POS Form with developer 6i
Dear Messers.,
I have a form done with developer 6i, but I want to send a code for open a cash drawer for a POS system.
Thanx
Mohamed El-Halwagy
Craig's suggestion is very logical.
You first have to check your cash register's manual's for the "API" command to open the drawer. If you're able to open your drawer from your OS, use the HOST built-in to execute the same command from Oracle Forms.
Tony
Similar Messages
-
Safari scrolls to bottom when filling out form with developer tools in use
I love the Safari developer tools and use them all the time, but one behaviour is driving me up the wall. Whenever I have the developer tools open (whether for the error console, the web inspector, etc.) and I try to enter data in a form on the page, for every character I type or control I click, the page scrolls to the bottom. I end up having to close developer tools (not great if what I'm typing is to see the result in the tools) or typing blindly. Scrolling back to the form doesn't work, because it scrolls to the bottom again for the next character typed or control clicked.
I'm using Safari 4.0.5 on Snow Leopard, but this behaviour has been consistent for some time in earlier versions of Safari and on Leopard. Any tips for changing this would be greatly appreciated.HI and Welome to Apple Discussions...
Make sure Safari is opening in 32-bit mode, not 64. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
If you still have problems, go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If you can use Safari / Dev tools, then that .plist file needs to be moved to the Trash.
Carolyn -
Oracle 10.2.0.3 with Developer 2000 (Form/Report 6i)
Hi Experts
we are using Oracle 9i database and Developer 2000(6i) Last few years. Now I want to replace 9i database with Oracle 10.2.0.3 , in this scenario can Oracle database 10.2 will work with 6i form/report.
what I did. I installed Oracle 10g (10.2) and Developer 2000(6i) on Windows XP and restored data backup. on this machine software working. Now I want to ask how can I run this software on Clients (Windows XP).
My past practice was I used to installed oracle 9i database client with Developer 2000.
now in current scenario what Should I do. because there is no any client installation available on Oracle database 10.2.
how to manage connection client with server (windows Xp).now in current scenario what Should I do. because there is no any client installation available on Oracle database 10.2.Well First ORACLE 10g Database will work with developer 2000 , But to get oracle client software you have to Raise SR On http://support.oracle.com
Otherwise
You need to upgrade to 11.2.0.2 as i think its not supported with developer 2000 , So you have to upgrade the whole Environment Forms/reports 10g and Database 11g -
Problem in integration of custom Forms with Oracle POS 13.2
Hi All,
I am working on POS 13.2 and it is currently configured with Ingenico signature capture device i6580. This device supports 5 services Pinpad service, signature capture service, line display service, msr service and FORMService.
Form service is used to display all the custom forms (welcome form, thank you form etc) on the device. The same formservice is not supported by the device isc250 which need to be integrated.
Could you please help me how can i display welcome or thankyou form on the device?
Thanks!
ArunPeter,
unfortunately you can't call into a running Forms application. This will be addressed in a future release of Forms (don't ask me for the version of it because calling into Forms with JavaScript requires us to handle asynchronous events first). For now all you can do is to write an separate Applet that creates s ocket connection to a Java Bean running in Forms on teh Web. This is a bit of a hack and may have a security impact. I am forwarding this thread to some of my collegues who knows this better than I do.
Frank -
How to open new form with set value
I have two forms CLIENT and ORDERS who are connected by "client_id" in a one to many relationship [one client can have many orders]. What code to I put in the button so that that when I click on it from the CLIENT table, it goes to the ORDERS form with just the orders that match that "client_id"? The application is in oracle 9i developer using swing.
Here's what I have so far, code to open the form without the binding
//Open Order Form
FormIcdClientApplicationView frameTarget = new FormOrderApplicationView(getPanelBinding());
frameTarget.setVisible(true);
// Close this window
this.setVisible(false);Hello,
This is the Forms forum. I am sure you will have more chance to get answer in the JDeveloper forum.
