Positioning css for IE11

I am removing all the Spry lists and changing to pure CSS for my drop-down lists.
I bought Project 7 software to do this on the recommendation of posts in this forum.
The horizontal list that starts with 'contact us' etc, is supposed to be located at the bottom of the vertical lists works fine on all browsers, but will not stay in place on IE11. It works just fine on my current index page (thanks to Nancy O).
http://www.country-gallery.com/
Any suggestions? I removed our photo and information about us to try and make it work easier, but no good! This is my experimental page.....
http://www.country-gallery.com/index3.html
Thank you!
Janet

Hi ____,
We have not received a phone call from you, not was a message left. We also do not see an email. The page itself is the problem, not the menu. You have several markup and CSS errors, as well as a failure to properly clear floats. This is common when using Adobe CSS tools. If you can find the time to actually contact us, we would be happy to help you debug your page. I ask that you do that because using this forum is about as pleasant as a root canal for me.
Our phone number is 330-650-3675
Our support information can be found on this page:
http://www.projectseven.com/support/index.htm
Also note that we do not accept email from Yahoo accounts for security reasons. If you have access only to Yahoo for email, you will need to telephone us or post on our Web forum:
http://www.pviiforums.com/
Al Sparber - PVII
The Finest Dreamweaver Menus | Galleries | Widgets
Since 1998

Similar Messages

New SpryWidget .CSS for a New Page

I have the whole spry arsenal of files on a website in a separate folder. I am already using several widgets and functions from that and among others also a "spry collapsible panel" widget on one of the pages.
Now, I would like to use it once again on a new page (on the same site), but when I insert the widget it gives me the same SpryCollapsiblePanel.css as the one already used for the previous widget. But I want to give the panel a different look and feel as it has some other purpose on the new page.
What is the correct procedure to get a fresh untampered "SpryCollapsiblePanel.css" for the new widget on a new page?
Thank you!

I notice (finally got the page!) that the lowest element in the 'drop up' menu overlays the main menu title...a byproduct of needing perhaps one more item's height in margin-top negative pixels!
I suppose it is a small consolation, but IE 8 seems to be rendering the menus accurately, with the sub-submenus flying out relative to their own submenus.
The only workaround that comes to mind (for all the other browsers out there) is to set up new classes to apply to subsubmenus:
ul.MenuBarHorizontal ul    /*this is the usual markup; you can leave this in */
    margin-top:-177px;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 160px;
    position: absolute;
    left: -1000em;
/*add the following, to offset the top margin by multiples of the height of a single item */
ul.MenuBarHorizontal ul ul.three {margin-top: 90px;}
ul.MenuBarHorizontal ul ul.two {margin-top: 60px;}
ul.MenuBarHorizontal ul ul.one {margin-top: 30px;}
For instance, the Ladakh Treks subitems want to offset from the top 30px to align with their parent, Ladakh Treks, so I use the <ul class="one"> to drop that sublist 30px down from the top of the container.
<li><a tabindex="-1" href="http://www.artcraftemporium.com/preview_wildvent/treks.html" target="_blank" class="MenuBarItemSubmenu">Ladakh Treks</a>
      <ul class="one">
             <li><a tabindex="-1" href="http://www.artcraftemporium.com/preview_wildvent/stok_kangri_exp.html" target="_blank">Stok Kangri Expedition</a></li>
             <li><a tabindex="-1" href="http://www.artcraftemporium.com/preview_wildvent/markha1.html" target="_blank">Markha Valley</a></li>
        </ul>
</li>
This solution does not work in IE8, which had already worked the way you intended without monkeying around with the top margin. I don't know how it works in IE7.
I have not used conditional markup (I know there are people out there who have, and you could research it!), but one could attempt to put a conditional markup around those class definitions in the stylesheet that would not call on them when your site encounters IE8.
Beth

How Do I Use a SINGLE Custom CSS for My Project?

How do I set a single CSS for a project?
Currently, I have linked (I checked, they are actually linked) FM files. The project is Responsive HTML 5 Single Source Layout. It is set up this way:
Project Files
Each FM file has a folder that contains a CSS, an FPJ, any baggage (PNG, for example) and an HTM.
So, for my project, I have 31 such folders.
Above them is RHStyleMapping.css.
That's it
To map my project to a custom CSS, I did this:
1) Created the custom CSS (let's call it TheSingleCSS-sb01.css) and put it in the same location as RHStyleMapping.css.
2) Right-clicked Responsive HTML5 (Primary Layout) in the Single Source Layouts pane.
3) Selected Properties. The Responsive HTML5 Properties dialog box opens.
4) Click Content, select the Apply to all Topics check box, select CSS, and choose my CSS, TheSingleCSS-sb01.css.
5) Click Save and Generate. Generating happens.
6) When prompted, click View Result.
7) Double-click one of the resulting topics, and choose the HTML tab.
8) Notice the following CSS files are referenced, NOT the one I want:
<link rel="stylesheet" href="Configuration_ChangeWorkflow.css" type="text/css" />
<link rel="stylesheet" href="..\..\RHStyleMapping.css" type="text/css" />
<image>
So:
1) How can I replace 32 individual CSSes with one single custom CSS?
2) Also note that Project Manager does not display my custom CSS, even though it is in the same location as RHStyleMapping.css and referenced in the Properties dialog box.
Thanks all,
Sean

