Positioning and a play issue...

hi,
I am trying to lower this flash based 'play' button via a custom class. Can you please advise how I can lower it down without affecting the text next to it?
also, the music track does not play via this html page, however, if I type in the direct url for the button, and click it, the track is called upon and does play (meaning my actionscript is working and doing its job. so,it must have something to do with the way it is entered in the html? any ideas as to what the issue is with that?
thanks so much!!
http://c2cstudios.com/test/

Hi
First the playing of the track. The fact that you say it plays when the address for the swf file is inserted directly into the browser, indicates that the problem is with the linking of the file in your actionscript relative to the html page, (it must be relative to the html file not the swf file). The simplest solution is to create your html page in the same position in the file structure as your swf file.
Alternatively you can do it the reverse way and create your swf/fla file in the same position as your html page.
As for the positioning of the play button, the simplest way would be to position the background image to match the button. If this is not possible (breaks the design), then try moving or increasing the height of the flash player to match.
PZ

Similar Messages

  • Odd coverflow glitch and music playing issues

    I'm having an odd problem with the coverflow on my ipod where some album covers appear as a pixelated mess. Also i have an issue where during the song (or at the beginning) it will go quiet for about 20 seconds or more and then continue playing effectively skipping 20 seconds of the song or in some cases the song will be not play at all. I have a 4th gen ipod touch running iOS 4.2.1, i recently had some trouble performing a restore (itunes error 37 =s) and it took near 5 attempts to get my ipod restored.
    Any help is appreciated

    Thanks for response.
    This was not an issue with any iPod in the past, but I usually list my albums in more a category way than the actual album name.
    With over 3000 songs, many one song from an actual album, I'd have so many albums it does not make a lot of sense (to me) to organize one's collection that way.
    So I listed my albums as: Rock, Folk, Jazz, World Music, Classical, etc., etc. That helped (me) organize the large collection better. So maybe Coverflow in the iPod Touch 2G is reading all these categories only once. I don't know why - as I said previous iPods I've owned (Incl. the Classic) showed each artist and "album" in Coverflow.
    As I say, I saw no point of listing by actual album names as much of my collection is not by an actual album, by a song or two from each album.
    However, my way of organizing helped me. If I just wanted to hear Rock (and not Classical, Jazz, etc.), I would just click to play my Rock album.
    Under Genre, I would break it down further. For example, under my World Music 'album," I would list songs by country: Mali, Italy, Cape Verde, etc., etc.
    At any rate, I wonder if this is the glitch under iPod Touch 2G - it only reads my album categories once and just lists the first song only under each.

  • I updated my ipad1 thru iTunes from 4.2.1 to 4.3.5 and now having issues, especially playing videos. Anything I should know. I have not jail broken my iPad and don't want to.

    I updated my ipad1 thru iTunes from 4.2.1 to 4.3.5 and now having issues, especially playing videos. Anything I should know. I have not jail broken my iPad and don't want to.

    you update it by connecting it to a computer running itunes and starting itunes up on the computer clicking on it in devices and clicking on the update button in the content menu
    if it say you have the latests then it's because you don't own an iphone 3gs but an iphone 3g where the version 4.2.1 was the last released
    in that case you can't ever update it
    http://en.wikipedia.org/wiki/IOS_version_history#Current_versions

  • HT204406 am having issues with songs playing in there entirety.  song starts playing and then half way stops and starts playing the second song of say a minute or so and then no sound until end of second song.   it then starts to play third song and it do

    any one having issues with songs playing in there entirety using itunes match?  plays parts of songs and skips and starts playing second song.  part and then keeps playing with no music.  does this on every set of songs.

    I'm having this issue on my iPod and now none of my songs on iTunes will play. Not fix yet though. Have you had any luck?

  • Issues with Recently added and recently played

    When I sync my iPhone, my recently added and my recently played wont sync to my phone. Why?

    More info?
    Can those playlists be checked like the other playlists that are syncing to your phone?
    Can the songs in those playlists even be played?
    without that info I'd start with making sure iTunes is up-to-date or deleting and re-creating those playlists.
    HT1801 shows how to create a smart playlists which is what each of those are.
    "Recently Added" be default is stuff added in the last 2 weeks and "Recently Played" is any music played in the last 2 weeks.

  • WRT320N. Port forwarding help. Xbox and ps3 playing at same time. NAT issues

    Hi
    I'm trying to have both my xbox and ps3 play with open NAT's for online gaming. I have had success utilizing info from 'portforward.com'. But the solutions will unlock OPEN NAT for either the ps3 or the xbox .. one at a time. Is there a way to get both to be open?
    It seems like one main conflict is the success depends on both utilizing port 3074. But I can't have both use it? ( obviously).
    I tried port forwarding the xbox per specs off of this forum and that works great.. And DMZ ing the PS3. But like i said before. Most solutions
    leave one console with OPEN and one with Moderate.
    Is there a solution that allows both NAT OPEN's on both consoles? 

