Post Implementation System Configuration Documentation

What software tools or applications does SAP use that lets you "see" how the system is currently configured or set up, either by functional area or module and/or across business processes (multiple modules)? Ideally this would be at varying levels of detail.
Reason for question: A prospective SAP customer is asking how SAP documents all the changes made during an implementation so they can refer to it when they are "on their own" and their business forces them to change, which means new SAP configurations or updates to thier current SAP system. They would like to refer back to how the current system is set up as a starting point. Do they just have to remember?
Thanks in advance for any replies.

Hi Brian,
I think you can find the best answer to your question if you refer to the NetWeaver Master Guide (especially section 2.2 Identification of your SAP NetWeaver
System Landscape). You can find it on Service Marketplace at: http://service.sap.com/nw04doc -> Planning (from the table in the main frame) -> Master Guide - SAP NetWeaver (click on the download link).
Also, after reading the stuff in this section of the Master Guide, I'm pretty sure you'd like to find out more about System Landscape Directory. So, here's a direct link to SLD's documentation: http://help.sap.com/saphelp_nw04/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm
Regards,
Ivo

Similar Messages

Implementation & initial configuration of SolMan 4.0

Hello ALL,
I am new to Solution Manager. I know the functionalities and the basic steps like defining the project, system landscape, assigning team members etc.
I have been asked to help with implementation and initial configuration of SAP's Solution Manager 4.0
we are doing a brand new implementation, making this requirement mandatory. I need assistance in determining what SM4 can do for us in our particular circumstances and guidance in configuration of communication between systems. I need guidance in establishing the communication between each of the systems and SM, determining appropriate thresholds for warning, development of automatic notification of problems (email, or perhaps even auto pages). We will also want to evaluate the pros and cons of using solution manager for change management.
Our R/3 system is at WAS 6.20 and running on MS SQL Server 2005. Solution Manager will be installed on it's own dedicated server, which we have built and loaded with the OS. We have Solution Manager 4 DVDs and the prerequisite WAS 6.40, Netweaver 2004s disks. We currently have development, QAS and production R/3, ESS Portal and Business Warehouse (BI). we also have a standby production server. All will need to be monitored using Solution Manager 4.
Can anyone help me how to go about with initial implementation and configuration. Appreciate your answers.
Thanks
Vom

Hello Vom,
For me the better information source for a beginner is service.sap.com/rkt-solman, there is very good iTutor under the 4 different user roles that will help you with satellites connection configurations, use of the different scenarios of solman.
For configuring the selected escenarios the best is in SOLMAN->spro read the step documentation.
Also alias solutionmanager->Media Library->Documentation and Technical papers will give you more extra information.
Best regards,
Dolores

Post Implementation Internal Control review

Can anybody assist with an audit program and/or standard checklist/procedures for conducting an Internal Control review of Oracle Financials once the implementation is complete and the system has been in use for a few months?
Note: Does not need to cover the Technical aspects of the system.
email: [email protected]

Hi Ravikanth,
Review/Audit has to take place each and every phase of implementation such as:
1. Audit is to be done from As Is/To be to BBP- whether all the business processes are mapped in BBP.
                                                                            Check whether any change management issues are defined are not
2. Audit is to be done on BBP - Whether the standanrd SAP/Developments are meeting the user requirements or not
                                                  Identified GAPs are correct or not
3. Audit is to be done on Realization - Check whether all the proceesses defined in the BBP are mapped in SAP or not
                                                             Check the configuration documents with the actual configurations in DEV/QAS
                                                             Thurve testing has to be done at the time of realization- Positive and negitive
                                                             Test cases/test scenarios are to be prepared to make assesment
4. General - Training at each and every level is essential
                     User should acquint to use SAP system
The above are need to be checked while implementation. Post implementation review has to be done before implementation partner is getting sign off for Go Live. Once proper testing is done the Go Live phase is to be signed off.
Thanks and Regards,
Krishna Prasad Gupta