Hi, so as I mentioned before, I have used Apply to all and this doesn't work. The resulting HTML still uses a specific CSS for that one HTML file.
1) I put the CSS I want to use, Sean01.css, in the top level of my project using Windows Explorer.
2) I Save and Generate.
3) But, my settings for styles in the CSS are not used. For example, FM_GlossaryDefinition is defined with a 0 left indent but actually uses a 144pt indent (that mirrors the print FM document and that I do not want).
4) And, you can see from the actual HTML, that the Sean01.css file that I applied to all topics (see the first image) is not referenced. What am I doing wrong?
What am I doing wrong? Again, these are imported FM files; this is not linked.
Thanks,
Sean

Trying to dynamically load CSS for project at compile time via config XML file to select CSS file.

I'm using the same code base to compile different versions of a project. Each project has different base fonts. I've created multiple css files that use the same style names. The idea being that in the code I reference the style names, then the loaded CSS determines which font (and size, color, etc) is used for each style name.
The CSS files are compiling to SWFs, and those SWFs are referenced in config.xml files. Before compiling, I select the config file to use.
I am loading the CSS SWF files via the StyleManager in the Application.mxml, like so:
styleManager.loadStyleDeclarations( _contentData.elements( 'cssPath' ).@path )
The path traces out correctly as:
assets_embed/styles/project2.swf
For some reasone I must include an fx:Style line in the Application.mxml file or no fonts are recognized. Example:
<fx:Style source="assets_embed/styles/project1.css"/>
If I reference the css for project one (as done above) then most, but not all, styles work. Some styles reference the fonts from the project 1 css, others properly use fonts from project 2 swf. If I point to the CSS for the project I'm compiling in the <fx:Style > tag then all fonts work, but that defeats the goal of using XML rather than code to identify the styles.
So, why do I need the fx:Style line if the css is being loaded via StyleManager?
Why is there "cross talk" between style definitions?
Is there a better way to select styles at compile time?

I read this quickly so I might have missed a detail. I think your describing an issue with recent Flex releases that is described in the fine print somewhere. If you don't have any fonts embedded in the main app and are only bringing in fonts embedded in CSS SWFs, you have to force-link the EmbeddedFontRegistry by adding something like this to the main app's script block.
import mx.core.EmbeddedFontRegistry; EmbeddedFontRegistry;
(Yes, "EmbeddedFontRegistry" is in there twice, once to define the fully qualified name, the other to create a class dependency to force the linking).

Time evaluation error "Error while positioning ABWKONTI" for leave entitlem

We are currently running on SAP ECC5. Time evaluation is run with schema TQTA everymonth to create leave quotas in info type 2006.
I am experiencing a time evaluation error "Error while positioning ABWKONTI" for one employee when running TQTA.
This employee was engaged on 14/08/2006. When I checked the logged changes per infotype, I found that a record for 14/07/2006 was deleted. I did check all the infotypes and all is reflecting the correct start date. I would really appreciate if someone can tell me how to fix this problem. Currently the leave entitlements are being processed manually. Please see below the error I am receiving:-
Log: Time Evaluation
4 General data
Successful personnel numbers
Personnel numbers with errors
Personnel numbers ended early
5 Personnel Numbers Rejected
5 00408765 Van Wyk Werner
U Error while positioning ABWKONTI
13A200608 0002006081320060714###%##
Quota could not be positioned:
2006 08 2006.07.14 2006.08.13
Relative day in period: 13 200706
Quota used/quota entitlement to be accounted: 1.25000
Person rejected: 00408765
Messages
5 Statistics
Selected personnel numbers 1
Successful runs for 0
including with errors 0
Processing not completed for 0
Rejected 1
Total number of messages and error messages 1

Hi,
Which Function Ur using for TQTR, Check That other wise P2006 Function Used.
I think the error is in ur PCR.
First u Understand the business process then write the PCR.
Send ur pcr what u had written.
also send ur Business senerio.like Conditions........