FRancois -
How do I use infopath 2013 with visual studio 2013 to modify forms with code?
Dear all,
I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
TimothyHi,
According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
More information about develop InfoPath form with Visual Studio:
http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
http://msdn.microsoft.com/en-us/library/office/aa942693.aspx
For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
Best regards -
I have a form in LiveCycle ES2 that has an ODBC connection to an Access 2007 database. The form works great and all the data populates the form just fine, but next I need a way to save the generated form with the data so it can be sent and signed by people who won't (and can't) have a connection to the database. I am developing on a Windows 7, 64 bit machine and have Adobe Acrobat X Pro, and Adobe Reader X.
Any help or suggestions would be appreciated.
ThanksThanks for the quick response. I tried saving the form as Reader Extended in Acrobat Pro, but if I close the form I saved as extended, it still prompts for the data connection. Is there some setting in Adobe LiveCycle in the properties that maybe needs to be set? I have it set as a Dynamic XML Form. In form properties, there is a tab called data binding, should I have "Allow binding to data not defined by the default data connection" checked? Wasn't sure what "Add data nodes inside the filtered data hierarchy" would do either.
-
Error in generating form with 6i
I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanksHere is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena -
Filling PDF forms with in-house software - pdf no longer works in Reader
I have created a PDF form in Acrobat 8.1.0 Pro and enabled the "Filling of form fields" feature.
1)
I can open this form in Adobe Reader, fill fields, save, load / repeat process as many times as I want with no problems.
What we would like to be able to do is "pre-fill" some of the form fields using an in-house application with some data and save. At a later time, users would need to add additional information.
If I open one of these pre-filled forms with Adobe Reader, it immediately gives an error message and closes the file:
"This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
Other programs such as "Foxit" and "AmiUni PDFSuite" don't seem to care that the file was pre-filled.
Is this because Adobe Reader actually checks some sort of CRC or signature which was created at the time the initial PDF form was created by Adobe Pro - and if the signature is no longer valid Adobe Reader won't go any further?
2)
What would be the options to get around this problem? Is there a way to accomplish this with Adobe Pro? We need to be able to pre-fill some fields in the form from our application, then have the user complete filling the form manually.
Thanks!Enabling usage rights in reader grants specific rights for a given document - form fill in, saving, signing, etc. Reader checks if something else has been done to the document beyond the scope of the rights granted and apparently the program you are using to add the form data is triggering this test for some reason. There is a digital signature which isused to check this, plus an analysis of what has changed in incremental save sections.
What you are trying to do should work in principal. If the developer of the application is available, have them look at what else is being changed besides the addition of form data. They should be able to fix the problem.
If the pre-fill data is the same for each user, you can definitely run the pre-fill and then enable usage in reader. -
Form with view having instead-of-trigger gives FRM-40501 and ORA-02014
I created a data-entry from with a 'view' as datas-source block. This view gives crosstab query results with a data from a single base-table but it is complex and uses decode and aggregate funciton 'max' just to create group by in a crosstab query. I have created a instead of trigger on this view to update or insert a record in base table. A test to update base table works fine at SQl prompt. A test to insert at SQL shows '1 row created' but in fact when I query the database, it does not show newly inserted row. Also, when I compile and run this form, I get FRM-40501 and ORA-02014. Help!!!
I know that DML operations on a view with DECODE, aggregate functions or group by can not be performed but I thought the "instead of" trigger on the view to update the base table should eleminate this restriction and hence pusued further but now stuck!
BTW: I can post details of base table, view, and instead of trigger, if you want to see them to further decipher the problem. Just let me know. Thanks!