    First of all XBOX works on a different port number and PS3 works on a different port numbers. Follow the steps below to open the ports on your router for XBOX and PS3. 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
     This settings are for your XBOX.
    On the set-up tab change the MTU Size to 1365 and click Save Settings...
    Click on "Administration" tab and disable the option UPnP and click Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3)Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...
    For PS3 Follow the steps below
    Click on "Administration" tab and disable the option UPnP and click Save Settings...
    Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 80 and End box type in 80, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    2) On the second line in Application box type in DEF, in the start box type in 443 and End box type in 443, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    3) On the third line in Application box type in GHI, in the start box type in 5223 and End box type in 5223, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    4) On the fourth line in Application box type in JKL, in the start box type in 3478 and End box type in 3479, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    5) On the fifth line in Application box type in MNO, in the start box type in 3658 and End box type in 3658, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box...
    6) On the sixth line in Application box type in PQR, in the start box type in 10070 and End box type in 10080, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box and click on Save Settings
    7) Now assign the given ip address on your PlayStation ip address :- 192.168.1.20, subnet mask :- 255.255.255.0, default gateway :- 192.168.1.1...
    8) Also assign the dns addresses on the PlayStation Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
    9) Turn off your modem, router, and PlayStation...Wait for a minute...
    10) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the PlayStation and test it...

  • I imported a video I make in another program and I played it back in the video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12

    I imported a video I make in movie maker program and I played it back in the premiere video editor and I like the pan and zoom that was added by the program how do I save a copy with the effect of Premiere elements 12
    all I did was played it back how do I save that and make a new version of the video beacause when I save a copy the effect look I was trying to save was not there.
    Rodney
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    silkman1
    I would be glad for the opportunity to customize a Premiere Elements 12 answer to your Premiere Elements 12 issue.
    But, I want to make sure that we are together on the details. This is my understanding of what you have written. Please review and let me
    know if I am misinterpreting anything that you have written.
    You have a video created in Windows Movie Maker.
    How did you output the video from Windows Movie Maker...wmv or mp4, what was the frame size and frame rate of that export?
    Next you import that video into Premiere Elements 12 (can we assume that this is on Windows 7, 8, or 8.1 64 bit?)
    From what you wrote, you have applied a pan and zoom effect to your video in Premiere Elements.
    Now you go to export the Premiere Elements 12 Timeline content with your video with the pan and zoom applied.
    But, the pan and zoom effect is not seen in playback of the export.
    Is all of the above correct so far?
    If so....we are going to need some more details from you...
    a. What is the project preset that you or the project are setting to match the properties of the video coming from Movie maker? See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Rate, and Pixel Aspect Ratio even if the fields look grayed out.
    b. Are you applying the pan and zoom effect with the Pan and Zoom Tool, fx Effects Presets, or keyframing the Scale (for Zoom) and
    Position (for Pan) in the Motion Panel expanded?
    c. What are you selecting as your export in Publish+Share/. Please give details...are you using default settings or customizing the export
    setting under the Advanced Button/Video Tab and Audio Tab of the preset selected?
    I am suspecting some sort of mismatch of your project settings or some problems with working with the Pan and Zoom tool. I need
    your answers to help me help you. If I have written anything that you do not understand, please let me know. I will re-write if necessary
    so that we are in sync to resolve the issue.
    Thanks.
    ATR