Adding New SAP System in System Configuration

Hi
i want to add a new system in Portal
i follow the path system administration -- system configuration -- portal content -- <my folder> -- < add system template >
i can successfully do this
in the objects i have maintained
Connector
where i have given system details like IP Address,Logical name, Client Sys Nos,remote Host Type,SID
i have also maintained
User Management
where i have given logon Method <UIDPW>,User Mapping Type as <admin,user>
i have created a system Alias also
now when i do the Connection Test
i m getting the following error
Error
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties
how can i rectify this error and if this is not the right forum in which forum i need to post this message please suggest.......
Regards
Neha Shah

Hi,
which System Template did you use?
Did you maintain the Usermapping in the identityManagement for the User that is currently logged on?
Did you set 'Authentication Ticket Type' to 'select'?
Kind regards
karin

Oracle R12 Installation Error - Validate System Configuration

Hello,
I was doing the oracle apps R12 installation and got this error
=======================
Validate System Configuration
The post-install check inspects your system for a complete installation.
The list below shows the tests that were performed and the results.
Click on the test icon for details.
One or more of the post-install tests did not succeed for this:
Database Availability
HTTP
Virtual Directory
Login page
Configuration Upload
Help page
JSP
=======================
I’ve checked the details which are listed below.
Please help me in solving the issue :(
Configuration Upload
uploading config file at /u05/oracle/TEST/db/tech_st/11.1.0/appsutil/conf_TEST.txt
Failed upload of config file at /db/tech_st/11.1.0/appsutil/conf_TEST.txt
Database Availability
command: su dbuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:42:59 IST 2012
Parameters passed are : /u05/oracle/TEST/db/tech_st/11.1.0/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/oracle/TEST/db/tech_st/11.1.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /u05/oracle/TEST/db/tech_st/11.1.0/perl/bin:/u05/oracle/TEST/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u05/oracle/TEST/db/tech_st/11.1.0/appsutil/jre/bin:/usr/ccs/bin:/bin:/usr/bin/X11:/usr/local/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin:.
LD_LIBRARY_PATH : /u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/oracle/TEST/db/tech_st/11.1.0/lib:/usr/dt/lib:/u05/oracle/TEST/db/tech_st/11.1.0/ctx/lib
Executable : /u05/oracle/TEST/db/tech_st/11.1.0/bin/sqlplus
riwTDBup.sh exiting with status 3
RW-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3 command: su appsuser -c "/tmp/RapidInstall/bin/riwTDBup.sh /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS"
riwTDBup.sh started at Fri May 25 06:43:16 IST 2012
Parameters passed are : /u05/appl/TEST/inst/apps/TEST_erp/ora/10.1.2/TEST_erp.env APPS/APPS
The environment settings are as follows ...
ORACLE_HOME : /u05/appl/TEST/apps/tech_st/10.1.2
ORACLE_SID :
TWO_TASK : TEST
PATH : /u05/appl/TEST/apps/tech_st/10.1.2/bin:/usr/bin:/usr/sbin:/u05/appl/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin:/usr/bin:/u05/Setup12.1.1/startCD/Disk1/rapidwiz/unzip/Linux:/usr/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin:/root/bin
LD_LIBRARY_PATH : /u05/appl/TEST/apps/tech_st/10.1.2/lib32:/u05/appl/TEST/apps/tech_st/10.1.2/lib:/usr/X11R6/lib:/usr/openwin/lib:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/server:/u05/appl/TEST/apps/tech_st/10.1.2/jdk/jre/lib/i386/native_threads:/u05/appl/TEST/apps/apps_st/appl/sht/12.0.0/lib
Executable : /u05/appl/TEST/apps/tech_st/10.1.2/bin/sqlplus
riwTDBup.sh exiting with status 2
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 2
Help Page
checking URL = http://erp.tez.co.in:8009/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
HTTP
checking URL = http://erp.tez.co.in:8009
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
JSP
checking URL = http://erp.tez.co.in:8009/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

Hi,
I think my linux was corrupted :(
I've done fresh linux installation and after that the R12 installation is complete without any issues :D
Thanks for you help Hussein Sir

1.1 performance problems related to system configuration?

