Posible Production Errors

Hello,
We are going to give 24X7 production support for one of our client, can anybody share their experinces to us.
Could you please help me out.
Thanks n Advance.,
Stallin Xavier

hi,
You need to take look at the Integration server adminstration:-
Administration Tools of Software Components
http://help.sap.com/saphelp_nw04/helpdata/en/f7/c8d34213d9324fa3329dcdf8e7be16/content.htm
Managing SAP XI
http://help.sap.com/saphelp_nw04/helpdata/en/a3/c6d931767dbb4d8a2696b9c72431a9/content.htm
User management
http://help.sap.com/saphelp_nw04/helpdata/en/fd/24bc3ff6beeb0ce10000000a114084/content.htm
Start stop XI
http://help.sap.com/saphelp_nw04/helpdata/en/12/5dd23aaad7b3408dde3c1577fda5b3/content.htm
I hope this will help you.
Reward points if useful
Vishal

Similar Messages

  • How Can I report a Production Error

    When I want to report a Production error in Support portal, I got a error like this
    Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
         S0004554480           Bool
    But I am Bool actually, it's myself. how can I handle it? Does any know it?
    Any response is appreciated.

    Hi,
    As per your query you are not authorised user to log a compliant on SAP Workplace. Please contact your old SAP Basis person who is working earlier you. If you are not getting any support form him then sand a latter to SAP through your Director or CEO who is responsible person. Then sap will enquiry over the phone and ask some hardware information to you, if you fullfil then the will assign the password or create new user for you.
    Anil

  • How to Report a product error in SAP Business One

    Hi Experts
    I have found a product error in SAP Business one
    i need to know how it can be notified to SAP
    Thanks
    Krish

    Hi Krish,
    If You Post a Meessage to SAP Support Center
    Require S-user ID and Password
    First post a message to SAP Support Center with what problem you are facing.
    then he analyse your problem and told its a BUG or some other workaround.
    Check the following thread
    Re: How to Send message to SAP Support center
    *Close the thread if issue solved.
    Regards
    Jambulingam.P
    Edited by: Jambulingam P on Aug 13, 2009 12:35 PM

  • Systems no longer exist on Report A Product Error page

    When I go to SAP Support Portal and click "Report a Product Error" I am prompted to choose the system I am submitting a request ticket for. 
    When I use either search feature, my system (SBOP formerly known as EPM-PLA in the SAP universe) is not available.  Previously I had two systems available - development and production - and now there are none and I can't even proceed.
    What happened and what am I supposed to do now?  Also, when I go to my message Inbox there are no messages even though I have submitted many tickets and communicated with the support several times before.

    I didn't expect any support personnel to read it and respond or provide assistance but I did expect somebody might have an answer.  Why would our installed systems suddenly change without authorization?
    Thanks

  • I'm trying to reinstall photoshop CS5 in a new laptop but i have an "The serial number is not valid for this product" error

    I'm trying to reinstall photoshop CS5 in a new laptop (pc) but i have an "The serial number is not valid for this product" error.
    I have deactivated photoshop in the old computer.
    The old laptop have photoshop installed with the DVD but the new laptop don't have DVD so i downloaded cs5 from Download CS5 products. ¿Maybe doing this is an error?

    the installation files work the same whether from a  disc or download, but there are other ways to mismatch a serial and installer.
    Error "The serial number is not valid for this product" | Creative Suite

  • BI Production errors

    Hi,
    Can anybody please give me SAP-BI Production Issues pdf,
    i search on google t i got BW Production Isusues pdf. but i want exclusively bi production error pdf.
    Thanks and Regards.
    Asim.
    this is a commonly discussed topic - please search the forums before posting

