Possible to remap 0 key from Services to Web?

Hello all,
I have a Nokia 5500 and recently discovered that if I hold down the 0 key (the one with an "i" in a circle on it), the phone launches the Services browser.
However, I much prefer the more powerful and more recent Web browser (both have a globe icon, which is confusing, but the Web browser allows you to navigate full web pages and is quicker to use). Any way to remap the key to launch Web instead?

No. Is like that.

Similar Messages

Is it possible to create foreign key from composite key in other table.

SQL> desc PRODUCT_CONFIG_OPTION;
Name Null? Type
CONFIG_ITEM_ID NOT NULL VARCHAR2(20) --composite primary key
CONFIG_OPTION_ID NOT NULL VARCHAR2(20) --composite primary key
CONFIG_OPTION_NAME VARCHAR2(100)
DESCRIPTION VARCHAR2(255)
SEQUENCE_NUM NUMBER(18)
LAST_UPDATED_STAMP TIMESTAMP(6)
LAST_UPDATED_TX_STAMP TIMESTAMP(6)
CREATED_STAMP TIMESTAMP(6)
CREATED_TX_STAMP TIMESTAMP(6)
SQL> DESC PRODUCT_CONFIG_ITEM;
Name Null? Type
CONFIG_ITEM_ID NOT NULL VARCHAR2(20)
CONFIG_ITEM_TYPE_ID VARCHAR2(20)
CONFIG_ITEM_NAME VARCHAR2(100)
DESCRIPTION VARCHAR2(255)
LONG_DESCRIPTION CLOB
IMAGE_URL VARCHAR2(255)
LAST_UPDATED_STAMP TIMESTAMP(6)
LAST_UPDATED_TX_STAMP TIMESTAMP(6)
CREATED_STAMP TIMESTAMP(6)
CREATED_TX_STAMP TIMESTAMP(6)
SQL> desc product;
Name Null? Type
PRODUCT_ID NOT NULL VARCHAR2(20)
PRODUCT_TYPE_ID VARCHAR2(20)
PRIMARY_PRODUCT_CATEGORY_ID VARCHAR2(20)
MANUFACTURER_PARTY_ID VARCHAR2(20)
FACILITY_ID VARCHAR2(20)
INTRODUCTION_DATE TIMESTAMP(6)
SUPPORT_DISCONTINUATION_DATE TIMESTAMP(6)
SALES_DISCONTINUATION_DATE TIMESTAMP(6)
SALES_DISC_WHEN_NOT_AVAIL CHAR(1)
INTERNAL_NAME VARCHAR2(255)
BRAND_NAME VARCHAR2(100)
COMMENTS VARCHAR2(255)
=========
CREATE TABLE PROD_CONFIG_PROD_CONFIG_OPTION (
PRODUCT_ID VARCHAR2(20),
CONFIG_ITEM_ID VARCHAR2(20),
CONFIG_OPTION_ID VARCHAR2(20),
PAGE_NUM_TO NUMBER(18),
ALTERNATE_PAGE_NUM_TO1 NUMBER(18),
ALTERNATE_PAGE_NUM_TO2 NUMBER(18),
ALTERNATE_PAGE_NUM_TO3 NUMBER(18),
LAST_UPDATED_STAMP TIMESTAMP(6),
LAST_UPDATED_TX_STAMP TIMESTAMP(6),
CREATED_STAMP TIMESTAMP(6),
CREATED_TX_STAMP TIMESTAMP(6),
CONSTRAINT PK_PROD_CAT_CONFIG_MOD PRIMARY KEY (PRODUCT_ID),
CONSTRAINT FK_PRODUCT_ID FOREIGN KEY (PRODUCT_ID) REFERENCES PRODUCT(PRODUCT_ID),
CONSTRAINT FK_CONFIG_ITEM_ID FOREIGN KEY (CONFIG_ITEM_ID) REFERENCES PRODUCT_CONFIG_ITEM(CONFIG_ITEM_ID),
CONSTRAINT FK_CONFIG_OPTION_ID FOREIGN KEY (CONFIG_OPTION_ID) REFERENCES PRODUCT_CONFIG_OPTION(CONFIG_OPTION_ID) )
TABLESPACE DATA_SMALL
i try to create this table if i omit 3rd foreign key constraint then table successfully created.but including trd foreign key constraint it return error "ORA-02270: no matching unique or primary key for this column-list"
i checked everything is it possible to create foreign key from composite key in other table.