It seems like a lot of people are having serious performance problems with Aperture 1.1 in areas were they didn't have any (or at least not so much) problems in the previous 1.01 release.
Most often these problems occur as slow behaviour of the application when switching views (especially into and out of full view), loading images into the viewer or doing image adjustments. In most cases Aperture works normal for some time and then starts to slow down gradually up to point were images are no longer refreshed correctly or the whole application crashes. Most of the time simply restarting Aperture doesn't help, one has to restart the OS.
Most of the time the problems occur in conjunction with CPU usage rates which are much higher than in 1.0.1.
For some people even other applications seem to be affected to a point where the whole system has to be restarted to get everything working up at full speed again. Also shutdown times seem to increase dramatically after such an Aperture slowdown.
My intention in this thread is to collect information from users who are experiencing such problems about their system configuration. At the moment it does not look like these problems are related to special configurations only, but maybe we can find a common point when we collect as much information as possible about system where Aperture 1.1 shows this behaviour.
Before I continue with my configuration, I would like to point out that this thread is not about general speed issues with Aperture. If you're not able to work smoothly with 16MPix RAW files on G5 systems with Radeon 9650 video cards or Aperture is generally slow on your iBook 14" system where you installed it with a hack, than this is not the right thread. I fully understand if you want to complain about these general speed issues, but please refrain from doing so in this thread.
Here I only want to collect information from people who either know that some things works considerably faster in the previous release or who notice that Aperture 1.1 really slows down after some time of use.
Enough said, here is my information:
- Powermac G5 Dualcore 2.0
- 2.5 GB RAM
- Nvidia 7800GT (flashed PC version)
- System disk: Software RAID0 (2 WD 10000rpm 74GB Raptor drives)
- Aperture library on a hardware RAID0 (2 Maxtor 160GB drives) connected to Highpoint RocketRAID 2320 PCIe adapter
- Displays: 17" and 15" TFT
I do not think, that we need more information, things like external drives (apart from ones used for the actual library), superdrive types, connected USB stuff like printers, scanners etc. shouldn't make any difference so no need to report that. Also it is self-evident that Mac OS 10.4.6 is used.
Of interest might be any internal cards (PCIe/PCI/PCI-X...) build into your system like my RAID adapter, Decklink cards (wasn't there a report about problems with them?), any other special video or audio cards or additional graphic cards.
Again, please only post here if you're experiencing any of the mentioned problems and please try to keep your information as condensed as possible. This thread is about collecting data, there are already enough other threads where the specific problems (or other general speed issues) are discussed.
Bye,
Carsten
BTW: Within the next week I will perform some tests which will include replacing my 7800GT with the original 6600 and removing as much extra stuff from my system as possible to see if that helps.

Yesterday i had my first decent run in 1.1 and was pleased i avoided a lot perfromance issues that seemed to affect others.
After i posted, i got hit by a big slow-down in system perfromance. I tried to quit Aperture but couldn't, it had no tasks in its activity window. However Activity Monitor showed Aperture as a 30 thread 1.4GB Virtual memory hairball soaking-up 80-90% of my 4 cpu's. Given the high cpu activity i suspected the reason was not my 2GB of RAM, althought its obviously better with more. So what caused the sudded decerease in system perfromance after 6 hours of relative trouble free editing/sorting with 1.1 ?
This morning i re-created the issue. Before i go further, when i ran 1.1 for the first time i did not migrate my whole library to the new raw algorithum (its not called the bleeding edge for nothing). So this morning i selected one project to migrate all its raw images to 1.1 and after the progress bar completed its work, the cpus ramped and system got bogged-down again.
So Aperture is doing a background task that is consuming large amounts of cpu power, shows nothing in its activity monitor and takes a very long time to complete. My project had 89 raw images migrated to the 1.1 algorithum and it took 4 minutes to complete those 'background processes' (more reconstituting of images?). I'm not sure what its doing, but it takes a long time and shows no obvious sign it is normal. If you leave it to complete its work, the system returns to normal. More of an issue is the system allows you to continue to work as the background processes crank, compounding the heavy workload.
Bit of a guess this, but is this what is causing people system's problems ? As i said if i left my quad alone for 4 minutes all returns as normal. Its just not normal to think it will ever end, so you do more and compound the slow-down ?
In the interests of research i did another project migrating 245 8MB raws to the 1.1 algorithum and it took 8 minutes. First 5mins consumed 1GB of virtual memory over 20 threads at average 250% CPU usage for Aperture alone. The last three minutes saw the cpus ramp higher to 350%, virtual memory increase to 1.2GB. After the 8 minutes all returned to nornal and fans slowed down (excellent fan/noise behaviour on these quads).
Is this what others are seeing ?
When you force quit Aperture during these system slow-downs what effect does this having on your images ? Do the uncompleted background processes restart when you go to try and view them ?
If i get time i'll try and compare to my MBP.