TPM_MIGRATION No position exists for the selected criteria Msg no. TRQ0020

Hello Experts.
I'm facing a error when execute the STEP B06 in TPM_MIGRATION Transaction, the message was:
No position exists for the selected criteria
Message no. TRQ0020
Diagnosis
This is the position that is characterized by the following details:
CC=1020;PT=V4I;SA=DEPBCCR;SE=1000013
When I look the Security ID number in the old system, the Document is obsolete, but the migration transaction seek the FLOW information for this ID number and not return any information.
Thanks for you help.
Regards.
Edited by: k3n_rao on Mar 31, 2011 7:32 PM

Hi Lorenz,
Thank you very much for the answer, My colleague, the one who posted the threat is not longer available, he went on hollydays.
We did check TPM12 & TPM13 and the reports said:
TPM12 : "no positions selected"
TPM13: "No flows found"
Just to double check that we have understood, which "Migration date" are you reffering to?
thank you very much
best regards,

People picker is not working for ie11 but working fine for other lower version

i am using sharepoint 2010 and windows authentication
recently i have updated my ie to ie11 and problem goes here.
when i try to select from people picker, there are an unexpected error happened
however when i use other ie version, people picker work fine, what goes wrong?
i have already added my system as trusted site
if there any others thing i miss out?

Hi,
According to your post, my understanding is that People picker is not working for ie11 but working fine for other lower version.
IE 11 is known to have compatibility issues on SharePoint 2010, please make sure to:
first of all, try installing latest update for IE 11 (several compatibility issues were fixed since the first release)
add the site to compatibility view (in IE> Tools> Compatibility view settings> type site name> add)
add the site to trusted sites and set the zone security level to low (in IE> Internet Options> Security> trusted sites> sites>add your site there> ok> custom level> select low> reset> ok)
You can use developer tools (f12) and set browser mode to the version that is most compatible with your environment.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Java Swing/AWT and FX is so old school! Give me HTML and CSS for GUI!

Dear Java,
I am a seasoned programmer and I feel it's time JAVA implements a GUI system where it uses HTML and CSS for the GUI. For the love of god just look at the interfaces you can make using HTML and CSS alone. I am a big fan of Java Swing and the recent GUI designer for FX is quite cool. But they are just not as simple as HTML and CSS. And JavaFX has some interesting requirements for the graphics.
I know it is possible to use JavaFX and implement the WebView/WebDriver and make it load a HTML page, etc... but why go through all the trouble?
Just imagine... if you make Java where it has powerful back-end to do what it does best and the HTML/CSS powered GUI on the front-end. It will make the lives of many developers much much easier.
I am not sure whether a Swing designed GUI will be faster than a HTML designed GUI... but if you look at a traditional browser and how fast it renders HTML/CSS, I am sure if Java had a native Form where it uses HTML and CSS to render the GUI, Java will make the dreams of many programmers a reality.
Make it happen!!!!

Check this i solve problem just now using this
https://wiki.archlinux.org/index.php/Ja … ow_Manager

Deleted CSS for Horizontal Menu Bar. Help!

I deleted the css for my spry horizontal menu bar and now when I try to upload it into a new page it is distored. I added back the css rules for the menu bar and it helped but I cannot get the menu bar to line up horizontally like it was originally. The bars are vertically staggered across the page. Can anyone help me with the css settings to get the menu bar back to normal?
Thank you
Teresa

Hello Teresa,
we should not resign ourselves. I for my part, I'm very "happy" with my DW, particularly you/we find here many unselfish helpers! What concerns your "way to build website an easier way" I'll propose DW itself (see screenshot of my German DW):
or many of interesting templates (Google is your friend) and here my favorite are these of Nancy O.:
http://alt-web.com/Free-CSS-Templates.shtml.
And I want to reoeat my hints from above:
If you have a budget to work with, look at PVII's Pop-Menu Magic3.
http://www.projectseven.com/products/menusystems/pmm3/index.htm
jQuery Superfish (free): http://users.tpg.com.au/j_birch/plugins/superfish/ aso.
Good luck!
Hans-Günter
P.S.
And whether you use DW or other programs, sooner or later you have to become familiar with CSS and html aso.

CSS for Dynamically Loaded External Text

I'm externally loading text from a .txt file. I need to format that file using CSS. I've got the CSS file set up and everything. I've tried every tutorial I can find to try and load the CSS, but nothing is working.
Here is the script for loading the text:
var textLoader:URLLoader = new URLLoader();
var textReq:URLRequest = new URLRequest("content_files/commissions.txt");
textLoader.load(textReq);
textLoader.addEventListener(Event.COMPLETE, textLoadComplete);
function textLoadComplete(event:Event):void
    commissionscontent.htmlText = textLoader.data;
    commissionscontent.htmlText = textLoader.data.split("\r\n").join("\n");
        if (commissionscontent.maxScrollV <= 1){
        scrollBox_mc.visible = false;
        scrollLine.visible = false;
    else {scrollBox_mc.visible = true;
          scrollLine.visible = true;}
Can anyone help me to load the CSS for this?? I'm really new to Flash and have just been teaching myself, except for now I've hit a wall and I am so incredibly frustrated that it's not even funny.

