Possible to modify the FLVplayback fullscreen message?

Hi,
When you press the FullScreen button in an AS3 FLVplayback
object it pops up a message about hitting the ESC key to exit
fullscreen mocde. It is large and centered, and takes a long time
to fade away.
Is there any way to modify this? Maybe make it smaller and
not in the center? Or shorten how long before it fades out?
I'm trying to make a player that will be used by a live
internet TV station who will switch between a live announcer and
the FLV player. Right now they have to click "Play" then click
"Fullscreen" then switch the studio's video feed over to the
FLVplayer. Then they end up broadcasting that stupid message for
several seconds on top of the video playback before it fades away.
They can't switch to fullscreen ahead of time, because the player
ignores key presses so there is no way that I can see for them to
go to fullscreen first, wait for the message to go away, and then
start playback as they switch the video feed to the player.
Can anybody tell me if there's a way to modify that message?
Or a way to start playback AFTER going to fullscreen mode and
waiting for the message to go away?

No, there is no supported way to modify this dialog box.  If you submit feedback on Connect and post a link here, I'd definitely vote it up.
http://myitforum.com/myitforumwp/2013/12/02/giving-feedback-on-microsoft-connect-for-configmgr-2012-help-yourself-help-the-community/
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Similar Messages

  • Possible to modify the message clients receive when updates are ready to install?

    An upper-up wants the message clients see when updates are ready for installation changed. They want the "Software changes must be applied to your computer after [date]" changed to something else. Is this possible? (See the image below)

    No, there is no supported way to modify this dialog box.  If you submit feedback on Connect and post a link here, I'd definitely vote it up.
    http://myitforum.com/myitforumwp/2013/12/02/giving-feedback-on-microsoft-connect-for-configmgr-2012-help-yourself-help-the-community/
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • Is it possible to change the Global Lockout Message to include the time duration?

    Hi Everyone,
    Is it possible to edit the error messages that portal returns?
    Are they stored in a table we can just modify? Or are they
    secured?
    The one specifically that a client would like to change is:
    the error message related to the global lockout message to
    include the time that people would have to wait.
    Any ideas?
    Thanks
    tim

    Tim,
    You can change the message via an API. The code that we used is
    below:
    DECLARE
    CURSOR c_id IS
    SELECT id
    FROM wwnls_strings$
    WHERE name = 'edit_password_txt';
    v_msg LONG := 'Enter your old password and a new password.
    Confirm your new password to make sure you entered it correctly.
    Passwords are %1.'||chr(10)
    ||'Passwords must : <br>' ||chr(10)
    ||'<UL><LI> be at least 7 characters long
    </LI>' || chr(10)
    ||'<LI> not be the same as your username </LI>'
    || chr(10)
    ||'<LI> contain at least one alpha character
    </LI>' || chr(10)
    ||'<LI> contain at least one numeric character
    </LI>' || chr(10)
    ||'<LI> not be the same as your previous
    password </LI></UL>' ;
    v_id wwnls_strings$.id%TYPE;
    BEGIN
    OPEN c_id;
    FETCH c_id INTO v_id;
    CLOSE c_id;
    portal30_sso.wwnls_api.set_string      (p_id => v_id
                             ,p_text => v_msg
                             ,p_language => 'us');
    END;
    /

  • Is it possible to modify the system colour palette?

    I'm trying to remove (or at least minimise the visual impact of) the grey border present when a subVI smaller in size than the main VI (or screen in general) is run. The subVI is run as modal with all dialog borders/buttons turned off. As far as I can see there are two options for this as LV will not natively allow this bordered to be turned off:
    1 - using Windows APIs create a mask to cover the border - time consuming and not overly robust as I may need to move panels around
    2 - change the colour from grey to a more suitable colour to match my theme - as far as I can tell the grey colour of the border is defined from within LV ( I've tried playing with the Windows colour scheme to no avail) and whilst a number of display colours can be modified, the fundamental LV system colours cannot.
    Any suggestions as to a solution will be greatly received.  
    OG
    Research Engineer - Doctor in training

    Yeah that won't really work for me as I need the modal-ness! The reason I believe the colour property to be defined by LV is that by modifying the Windows theme I'm able to have the border look as in the attached pic however as soon as I execute the VI again, the border reverts to the whitish-grey colour.
    OG
    Research Engineer - Doctor in training
    Attachments:
    VI_border_not_executing.JPG ‏93 KB

  • Is it possible to modify the media player in Office365?

