the application.
If i do not pass the session information, then the user is prompted to provide the credentials for the SAP system when the request returns from the third party site in the Portal.
Please provide your inputs/help on this.
Thanks,
Regards,
Siddhartha

Can you share how did u solve?
Raja T

How to get Portal Session Time out values of CRM system

Hi,
I had a requirements to pass the Portal session Time out value to the External Configurator. How can I get that value. Is there any Function Module to get this value.
If you go to SMICM and select services, we see HTTP details. I need to get the Time out value what its showing there. How can I get that value. Is there any FM to get that value or Is there any existing code.
Please let me know if you need any further information.
Thanks.

Hi
The session time out value for CRM WEBUI is controled by parameter RDISP/PLUGIN_AUTO_LOGOUT.
Its value is got by BSP.
Please check in SE80 BSP application CRMCMP_IC_FRAME view hideenview.htm.
If you want to know the session time out value for portal, I am afraid that you need to raise questions in EP's forum.
Best regards,
Maggie

How to get Portal Session Time out values.

Hi,
I had a requirements to pass the Portal session Time out value to the External Configurator. How can I get that value. Is there any Function Module to get this value.

Hi
The session time out value for CRM WEBUI is controled by parameter RDISP/PLUGIN_AUTO_LOGOUT.
Its value is got by BSP.
Please check in SE80 BSP application CRMCMP_IC_FRAME view hideenview.htm.
If you want to know the session time out value for portal, I am afraid that you need to raise questions in EP's forum.
Best regards,
Maggie

Portal Time out

Similar Messages

Maybe you are looking for