Managed system Configuration Diagnostics Prerequisites check fail

Dear All,
My solman_setup initial configuration part and basic configuration part all passed without error. And when I do the managed system configuration part , first I choose the solution manager itself and the client 001 to config , and then the maintain connection passed OK , but in the next step , check Prerequisites, it fails. The Navigation Button just open a link to the SAP Service Market Place, and the IMG documentation just let me to see the note 1010428. The deatl part of the execuation result of the Prerequisites open a page but with error statement as below :
Service cannot be reached
What has happened?
URL https://sapsolmgr.centurydsp.com:8000/webdynpro/dispatcher/sap.com/tcsmdnavigation/StandaloneApp call was terminated because the corresponding service is not available.
Note
The termination occurred in system SM2 with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:SAPSOLMGR_SM2_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Any comment will be appreciated.
Enddy.

Hello Enddy,
This sounds as if you have yet to configure the HTTP services in SPRO or have misconfigured them. Please review your configuration for the HTTP Services as it should resolve your issue.
Please review the diagnostics URL to see if it helps you out:
http://service.sap.com/diagnostics
Also, please review the following SAP Notes which will also guide you through diagnostics and solution manager setup/installation:
1010428 End-to-End Diagnostics
1145779 SAP Solution Manager 7.0 Installation
1163836 Solution Manager Diagnostics required for troubleshooting
Also pay attention to the relevant notes listed on the bottom of these. If you follow these documents, I'm sure you will have your issue resolved.
Hope this helps you out!
Thanks,
Mark

Managed system Configuration : The JMX metrics of this Host / Byte Code Adapter are missing

Hi Friends
While Configuring EP system with SOLMAN 7.1 SP12 it is giving below message in self Diagnosis Phase.
1. Solman system is already having ISAGENT version 8 and 9 installed (but Managed system is having 8)
2. I have followed the automatic Process as below
==========================================
Automated Installation of the Introscope Agent via SMD
The Solution Manager provides an application that performs the setup of the Introscope
byte code agent for Java automatically. This section explains the steps to run the setup.
Before you can run the Introscope agent setup, the setup wizard for the managed system
must have been executed.
1.
2.
3.
4. Launch the Introscope Setup application: SAP Solution Manager Configuration 
Managed Systems Configuration  Step 7 Configure Automatically  Automatic
Activity “Byte Code Adapter Installation”  “Open Java URL” (only available in edit
mode). Your screen will look similar to the image below:
5. Check the Enterprise Manager Settings at the top of the screen. These are the
connection parameters that will be used by the agent to connect to the Enterprise
Manager.
6. In the pane Introscope Agent Setttings, select the system that you want to instrument
with the agent. Check “select all” and click “Retrieve Current Settings”. This will display
the current status of the agent setup.
7. To initially setup or update the agents, click Setup Introscope Agent …. This will open
the setup dialog as shown below. Select the desired agent version (by default only one
available) and choose the profile. Next, check the desired instrumentation areas, and,
in the case of AIX, review the AIX settings to match your environment (J9 or classic
mode).
8. Finally, hit Apply to perform the necessary changes in the agent configuration. Agent
config files will be adapted and the Java VM parameters will be set as required for the
managed system.
================================================================
3. Restarted SAP but error still present.
Please help to resolve the issue.
Thanks

Found the solution :
1819577 - Workload Analysis data missing for Java systems when using ISAGENT 8.2.4.0
Cause
l This issue has been identified as product defect and documented in note 1273028
Resolution
l As mentioned in note 1273028, update to ISAGENT 8.2.4 Patch 1 timestamp: 2012-06-26, please proceed as described below)
1. Enable the Maintenance Mode in the Agent Administration UI (http://solmanserver:port/smd/AgentAdmin)
2. Deploy the file to the Solution Manager JAVA stack using the Software Deployment Manager (SDM)
3. Disable the Maintenance Mode in the Agent Administration
4. Execute again the activity 'Byte Code Adapter Installation' of the step 'Configure Automatically' in the 'Managed System Configuration' for the
affected systems. This activity will deploy the new version of the
Introscope JAVA agent in the managed system servers and reconfigure the JVM parameters to use the new version of Introscope JAVA
Agent;
5. Check from Introscope Agent Admin if "IS Agent State" contains value "Running but needs restart"
6. Restart the affected managed system(s)
Finally Solution is update your SOLMAN system patch ISAGENT 8.2.4.0 from patch 0 to 1 via SDM.
Thanks
Mukesh

