Post Goods Receipt Reversal with VL09 for customer returns in WM

Hi,
We have performed Goods receipt and stock was putaway with a TO confirmation in WM. Now we want to reverse the goods receipt and the quantity is not in 904 area for returns. How can I get the stock back to 904 from regular storage type with same dynamic bin number as my customer return delivery number? Basically When I do VL09 system complains that it canot find the dynamic bin number which is same as my delivery number. Answer will be rewarded.
thanks,
Sarvesh

the optional solution can be as following steps:
1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
2) reverse with vl09 and a material doc will be created.
3) check the bin stock with ls24, you will see negative stock in 904.
4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
5) confirm TO
6) don't forget to delete the bin created in step 1, this is because it is created manually but not dynamic bin that will dissapear automatically.
pls reward if helpful.

Similar Messages

Post Goods Receipt(PGI) with custom condition types on purchase order(PO)

Hi all,
I am trying to post goods receipt with custom conditions on the PO. One of the custom conditions is freight (delivery cost). The value on this condition will post to a different G/L account (freight provision account, rather than GR/IR).
My problem is, when posting this GR, the cost center assigned in the PO under 'account assignment' is not used for posting the custom condition, which I really need it to happen.
Simply put, I want all postings from this PO inherit values in 'account assignment'.
I have been looking into configurations in automatic posting and condition types, but I still have no clue where I can make it happen. Do I have to use BADI?
Thanks.

Delivey cost condition will be posted to accrual accounts not to the cost center.

STO Post goods issue reversal using vl09 not happening.

hi
user has done following cycle
1.ME21N-PO document type UB and Item cat I.
2.VL10B- Outbound delivery
3.VL06G-goods issue using automatic MVT 647 and 101)
4.VF01-Performa Invoice(billing Type JEX)
5.J1IIN- Excise invoice.
In billing base price is missing because of that all duties and net price zero.now user wants to cancel entire cycle. he has done excise cancellation using J1IH. we are not able to reverse billing using VF11, we are not able to PGI reversal using Vl09. it giving error "No dat available for your selection".
Note: is it problem of JEX because we have not assigned cancell billing type and doc pric procedure to JEX?
any solution for the above issue.

the optional solution can be as following steps:
1) create the bin manually with ls01n: storage type 904, bin name is the delivery number,
2) reverse with vl09 and a material doc will be created.
3) check the bin stock with ls24, you will see negative stock in 904.
4) create TO to offset this negative qty with lt06 with above mentioned material doc. this TO's source bin is just the one in regular storage type.
5) confirm TO
6) don't forget to delete the bin created in step 1, this is because it is created manually but not dynamic bin that will dissapear automatically.
pls reward if helpful.

BADI or User Exit for Post Goods Issue Reverse (VL09)

Hi,
Could you please let me know any BADI/User Exit which will trigger while doing Post Goods Issue Reverse through VL09 transaction.
Thanks,
Sandeep

Hello,
If you can be specific about your requirement, then response can be better.
Still, check with following Exit:
- V50R0001 Collective processing for delivery creation
- V50R0002 Collective processing for delivery creation
- VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
- VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
- V50S0001 User Exits for Delivery Processing
Thanks & Regards
JP

BAPI_GOODSMVT_CREATE Goods Receipt Reversal

Hello All,
According to SAP docs I need to use goodsmvt_code-gm_code = '06' but with movement type 102 I get an error message "Goods movement not possible with movement type 102". Works fine if I use regular goods receipt code '01' and movement 102. Please let me know if Im missing something here.
Also, how do you post goods receipt reversal referencing goods receipt and not PO with BAPI_GOODSMVT_CREATE?
Thanks,
Leon

