Possibility that a check/ authorization on Pricing Date - Sales Order

Is there any possibility that a check/ authorization on Pricing Date can be implemented at Sales Order Level.
Regards,

Hi
You cant use authorizations in relation to the pricing date.
I dont know which kind of check you want to make but of course user-exits like mv45afzz is always an option.
Kind regards
Søren Nielsen

Similar Messages

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

Custom program for availability check and update for existing sale order at Item level(VA02)

Hi,
I came to know Bapi_Saleorder_Simulate can be used for availability check and update an existing sale order.but there is no sample program explaining the process.I have tried this by passing parameters ORDER_HEADER_IN , ORDER_ITEMS_IN ,ORDER_PARTNERS and ORDER_SCHEDULE_EX(for getting details),also i have assigned the sale document number ,custom document type(ZSO) in ORDER_HEADER_IN . while executing the BAPI I am getting the error external number range is not assigned for the document type ZSO . I am confused on seeing this error. It is possible to do availability check for existing sale order using this BAPI. Please explain how to achieve this.It will be really helpful if it is expalained with an example.
Regards,
Shanmuga

Hello, I think you may have been misinformed about this BAPI updating a sales order at item level. As far as I understand it this BAPI can be used to simulate the creation of a sales order which obviously would include and ATP check. This is why it is giving the error because it is simulating creation but you are entering a value in a field that should be automatically generated (i.e. the sales order number). For change the sales order at item level have you looked at BAPI_SALESORDER_CHANGE? I pretty sure this BAPI both updates sales order (header or item level) and can do an ATP first.
Points are always welcome if you feel an answer has been helpful.

Re-Pricing on sales order

Hello All,
How can I redetermine pricing for a change in item partner. The user exit USEREXIT_NEW_PRICING_VBAP or USEREXIT_NEW_PRICING_VBKD does not have visibility to VBPA table...
Thanks,
Sunny.

But, the exception to that is the service render date should be of w.r.t. new tax values
& this will be determine from delivery doc date.
case1. could you please elaborate the above point?
why delivery doc date shall determine the tax value? is it not the pricing date and the validity period of the condition type in the condition record that determine the values?
Business scenario with different pricing procedures - sales order & billing doc.
this "concept" (of diff pps) is still not clear.
1. From a business process perspective, why shall I tell my customer, via my sales order that the price = 100EUR and bill him another price, e.g. = 90EUR?
moreover, if finally i want to give my customer at a reduced price, then i would tell him this upfront (during the creation of s.o.) as this is to my advantage.
2. "Gross Price, Taxes, Discount, Rebate, Freight, Frieght related Insurance charges, Handling charges, etc." All these condition types I can have in one pp and then with requirements; e.g. in the case of Rebate condition types requirement =24,25; in standard functionality; activate or deactivate when required. Thus why do I need 2 pps, as you have suggested in this example?
other examples are welcome!
many thanks, in advance!

Back Calculation in Pricing for Sales Order.

Hello friends,
Please help me out with this below mentioned problem in the Pricing for Sales order.
I am creating a Contract with Customer and Plant from the same Region (State), while creating the subsequent Sale order I want to use the plant of some other Region which is different from the contract. In this case the pricing will change as there will be different Taxes (%) that would be applicable for different Region.
Now the requirement is that we want to use the Final Selling price which is calculated in the contract, therefore by keeping the Selling Price Fixed we have to backtrack and calculate new pricing accordingly.
An example for the same is explained below:
When Both Customer and Plant are from same Region:
     Particulars                        %           Value
A     Basic Value                                       100000
B     ED                     10.30%           10300
     Sum total (A+B)                                 110300
C     VAT                        5%            5515
     Sale Price (ABC)                                 115815
When Customer and Plant are from different Regions:
     Particulars          %           Value
D     Basic Value (A-B-C)                  92105
C     ED                        10.30%            9487
     Sumtotal (A-B)                  101592
B     VAT                          14%            14223
A     Sale Price                                       115815
Please reply with possible solutions.
Thanks and Regards,
Edited by: Lakshmipathi on Oct 4, 2011 5:41 PM
Thread Locked - Reason Cross Posted

Hi Nitin,
Go through the bellow links you can resolve your problem.
Re: Reverse Calculation in Pricing Procedure
Reverse Pricing???