And
CONSTRAINT FK_CONFIG_OPTION_ID FOREIGN KEY (CONFIG_ITEM_ID,CONFIG_OPTION_ID) REFERENCES PRODUCT_CONFIG_OPTION(CONFIG_ITEM_ID,CONFIG_OPTION_ID)
?

Is it possible to read/write data from Salesforce using web service hub in Informatica?

Anyone from Informatica can asnwer this question please

Is it possible to read/write data from Salesforce using web service hub in Informatica? Not asking about PowerExchange for Salesforce or Informatica Cloud. Just using web service can we load data into Salesforce? Thanks ahead.

International keyboard with Norwegian layout - possible to remap some keys?

Hey, I have a MBP OS X 10.6.8 with international keyboard that I have selected a Norwegian layout on, since I need the special characters we have in our language (æ, ø and å).
My question is - is it possible to remap just SOME keys/characters while in this configuration?
The keys I need to remap are:
< to ` (so I can do Command-` in programs to change windows)
´ to ' (because I use the standard apostrophe)
Any way to do this in OS X, or maybe with other software? Thanks for any help!

Some possible options:
+Use system preferences/language & text/text/symbol and text substitution to create shortcuts
+Use Ukelele to create a custom keyboard layout
http://scripts.sil.org/ukelele
+Use the US layout and type your special characters using the built-in alt key shortcuts
http://homepage.mac.com/thgewecke/diacritics.html
Note: Standard apostrophe is alt + @ on the Norwegian layout (alt + \ if keys are printed for US layout).

Lead as Follow up document from Service Contract

Hi Experts,
There is a requirement to create Service Lead from Service Contract. I dont think there is something different by name Service Lead so i assume it is Standard Lead which is present in system.
I maintained the copy control for Tx. Types and as well as for Item Categories.
Issue:
If i create a Service Contract and create a follow up Lead with no items, it works fine.
Suppose i use an item (sales/service item), and i try to create a follow up Lead, the resulting pop-up to choose items from preceding document shows and error and the item doesnot get coped and displays an error, 'Sold-to-Party is not eligible for contract items'.
Has anyone come across this issue?
Thanks and Regards,
MG

Hi Maggii,
1. Is it possible to create a Lead from Service Contract? Does the system allow it even after maintaining relevant copy control configurations?
A.Yes, it is possible while arranging of copy controls for transactions need to activate u201CCopy Item numberu201D.
2.What does the error message, 'Sold to party not eligible for contract items' mean....have u ever seen such error?
A. Means, the particular sold to party is not maintained for that contract (for trail check with any maintained sold to party for that error message), cross check the contract again under in partner functions.
If it is suits to your requirement please some reward points,
Thanks,
Suuny.

L01 Key is empty in WebI report

Hello,
I want to create a WebI 3.1 report based on a BEx 7.01 query. The query contains the infoobject 0ORGUNIT for which several hierarchies exist but the query neither contains a hierarchy nor a hierarchy node variable for 0ORGUNIT.
When I use 'L01 Organizational Unit Key' in the WebI report, I can only see empty cells. Using 'L01 Organizational Unit' instead shows all values of my infoobject. For all other infoobjects it is possible to display the keys from 'L01 ... Key'.
In the BEx report key and text are displayed and value display in the query is set to "key and text" for 0ORGUNIT.
Thanks for advice.
Kind regards
Edited by: DeGe on Jul 8, 2011 10:15 AM

Bram,
This formula you used above is corrcet but is returning you a character '0' and when a descending sort is applied character values will be at the top.
So , apply the formula 'ToNumber' on the value returned form the above formula :-
ToNumber(above formula)
And then it will change 0 to number and give you the exact sort order.
Thanks,
Rohini Haksar

I lost my phone and the location service is off. Is it possible to turn it on from another device?

