Post initial Stock of Handling Units

Hi,
How i could post initial stock to Handling units in storage location that isn't HU Manager.
I tried 561 and 501 in Vlmove and Humo but didn't work,
In vlmove i have this Error "Dlv. type (dlv. catgry TP for mat. xxxxxx and BWART 561 ) cannot be determined".
In Humo 561 doesn't appear, but is in omjj.
thanks in advance.
Mary

Hi,
My HU is a fixed container like a tank, i need put stock inside this HU, directly from other system.
thanks
Mary

Similar Messages

Blocked Stock HUMO handling unit

I need a BAPI to move a handling unit to blocked stock. Does anyone know a BAPI I can use to replicate when a user selects a handling unit in HUMO then goes to "Edit" -> "Change HU Posting" -> "In Blocked Stock"? I am new at programming with SAP and do not know how to read or write ABAP. I call BAPI's remotely from external applications but I was not able to find a forum for this type of development. I hope someone will be able to assist me in this forum. Thank You

Yon can do it but it will require some programming (ABAP). Using BADI's for HUMO, you are allowed to enhance that transaction to include your own function codes and screens. You should be able to put there a function (your own) that will do a Inventory management stock move to QI, for example, for all the stock in an HU.
Hope it helps,
Leonardo De Araujo

QM Inspection stock With Handling unit (HU)

Hello,
Is there a possibility of creating a handling unit from
QM stock that has an inspection lot, from a non HU managed
Storage location, to a HU managed storage location.
Best Regards,
Itzik Eshed

Hello Maarten,
as far as I can see there are various reasons why the system behaves as described:
First of all I would check if the QM-Customizing for the inspection origin '01' is correct.
Second in the process described I would really like to know when the packing of the HUs is done. This must be done in a seperate step for the creation of the Inspection lot.
Third there is still the possibility to check if the Exit QAAT0001 is active, I would check if the coding here reflects the fact that you are using handling units.
I hope that this information can help you in this particular case.
Regards
Isabelle Britten
Senior Support Consultant

Stock Transport Order of Handling Unit

Hello All,
I create a stock transport order for a material that is packed, at the point of issuing the material out, i get the following message:
"HU item contains different data than the stock posting
Message no. HUGENERAL319
Diagnosis
The stock that is to be posted is not in handling unit .
System Response
The system cannot post this material.
Procedure
Check the accuracy of the HU and IM inventories. If they are correct, contact your system administrator about this problem."
Please how do i solve this.
thanks.

It seems in delivery one line item is not packed.Check is all the line items has the same HU location or not.If any item has different location then check is the line item related to HU location.Check all line items are packed or not in Pack box.If any thing not packed then pack and do PGI.System should allow the PGI.

URGENT DELIVERY HANDLING UNIT STATUS ERROR

Hi Experts when i am doing PGI i am getting the following error and system is not allowing to do PGI
ERROR: When trying to read the status of an object (HU 210868), a system error occurred: For object number HU0000210868 there is no status object.

Hi Ramesh,
The material is having the Packing ( Handling Units).
In delivery please do the Packing for the Materials because they have linked with the Handling Units. and Also check the wheather the Handling Units are configured properly.
For your Information please go through the Below which will help you further.
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
     Identification number
     Dimensions
     Weight
     Volume
     Status
     Materials and quantities
     Packaging materials
     Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
     Weight/Volume/Dimensions
     General data
     Means-of-transport data
     Additional data
     Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Who familiar with Handling Unit Management(HUM) module?

Hi,
It was said that if we active the HUM module in Clint level. Then the packing BOX number will not be allowed to be duplicated.
Whether this means that VEKP-EXIDV, this field will not be allowed to be duplicated??
Could anyone help my understanding on this? Thanks!
Thanks.

