POS system reports daily totals for each store, not for each cashier

Hi!
We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS.
This issue concerns the fact that the POS system reports daily totals for each store, not for each cashier.
At my client, the daily settlements are done for each cashier. At the end of day, we will get cash drawers counted with sum of each tender (cash and checks) at the end of day. In addition, the POS system will send sum of each tender, sum of all sales and sum of different finance transactions made each day. However, this u201Ctotals messageu201D is not sent separately for each workstation, or for each cashier, but rather for each store. So we only gets the totals per store.
Questions:
i)     Are the tasks available for comparing totals to the aggregates for POS transaction able to handle u201Cstore-only figuresu201D?
ii)     If not, how can we adapt the tasks so they can handle u201Cstore-only figuresu201D?
iii)     Can we trigger outbound tasks sending WPUUMS and WPUTAB using outbound dispatcher automatically, or must we run this as a manual task of an employee, after checking that all stores have delivered their totals?
iv)     The u201Cstore-only figuresu201D does not include cashier statistics. Do we need the u201Ccashier statisticsu201D as total figures, or can we just populate the BAPI for each POS transaction with data, in order to populate BW infocubes for cashier statistics?
Thanks for any advice !
Best regards,
Oeystein Emhjellen

Hi Kees ...
Your profile indicates you are running Leopard v10.5.8
You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
Make sure your Mac meets Snow Leopard's requirements here.
You must have the minimum of v10.6.6 installed in order to access the App Store.
You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store

Similar Messages

  • How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    How can I view the number of tunes in the Library? The number shows for Playlists but not for the total Library.

    Hello,
    I apologize for submitting this question.  Soon after I posted it I saw a similar question that had my answer..
    Again, my bad for not looking first.
    Ron Morris

  • Table of Contents page numbers works for PDF but not for other formats

    Hi,
    I followed exactly was indicated here regarding creation of TOC.
    http://docs.oracle.com/cd/E10415_01/doc/bi.1013/e12187/T421739T481157.htm
    The page numbers generated correctly for PDF but not for RTF, HTML and XLS.
    (HTML and XLS are understandably not paginated in nature but why not in RTF?)
    Tried to make the simplest example work, with 2 headings each on a separate page. Doesn't work on either MSWord 2003 or 2007.
    What am I doing wrong?
    Regards,
    Jarell
    Edited by: Jarell on Jan 11, 2012 8:08 PM

    Hi Kavipriya,
    What is your email address? I have attached a file in Oracle Metalink, under SR 3-5172030861. named test_toc.rtf
    You may use any xml because the template does not use any dynamic binding of values.
    The template is basically 2 pages, the TOC in the 1st page. First TOC item (Heading 1) is in Page 1, and Second TOC item is in Page 2.
    So the end result should be (PDF result from BI Publisher):
    First TOC Item .................. 1
    Second TOC Item ............. 2
    But for RTF it outputs:
    First TOC Item .................. 0
    Second TOC Item ............. 0
    And after doing Print Preview (once or twice)
    First TOC Item .................. Error in Bookmark
    Second TOC Item ............. Error in Bookmark
    Hope this is detailed enough to illustrate the problem.
    Edited by: Jarell on Jan 17, 2012 10:24 PM

  • WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA

    I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
    Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
    Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
    If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting...  If we need a certain apps (FREE APPS) available only for US based users.
    If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then.....  I want to return all this **** stuffs

    iTunes for Different Countries
    iTunes Store: Which types of items can I buy in my country?

  • How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please.  Thanks

    Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
    iWork > Pages
    contenant Templates > My Templates
    comme il y a un dossier
    iWork > Numbers
    contenant Templates > My Templates
    Depuis le Finder, tapez cmd + f
    puis configurez la recherche comme sur cette recopie d'écran.
    puis lancez la recherche.
    Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
    Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
    Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
    Désolé mais je ne répondrai plus avant demain.
    Pour moi il est temps de dormir.
    Yvan KOENIG (VALLAURIS, France)  mercredi 23 janvier 2011 22:39:28
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • Password works for login but not for the Adobe CC Desktop application

    Password works for login but not for the Adobe CC Desktop application

    Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    ou can try deleting OPM.DB from steps below and try again.
    Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
    Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder.  To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
    3) update to the latest version of the Creative Cloud app.
    Also we would like few more details:
    When has this issue started occurring, was this after installation of any specific adobe product.
    On which platform are you seeing this.
    Also we would like to know if after above steps this issue occurs ever again in future.
    You can refer to http://forums.adobe.com/thread/1239510
    Regards,
    Rajshree

  • I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

    I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

    The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
    http://www.adobe.com/downloads/updates/
    Both Mac and Win links are there.
    If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

  • Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...