var css_loader:URLLoader = new URLLoader();
var textLoader:URLLoader = new URLLoader();
var my_css:StyleSheet = new StyleSheet();
var my_txt:TextField = new TextField();
css_loader.load(new URLRequest("style.css"));
css_loader.addEventListener(Event.COMPLETE, onCSSComplete);
function onCSSComplete(e:Event):void {
    my_css.parseCSS(e.target.data);
    textLoader.load(new URLRequest("commissions.txt"));
textLoader.addEventListener(Event.COMPLETE, textLoadComplete);
function textLoadComplete(e:Event):void {
    my_txt.styleSheet=my_css;
    my_txt.htmlText=e.target.data;
    addChild(my_txt);
    my_txt.width=300;
    my_txt.autoSize=TextFieldAutoSize.LEFT;
    my_txt.wordWrap=true;

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. How do I resolve this issue?

I just updated my Firefox browser to Firefox 8. I am a college student and practice with HTML and CSS for class assignments. The fonts in all my html documents are being overwritten online by your script typeface. I did not have this issue in the older version. I use an iMAC running OS10.6.8. How do I resolve this issue?

Starting with this, you have errors in your CSS code.
body {
margin-top: 0px;
margin-right: 0px;
margin-bottom: 0px;
margin-left: 0px;
color: 151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: EFF5F8;
body {
margin:0;
color: #151515;
font-family: "Gill Sans", "Gill Sans MT", "Myriad Pro", "DejaVu Sans Condensed", Helvetica, Arial, sans-serif;
background-color: #EFF5F8;
font-size: 100%;
Related links:
Windows Chrome, why do my fonts look so bad? - Lee Green
css3 - Bad font rendering Chrome - Stack Overflow
Nancy O.

Using CSS for Struts JSP presentation using tiles

hi all,
i want to use CSS instead of table TRs ,TDs,TABLE in my jsps.
can anyone help me how can i achieve that?
i want to use css with struts presentation using tiles
i couldn't find much information about using CSS for jsps on the web can anyone guide me with proper information in this regard?
regards and thanks in advance

Actually, I just realized it's the exact same syntax as regular html (which I was thinking, but for some reason it didn't work the night I posted):
<head>
<link rel="stylesheet" href="yourstylesheet.css"/>
</head>I'm not sure why it didn't work for me the first time.
theAmerican

I have no idea how I did this on my ipad but everything on my screen is in negative view. How do I switch it back to positive or for me , normal view?

I have no idea how I did this on my new ipad 2 but everything on my screen is in negative view. How do I switch it back to positive or for me , normal view?
Thanks, joney

Yes, you probably have the tripple-click Home button option off.
Just visit the Accessibility pane under General settings (as described by King_Penguin above) and choose to assign what you need for your tripple click command, in this case toggling the black & white option.
You can also tell it to 'ask' you what you want from that command each time.
Hope this helps.

How can I get the position stream for a composition?

I am writing an AEGP plugin for AfterFx and I need to get the position stream for a composition. I have based my plugin on ProjDumper.
Can anyone help?

Hi Shachar,
Many thanks, that goes some way to explain it.
However I am creating a composition adding text layers to it and animating the positions of the individual text layers. Then I create a second composition and include the first as a nested composition and I animate the position of the first composition within the second composition.
When I run my plugin I only see the animations I added to the individual text layers, they are not combined with the overall animation attached to the first compisition within the second composition. The animation data for the first composition must be stored somewhere. Do you know where ?
I have been looking at source items and markers neither seem to provide the information I am interested in. Any clues would be very helpful.
Thanks in advance.

Changing CSS for form field elements?

Hi,
Is there a way we can change the CSS for Form text fields in APEX 4.1 so that they look a little better? Or is the .css file located somewhere where we can just go and change?
Thanks,
Sun

Hi,
If you are referring to changing the CSS properties then you can do that.
Add /override styles to the page item's HTML Form Element Attributes
style="<cssproperty1>:<value1>;<cssproperty2>:<value2>;"
e.g.
style="background-color:red;color:yellow;"Red/yellow is certainly not "looking better", the idea is to give you the direction.
If you know the class of the item(s) then you can change the styles by overriding the built-in style of the template by adding the <style> in the Page HTML
Header as well.
Or, define your own class, add the class to the HTML Form Element Attributes field and adding the style in the Page HTML Header.
regards,

Positioning css for IE11

Similar Messages

Maybe you are looking for