DMS Configuration Documentation

Hi,
Can anyone pls send me the DMS configuration documentation ?
If I want to use Fileserver ( external data server but not SAP content server) for storage of documents then how do I configure this ?
Do anyone have any idea ?
One more question: While assigning original files to the documents we have to assign Document storage area. How and where this is configured ?
thanks and warm regards
Purnendu

Hi Maiti,
Did you get any idea?
I have not worked on the your scenaio, but trying to find the solution.
You define settings for the Internet Application Component Document
Search on the Web here.
For more information, see the following documents:
o Document Management: Document Search in the World Wide Web
 For information about the features of the document search.
o SAP Library
 For information about the installation of components of SAP
 Knowledge Provider:
 - SAP Content Server
 - Index Management Service
 - SAP Gateway
 In the SAP Library, choose:
 Cross-Application Components -> Document Management -> Original
 Application File of a Document Info Record -> Storing Original
 Application Files -> Storage of Data in Storage Systems Using the
 Knowledge Provider and Installation Notes
Internet Transaction Server / SAP@Web Studio (BC-FES-ITS)
Complete business solution for linking mySAP.com components to the
Internet.
Regards
Rehman
Internet Application Components (IACs) enable users to access business
information in mySAP.com components by starting SAP transactions,
function modules, or reports from a Web browser.
You can make IACs available to users outside your company using the
Internet or users within your company through the intranet.
You can modify and use the IACs supplied by SAP or use them as templates
for developing your own.

PI/XI System Configuration Audit

Hi,
I am looking for some good reference document or the majority of the settings we need to look on to do PI/XI System Configuration Audit by which we can re-check the system configuration at regular intervals.
Thanks
Sekhar.

Hi,
Refer the below links:
General Configuration Steps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
Personal Settings
http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
Refer these post installation links
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm
Thnx
Chirag

System configuration issue

Hi,
I have one issue while using the system configurations .
I have created the two data store configurations with two different databases .
I have created two system configurations for two database configurations .
But while running the job it loading data from default data store configuration only for both system configurations .
It is not loading data from other data store configuration .
What will be the issue?
Thanks & Regards,
Ramana.

Are you sure you have associated your datastore configurations with your system configurations? If in doubt, please post a screenshot.

SOLMAN_SETUP - Managed System Configuration - DBA_COCKPIT

Dear SAP Colleagues,
I am currently implementing SMD in my Solution Manager system. I use the guided procedure SOLMAN_SETUP. The first 2 phases - Initial and Basic Configuration are completed.
I have starting the 3rd one - Managed System Configuration - Manual Configuration.
I have started the "Configure DBA Cockpit".
I have no problem with most of my managed systems (ERP, BI, EP)..
But when I want to configure the DBA cockpit for my PI systems, I get error.
Even if I personnaly there is nothing to do with the SAP Product, I get an error when I want to configure my all 3 PI system in DBA Cockpit.
1. I select the Managed System in my list
. The DB Host Name is automatically filled out.
. The DB Name is automatically filled out.
. The Schema Name (Optional) is also automatically filled out.
2. Then I click on Next button and I get this error :
The DB connection is no successfully tested.
Please make sure the parameters below are correct and hit ....
Database Name : XDS
Datbase host : xdsci
TNS Name : ???
User Name : SAPXDS
Password : ???
Question :
1. From where (SLD or SMSY) these information (Database Name, Database Host, TNS Name ...)
related to managed system XDS are uploaded ?
In other terms, where are these technical information pre-configured ? In SLD ? In SMSY ?
2. How may I fix this issue ? I did not configure the other managed system and it perfectly works.
Thanks in advance for your help
Best regards
CP

Hi,
I found this OSS Note : 1265070
You can also connect directly to this link :
https://websmp207.sap-ag.de/~sapidb/011000358700000074392009E
Best regards
CP