    . Time Stamp errors:     This can happen when there is some changes done on data source and data source is not replicated.
    Execute T code SE38 in BW give program name as RS_Transtruc_Activate_All and execute the program. Give Info source and Source System and activate. This will replicate the data source and its status is changed to active. Once this is done, delete the request by changing technical status to red and trigger Info package to get delta back from source system.
    2. Error log in PSA- Error occurred while writing to PSA: This is because of corrupt data or data is not in acceptable format to BW.
    Check the cause of the error in Monitor in Detail tabsrip.This gives the record number and Info object having format issue. Compare the data with correct values and determine the cause of failure. Change the QM status of request in data target to red and delete the request. Correct the incorrect data in PSA and then upload data into data target from PSA.
    3. Duplicate data error in Master data uploads: This can happen if there are duplicate records from the source system. BW do not allow duplicate data records.
    If it is a delta update, change the technical status in the monitor to red and delete the request from the data target. If it is full upload delete the request.
    Schedule again with the option in the Info package, u201Cwithout duplicate datau201D for master data upload.
    4. Error occurred in the data selection: This can occur due to either bug in the info package or incorrect data selection in the info package.
    Data selection checked in the info package and job is started again after changing the technical status to red and deleting the error request from the data target.
    5. Processing (data packet) Errors occurred-Update (0 new / 0 changed): This can be because of data not acceptable to data target although data reached PSA.
    Data checked in PSA for correctness and after changing the bad data uploaded back into data target from PSA.
    6. Processing (data packet) Errors occurred-Transfer rules (0 Records): These errors happen when the transfer rules are not active and mapping the data fields is not correct.
    Check for transfer rules, make relevant changes and load data again.
    7. Missing messages - Processing end Missing messages: This can be because of incorrect PSA data, transfer structure, transfer rules, update rules and ODS.
    Check PSA data, Transfer structure, transfer rules, Update rules or data target definition.
    8. Activation of ODS failed: This happens when data is not acceptable to ODS definition. Data need to be corrected in PSA.
    Check for Info object which has caused this problem in the monitor details tab strip. Delete request from data target after changing QM status to red. Correct data in PSA and update data back to data target from PSA.
    9. Source System not available: This can happen when request IDOC is sent source system, but the source system for some reason is not available.
    Ensure that source system is available. Change technical status of request to red and delete request from data target. Trigger Info package again to get data from source system.
    10. Error while opening file from the source system: This happens when either file is open or file is not deposited on server or not available.
    Arrange for file, delete error request from data target and trigger Info package to load data from file.
    11. While load is going on in R/3 table is locked: This happens when some data source is accessing R/3 transparent table and some transaction takes place in R/3.
    Change the technical status of job to red in the monitor and retrigger the job again from R/3.
    12. Object locked by user: This can happen when user or ALEREMOTE is accessing the same table.
    Change the technical status of job to red, delete request from data target and trigger Info package again. If its delta update it will ask for repeat delta, Click on Yes button.
    13. Process Chains Errors occurred in Daily Master Data: This occurs when Transaction data is loaded before Master data.
    Ensure to load Master data before Transaction data. Reload data depending on update mode (Delta/Full Update)
    14. Processing (data packet) No data: This can be because of some bug in Info package, rescheduling with another Info package corrects the problem.
    This type of problem we can solve with copy the Info package and reschedule the data.
    15. Database errors Enable to extend Table, enable to extend the Index: This is due to lack of space available to put further data.
    16. Transaction Job Fails Giving Message: u201CNO SID FOUND FOR CERTAIN DATA RECORDu201D is due to some illegal characters for the Data records.
    17. Error Asking for Initialization: If you want to load data with the delta update you must first initialize the delta process. Afterwards the selection conditions that were used in the initialization can no longer be changed.
    18. Job Failure at Source System: Go to the background processing overview in the source system. You can get to this with the Wizard or the menu path Environment -> Job Overview -> In the source system (This is the alternate path to see the u201CJob Overviewu201D at the Source System.)
        At source system you can see the reason for the Job Failure. Thus we need to take the action accordingly.
    19. Invalid characters in load: BW accepts just capital letters and certain characters. The permitted characters list can be seen via transaction RSKC.
    There are several ways to solve this problem:
    1)     Removing erroneous character from R/3 (for example required vendor number that need to be changed can be found from PSA from line shown in error message)
    2)     Changing or removing character in update rules (need to done by ABAP)
    3)     Putting character to BW permitted characters, if character is really needed in BW
    4)     If the bad character only happens once then it can be directly change/removed by editing the PSA
    5)     Put ALL_CAPITAL in permitted characters. Needs to be tested first!
    Editing and updating from PSA, first ensure that the load has been loaded in PSA, then delete the request from the data target, edit PSA by double clicking the field you wish to change and save. Do not mark the line and press change this will result in incorrect data. After you have corrected the PSA, right click on the not yet loaded PSA and choose u201Cstart immediately.u201D
    20. Update mode R is not supported by the extraction API: This happens for loading of delta loads of MD attributes. Why has not been covered. Replicate the data source. Use SE38 and function module TRANSTRU_ACTIVATE_ALL.
    Subsequently perform an initial load.
    1.     Go to the info package.
    2.     Delete the previous initial load
    3.     Load the initial
    4.     After the initial is successful check the solution by loading a delta
    Thanks & Regards
    Praveenyagnamurthy