  • AE CS5 (10.0.1.19) Ram Preview - Audio stops and continue playing randomly

    I already reported this issue to Adobe as a BUG but I want to ask here if somebody else have this problem or can confirm it.
    Audio breaks/stops and continue playing randomly when 'Ram Previewing'
    It happens mostly when the RAM is fully filled up with image cache files! When the Ram is not filled up totally with image cache files it happens rarely!
    Steps to reproduce BUG / issue:
    1. create a new composition with a length of for example 5 minutes.
    2. create a new solid with size of 50x50 pixel and animate the position of the solid for a very long time so when ram previewing the whole ram/memory gets filled up with different image cache data (this is very important!). Alternatively you could use a long video file to fill up the RAM completely.
    3. import a wave file .wav 16bit 48khz uncompressed which is very long for example 5 minutes.
    4. insert the wave file in the earlier created composition which contain the animated solid or video file.
    5. Set the work area bar (preview range) for the whole composition.
    'Ram Preview' the composition until the whole RAM/memory is filled up with image data.
    AE has to stop rendering because there is no more space available in RAM.
    make sure 'from current time' checkbox is off.
    6. listen to the audio which stops playing randomly for about 1-2 seconds and comes back and continues playing (***BUG***)
    7. Now set the right handle of the composition work area bar (preview range) to less then the maximum RAM size
    (less then the green cache indicator on the right side)
    8. "Purge image caches" or "Purge All"
    9. Ram preview the now smaller work area
    10. listen to the audio. The audio breaks are gone! (***Workaround***)
    Additional information:
    I have the latest After Effects CS5 update installed (10.0.1.19)
    This behavior is tested with different audio drivers inside After Effects CS5 (After Effects WDM Sound, Generic Low Latency ASIO Driver,  ASIO DirectX Full Duplex Driver)
    I also tried different Sample Sizes Buffers (alternatively to the default 2048 samples) but without success.
    Reducing the amount of RAM which After Effects can access didn't solve the problem!
    System:
    Win7 64bit all latest Updates, 8GB RAM, CPU: intel Core 2 Extreme QX9300, nVidia Quadro FX 2700M, IDT High Definition Audio Driver v6.10.0.6227
    There is no driver problem on my system because After Effects CS3 & CS4, Premiere & Soundbooth CS3 CS4 CS5 have no audio problems!
    I have lots of other professional audio software like Steinberg Cubase 5.... on the same system and they all work fine.
    I also turned off AVG Anitivirus and Windows firewall for testing without success.
    AdobeQT32Server.exe, dynamiclinkmanager.exe, PProHeadless.exe, afterfx.exe do not get blocked by firewall they have full permission.
    The CS5 Production Premium installation went fine and without errors and antivirus protection was turned off for the installation.
    Any help would be nice!
    Felix

    Yep, I agree with craulmedia....
    It's 1 month ago after my initial post and no valuable feedback from Adobe although I filled out the bug report in addition to this post and provide my email for further information.
    The only reason for upgrading from CS4 -> CS5 production suite was the use of all my 8GB RAM in AE and now AE can use it but when it's using it the audio have issues.
    CS5 is on the market for nearly a year and still have such essential issues... And my fear rises there will be no valuable update fixing these issues but instead Adobe forces me to upgrade later this year to CS6 in hope something change...
    I have had support request for different Adobe products in the past including telephone support, web support via Adobe ID... none with success the web support answered my request 3 weeks later with the message they will look into it... time went by and in the end the result was "Yes we know it's a known bug" the bug did not get fixed for that CS version. it even exists in the next major CS release! (talking about EncoreDVD here). Once the web support answered weeks later when I was in holidays and after some days I was not able to respond they closed my case. I reopened the case but never got an answer! Telephone support is nearly waste of time because in 95% of all cases it does not help to reinstall the whole operating system and talking to people who know less about computers in general or Adobe products then my mom - it's a waste of time.
    I don't want to blame here anybody for things happend in the past I just want to point out that this time I choose an other support channel (bug report and forum post) but it seems that this support channel is also a waste of time after 1 month with no valueable feedback!
    I bumped up this post 2 times and thanks to craulmedia for the third time.
    And now here is my fourth time *BUMP*
    All I got so far is: "I saw your bug report it's in the queue"
    Is it still in the queue? which queue nr. does it have? how long will it take to get any answer? is it reproducible? Is it confirmed as a known bug by Adobe? Is Adobe working on a fix? When will this fix be available? Is the fix provided in form of an update or in the next major release?
    OK, I know this is a user to user forum and Adobe people only stop by in their free time and there is no guarantee for any real support.
    But it started out so good in the first time...
    Last 2 things I want to add here:
    1. Why should I provide my email in the bug report? Sure so Adobe can get back to me for further information... but wouldn't it be nice if Adobe would be so kind to give some status report to that given email as a small present for the enthusiastic beta testers ?
    2. please Adobe take a look at www.uservoice.com already Autodesk started to move there with 3ds Max.