System Configuration - SAP Web AS Connection - connection tests error

hi
I have a SAP ECC 6.04 and sap portal 7.01
When I entered in option System Administration / System Configuration / System Landscape / Portal Content Tree / Systems / SAP_ECC (System created by me)
I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
5. The host name htc-svr-erp.humantech.es was resolved successfully.
6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.
...also see a red "X" near a title SAP Web AS Connection
I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
In "old sap system", stack java + abap
http://img830.imageshack.us/img830/9755/oldsysstack.jpg
In "new sap system", stack java separated abap
http://img97.imageshack.us/img97/8627/newsysstack.png
In Portal
In "old system", I created "SAP_HCM" System
In "new system", I created "SAP_ECC" System
The "Connector" view (Object Option)
http://img706.imageshack.us/img706/3776/oldsysconnector.jpg (Old System)
http://img269.imageshack.us/img269/914/newsysconnector.jpg (New System)
*The "Internet Transaction Server (ITS)" view (Object Option)
http://img824.imageshack.us/img824/5043/oldsysits.jpg (Old System)
http://img822.imageshack.us/img822/1314/newsysits.jpg (New System)
The "User Management" View (Object Option)
http://img20.imageshack.us/img20/8646/oldsysuserman.jpg (Old System)
http://img97.imageshack.us/img97/5339/newsysuserman.jpg (New System)
The "Web Application Server" View (Object Option)
http://img101.imageshack.us/img101/6155/oldsyswas.jpg (Old System)
http://img69.imageshack.us/img69/434/newsyswas.jpg (New System)
My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
I run tcode RZ10 in backend after "Extended Maintenance"
http://img15.imageshack.us/img15/8711/oldsysrz10.jpg (Old System) (Here do not exist parameter icm/server_port_1 )
http://img512.imageshack.us/img512/9268/newsysrz10.jpg (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)
Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
also in SAP Systems, I run tcode SICF and enter in "Port Information"
http://img265.imageshack.us/img265/5281/oldsysport.jpg (Old System) (two ports)
http://img441.imageshack.us/img441/7905/newsysport.jpg (New System) (three ports)
The "Information" view (Object Option)
http://img13.imageshack.us/img13/2012/oldsysinfo.jpg (Old System)
http://img714.imageshack.us/img714/6941/newsysinfo.jpg (New System)
My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service ?
The "No Category" group (Object Option)
http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg (Old System)
http://img193.imageshack.us/img193/3800/newsysnoncat.jpg (New System) (in this System does not exist the parameter sysnr , is it correct?)
The "Permisions" Option
http://img825.imageshack.us/img825/886/oldsyspermin.jpg (Old System)
http://img243.imageshack.us/img243/2057/newsyspermin.jpg (New System)
The "Delta Link Tracer" Option
http://img716.imageshack.us/img716/798/oldsysdelta.jpg (Old System) (two levels)
http://img828.imageshack.us/img828/8057/newsysdelta.jpg (New System) (three levels, is it correct?)
the other view the same (Old Sytem and New System)
The "Connection Test" Option
http://img412.imageshack.us/img412/5789/oldsystest.jpg
http://img243.imageshack.us/img243/5237/newsystest.jpg
Edited by: Ivan Quiroz on Sep 21, 2010 12:42 PM

 Excuse me, because the message Editor has problems, I edited with html tags for best view 
 
 hi
 
 I have a SAP ECC 6.04 and sap portal 7.01
 
 When I entered in option System Administration /System Configuration /System Landscape / Portal Content Tree / Systems /SAP_ECC (System created by me)
 
 I founded the following error (in SAP Web AS Connection / Tests the connection to an SAP Web Application Server )
 
 SAP Web AS Connection
 Test Details:
 The test consists of the following steps:
 1. Checks the validity of system ID in the system object.
 2. Checks if the system can be retrieved from the PCD.
 3. Check whether a SAP system is defined in the system object
 4. Validate the following parameters: WAS protocol; WAS host name
 5. Checks if the host name of the server can be resolved.
 6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
 7. Checks HTTP/S connectivity to the defined back-end application
 
 Results
 1. The system ID is valid
 2. The system was retrieved.
 3. The system object represents an SAP system
 4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (htc-svr-erp.humantech.es:4200)
 5. The host name htc-svr-erp.humantech.es was resolved successfully.
 6. The Web AS ping service http://htc-svr-erp.humantech.es:4200/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.*
 7. An HTTP/S connection to http://htc-svr-erp.humantech.es:4200 was not obtained successfully; this might be due to a closed port on the Firewall.