Hi Leon,
I found the following documentation by SAP seems to be helpful for you.
<b>You can use the Cancel method to reverse goods movements. But you may also want to cancel a goods movement without referring to a material document (see the Cancel method).
If you want to work without referring to the document, you have to fill the field BAPI_GM_ITEM_CREATE-XSTOB in the interface (import table GOODSMVT_ITEM). In this case, the system converts the movement type assigned in the interface to the reversal movement type. Alternatively, you can set the reversal movement type in the interface. In this case, the BAPI_GM_ITEM_CREATE_XSTOB field must be transferred blank.
If you want to cancel a goods movement with reference to a reservation (without using the Cancel method) you can only transfer the field BAPI_GM_ITEM_CREATE_XSTOB if it is filled. Movement types are not transferred when you post with reference to a reservation, as the movement type is contained in the reservation item.</b>

Cannot post Goods receipt in MIGO Error message"Field Business Area requird

Hai
I am posting Goods Receipt ( MIGO) with Reference to Purchase Order its having 47 Line item material. When i will doing Goods Receipt with rreference to po number its triggered error message in :Message No F5808 Field business Area is a Required field for G/L account 1180 300000 . for only particular line item 47 material shown error..
i checked all the settings in MM Automatic determination And G/L element, field variants, posting keys.. but everything configured profer settings..why particulat materail it shown error? how to resolve this error?

Hi Thiru,
A somewhat late aswer, but it might be helpfull for other users with the same problem. You can solve this problem by assigning the division/valuation area to the business area. Follow the path below to execute this:
SPRO - enterprise controlling - Consolidation - Integration: preparation for consolidation - Preparation in the sender system - Further settings for Business Area Consolidation - Materials Management - Assign Division/Valuation Area to Business area.
Under Enterprise structure - Assignment - Logistics General, you will find a similar function. First execute option 1 or 2 here and then execute option 3. This makes it work as well, exept that it will not be recorded in a proper transport. The first option I gave for assigning is properly transportable.
Greetings,
Sjaak van den Berg
Magnus Technology Consultants
Edited by: S. van den Berg on Aug 14, 2009 1:09 PM
Edited by: S. van den Berg on Aug 14, 2009 1:10 PM

Goods Receipt reversal

HI
Following error is coming in goods receipt reversal account determination for entry dsds prd bs01_zc01 not possible,
dsds-company code,bs01-plant,zc01-valuation class,why system asking to assign gl account in obyc for prd,(price difference account).
Regards
Sam

Hi,
Is the material valuated at standard cost and there has been a price change?

How to post good receipt for an inbound delivery with HU in the stock?

Hello,
We have an inbound delivery of a purchase order with 10 Handling Units inside on.
The HU's has been put in a storage bin (by transport order + confirmation) before a good receipt has been posted for the whole delivery.
Due to this it's not possible to post good receipt for the inbound delivery, and the available stock quantity is in minus on zone: '902-GR Area External Rcpts' since the handling units are already in a storage bin.
Can anyone help me on this matter?
Thanks

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Reverse post good receipt?

hi,
using VL09 to reverse PGI, but how about PGR? If i dont it wrong, i cannot use VL09 to reverse. Any idea? thanks

Hi,
You can reverse the Post Goods Issue using VL09. That means ur taking back the stock before you are doing billing in this situation.
Where as Post Goods Receipt means after doing return order and return delivery from the customer you are taking the stock back. Once after doing PGR your stock in the plant level will be updated with the returned stock.
You cant reverse this post goods receipt. If you want to do reverse the post goods receipt means you want to give the stock back to the customer. Then at this situation you cant do simple as reverse of PGI.
You have to do complete sales cycle once again, from sales order, delvery and PGI.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

Batch needs to be created 1st then post goods receipt with inbound delivery

Hi,
We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
When we create inbound delivery with PO batch is blank which is correct.
Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
Can you please let me know this behaviour, is there any SAP note available about this behaviour.
Thanks
Sudhir

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Error in post goods receipt of delivery for a cross company return STO

Hi
I created a cross company return STO in ME21N (with returnd indicator). Vendor V001 (DC) and Site F001.
I created a delivery in VL10B. Delivery Type NCR.
I did a Goods Receipt for STO. Movement Type 161. Internally stock in issued from site F001.
I am trying to do a Post Goods Receipt of the Delivery in VL02N and I am getting this error.
Delivery quantity is greater than supplying site stock quantity
Message no. VL900
Supplying site is F001 which has enough stock.
DC has no stock and I amtrying to return stock to DC from store.
How to eradicate this issue?
Thanks and Regards