Activating Pricing for Sales Order in Retail

Hi All/Vijay/KK,
Please tell me how activate the pricing for sales order, actually in SD we do Pricing Determination, what has to be done for Retail pricing

Hi,
To do sales order pricing
Goto IMG>Sales & Distribution>Basic Functions>Pricing>Pricing Control
Either Follow Standard, condition type PR00
or in case of Custom
1. Use condition table 406 Site/article
2. Define Access Sequences ZPR0
Enter accesses:10 406 Site/article Exclusive x
3. Define Condition Types (ZPR0 assign newly defined access sequence)
4. Define And Assign Pricing Procedures (assign condition types ZPR0..etc. to it)
Then maintain condition record , go to VK11 --> Enter your Z condition type (eg. ZPR0)., enter the amounts.
Add the pricing procedure , to sales document type.
For Retail Sales Pricing
For Retail Sales Pricing based on Purchase pricing you can follow the following method:
The retail price is always based on the purchase net/net price. This purchase net price is built up from the purchasing pricing elements or condition types defined to be included in the purchase net price. A planned mark-up is applied to the purchase net/net to calculate the proposed retail price. The planned mark-up can be set by merchandise category and for exceptions, more specifically by article.
You can perform Two-step calculation for retail pricing, for example, for stores that are supplied by a distribution center (internal vendor). Calculating sales prices for the stores is based on the transfer price for distribution centers (preceding organizational unit).
1. Set up Master Data (WB02) - Relevant Fields should be maintained
2. Set up Article Master Data - Logistics DC and Store View (MM42)
Relevant Fields should be maintained
3. Maintain Mark up for DC(VK11) -Markup % at Distribution channel distribution chain level
Mark ups maintained at two levels:
For DC: At distribution chain level
Condition type used: AUFS
For Stores: At article level
New condition type ZUFS created.
4. Maintain Mark up for Stores (VK11) Markup % at Store distribution chain level
5 Create Pricing Procedures (IMG) -Pricing Procedures created
6. Carry out Price calculation for DC(VKP5) - Pricing Document created - DC Transfer price calculated
7. Carry out Price calculation for Stores (VKP5) - Pricing Document created - Final Retail Price Calculated
The final retail price that is calculated is stored in the condition type VKP0.
Hope it helps,
Regards,
Anirban Roy

Duplication Check for P.O at Sales Order level

Dear Gurus,
As per my clients requirement we have configured the system to give an error message when an existing P.O number is entered in the Sales Order screen.It works fine.But we are having a problem that whenever we change anything in the Sales order it doesn't allow us to save our sales order for the second time and gives the error that 'P.O number exists'
Do anyone have solution for this?
Advance Thanks.
Regards,
Ravi

Hello,
Kindly seek the help of ABAPer in this case because during the saving of the Sales order the error related to Purchase order
number is thrown even though you are editing the PO field in the Sales order. One more check you should carry before saving
the sales order --> ensure that you have entered a new purchase order.
Regards,
Sarthak

Inquiry Number,Inquiry Date,Quotation No,Quotation Date,Sales order No

Hi ALL,
Please let me know from which SD cubes can we get data relation to these fields
Inquiry Number,Inquiry Date,Quotation No,Quotation Date,Sales order No,Sales order Number,.
Or do we need to enhance these field .
Regards

hi,
We can link enquiry, quotation & sales order through the document type there is a field -
Reference mandatory in that you entered the link
Thanks
naresh

User-exit for carry out new pricing while sales order save automatically

Hi all,
I need to carry out new pricing while sales order save automatically. Please any one help me to finding proper user-exit to achieve my requirement.
Thanking You.
Moderator message: please search for available information.
Edited by: Thomas Zloch on Jan 11, 2012 12:53 PM

Pl help.