  • I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    I started the OS system from a backup hard drive. Now My Adobe products doesnt work. "the licensing does not work for this product" Error code 150:30. Help me please!!

    Reinstall the software properly. migration/ backups do not work due to the specific requirements of the activation system.
    Mylenium

  • SnowLeopard DVD had production error, installation issues

    Installed 10.6 on a MacBookPro 10.5.8 but installation quit halfway with an error message to contact Apple (no error number).
    2nd attempt from same DVD also stopped ca. halfway.
    Returned DVD to shop, used other DVD and installation could now be completed so the conclusion was the first DVD had a production error .
    Some startup issues with FileMaker Server which I tried to address with Terminal but Terminal crashes. Rebooted several times but problem perseveres.
    Is there a way to re-install Terminal program seperately ?
    Apple Care phone support unavailable. With this sort of errors, they will be very busy I presume...

    Sijmons wrote:
    Currently downgrading to 10.5 and restoring from TimeMachine as I have no time to look into this further.
    Be sure to erase your disk.
    Read about downgrade installs
    "You should not reinstall an earlier version of the same software over a later version. These "downgrade" installs may seem to work, but Apple does not test nor recommend downgrade installations in most cases. Some installers prevent downgrade installations. If you need to reinstall an earlier version of Mac OS X, erase your disk first or choose the erase option in the Mac OS X Installer. Be sure to reinstall any software updates after reinstalling the operating system."
    -mj

  • Co- Product Error while creating a production order

    Hi,
    While performing the Co-Products Approtionment at the time of creation of Production order..
    we are facing a problem regarding cost apportionment I have crated a Source Structure and the cost element is assigned to that Source Structure but still iam facing this issue
    kindly help me out.
    the error msg is
    Debit with cost element 9460404 cannot be settled.
    Message no. KD549
    Diagnosis
    Costs/revenues exist for cost/revenue element 9460404.  This cost/revenue element was given source assignment 40 in the source structure (-> settlement rule for sender -> parameters).  However, there is no distribution rule with settlement type FUL for this source assignment or the total of the percentages for the rules is less than 100.
    Note:
    Full settlement settles all the costs and revenues which have occurred up to the settlement period and have not already been settled. In the case of periodic settlement, you can configure the settlement profile so that all the costs occurring in the settlement period are settled, or if an amount less than 100% can be settled.
    Procedure
    Maintain the distribution rules for source assignment 40 and settlement type FUL or use periodic settlement to settle less than 100%.  Change the settlement profile for the sender as necessary.
    Change settlement profile
    Note:
    Cost and revenue elements receive source assignment " " if you have not entered a source structure in the settlement rule parameters.

    Hi Krishna Murthy I went through the note but i couldnt recive a big help from that note.
    I will explain the step by step process that i have done.
    I am attaching the Screen shots of the issue.
    1. For co-products I have created a source structure and Sec. Cost Elements were assigned in the source structure.
    2. The source structure was assigned in the Material Master for co-products equally distrubuting the amount between 2 materials.
    3. When we are trying to create a production order the error was displayed but the costs was getting calculated properly.
    4. When I was settling the production order the same error was getting displayed.
    I have tried various methods to resolve it.
    1. I have created a periodic settlement rule and tried to settle but it didnt work
    2. I have assigned the source structure in the settlement profile this also didnt work.