  • X-Fi XtremeMusic MIDI recording issues and other SoundFont issues

    I am attempting to record output from the MIDI synthesis through "What U Hear", but seem to be getting periodic pops. This is while recording at 24/48 - the problem is much worse at 24/96; I get a constant scratchy noise or silence until I stop recording. Note that I am in "Audio creation mode" at this stage.
    Additionally, I have found that while having 3rd party SoundFonts loaded and playing a MIDI file, I experience the following issues - missing notes and percussion and notes playing with with the wrong pitch.
    Is anybody else experiencing these issues? I am using the latest 1187 drivers.
    Cheers

    DSM wrote:
    I am having issues with the balance of the input signal from my turntable to my Elite Pro. The turntable in connected to Aux 2 with the switch on the console in the phono position. The signal from my turntable (B&O RX2) is slightly off balance with the left channel signal slightly higher than the right channel. I have attempted to use the Master Auxiliary Balance control in audio creation mode to balance the signal during recording. Unfortunatly I have not been able to make it work as adjusting the balance control has no impact on the recorded signal. I have worked with Creative and to date they have not provided a working solution. I have moved my card from one slot to another, uninstalled and reinstalled the software on numerous occasions and taken every step suggested by Creative. I have an ASUS A8N SLI Premium motherborad. Creative thinks the board may be the issue. Does anyone have any suggestions?
    - old cardridge/stylus being worned out,
    - weak connectors/connections,
    - too light stylus pressure (try 2-3 grams),
    - dirty/dusty stylus,
    - mispositioned stylus (not straight, wrong 'arm'length (if adjustable),
    - wrong connection imbedance,
    You can also try if connecting turntable through amplifier (w/ RIAA) to X-Fi Line-In makes any difference --> shows out, if the RIAA pre in X-Fi is not working properly.
    jutapaMessage Edited by jutapa on 09-05-2006 0:30 AM

  • I have a 2nd generation iPod....I have switch on the OFF position and it will periodically turn on (thus draining the battery) by itself.  How can I fix this?

    I have a 2nd generation iPod shuffle.  Recently, after I turn switch to OFF position, it will turn on (green light flicks on) by itself periodically and obviously battery gets drained.  How can I fix this?

    I don't know of a way to fix an issue with the switch, if it's a hardware issue.  You can try doing a Restore on the shuffle in iTunes, to see if there's some software glitch.
    However, I often leave my shuffle with the power swtich in the ON position.  When you are not playing music, the shuffle goes into a "sleep" mode after about a minute.  You'll notice that you need to press the Play button twice to get it to play again; the first press wakes it up.  In my day-to-day experience, I don't notice any difference in battery life between the shuffle being OFF and ON (and not playing), even if I leave it ON overnight.  And keeping it ON avoids needing to constantly move the tiny swtich, and saves it from wear and tear.
    So, you might try just keeping the power swtich in the ON position, and pausing playback to "turn it OFF."

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • The Ultimate Guide to Resolving Profile and Device Manager Issues

    The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
    Hello,
    I have been plagued with Profile Manager and Device Manager issues since day one.
    I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
    I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
    In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
    Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
    (Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the  operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile  and Device Manager may need a Code Signing Certificate.
    The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
    The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
    I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
    I shall outline a sensible strategy:
    1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
    2. Start the server fom the clone and shut down ALL services.
    3. It may be sensible to set up a root user access.
    4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
    5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
    6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
    In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
    Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
    Erase database:
    sudo /usr/share/devicemgr/backend/wipeDB.sh
    7. Note your Directory (diradmin) password for later if you want to re-use it.
    8. Open Open Server Admin and demote OD Master to Standalone Directory.
    9. In Terminal delete the old Certificate Authority
    sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
    This step is crucial because else re-building you OD Master will fail.
    9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
    10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
    11. Go back to Workgroup Manager and re-import users and groups.
    NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
    12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
    If the home directory has not been defined you cannot login from a network account.
    13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
    sudo serveradmin stop devicemgr
    sudo serveradmin start postgres
    sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
    sudo serveradmin start devicemgr
    14. You can now switch back on your services, including Profile Manager.
    In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
    15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
    16. Check that Apple Push Notifications are set.(you easily check if they are working later)
    17. You may want to re-boot OS Server from the clone now.
    18. After re-boot open Server App and check that your server is running well.
    19. Delete all profiles in System Preferences -> Profiles.
    19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
    20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name  should read "Trust Profile for...) and underneath in green font "Verified".
    21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
    22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
    Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
    Now enjoy Profile and Device Manager !
    Regards,
    Twistan

    HI
    1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
    You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
    2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
    You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
    also make sure that u have the message processing role
    Hope it clarifies ur doubt and resolve ur prob
    Regards
    Prakhar

  • I've bought a few songs recently and they played the first day but now it says that i need to Authorize my computer with is already authorized How can I fix this?

    Ive bought a few songs recently and they played the first day but then when i go to play them again it say i need to Authorize the computer which is already authorized I don't understand can someone help me??

    Hello there, HelpMePlease117.
    There is a good Knowledge Base article that helps resolve authorization issues you might want to look over:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Any one of the steps listed there should help you get to the bottom of your issue and resolve it for you.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I purchased a song on my iMac on iTunes and it plays on that but won't play on my macbook even though both computers are authorized under the same iTunes account.  how do I fix this?