 
 ...also see a red "X" near a title SAP Web AS Connection
 
 I have other system (old system). It dont have the last error, I show the properties of the "old system"(without error) and the "new system" (with error) for your analisys
 
 In "old sap system", stack java + abap
 
 <a href=http://img830.imageshack.us/img830/9755/oldsysstack.jpg>Stack Java + Abap<a>
 
 In "new sap system", stack java separated abap
 
 <a href=http://img97.imageshack.us/img97/8627/newsysstack.png>Stack Java and Stack Abap</a>
 
 In Portal
 
 In "old system", I created "SAP_HCM" System
 In "new system", I created "SAP_ECC" System
 
 The "Connector" view (Object Option)
 
 <a href=http://img706.imageshack.us/img706/3776/oldsysconnector.jpg> (Old System)</a>
 <a href=http://img269.imageshack.us/img269/914/newsysconnector.jpg> (New System)</a>
 
 The "Internet Transaction Server (ITS)" view (Object Option)
 
 <a href=http://img824.imageshack.us/img824/5043/oldsysits.jpg> (Old System) </a>
 <a href=http://img822.imageshack.us/img822/1314/newsysits.jpg> (New System) </a>
 
 The "User Management" View (Object Option)
 
 <a href=http://img20.imageshack.us/img20/8646/oldsysuserman.jpg> (Old System) </a>
 <a href=http://img97.imageshack.us/img97/5339/newsysuserman.jpg> (New System) </a>
 
 The "Web Application Server" View (Object Option)
 
 <a href=http://img101.imageshack.us/img101/6155/oldsyswas.jpg> (Old System) </a>
 <a href=http://img69.imageshack.us/img69/434/newsyswas.jpg> (New System) </a>
 
 My question of this view is: Is correct the Server port "4200" in New System? or Is correct the Server port "80+instance" in Old System?
 
 I run tcode RZ10 in backend after "Extended Maintenance"
 
 <a href=http://img15.imageshack.us/img15/8711/oldsysrz10.jpg> (Old System) (Here do not exist parameter icm/server_port_1 )</a>
 <a href=http://img512.imageshack.us/img512/9268/newsysrz10.jpg> (New System) (Here do not exist parameter icm/HTTP/j2ee_0 , is it correct?)</a>
 
 Which of these two syntax is correct? 80 + instance or 4200 (any number of port)
 
 also in SAP Systems, I run tcode SICF and enter in "Port Information"
 
 <a href=http://img265.imageshack.us/img265/5281/oldsysport.jpg> (Old System) (two ports) </a>
 <a href=http://img441.imageshack.us/img441/7905/newsysport.jpg> (New System) (three ports) </a>
 
 The "Information" view (Object Option)
 
 <a href=http://img13.imageshack.us/img13/2012/oldsysinfo.jpg> (Old System) </a>
 <a href=http://img714.imageshack.us/img714/6941/newsysinfo.jpg> (New System) </a>
 
 My question is, Why in "Old System" the parameter "Created By" is "pcd_service"? is automatic?
because the paremeter "Created by" is the user j2ee admin , I created the system manually or Should the user create pcd_service?
 
 The "No Category" group (Object Option)
 
 <a href=http://img827.imageshack.us/img827/8215/oldsysnoncat.jpg> (Old System)</a>
 <a href=http://img193.imageshack.us/img193/3800/newsysnoncat.jpg> (New System) (in this System does not exist the parameter sysnr , is it correct?) </a>
 
 The "Permisions" Option
 
 <a href=http://img825.imageshack.us/img825/886/oldsyspermin.jpg> (Old System) </a>
 <a href=http://img243.imageshack.us/img243/2057/newsyspermin.jpg> (New System) </a>
 