  • FRM-41211: Integration Error: SSL failure running another product Error

    Hai,
    I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
    user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
    following error(especially the First print after restart the computer).
    FRM-41211: Integration Error: SSL failure running
    another product
    After that if you print further for transaction no plm. only it gives the error first time of print
    So Please give the solutions immediately. I am waiting for Ur favourable Reply.
    Ur's Shahul

    As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
    You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
    1) Do not run more then one asynchronous report per session
    or
    2) Use a delay loop before calling the next report.
    It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
    Chad

  • Production error - Urgent -  TSV_TNEW_PAGE_ALLOC_FAILED

    Hi All,
    Im getting dumps in production system with
    Runtime Error:          TSV_TNEW_PAGE_ALLOC_FAILED. and when checked the trace, it says as Data type "MCVBAPB" was found in a newer version than required.
    Any pointers to this wil be helpful
    thanks
    Booma

    the TSV_TNEW_PAGE_ALLOC_FAILED dump has naught to do with the version of MCVBAPB. the dump clearly states that there was no more paging area available to run the report/transaction that caused the dump. this might either be due to an too big selection or a lack of memory. Consult your basis-people with that one.
    the version of MCVBAPB: MCVBAPB is a structure belonging to LIS (Logistics Information System) so obviously someone changed that structure. check in t-code SE11, MCVBAPB the runtime and the database object of the structure (in case it is active).

  • BPEL product Error,May i know how to resolve

    Hi All,
    I have installed 10.1.3.1 and applied 10.3.4 path set,
    Installation status is well and good,now i created a sample BPEL App,Deployed Every thing goes fine.
    I log into BPEL console ,i am able to see the instance created.
    Now, i logged as BPEL Admin,It it throwing following Exception.
    Can any body faced the same issue,Can an ybody help me to resolve this?
    Oracle BPEL Process Manager Full Cycle
    An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
    Build Information:
    Oracle BPEL Server version 10.1.3.4.0
    Build: 0
    Build time: Fri Jul 18 07:32:24 PDT 2008
    Build type: release
    Source tag: PCBPEL_10.1.3.4.0_GENERIC_080718.0645
    Exception Message:
    java.security.AccessControlException - access denied (com.collaxa.security.ServerPermission server read)
    Edited by: user12017046 on Oct 20, 2009 1:39 AM

    Have you run the sql scripts for the 10.1.3.4 patch on 10.1.3.1 ? Did you receive any error during the installation ? following forum entry may help you SOA SUITE 10.1.3.4 BPEL Console Login Issue

  • Deployment of upgraded site from staging to production - error when trying to access "Content and Structure"

    Hi,
    We recently upgraded a site from SP 2010 to SP 2013. For moving to production, I copied over the content database to production and used the following command to to make the content database accessible in production:
    Mount-SPContentDatabase -Name 'WSS_Content_SSBC' -WebApplication 'https://biprod.bljc.com'
    I then change the host name of the site from staging to production host name using
    $site = Get-SPSite  https://stagingsite.companyname.com
    $site.Rename("https://prodsite.companyname.com")
    The site loads and I can see my content. But when I try to use the "Content And structure" link under "Site Settings" --> "Site administration"
    I receive the following errror:
    Sorry, something went wrong An unexpected error has occurred.
    Technical Details
    Troubleshoot issues with Microsoft SharePoint Foundation.
    Correlation ID: 3fbfcd9c-7185-10a2-6d19-8570d7f15319
    Date and Time: 11/19/2014 3:38:31 PM
    IN THE ULS LOG, THIS IS ONE OF THE ERRORS:
    Application error when access /_layouts/15/sitemanager.aspx, Error=Object reference not set to an instance of an object. 
     at Microsoft.SharePoint.Publishing.Internal.WebControls.ObjectSerializer.DeleteAllowed(Boolean checkPermissions)   
     at Microsoft.SharePoint.Publishing.Internal.WebControls.SmtButtonField.FormatDataValue(Object dataTextValue, Boolean encode)   
     at System.Web.UI.WebControls.BoundField.OnDataBindField(Object sender, EventArgs e)   
     at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)   
     at System.Web.UI.Control.DataBindChildren()   
     at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)   
     at System.Web.UI.WebControls.GridView.CreateRow(Int32 rowIndex, Int32 dataSourceIndex, DataControlRowType rowType, DataControlRowState rowState, Boolean dataBind, Object dataItem, DataControlField[] fields, TableRowCollection rows, PagedDataSource pagedDataSource)   
     at System.Web.UI.WebControls.GridView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding)   
     at Microsoft.SharePoint.WebControls.SPGridView.CreateChildControls(IEnumerable dataSource, Boolean dataBinding)   
     at System.Web.UI.WebControls.CompositeDataBoundControl.PerformDataBinding(IEnumerable data)   
     at System.Web.UI.WebControls.GridView.PerformDataBinding(IEnumerable data)   
     at System.Web.UI.WebControls.DataBoundControl.OnDataSourceViewSelectCallback(IEnumerable data)   
     at System.Web.UI.WebControls.DataBoundControl.PerformSelect()   
     at System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound()   
     at System.Web.UI.WebControls.GridView.OnPreRender(EventArgs e)   
     at System.Web.UI.Control.PreRenderRecursiveInternal()   
     at System.Web.UI.Control.PreRenderRecursiveInternal()   
     at System.Web.UI.Control.PreRenderRecursiveInternal()   
     at System.Web.UI.Control.PreRenderRecursiveInternal()   
     at System.Web.UI.Control.PreRenderRecursiveInternal()   
     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    BTW, don't know if this applies but production is load balanced and staging is not.
    Thansk,
    Sherazad
    Sherazad