VERSIONS: Forms in developer suite v10.1.2.0.2 on Windows XP 64 bit desktop - ; Backend database: 9.2.0.8 on Windows 2003 EE server
Edited by: user8647268 on Aug 19, 2009 1:19 PM
Edited by: user8647268 on Aug 19, 2009 1:25 PMI just forgot to ask you one question: In my experience with forms, I have captured before_value and after_value and implemented logic based on results many times. This form I am working on is kinda first multi-record form where I have a tabular page with date and about 7 other columns forming a grid of cells, which users wanted. Each line is a record from a view. I tried relying on forms to do DML on underlying table and since the underlying table is a paritioned table, I ran into FRM-40509 and ORA-00936, where returning ROWID becomes problematic. I found a note 167550.1 which says to set Key mode to 'Updateable' or 'Non-Updateable' but not 'Unique' or 'Automatic' as a solution #1. Solution#1 failed i.e. the errors persisted. The note also says in that case, implement Solution #2, which is to write explicit trigger to do each of the DML on view. Here I run into kinda problem: In a tabular form with say 31 records each row having 7 cells which is like capturing 217 before values..that is too many. Addressing them with ':old.xxx' or ':new.xxx' which works in instead of trigger, does not work in trigger inside forms. Without checking these before and after values, it inserts rows with nulls for empty cells where we wnated it to skip and do nothing. So iam looking for a way to capture before value using some kinda standard form mechanism..Do you have any suggestions! (Sorry for long explanation but that is the only way to do it..)
-
Smart form with 2 different pages
Hi Experts
I have a requirement, I need to develop a smart form with 2 different pages, and each page has different data and presentation of the data also is different.
In the first page I need to display the contract data with the line items and amounts and in the second page I need to display the partner details with their contact details. From second page onwards it may go further based on the partners exists for that contract.
Plesae advice me best possible way to achive this.
Thanks
PraveenHi Praveen,
Create two Pages:
First Page:
In general Attributes section- Keep page2 as next page
Create Main window and under that
Keep the text elements for contract data of line item and amounts as required
Second Page:
In general Attributes section- Keep page2 as next page
create main window and under that
get all the partner details of line item into an internal table(using program lines node).
Now use 'Tables' node which behaves as loop for this internal table (so that it continues further if it contains date more than 1 page)
And display the values in smartform using Text node
Regards,
Swarna Munukoti. -
PDF form with XML data connection comes up blank at run time
Hello All,
I am a newbie to ADOBE Livecycle 9, but am very proficient in C#. I would like to request for your guidance on the following issue.
We have a desktop application in C#, WPF, Sqlserver. The requirement is to launch a Livecycle form from the application for the user to read/edit/save data
I have done this much so far -
Downloaded trial version of Livecycle 9
Developed a interactive PDf form
Created an XML based data connection. Generated fields on the form using the fields from this connection.
Set the .XML file as preview source for the form
the controls on the form are boumd to the xml data source
In design mode, the form works fine, it displays my data correctly
I have created a WPF form with a button. On click of this button, I call the Process.Start(pdf-file-path). My pdf is launched properly
I have added a combo box to my WPF form. I select a parameter from this, then call a stored procedure which returns me a datatable depending on parameter passed
Using the returned datatable, I have used the datatable.writexml and datatable.writexmlschema to create my XML and XSD files. as mentioned above, this xsd is used to create the data connection for the PDF and the XML for the preview source
This is what I want to do -
Launch the PDF from my WPF form, pre-populated with the newly created XML data from my WPF form.
So basically, as the user changes the selection criteria from the combo box, the XML file data will change and the PDF file will be launched each time with new data.
The XSD format will always be constant
Problem -
My XML and XSD get created properly, my PDF launches, but it is empty
If I change my selection criteria and run the WPF application, and then open the PDF in design mode, it asks me whether it should refresh the XML source. This means that the PDF form is connecting correctly to the XML source
So why then, does the form come up empty at run time?
What link am I missing?
I have found some sites that help using Web applications, but nothing for desktop applications. It would be fantastic if you could point me to some help for developing Livecycle forms with C# / SQLServer
Your help in this case will be highly appreciated.