 The "Delta Link Tracer" Option
 
 <a href=http://img716.imageshack.us/img716/798/oldsysdelta.jpg>(Old System) (two levels) </a>
 <a href=http://img828.imageshack.us/img828/8057/newsysdelta.jpg> (New System) (three levels, is it correct?) </a>
 
 the "System Aliases" Option
 
 <a href=http://img265.imageshack.us/img265/7574/oldsysalias.jpg> (Old System) </a>
 <a href=http://img256.imageshack.us/img256/9817/newsysalias.jpg> (New System) </a>
 
 The "Connection Test" Option
 
 I based in <a href= http://img64.imageshack.us/img64/6638/essalias.jpg> ESS SAP Documentation </a>
 
 In the seven point is diference (blue box) in the <a href=http://img412.imageshack.us/img412/5789/oldsystest.jpg> (Old System) (SAP_HCM System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.) </a> and <a href=http://img243.imageshack.us/img243/5237/newsystest.jpg> (New System) (SAP_ECC System) (An HTTP/S connection to http://htc-svr-sap.humantech.es:8004 was obtained successfully.)</a>
 
 I desactivated Firewall in my SAP Server and reviewed in <a href=https://forums.sdn.sap.com/thread.jspa?threadID=946905>SAP Forums </a> my problem but nothing
 
 Could This error also could be the problem that I get an error in the JCO Destination?
 
 <a href=http://img819.imageshack.us/img819/826/oldsysjcosso.jpg>(Old System) (Succesfully)</a>
 <a href= http://img822.imageshack.us/img822/4226/newsysjcosso.jpg>(New System) (com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Issuer of SSO ticket is not authorized)</a>
 
 because I configure SSO correctly (I configured last year SSO in "Old System"),I run tcode SSO2
 
 <a href=http://img709.imageshack.us/img709/7194/oldsyssso2.jpg>(Old System)SSO2 Tcode</a>
 <a href=http://img830.imageshack.us/img830/9704/newsyssso2.jpg>(New System)SSO Tcode</a>
 
 <a href=http://img185.imageshack.us/img185/9279/newsyssso22.jpg>(Old System) SSO2 Tcode Details</a>
 <a href=http://img227.imageshack.us/img227/416/oldsyssso22.jpg>(New System) SSO2 Tcode Details</a>
 
 <a href=http://img530.imageshack.us/img530/8710/newsyslog.jpg>(New System) In the SAP Logs: *** J2EE_ADM_DA1 | USERMAPPING.USE | USER.R3_DATASOURCE.J2EE_ADM_DA1 | | systemtype=[(none)], system=["UMESystemLandscapeDummy"], uses strong encryption=[false], remote user ID=[(none)] ***
</a>

Providing system configuration info in an automated installer manifest.

In Solaris 11 Express it was possible to embed a system configuration xml file within the automated installer file. The documentation for this is here: http://docs.oracle.com/cd/E19963-01/html/820-6566/customsc.html
However this functionality seems to be missing from 11.1 at the moment. I get xml validation errors if I try to use embedded system configuration xml. Does anyone know of a way to do this? We would like to automate Solaris 11.1 installs without having to run an auto install server.

Please see the 11.1 documentation:
http://docs.oracle.com/cd/E26502_01/html/E28980/useaipart.html
System configuration profiles are no longer embedded in the AI manifest but are provided in one or more separate files.
Providing System Configuration Instructions
http://docs.oracle.com/cd/E26502_01/html/E28980/glgeh.html#ai3sc
Associating Client-Specific Configuration Instructions With Install Services
http://docs.oracle.com/cd/E26502_01/html/E28980/administer.html#gliea
Configuring the Client System
http://docs.oracle.com/cd/E26502_01/html/E28980/syscfg-1.html

Where are system preferences documented?

Where are system preferences documented? I have posted a question on this forum from time to time, or read articles in MacWorld, and often the solution to this or that is to set a particular preference, for example NSToolTipsFontSize. Is there a central place where I can find all of these preferences documented, perhaps by category?
I tried looking in XCode Help with no luck, and a Google search didn't turn up anything either.

Not really. Most default settings are documented at http://secrets.blacktree.com/ Having the Secrets prefPane installed helps with learning about them. Alternatively, peruse the hits from a google search for *defaults site:developer.apple.com*.

Post Implementation System Configuration Documentation

Similar Messages

Maybe you are looking for