    Hi Sherazad,
    As the Content and Structure is enabled by the SharePoint Publishing feature, I recommend to deactivate and re-activate the publishing feature with the command below to see if the issue still occurs:
    Disable-SPFeature –identity Publishing -URL <sitecollection url>
    Enable-SPFeature -Identity Publishing -url <sitecollection url> -Force
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Product :  Errors in attribute hierarchy structure SAP BCA   000164

    Hi All ,
    When ever i create /Display /Change Product in
    Financial Supply Chain Management --> In House Cash > Master Data>Product Definition--> Product --> Create /Change/Display
    system through below mentioned error .
    I tryed to resolve problem as per below mentioned program through se38 , but still getting same error
    Errors in attribute hierarchy structure SAP BCA   000164
    Message no. FIPR217
    System Response
    An error was found in the attribute hierarchy.
    In some cases, it is not possible to display the attribute hierarchy without having to correct the errors first.
    Procedure
    It is recommended that you run the FIPR_CLEAN_ATTRIBUTES (by using transaction SE38).  This report can recognize errors, and it attempts to correct them automatically.
    Caution: This report can change your table entries permanently.
    Once this report has run, you need to check the hierarchy structure, and make any necessary changes.
    Regards
    Prakash Sharma

    Hi,
    the realignment (KEND) does not change the line item tables (CE1***, CE2***), thats why they remain unchanged.
    The line items in CE1**** can not be changed. If you really want to have new line items (with the new prod. hierarchy) try in test-client if the use of report RKECADL1 and the new transfer to CO-PA for the deleted line items (KE4S, KE4SFI,...) can help you (SAPNET-note 69370 for details).
    CE2**** + SQL-error: As per now, I don't have an idea how to deal with that cases.
    best regards, Christian

  • Please uninstall and re-install this product Error Code 6

    I have 7 users running single licenses of Adobe Acrobat X Standard and 5 users running a multi license version of Adobe Acrobat X Pro. between Wed 14/01/15 and Thursday 15/01/15 all of these products stopped working on all machines. All machines are windows 7 machines. They are throwing up
    "Configuration Error"
    Please uninstall and re-install this product.
    Error code 6.
    It then closes the program
    When i run this product as an administrator the error message still appears but it allows the program to run. When i then close the program it does not close to process so the next time i open adobe it gives me the error message that the product is not licensed. I assume this is due to the product running in 2 instances.
    I have tried:
    un-installing the product,
    i have currently set all my users to local admins to have a work around.
    I have used the adobe clean up tool and removed everything i can think of to do with adobe.
    I have re-registered the products
    I have edited to permission and followed the guide for Error Code 16 as it was a similar problem.
    None of the above has worked so far.
    This is now a matter of urgency and any help would be appreciated.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for