    Creative SB0410 digital out only works for dd/dts, not for stereo or web videos...
    Hi all,
    Need some suggestions here.
    I have an old Creative sb0410 7.1 channel card and after reading few long threads, I am able to output dd/dts via 3.5mm to rca connector.
    However, the problem is I only hear sound if the video has dd or dts sound. When I play normal MP3 or youtube videos, there is no sound.
    Is there a way to configure the digital out so it sends all sound to the receiver whether it's dd or dts or regular stereo?
    Thanks

    As a workaround, I used another 3.5mm stereo to RCA adapter on stereo LR output of sound card and hooked to a different input in my receiver.
    Problem, is I have to switch input in receiver for non DTS/DD sounds.
    It's disappointing that my upscaling dvd player sends all sound signals via coax but this card does not.
    Isn't it supposed to send all sound signals via coax regardless whether it is DTS/DD or normal stereo/mono etc?

  • IN REPETATIVE AREA ATTER 9 RECORDS, LOWER BORDER  FOR 10 RECORD NOT FOR ALL

    LOWER BORDER  FOR 10 RECORD NOT FOR ALL RECORDS  (remaining 9 records)
    please clarify as much as possible

    hi Uday
    you have to tell the subject shart & sweet and give the message according to the subject elaborate and clearly.
    then which area do you want to see ?
    regards

  • TS3274 Getting sound for music, but not for game apps.  Checked settings and sound is on.  Any suggestions.

    My volume controls work and getting sound for music but not for game apps.  I did check settings and sound is turned on under notifications and in the app.  Any help would be appreciated

    Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad above the volume switch, or via control centre : swipe up from the bottom edge of the screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off'). The function that isn't controlled via the side switch is controlled via control centre instead : http://support.apple.com/kb/HT4085

  • Disable Control Panel for users but NOT for administrators

    I'm unsure why Microsoft has not yet published this information.  I'm sure that sysadmins everywhere want more granular control of the control panel besides disabling for everyone or enabling for everyone, which is what it seems Microsoft wants me and
    you to do, disable CP for everyone, enable it every time I log on as admin and need to use it, then disable again.  Ridiculous.
    I am a consultant for a large company and our partners like to take as much control as possible.  I do too, for that matter.  Last week I began researching how to disable the control panel for everyone except admins.  I am operating under
    the assumption that non-admin accounts do not need access to control panel and it's better if they don't, especially in a production environment where the terminals the users are operating are mission critical.
    Finally, I found the answer.  I hope this helps you because it took me 3 days to finally find it.  It works.  I've tested it with admin and non-admin.  The great thing is, you can control any GP setting for non-admin users in this manner,
    not just the Control Panel.  You could disable any and all functionality not necessary for day to day operations for all your users but still maintain access to everything by logging on as an administrator.
    The question is answered here
    http://www.sevenforums.com/tutorials/101869-local-group-policies-apply-all-users-except-administrators.html

    Don:
    Sorry for the confusion.  Not sure why my link is bad and yours is good.  They both appear to be identical.
    The issue with executing gpedit.msc is that when you apply a setting, the setting is for all users, even administrators.  If I want to disable access to the control panel, I do so for admins as well when simply executing gpedit.msc, which means if I
    log in and need access to control panel, I have to enable it in GP, do the work necessary and then disable it again (if I remember) when work is complete.  A bit of a drag, especially for busy admins and support techs.  On the other hand, following
    the instructions in the link disables control panel for all users except administrators.  So if I need to work with Control Panel as an admin, I've saved the enable, disable steps and don't have to worry about remembering as well.
    I hope that clarifies.  Thanks for your feedback.
    ok, thanks. I re-read the guide one more time and now I understand the logic - it creates a LocalGPO object, when gpedit.msc is launched in this very special way. It's kind of cool, even if rather niche. (I'm assuming that it only works for LocalGP and not
    for Domain GP).
    I think your original link had a trailing dot, but it's fine now.
    Thanks for clarifying - even after all these years, I am still learning new things :)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • AE - Can we setup a system to only approve some roles and not for others ?