Thanks and RegardsOops, something happended with the above post. I will try again... I have tried your suggestion but I still get the same garbled XML (with data repeated and some values "cut in half".<br /><br />Here is what I get after decode-service and extract-to-XML-service. This is just the first barcode, the others are similar, sorry for the poor formatting, but I get a CDATA tage infront of the "istensen" value.<br /> <br />CDATA:istensen</fld_ForMellemEfterNavn<br />><fld_VejNRpostByEnLinie<br />>Superroad 99, 1330 Supertown</fld_VejNRpostByEnLinie<br />><fld_PrivatTelefonnummer<br />>20724283</fld_PrivatTelefonnummer<br />></sub_Person<br />></sub_PktA<br />><fld_BlanketNr<br />>kb0371ff</fld_BlanketNr<br />><fld_BarcodeCount<br />/></form1<br />>/sub_Adresse<br />><sub_Person<br />><fld_ForMellemEfterNavn>Kim Christensen</fld_ForMellemEfterNavn<br />><fld_VejNRpostByEnLinie<br />> Superroad 99, 1330 Supertown </fld_VejNRpostByEnLinie<br />><fld_PrivatTelefonnummer<br />>20724283</fld_PrivatTelefonnummer<br />></sub_Person<br />></sub_PktA<br />><fld_BlanketNr<br />>kb0371ff</fld_BlanketNr<br />><fld_BarcodeCount<br />/></form1<br /><br />Obviously this is not a legal xml-string, so I can do nothing about it.<br /><br />I have tried using a custom .NET component (ClearImage) for reading the same form (with the barcode) I get the correct data out from the barcodes. So I guess something is wrong with the decode-service in Barcoded Forms ES when I use compressed XML. But I can conclude since the ClearImage component can read the barcodes that they are compressed correctly.<br /><br />Can you help me with getting further with this problem?<br /><br />Sincerely<br />Kim
-
Hi,
I have developed all my forms of type 'Form with report' which after entering values, displays the report page that shows the details entered.
In the form page definition I have a select list for customer id which diplays 'customer name' as return value. So after the form values are entered it redirects to the report page which displays the details such as customer id etc. How do I make this page to display the customer name instead of customer id. From user's perspective it would make more sense if he can see the customer name for editing/changes.
Also I wanted to know which kind of report would be the most appropriate if the report is based on a PL/SQL block. Would it be as interactive ?.
Appreciate all suggestions posted.Hi Zahid,
Yes, That is exactly what I wanted. So now I have my other table (resources ) for getting the resource_name . I do not see any quotes in your query which makes me wonder how your query under – ‘Region source’ of the Region definition looks like. Could you paste you code exactly as seen there. Besides I am not sure if we can join tables in there. I was getting –Unable to parse query error as well as Invalid character. I am not entirely sure of the syntax of the query definition in the report page as it is automatically generated . Any ideas? . I am pasting my query here for you to look at.
Appreciate your help.
select "RR.RESOURCE_ROLE_ID",
"RR.RESOURCE_ID";
"RE.RESOURCE_NAME",
"RR.ROLE_ID",
"RR.PROJECT_ID",
"RR.CREDITS_PER_HOUR",
"RR.ACTIVE_DATE_START",
"RR.ACTIVE_DATE_END",
"RR.LAST_UPDATED_BY",
"RR.LAST_UPDATE_DATE",
"RR.CREATED_BY",
"RR.CREATION_DATE"
from "#OWNER#"."RESOURCE_ROLES" "RR",
"#OWNER#"."RESOURCES" "RE"
where "RR.RESOURCE_ID" "=" "RE.RESOURCE_ID";
Thanks,
A -
Troubles creating a form with Acrobat
I have created a form with Acrobat 9 Pro. However, when it is brought up with Acrobat Reader, the following message appears:
Sending data files by email: Please note, this form contains an email submit button. Clicking this button will email a data file... However, the form itself will not be sent. Remember you cannot save a complete file of this form with Adobe Reader 9.