    I purchased a song on my iMac on iTunes and it plays on that but won't play on my macbook even though both computers are authorized under the same iTunes account.  It says that i have to authorize my macbook and sign into iTunes, but then says its already authorized.  How do I fix this?

    Hi stuartbonk,
    Welcome to the Support Communities!  Here are some steps you can try if you keep getting asked to authorize your MacBook for iTunes:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases - Apple Support
    http://support.apple.com/en-us/HT203160
    If you authorize your computer to play your iTunes Store purchases, but you can't play them and iTunes keeps prompting you to authorize, try these suggestions.
    Authorize your purchases from an administrator account
    To authorize your purchases from an administrator account, follow these steps:
    Log in to the administrator account.
    Note: If you don't have access to an administrator password, you'll need to contact the administrator of this computer. If this is a work computer, this may be your IT department.
    Make sure you have the latest version of iTunes installed. You can download the latest version free.
    Choose Store > Authorize Computer.
    Enter your iTunes account name and password.
    Note: If you have multiple accounts, you'll need to log in to the iTunes Store and authorize each account separately.
    Quit iTunes.
    After you've authorized your computer on your administrator account, you'll need to log out and log back in to the user account you'd like to play your purchases from. Once you're logged back in, simply open iTunes, select an iTunes Store purchase in your library, and click Play. The item should begin to play.Authorize using the correct account name
    The items you're trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
    Select a purchased song in your library and choose File > Get Info.
    Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you'll need to use when authorizing your computer to play this purchase.
    Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
    If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
    If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.Remove the SC Info folderIf you're still unable to authorize your computer to play your purchases, you may be able to resolve your issue by removing the "SC Info" folder. To do so, follow these steps:
    OS X
    Quit iTunes and any other open applications until only Finder is open.
    Choose Go > Go to Folder.
    Type /Users/Shared/SC Info and click Go.
    If Finder is not already set to column view, set it by choosing View > as Columns.
    Select the SC Info folder and move it to the Trash by choosing File > Move to Trash.
    Restart the computer and open iTunes.
    Authorize your computer to play your purchases. Note: If you have multiple accounts you'll need to authorize your computer for each account. For more information on how to authorize your computer, see this article.
    Last Modified: Dec 16, 2014
    I hope this information helps ....
    - Judy

  • Stuck pinwheel/beachball and other coinciding issues

    I've recently run into a major problem on my 2006 Macbook Pro.  Soon upon booting to the desktop in Snow Leopard, the mouse icon changes to the spinning pinwheel/beachball as if waiting on a process to complete.  I can open programs from the task panel, such as Office or the calendar, but the pointer icon remains stuck as a pinwheel.  I am unable to open any drop-down menus from the top such as Finder, and can't get Force Quit to open.  Additionally, the Snow Leopard partition of the computer seems to be unable to establish an internet connection.  There is a list of the usual networks detected, however trying to connect under each one yields a "little or no connectivity" alert.  Oddly though the other partition on my computer (Windows 7) has no issues with connecting, as I typed this question out using the same computer under Windows.  Finally, I cannot get the computer to shut down in Snow Leopard, neither by going to Finder nor by tapping the power button, and I have to hold down the power button to do so.

    If you want to replace your battery you can get one fairly cheap on eBay http://www.ebay.com/sch/i.html?_nkw=aluminum+macbook++battery+A1280&_sacat=0&_od kw=aluminum+macbook++battery+A1278&_sop=12&_osacat=0
    Or for $129 from Apple http://store.apple.com/us/product/MB771LL/A/rechargeable-battery-13-inch-macbook -aluminum
    MacBook (13-inch, Aluminum, Late 2008)
    Removing the battery:
    Shut down the computer. Disconnect any cords connected to the computer.
    Turn the computer over.
    Locate the access door latch.
    Push down to release the latch, this sets it in the open position, and remove the access door that covers the battery.    
    With the latch still in its open position, gently pull up on the battery tab to remove the battery.
    Note: The latch must be in its released, open position to remove or replace the battery and access door.
    Installing the battery:
    To replace the battery, make sure the latch is in its open position.
    Hold the battery at an angle and slide the lipped edge of the battery below the brackets on the outside edge of the battery bay. Gently press the battery down.
    To replace the access door:
    Line the access door up with the bottom case and the tabs in the battery bay.
    Lower the access door into place.
    Make sure it is level with the bottom case of your MacBook.
    Press the latch into place, so it is in the closed position.

Maybe you are looking for