Hi,
HANDLING UNITS CONFIGURATION:
The SAP Handling Unit Management system allows you to manage the entire movement of the handling units and the materials they contain rather than tracking each material individually.
This paper is for the HUM Delivery although some of the contents is related to Inventory under the Logistics General modules.
Table of Contents
Objective
IMG Menu The Starting Point
Handling Unit Management Overview
Start of HUM Outbound Deliveries Manual Packing Configuration
Define Number Ranges for Handling Units
Define Packaging Material Types
Define Material Group for Packaging Materials
Define Allowed Packaging Materials
Use Handling Unit Supplements
Maintain Goods Movements for Handling Unit Stock-Posting
Define User Status Profile
Set QM Check and Delivery Type for Each Movement Type
HU Requirement for Storage Locations and Default Values for Deliveries
Packing Control By Item Category
Define Requirements for Packing in the Delivery
Delivery Type Determination
Set Unique Number Assignment for HU Identification
Number Range Maintenance for HU Identification
Define Number Assignment for Each Packaging Material Type
Delivery Output type for Packing List
Maintain the Delivery Output Determination Procedure
What else to maintain after the Manual Handling Units Configurations?
Start of the Automatic Packaging Configuration
Define Number Ranges for Packing Instructions
Define Determination Type for Packing Instructions
Define Number Ranges for Packing Instruction Determination Records
What else to maintain after the necessary Automatic Packaging Configurations?
Appendix A: How to do Manual Packing for Non-Assigned Handlings Units?
Appendix B: Scenario 1 How to do Manual Packing by Delivery Item?
Appendix C: Scenario 2 How to Manual Pack the Materials into Pallets?
Appendix D: How to do Automatic Packing?
Appendix E: How to do Goods Movement for Handling Unit Material?
Appendix F: How to Unpack the Handling Unit Material?
A handling unit is a physical unit that consists of the packaging materials (load carrier / packaging material) and the goods contained therein. A handling unit is always a combination of materials and packaging materials. All the information contained in the material items, such as batches and serial numbers, is always available by way of the handling units.
Handling units can be nested, meaning that you can also create new handling units from several handling units as often as you like.
Handling units have unique, scannable identification numbers that can be formed according to standards such as EAN 128 or SSCC.
Figure 1: Handling unit example
Structure
The handling unit object contains the following attributes:
     Identification number
     Dimensions
     Weight
     Volume
     Status
     Materials and quantities
     Packaging materials
     Packing instructions
A handling unit consists of a handling unit header and handling unit items. For identification purposes, it is given a unique number.
Handling unit header
The header data of a handling unit is divided in the following way:
     Weight/Volume/Dimensions
     General data
     Means-of-transport data
     Additional data
     Output determination procedure
For more information about each of these detailed points, see Editing detailed data for handling units.
Status
The handling unit is linked to general status management. In this way, the various physical states (planned or implemented) and other attributes (weighed, loaded, blocked or posted goods issue) of handling units can be documented.
You can use the HU_ST_INIT user parameter when you create handling units without object reference to set which initial status the handling unit is to have when it is created.
If you want to implement a status of your own, you can define a user-specific procedure for the packaging material type (see also Define Packaging Material Types).
Handling unit item
The items of a handling unit can consist of material items, packaging materials or other handling units that appear in an overview. For more information about this overview, see the Contents section of Editing detailed data for handling units.
To access the item data of an individual handling unit, select the handling unit concerned and choose Goto  Detailed HU data  Contents.
Integration
Handling units can be used in all processes within the supply chain.
Hope this will helps you and Please Reward If Really Helpful,
Thanks and Regard,
Sateesh.Kandula

Handling unit

can anybody explain handling units
-what is it's use
-how material are kept in W/H
i have gone thru help.sap but unable to understand concept
Nikhil
Edited by: nniikkhhiill on Feb 8, 2010 11:22 AM

Hi
Handling Unit Management
Purpose
You can use Handling Unit Management (HUM) to reflect packing-based logistics structures in the SAP System. Using this method, you track the movements of entire handling units and the materials they contain rather than tracking each material individually.
When you base logistics processes on handling units, goods movements processing is made easier, which in turn optimizes all logistics operations. This simplified processing includes the existing packing function in shipping and warehouse processing in the Warehouse Management system, which is expanded here.
Features
In the system, the handling unit (HU) expands on the shipping unit. Handling units can be nested, which means that you can create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique, scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in the life cycle of each handling unit, meaning that you can track the handling unitu2019s path and development at any time.
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are not working with HU-managed storage locations, you can use handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock (stock made up of packed and non-packed materials within the same storage location) is not supported. HUs can also be managed in interim storage types. Unpacking a material from an HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to this point.
Handling units are unique at client level in at least one system. Using an indicator at client level (see Unique Identification of Handling Units), you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling unitu2019s mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit function. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packing proposals defined in the system (from the packing instructions, for example).
Pl.go thorugh link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/19/7f6d36f74c7505e10000009b38f839/frameset.htm
Edited by: Sanjay Shah on Feb 8, 2010 11:32 AM

SAP Handling Unit Managment

Hi folks,
I very urgently need some documents about SAP HUM.
Can any one help me.
Laxmanan

SAP HU - SAP Handling Unit Management (HUM)
The SAP HU is used for tracking the handling units used by the materials. Some common handling units are packagings materials like cartons, pallets etc.
In the SAP system, the handling unit (HU) expands on the shipping unit. Handling units can be nested and you can also create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique,
scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in
the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
Refer to : Logistics -> Central Functions -> Handling Unit Management
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are working without HU-managed storage locations, you can work with handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types. Unpacking a material from a HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to now.
Please note that if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock.
Handling units are unique at client level in at least one system. Using an indicator at client level, you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit functionality. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packaging proposals defined in the system (from the packing instructions, for example).
Regards,
Rajesh Banka
Reward points if helpful.