When the submit button is clicked, the following message is posted on a popup window.
Operation not permitted.
Here's the link to a form I am trying to get to work. It works fine if I use the Pro version, but the Reader version doesn't want to allow the form to be sent. http://www.drugfreedekalbcounty.info/pdf/interventionscholarshipform.pdf
Any help would be appreciated. Thanks.It may have been improved with AA9, but at least up through AA8, Acrobat required the use of MAPI on the machine to deal with e-mail. If that has changed, then the other recommendation to use extended rights might meet your need. There is a 500 use limitation for the extended rights (more requires negotiation with Adobe). This may be a limitation that changed with AA9 Pro Extended.
The rights are not needed if the data file is sent and not the whole PDF. There is no need for the whole PDF since the data file can be opened in the original form document - giving the same result. Your observation that it works in AA9 for e-mail is making the assumption that everyone uses AA9. That is a dangerous assumption if you are developing a general use form. You should assume folks have back to AA7, or even AA5 (like I have on this machine). There are still a few that check in here on occasions with AA4. I have not seen an AA3 question for several years. Thus backward compatibility may be an issue, depending on your client base.
The cleanest way to work with forms is to submit to a web script. Then there is no question about the end result. The use of web scripts is even recommended for online html forms for much the same reasons. I was giving a heads up so that you have considered possible users that do not have the newest and best, assuming that the latter resolves the e-mail issue. -
How to use Adobe Interactive forms with ISR frame work in Webdynpro forJava
Hi,
Anybody worked on Adobe Interactive forms with ISR frame work in Webdynpro for Java in ESS/MSS development.
We have already searched in ISR_Cookbook_2004, however we didn't anything related webdynpro for java in that.
Any information regarding this will be of great help.
Regards
Satish KumarThere are a number of issues here. A form that you created with LiveCycle Designer (XFA) cannot be used with FormsCentral. An Acroform, the kind you can create with Acrobat, can be used with FormsCentral, with certain limitations, one of which is skip logic. A dynamic XFA form allows for this type of thing, but as mentioned, they don't work with FormsCentral. You can set up an Acroform to show/hide or activate/inactivate fields based on selections or entries made in other fields, but you'd have to set this up in Acrobat, not FormsCentral. So you can set up something roughly equivalent to a web form's skip logic, but you'd have to learn how to do this in Acrobat using JavaScript. There is a separate Acrobat JavaScript forum here if you have any questions.
Maybe you are looking for
-
Problem with keydecoder.dll in Crystal Reports 2008 Trial Version
Hello, My company is interested in purchasing Crystal Reports 2008 and has asked me to download and try the trial version. However, I have been running into a keydecoder.dll problem. Setup was smooth and here are the details: Problem message: "Crys
-
Exclude a mailbox from Spotlight
I see how you can exclude (make private) files, so that spotlight doesn't include them in it's searching and listing, but is there a way to exclude a mailbox? I can't seem to figure it out if there is. Thx G5 Dual 2.7 GHz Mac OS X (10.4.7)
-
Script to archive content with out GUI
Hi Friends, I have new requirement to Archive. Instead of GUI base archive, I need Script to archive content, Tables, sitebackup and move to DR system within same network. This should be in a programmatic mode. Once support team will run that script
-
Java SDK in Fedora Core 3 (64 bit)
Ok, I'm running on an AMD 64 so to install the java sdk I downloaded j2sdk-1_4_2_06-linux-ia64-rpm.bin. Next, I followed the instuctions located here: http://java.sun.com/products/archiv...tml#install-pkg This is what my terminal looked like: [root@l
-
Sun Cluster Tools and PBS/Torque support
I hope this is the right forum... The Sun Cluster Tools 8.2 userguide says that PBS/Torque DRM is supported out of the box for OpenMPI and can be confirmed by issuing a command similar to: ompi_info | grep plm but I only get rsh and SLURM: MCA plm: r