    We have a modified document library where teaching staff upload assessment evidence and add Assessment Levels and Notes about the evidence. A lot of these files are movie files.When
    the user clicks on the Name field to play the movie file, I would like the Notes field to be displayed as well so that this information is available whilst the evidence is watched.
    Is this possible and if so how would I go about it?
    We are using the online Office365 for schools

    did you try assets library?
    http://office.microsoft.com/en-us/office365-sharepoint-online-enterprise-help/set-up-an-asset-library-to-store-image-audio-or-video-files-HA102785730.aspx
    also check this:
    http://blogs.office.com/2013/03/08/enhanced-video-experience-in-sharepoint-2013/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Is there any class that makes it possible to modify the content of a file?

    I am looking for a class in the APIs (preferably) that would make it possible to open up an existing file, and delete specific characters, insert characters at specific places and do things like that... Is there any such class?

    hmm, then would there be any way to reproduce the effect of the 'delete' or 'backspace' keys? If I'm right, I think there was an ASCII code for the backspace character... Would it be possible to insert it to get a character deleted!? :/
    I really need to find a way to do all of these operations on a text file because I think it wouldn't be a good idea to completely re-write 30Mb+ large files each time some data has to be modified :P

  • How can I remove the 'allow fullscreen' message which appears on my website's video's, & not just in my own browser?

    I have a website with videos hosted on Vimeo. When I click the 'fullscreen' button, the video goes into fullscreen but I am presented with a message asking to 'allow or deny fullscreen for vimeo.com'.
    I know I can stop this message in my own Firefox browser (click 'allow' and 'remember' for vimeo.com, or go to 'about:permissions' in Firefox address bar).
    But I want to stop other viewers to my website having to deal with this message, is there any css code/ workaround to stop this message appearing for other viewers, rather than each of them having to change their own browser preferences?
    Many Thanks

    That is standard behavior when websites use the full screen API and you click a button on a web page or in a media player.
    You can manage the full screen permission via "Tools > Page Info > Permissions" or via the about:permissions page.
    There is a pref (about:config) that controls the default behavior although it is not recommended to change the default.
    *full-screen-api.approval-required
    *https://developer.mozilla.org/en-US/Apps/Quickstart

  • Is it possible to modify the timeout of the userID on my active directory domain when off network?

    My work Macbook Pro is using a domain account from my office.  When I travel and the domain controller is not reachable it takes 30 to 60 secs longer to log into my system because it has to wait for the active directory domain controller search to timeout before it will use cached credentials (i.e. a mobile account).  Does anyone know how to modify my system settings to reduce the timeout or even eliminate the delay all together?  I am running the latest version of Yosemite. 
    Thanks,
    Mike

    Here is the modified VI, saved in LabVIEW 2012. Follow these steps to patch your system:
    1. Close LabVIEW 2012.
    2. Backup the following file: LabVIEW 2012\resource\Framework\Providers\VILibrary\libFra​me_OpenPageRef.vi
    3. Replace it with the version attached to this post.
    4. Restart LabVIEW 2012.
    Now you should no longer experience the 30 second timeout when the class property page loads. I set the timeout to "-1", so it should wait as long as necessary to open the page.
    Note that if you ever repair or reinstall LabVIEW 2012, you'll need to patch this file again. Also, I wouldn't try patching any version other than 2012, since there may be other changes made to this VI across LabVIEW upgrades.
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman
    Attachments:
    libFrame_OpenPageRef.vi ‏24 KB

  • Is it possible to modify the tag structure tree and the role map via scripting?

    We use unstructured FrameMaker to produce training materials which we distribute as tagged PDF to meet accessibility requirements.
    When FrameMaker creates a tagged PDF, it does a fairly good job of populating the structure based on the PDF setup information for the paragraph formats in the FrameMaker documents. However, there are some limitations in the support that FrameMaker provides. For example, almost all paragraphs are assigned to the P role even if they are headings and should be mapped to H1-H6.
    We want to be able to easily post-process a PDF that has been generated from FrameMaker to fix some of the tag structure issues (including tag names and the role map) so that the PDF will provide the optimum experience for a user of the JAWS screen reader.
    I spent some time reading the SDK documentation but didn't find much information about manipulating a tagged PDF via the API, especially via scripting.
    Does anyone have any examples or references which explain how to do it?