I lost my phone and the location service is off. Is it possible to turn it on from another device?

No.

Is it possible to send keys from LabVIEW.?

Is it possible to send keys from LabVIEW.?
(In VisualBasic this is possible through the sendkeys command.)

Hey I think i can help you
Inport picture with edit >inport picture from file.
Paste it into you frontpanel ctrl+v
Place you Graph control and pant it with transparent.
You must pant both the scale and the draw area with transparent.
Try also to use the Reorder funktion in the toolbar to get the picture in
background.
Esben
Click here for Free Video!!
http://www.gohip.com/freevideo/
wrote in message news:8b82k8$bjq$[email protected]..
> Hi!
> Does anyone know to insert a picture in the background of a graph and to
> plot over it ?
> I tried with the Edit Control command to import a picture (*.emf, *.bmp,
> *.xmf) from the clipboard to a graph indicator but the only thing I got
> was
a blank window.
>
> The other possibility would be to export the data to an excel worksheet
> and to plot an excel chart with the background already set-up but I'd
> rather use only one application.
> Can anyone help ?
> Thanks.
>
> Fabrice
>
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.

Possible to obtain Windows 7 product key from Lenovo for downgrade from Windows 8.1?

Hi all. I have searched all over these forums and haven't found the answer to my question, so I figured I'd just ask it.
I purchased an Ideapad Y580 with Windows 8 pre-installed. Hated it from the get go. Upgraded to Windows 8.1, and still don't like. But, now, I am having a ton of bug-y issues. Although I've managed to fix most, they have become increasingly annoying. The latest is that upon upgrading to Windows 8.1, my USB ports stopped working...except they sometimes work, some of the time, but never all of the time. Drivers are up to date, and every diagnostic test I have run passes. Surfing the net, it sounds like this is a common issue with windows 8.1.
I was speaking with my firm's IT company and was told that they have had the exact same issues with numerous clients. (As an aside, they universally place lenovo products in their client's hands). It has gotten so bad that they do not provide windows 8/8.1 on any of the machines they prepare for their clients.
Last week, I was speaking to the IT company's local rep who was performing some server maintenance for us, and he indicated that if you purchased a laptop pre-installed with windows 8 and didn't like it, you could obtain a windows 7 product key from the manufacturer and downgrade to windows 7. Is that accurate? if so, how do I make that happen?

Too be honest I suggest you do not downgrade unless you have to use software in your company that does not work on Windows 7.
Get started reading Windows 8 guides, and you will notice Windows 8 is a lot better after you have read all the guides:
http://lmgtfy.com/?q=windows+8+get+started+guide
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

Is it possible to use a serial key from Creative suite from a Mac on a PC?

I'm going to hopefully get CS6 for mac, but it's not my mac and when I get my own computer it will probably be Windows. Can I use the serial key from the Mac version on a Windows version?

Adobe currently licenses the Creative Suite for Mac or Windows not for both, however you can change your license from Mac to Windows or Windows to Mac by contacting support.
Adobe calls this "crossgrading", check out the FAQ page here which will give you guidance on how to go about changing platform when you get your windows machine http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l
Worth noting that while you will be able to transfer your license from the Mac to the PC you will no longer be able to use the software on the Mac as a result.

Conformation Control Key for Service PO

Hi All,
I like to know that for Service PO, do we have any usage of Conformation Control keys. One I understand is the information purpose like the services will be provided from this date to this date. ANy other thing we can control from this key like service entry sheet.
Best Regards
Lovkesh

Hi Lovkesh,
I have been checking this issue in my system and it has allowed me to create a service purchase order with confirmation control, but it indeed works different than for normal purchase orders (=with material master).
In the case of services, I have been able to create and accept a service entry sheet without entering the relevant confirmation from the vendor.
In the case of materials this is not possible, and, in order to be able to enter and post a goods receipt, you need to enter the vendor confirmation if the purchase order item is subject to confirmation. Otherwise, the error message "Purchase order & has no items" is sent.
I do believe that this functionality has not been developed thinking in services, but I have not located any note or document which can confirm this.
I hope this helps!
Esther.