    I would like to setup a test system with no approval of roles access except for some of them ?  Will that be possible and how ?
    Any suggestion ?
    I would appreciate any feedback.
    Thanks.

    Hello Frank,
    Thanks for the information and nice suggestion. This infact is a limitation. We can use this only in case our request has other roles, which have Role owners.
    Dear Patrick,
    Now you may use any of the options mentioned as per what kind of access requests comes in your organization but better to use the one which Frank suggested as this would hold true in all teh cases.
    Regards,
    Hersh.

  • Apple ID has changed for Itunes but not for the App store?

    So I got the iPhone 4s off my dad, and I knew that I would have to change the apple ID to download apps and music etc
    So I changed it, and when I go on to settings it says that it's my ID that is signed in and when I download music everythings fine
    However when I try to update twitter on the app store it's asking for the password to my dads apple ID? It's only on updates though because I downloaded a game perfectly...
    Can anyone help? :}

    They should be the same - assuming that you used the same ID to buy the apps that you are using to update the apps - you should be able to update them. You use the same Apple ID and iTunes account for iTunes media purchases and for app store Purchases. If for some reason the password isn't working try this.
    Go to Settings>Store>Apple ID. Make sure that the ID is correct on the iPad. If the ID is correct but it is not being recognized - sign out of the account, restart the iPad and then sign in again
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Then go to Settings>Store>and sign into your account again and see if you can download now.

  • How do I copy artwork to iPod just once for an album, not for every track?

    I don't download music. All my music is ripped from CDs that I own.
    After I rip a CD, choosing "Get Album Artwork" from the Advanced menu normally works, and if not, I find the highest quality image I can from the web, and copy & paste that into the large box at the bottom left of iTunes.
    It appears that iTunes stores the artwork image once for each track, not once for an album, so for example if an album has 10 tracks, the image is stored 10 times somewhere on my hard drive. This is inefficient, but not problematic.
    However, when I (manually) select & drag-copy the resulting 10 tracks to my iPod, the artwork doesn't transfer along with the tracks. I then have to copy the artwork & having selected all the tracks on the iPod, paste it in. I have the "Manually manage music and videos" option selected, as I simply don't trust the automatic system. I want to supervise what is copied, when, and in what way. I don't necessarily want everything in my iTunes library on my iPod.
    What concerns me is that for each album, the artwork image is stored repeatedly for each track on the iPod, like on my hard drive, not once for an album. As space will be at a premium on the iPod once I start copying more & more of my CDs across (I have only done 9 so far) the point will come where a large number of MB of space will be wasted on the iPod with duplicate artwork, which will mean that I'll be able to fit far fewer CDs on the iPod than would otherwise have been the case. The fact that I have chosen 192 kbps and the AAC Encoder for all my CD ripping also means that the iPod will fill up faster than if I'd used the standard 128 kbps and MP3 settings. I'm not prepared to go below 192 kbps though. My soon to be purchased Sennheiser CX500 earphones deserve that much!
    Is there any way to force iTunes and the iPod to store the artwork only once for each album, and if there is, can this method be retrofitted to the CDs I've already copied to my iPod, or do I have to start again from scratch? I've already filled 670 MB with the 9 CDs, many of which are only 40 or 45 minutes long, so I'm already getting worried!
    Alternatively, am I simply mistaken about all this? Does it only *look like* the artwork is duplicated, whereas it's actually only being stored only once?
    Many thanks.