Hi
http://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOne...ToGo-3.TheBasicsofFinancial+Accounting
http://help.sap.com/saphelp_sbo88/helpdata/en/45/06b9997d720487e10000000a155369/content.htm
kiran

Material Document (Post goods receipt) for each Tranfer order in Inbound De

Hello All,
We have following the below process for goods receipt.
1. Create Purchase order.
2. Create Inbound Delivery.
3.Create Transfer order for each line item in Inbound Delivery
4. Confirm tranfers orders.
5. Post goods receipt will automatically takes place after last Transfer order confirmation for that delivery.
So, in the above scenario the Inventory is not available in the IM till last transfer order is confirmed.
So, is it possible to create a Material Document at each transfer order confirmation and post IM inventory , instead of waiting till last transfer order is confirmed.
please advice.
Thank you
T Reddy .

Hello Aktar,
Yes With standard SAP we can post goods receipt either before using MIGO and after using VL32N.
In our scenario we are using Inbound Delivery.
So , with using Inbound delivery we are posting goods receipt after last TO confirmation.
But In our client they may take 2 days to puyawat all the items of an Inbound Delivery.So they do not want to wait till 2 days for the IM posting.
ie in SAP WM as soon as Inbound delivery is created it creates negative stock in 902 and once all the transfer order are confirmed and then post goods receipt takes place and 902 is cleared.
So, we are slitting the TO at delivery line item level and creating separate TO for each line item in a delivery.
So, I am wondering whether is there a way so as soon as first TO is confirmed WM stock updates and IM stock also should also update with same amount with a material docuement.
ie TO by TO IM posting should take place and at Last TO post goods receipt should happen at delivery level.
Please advice.
Thank you
T Reddy.

Batch number issue when posting goods receipt for Subcontracting PO

Dear expert,
I always heard there will be issues while posting goods receipt for subcontracting PO. If the component is managered by batch.
No batch number will be proposed during PGR in MIGO...
I dont quite understand where is the issue??
My understanding:
We have batch managered components and End Product. All have batch numbers, then we PGI the stock to 'SC stock' via 541 movement type.
Then Vendor will finish the end product and send us back the end product.
We consumption the components use 543 O movement type? And GR the end product..
So while goods receipt, the sytem just need pick the existing batch number for both components and finish products..
Where are the issues???
Thanks.

Hoo Laa wrote:
I have questions for people always mentioning there are issues with batch determination while post goods receipt for subcontracting orders.
>
> I am thinking maybe they didnt active the batch determination for 543 movement type..
>
> Thanks.
Hi Hoo,
You are right!!
Setting of batch number determination has its importance in Mvt Type be it 541, 543....
The issue you might have observed would be with Batch Determination in Goods Issues which folks find it bit tough to achieve n make it work for them.
Cheers!!
Shiva

Inbound IDOC to post goods receipt with inbound delivery as reference

Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

Hi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
                        Message DESADV
                        Operation code DELS
OUTBOUND - Partner KU
                        Message DESADV
                        Operation code ???
Please advise
Suchart

Good Receipt (movment type : 161) for a PO (PO with Return items) -- Error

Hi,
When i post a good receipt (movment type : 161) for a PO (PO with Return items), i have this Error Message :
" Account 61522200 requires an assignment to a CO object "
Note : in this GR i have already : Profit center, Funds center and Order (CO objects)
So please what could be the reason ? and how to resolve it ?
Please advise
Regards.

Please check first the field status of the account in FS00. If this account requires CO object as mandatory then check whether a cost element is created or not , this error normally occurs when CO object is mandatory but relevant cost element is not created.
(or)
Goto OKB9 : The u201CChage View u201CDefault account assignment: Overviewu201D appears. Enter the company code, cost element, and default cost object. The cost object could be a cost center, internal order or profit center.
Edited by: m_n_novice on Sep 2, 2009 5:51 PM

Post Goods Receipt Reversal with VL09 for customer returns in WM

Similar Messages

Maybe you are looking for