Remap funtion keys in Abap wd solutions

Is it possible to remap somehow user keyboard function keys when use web dynpro for ABAP?
I now have to use third party product for this but it is amazing if there is no solution from SAP for this because you can not then use dynpros in PDA mobile solutions at all (without third party solutions).
So what i need is: user use web dynpro via broswer, there is input field in window and cursor is in it, user push example F1 ---> awd write F1+ennter into input field.
Thanks.

Hello Reko,
to my knowledge there's currently no way to assign function keys to events of ui elements.
Best regards,
Thomas

Can I use product key from Windows 7 32bit to 64bit?

Hi, i have a Toshiba L505-10V and the original cds(2) with Windows 7 prenium 32-bit.
I have downloaded windows 7 prenium 64bit from here http://www.techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/
I use the key from 32 bit but it says its not valid. Is it possible to work with the same key?
Also i download belarc to recoginise my 32bit windows key and it shows me different key from that is on the base of my pc.

Hi
According notebook specification your notebook was delivered with preinstalled Win7 64bit Home Premium and you got 32bit version on recovery DVD.
Both recovery versions are designed for your notebook model and both versions contain activation code so that both versions must not be activated.
I presume you didnt create recovery disc for preinstalled Win 7 64bit version.
You cannot use product key listed in 32bit version. If you use own Windows version you must enter valid product key that you must buy from Microsoft.

Can we remove keys from the UITextField keyboard?

Greetings again
The app I'm working on, I'm wanting the user to enter in a value that will be placed in to a double.
I've already used the TextFieldDelegate information to limit the possible keys that will be accepted by the keyboard (no letters, no symbols, '-' only on the first byte, no more than one '.', etc.)
But the keyboard that I'm using has keys to allow the user to change keyboards to symbols or QWERTY. While those keyboards won't be useful to the user due to my other logic, if it's possible to prevent the user from changing to the other keyboards, I'd like to do so.
Thanks

Andreas Amann wrote:
Depending on what exactly you need in your UITextField, you should consider setting its keyboardtype:
myTextField.keybardtype = UIKeyboardTypeNumbersAndPunctuation;
Andreas
You gave me an idea to try, but it didn't work.
In my TextField Delegate method, I've added the following:
if ([textField keyboardType] != UIKeyboardTypeNumbersAndPunctuation)
[textField setKeyboardType:UIKeyboardTypeNumbersAndPunctuatation];
return NO;
But that doesn't seem to be working. The logic passes it, as if it's true.
So now my question is, is there any way for me to detect that the user has changed keyboards? If I can detect it, I may be able to force it back.
Again, if not, I'll restore what I had and call it "best I can do due to the limitations"
thanks again.

Is it possible to Update Remote Key

Hi,
I have a remote system which create remote key while syndicating to ERP...
ERP will create the material number which inturn needs to be updated in MDM using import manager..
While importing I am mapping Material number to remote key.. which is creating new remote key along with defualy remote key generated while
syndication... Is it possible to have one key as it is of same material from same system? And at the same time it is again syndicating after
I import with material number (Remote Key)..
Thanks
Rajeev

HI Ravi,
by doing so I am having the dublicates in the Data Manager...
Steps I peffromed :
I have a main table of fields FName(DF),LName,City ....I created a remote Sytem (Remote1) with range of 1000 to 2000 .. Imported two records say ((A,AA,City1)(B,BB,CITY2)) using FName as matching filed (I didnt mapped remote key).. MSS is started so I see the keymapping as A,Remote1 and 1000 and B,Remote1 and 1001 for these two records..
NNow I created a dummy remote system and added a new field to the main table MatNumber.... I importing the file with (A,AA,City,Mat1) and remote system as dummy where I am mapping MatNumber to Remote Key... By doing so I see three records with one record dublicating as It got imported from new remote system with key value Mat1..
Can you please guide how to havve only two records by just updating the key value....
Thanks
Rajeev
Edited by: rajeev raj on Jun 22, 2010 10:53 AM

Possible to remap 0 key from Services to Web?

Similar Messages

Maybe you are looking for