    AFAIK, it's not possible with a script. You might want to ask in the SDK forum, as it could be possible with a plugin.

  • Can we modify the standard AOL Message with custom Message in Seeded Page?

    Hi,
    I have a requirement to change AOL Message with custom Message in Seeded Page.
    In a seeded OAF page when a user clicks on a submit button a standard AOL Processing Message is populated.
    I Need to change the Standard Message and call Custom Message.
    Did controller extension and found that both the messages are populating.
    called the code after super and tried to call before super also.
    Did any one face this issue and resolved it. Kindly provide the solution.
    Regards
    Chaitanya

    Hi Gyan,
    I have tried by extending a sample custom controller.
    Below is the code of TestCO calling create message
      public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          if (pageContext.getParameter("Test") != null)
              OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM",    null,
              OAException.CONFIRMATION, null);
              pageContext.putDialogMessage(confirmMessage);
      }Then I extending the TestCO to XXTestCO and it is calling Update Message
        public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
          super.processFormRequest(pageContext, webBean);
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            if (pageContext.getParameter("Test") != null)
                OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
                OAException.CONFIRMATION, null);
                pageContext.putDialogMessage(confirmMessage);
        }got below Confirmation
    Confirmation
    Employee &EMP_NAME with the number &EMP_NUMBER has been created.
    Employee (&EMP_NAME) has been updated.
    Tried below approach also calling the message before super class
        public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            if (pageContext.getParameter("Test") != null)
                OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
                OAException.CONFIRMATION, null);
                pageContext.putDialogMessage(confirmMessage);
          super.processFormRequest(pageContext, webBean);
        }got below Confirmation
    Confirmation
    Employee (&EMP_NAME) has been updated.
    Employee &EMP_NAME with the number &EMP_NUMBER has been created.
    My requirement is to print only the message which I have kept in Extended controller i.e. Update message
    Regards,
    chaitanya

  • How it is possible to modify the layout 1-N01

    The only OSS note that deals with a change of 1-N01 is based on ABAP program changing table's content directly.  Is there any other way except for ABAP to copy and edit the layout used in KBK6?

    According to SAP it can not be modified and copied.  You can try to follow your recommendation yourself to confirm this.

  • HT203428 Is it possible to read the distorted text message that I received from someone?

    It was a message from the carrier T-Mobile to the carrier Airtel (which is the network I use). The message has imcomprehensible characters. Is there a way to read them, how do I change them to normal ASCII format?

    no, but there are 3rd party software solutions that can probably do this for you.   try google.

  • Is it possible to modify the Calendar object to only show working days?

    Is there a way to configure the Calendar selection, duration calculations, and notification dates in the system to only include working days (i.e. holidays and weekends are not counted and not available for selection)? This is particlular for Purchasing and Sourcing Modules.
    Thank you.

    This can be changed through registry:
    https://msdn.microsoft.com/en-us/library/ff800821%28v=ws.10%29.aspx
    You can do the change through group policy preferences, or some other method you prefer (ConfigMgr compliance settings for example).

  • Disable Approver Comment Dialog Box and modify the "Approve It" message

    Hello All. I have a two part question. The first one is: 1.) Can you change the
    Approve it wording to something else like Approve or Reject?
    The second quesiton is: 2.) Can you skip directly to the approval task form instead of having to enter in a comment that never shows in the Approval Dialog Box? I've included screens below of what I'm speaking of. Thanks!

    Hi,
    For this issue, I'm trying to involve someone familiar with this topic to further look at it.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
    Jason Guo
    TechNet Community Support

  • Re: Possible to modify the backlighting of individual keys on the keybord

    well this thread answers my question :(

    Quote from: bwfc0907 on Today at 06:41:59Not possible as this doesn&#39;t exist, only option in to reinstall Windows 10 and it won&#39;t activate.
    at this point i would ask MSI what are your option , you might ha...

Maybe you are looking for