    In reply to PT:
    Why don't you paste the artwork to the track in iTunes first (fast) THEN send them over to your iPod?
    I already do that. Every track has the correct artwork in place before I copy it to the iPod.
    I ripped about another 10 albums yesterday. Most of the albums got their artwork automatically from the iTunes store. For a few I had to get artwork from the internet.
    When I rip a CD, one of 3 different things happens:
    1. The album get its artwork automatically from the iTunes store, and then when I shift-click all the tracks and drag them to the iPod icon, all the artwork transfers along with the tracks.
    2. As per 1, except the artwork doesn't transfer when I copy the tracks to the iPod. I then copy the artwork from one of the tracks on the Mac, then shift-click all the equivalent tracks on the iPod, and right-click in the large box at the bottom left of the screen, and click on paste.
    3. The iTunes store has no artwork for the album, so I copy the artwork from an image on the internet, shift-click all the tracks on the Mac, and right-click in the large box at the bottom left of the screen, and click on paste. I then shift-click all the tracks and drag them to the iPod icon. They all copy across, but the artwork never does, so I then shift-click all the tracks on the iPod and right-click in the large box at the bottom left of the screen, and click on paste.
    Pasting the artwork to the tracks, in either scenario 2 or 3 above, takes ages (often longer than copying the tracks themselves) and a progress bar appears, listing each track in order as the artwork is added to the track, accompanied by the spinning beach ball. The slowness is mostly down to using USB 1.1, but for a 20 track album, it appears that the iPod is storing the artwork 20 times, once for each track, not just once in total (for the album).
    It appears that in scenario 1 though, the iPod is only storing the artwork once.
    In reply to Landon Dial:
    well first you go to one track, right click and press get info. you go to where it says artwork, right click the image and press copy, then you exiit out of that. then you can press ctrl and select each song you want to have that artwork. if there highlighted then its working. then right click again and press get info. then go to artwork and press paste and it should have copied the image to all of your tracks
    Thanks for your input, but you've completely misunderstood my question. I know how to add artwork to tracks. What I'm trying to figure out is how to force iTunes/the iPod to only store artwork once for each album, not once for each track, even if the artwork comes manually from me finding it on the internet, not automatically via the iTunes store.
    In reply to Chris CA:
    When iTunes gets the artwork, there is only one copy on your computer.
    That single artwork is linked with iTunes to each song on the same album.
    When you add artwork yourself, it is copied directly into the ID3 artwork tag for each song. If you have a 200kB artwork file, each song will be 200kB larger.
    From what you say it sounds like there's no way to force the issue then. If you have to paste in artwork yourself, then it's one copy per track, not one per album. A serious flaw which I hope Apple will address!
    Using playlists is very easy to manage what goes onto your iPod.
    That's true, but I don't really have any need for playlists. I want 95% of what's in my iTunes library copied across (complete albums, with artwork). It's the remaining 5% (the odd individual track, amusing audio files, and other odds & sods) that I don't want copied. Copying things manually suits me fine, and I wouldn't consider another method unless it solved the problem that this topic is about!

  • Lion has killed my built-in mic for Facetime, but not for Quicktime recording or Skype.

    After updating to Lion the built-in mic on my imac doesn't work properly, the person on the other end hears me very faintly. I can't turn it up anywhere. It works fine in Skype, and System Prefs levels are healthy when Facetime isn't running.
    Please help solve this, it's very frustrating.

    So...the Muted-Mic issue continued to happen. I also had a variation of it, where, the person on the other end of the call heard static/crackling noise.
    The static noise issue (just like the muted-mic) went away as son as I plug in the head set on my iPhone 3g...Using the head-set the other end can hear me with out problems.
    The likely culprit is the built-in mic. ( of-course it could be something else, but the mic is the most likely thing...it could be loose or something).
    ....So I take it in to the Apple Store (Genious Bar) Twice.
    On my first visit they did not exchange it...Since the issue did not occur during a 1min test call he did...he asked me to take my phone back and see if it happens again.
    ...of course the issue happened again.
    On my second visit, the Genious suggested that there might be a problem with the SIM.
    ...I was TOTLLY APPALLED by this response.... Read my original post on my problem, and you can probably infer that the SIM is a very unlikely source of the problem (...also, I'm an Cell Phone engineer for a large company for 8.5 years...so I know a thing or two about how cell phones work).
    I did not tell the genious I'm a Engineer ...Maybe I should've.
    After trying to explain to the genious that his suggestion of changing the SIM was not a likely solution he finally agreed to exchange my phone...The phone is under warranty if they want to debug the phone swapping SIMs etc...they should do this on their own time...not mine!!!
    (he changed the phone and the SIM!!).
    So if you see this issue, hope you can get service without having to go back several times, and getting the run around before they exchange a defective unit.

Maybe you are looking for