How/ where to check output type while saving sales order for confirmation

Hi All,
Could you anyone pls let me know How/ where to check output type while saving sales order for confirmation.
Present scenario : when the Sales Order is created the Order confirmation is sent irrespective of credit block of the sales order.
Requirement : Order confirmation ZA00 sent to the partner only for those Sales orders which does not have credit block and ZCLE sent to the partner if the order has credit block.
Now i want to know where exactly to check the output types "ZA00" and 'ZCLE' based on the credit block to send the confirmation to partener.
Quick help highly appreciated......
Preetham

Hi Santosh,
Thanks for the info. But here in this case I have to send the confiramation based on credit limit check. If credit limit check exceeds "ZCLE' should go as confirmation else 'ZA00' should go as confirmation.
Where can we check the credit limit whether it exceeded or not. My doubt is whether it is config issue or do we need to write code user exit or routine to send the specific output type for confirmation.
Thanks & Regards,
Preetham

To check whether searchterm maintained for sales order

hi ,
i have to generate one alv report to check whether searchterm maintained for sales order or not...
can any one help me on this...
thanks.

Hi,
The field VBAK-KTEXT can be of use to you.Refer tables :VBAK and VBAP.

Is Credit Check Per Line Item in Sales Order Possible?

Dear All,
Hope you all are doing well !!!
Infact i am currently implementing OPM and SCM modules for a CSD (carbonated soft drinks) industry. They have a specific requirement on Credit Management. Please look at the Requirement Below.
Credit Management Per Line on SO
Client Charges Distributors for both Liquids (Finished Product) + [Return Glass Bottles and Shells) for the First Time.
Subsequently while returning RGB(Return Glass Bottles)'s and Shell's are being given Credit memos.
CBL gives credit only on Bottles & shells but not on Liquids.
For Liquids CBL takes the Prepayment & Its Compulsory.
So the Credit limit needs to be check on the bottles and shells only.
Oracle E-Business Suite Credit Management does not work per line item for a
Particular Sales Order. It works on total Sales Order. as this is not a standard Process in Oracle how we can achieve this without customization.
Please suggest me through any workaround we can achieve this and its a show stopper for us and business critical for my client.Please help me on this regard.
Thanks & Regards,
Aditya

I'd suggest writing your own might be easier. Oracle buckets the exposure as per the list below whereas you are probably only interested in seeing a total order exposure (by line item for bottles/shells) and total AR exposure summary.
Also the standard report will look at the unit sell * the ordered quantity in calculating transaction amounts on open orders which is your problem. If I've understood your requirement correctly, you only want to consider the shells and bottles in the credit check because you enforce prepayment for liquids so presumably your AR o/s balances are only for money owing on shells and bottles.
In that case, your only real issue is at the order entry stage (again because Oracle will be considering the total transaction value if you're using the standard automated credit check) which is why I suggested the manual workaround there.
1     Header uninvoiced orders
2     Header uninvoiced orders tax
3     Line uninvoiced orders
4     Line uninvoiced orders tax
5     Line uninvoiced freight
6     Header uninvoiced freight
7     Header and line freight
8     Invoices
9     Payments at risk
10     Order holds
11     Line holds
13     Order tax holds
14     Line tax holds
15     Order freight holds
16     Line freight holds
17     Header and line freight holds
18     External exposure
21     G_BR_INVOICES
22     G_BR_PAYMENTS_AT_RISK
23     G_HEAD_RETURN_UNINV_ORDERS
24     G_LINE_RETURN_UNINV_ORDERS
25     G_ORDER_RETURN_HOLDS
30     G_ORDER_RETURN_HOLDS
31     G_LINE_RETURN_HOLDS

Credit Check Per Line Item in Sales Order is Possible?

Dear All,
Hope you all are doing well !!!
Infact i am currently implementing OPM and SCM modules for a CSD (carbonated soft drinks) industry. They have a specific requirement on Credit Management. Please look at the Requirement Below.
Credit Management Per Line on SO
Client Charges Distributors for both Liquids (Finished Product) + [Return Glass Bottles and Shells) for the First Time.
Subsequently while returning RGB(Return Glass Bottles)'s and Shell's are being given Credit memos.
CBL gives credit only on Bottles & shells but not on Liquids.
For Liquids CBL takes the Prepayment & Its Compulsory.
So the Credit limit needs to be check on the bottles and shells only.
Oracle E-Business Suite Credit Management does not work per line item for a
Particular Sales Order. It works on total Sales Order. as this is not a standard Process in Oracle how we can achieve this without customization.
Please suggest me through any workaround we can achieve this and its a show stopper for us and business critical for my client.Please help me on this regard.
Thanks & Regards,
Aditya

I'd suggest writing your own might be easier. Oracle buckets the exposure as per the list below whereas you are probably only interested in seeing a total order exposure (by line item for bottles/shells) and total AR exposure summary.
Also the standard report will look at the unit sell * the ordered quantity in calculating transaction amounts on open orders which is your problem. If I've understood your requirement correctly, you only want to consider the shells and bottles in the credit check because you enforce prepayment for liquids so presumably your AR o/s balances are only for money owing on shells and bottles.
In that case, your only real issue is at the order entry stage (again because Oracle will be considering the total transaction value if you're using the standard automated credit check) which is why I suggested the manual workaround there.
1     Header uninvoiced orders
2     Header uninvoiced orders tax
3     Line uninvoiced orders
4     Line uninvoiced orders tax
5     Line uninvoiced freight
6     Header uninvoiced freight
7     Header and line freight
8     Invoices
9     Payments at risk
10     Order holds
11     Line holds
13     Order tax holds
14     Line tax holds
15     Order freight holds
16     Line freight holds
17     Header and line freight holds
18     External exposure
21     G_BR_INVOICES
22     G_BR_PAYMENTS_AT_RISK
23     G_HEAD_RETURN_UNINV_ORDERS
24     G_LINE_RETURN_UNINV_ORDERS
25     G_ORDER_RETURN_HOLDS
30     G_ORDER_RETURN_HOLDS
31     G_LINE_RETURN_HOLDS

Changing the Availability Check key in an existent Sales Order line

Hello gurus.
Is it possible to modify the Availability Check key (VBAP-MTVFP) of a material in an existent Sales Order line?
I changed it in the material master, but since documents are not automatically updated, I wanted to modify this value in an existing sales order line. I am not even able to find the field in it.
I had to delete the order line and create it again, but then I have troubles getting the exact same confirmed date that I had before.
Any help? Thank you.

You cant see at item level. To see in sale order, click from top menu bar, Environment -- Availability. Now you can see the availability check on top of the screen.
Meanwhile, I dont think, this field will be in editable mode once partial delivery is made in which case, LSMW also wont help you.
If your requirement is desperate to change the availability check, to me the available option is close the existing sale orders, create fresh orders after changing the availability check in material master. On the other hand, if you want to change only in sale order, then the option is LSMW as you cant even succeeed in TCode MASS
thanks
G. Lakshmipathi

Dynamic Credit check - problem -Delivery creation from Sales order

Hi
we have a problem which i would appreciate some help with.
Sales order is blocked for credit and subsequently released via VKM1
BUT as soon as line item is selected and then Sales document > deliver -
the Dynamic credit block kicks in again straight away, no other changes have been made
why is this occurring ?
I managed to get round the problem by creating delivery via VL10c and selecting line item and then create in background

Hi Tony,
Do you have a credit check active again at Delivery level?
In OVA8 - for the combination of credit control area, risk cat & credit group - please check field 'Number of days'.
If you do not wish to carry out the credit check again for the released doc, here you can maintain the number of days.
Description of F1 for this field is as below.
Credit check: Number of days without check
Specifies the number of days after which a changed document must be re-checked for credit.
Use
This function is used for checking documents that have already been released by a credit representative, but that have subsequently been changed. The system does NOT carry out another credit check if the following conditions are met:
The value of the changed order is not greater than the value already approved for credit (inclusive of the deviation factor), AND
The current date is not greater than the original release date plus the number of days specified here
thanks
Anirudh

Possibility that a check/ authorization on Pricing Date - Sales Order

Similar Messages

Maybe you are looking for