Handling Unit number

Hi Gurus,
How handling unit number selection happens in delivery document?
Does system determines this number automatically? If so from which table?
Thank you
ANil

Hi Anil,
Handling Unit Management
The SAP HU is used for tracking the handling units used by the materials. Some common handling units are packagings materials like cartons, pallets etc.
In the SAP system, the handling unit (HU) expands on the shipping unit. Handling units can be nested and you can also create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique,
scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in
the life cycle of each handling unit, meaning that you can track the handling unit's path and development at any time.
Refer to : Logistics -> Central Functions -> Handling Unit Management
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are working without HU-managed storage locations, you can work with handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types. Unpacking a material from a HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to now.
Please note that if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock.
Handling units are unique at client level in at least one system. Using an indicator at client level, you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling unit's mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit functionality. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packaging proposals defined in the system (from the packing instructions, for example).
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Provide information about handling units

Plz provide information about handling units. Explain all the paths and information about HU.

Hi,
Purpose
You can use Handling Unit Management (HUM) to reflect packing-based logistics structures in the SAP System. Using this method, you track the movements of entire handling units and the materials they contain rather than tracking each material individually.
When you base logistics processes on handling units, goods movements processing is made easier, which in turn optimizes all logistics operations. This simplified processing includes the existing packing function in shipping and warehouse processing in the Warehouse Management system, which is expanded here.
Features
In the system, the handling unit (HU) expands on the shipping unit. Handling units can be nested, which means that you can create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique, scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are not working with HU-managed storage locations, you can use handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock (stock made up of packed and non-packed materials within the same storage location) is not supported. HUs can also be managed in interim storage types. Unpacking a material from an HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to this point.
Handling units are unique at client level in at least one system. Using an indicator at client level (see Unique Identification of Handling Units), you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit function. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packing proposals defined in the system (from the packing instructions, for example).
Regards
Adarsh Mathur

Batch management & Handling unit management?

Dear Expert,
could you explain Batch management & Handling unit management?
thanks
saravanakumar.

<b>HU:</b>
The SAP HU is used for tracking the handling units used by the materials. Some common handling units are packagings materials like cartons, pallets etc.
In the SAP system, the handling unit (HU) expands on the shipping unit. Handling units can be nested and you can also create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique,
scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in
the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
Refer to : Logistics -> Central Functions -> Handling Unit Management
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are working without HU-managed storage locations, you can work with handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types. Unpacking a material from a HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to now.
Please note that if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock.
Handling units are unique at client level in at least one system. Using an indicator at client level, you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit functionality. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packaging proposals defined in the system (from the packing instructions, for example).
For more help follow the link
http://www.sap-img.com/shop/sap-handling-unit-management-configurations.htm
Batch:
In various industries particularly the process industry you have to work with homogenous partial quantities of a material or product throughout the logistics quantity and value chain.
There are various reasons for this:
Legal requirements (for example, the guidelines set out by GMP (Good Manufacturing Practice) or regulations on hazardous material
Defect tracing, callback activities, and regression requirement
The need for differentiated quantity-and value-based Inventory Management (for example, due to heterogeneous yield/result qualities or varying constituents in Production.
Differences in usage and the monitoring thereof in materials planning in SD and Production.
Production or procedural requirements (for example, settlement of material quantities on the basis of different batch specifications).
For more help you have to refer the SAP help

Create Handling unit after receiving finished goods

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Dear
Please Follow this Steps
Process Cycle:
1)Create Material with WM View in Material Master (MM01)
2)Crearte Purchase Order(ME21N) consult MM
3)Release Purchase Order(ME29N, ME28)
4)Goods Receipts (MIGO)
5)Creating Transfer Request (note:- this will come Automatically while doing G/R)
6)Create Transfer Order (LB13)
7)Confirm Transfer Order (LT12)
10)Check Stock Overview in Warehouse (LS24)
Goods Issue Process from Warehouse:
1)Create Reservation (MB21)
2)Goods Issue W.R.T Reservation (MIGO)
3)Create Transfer Order (LT06)
4)Confirm Transfer Order (LT12)
After Doing all This Steps In MMBE At Stock Requirement List Click on the Selected Stock and Right Click u can See the WM stocks And Handling Unit
with Regards
Pushpalas

Initial stock entry MB1C with 561

Hi,
I am sure this is a very basic question. Please help in resolving and if possible provide the process details.
I am trying to post initial stock entry for the warehouse managed storage location. NOw the stock is in the interim storage are 998 with AUFNAHME as the storage bin created over there.
How to i move this stock to the particular storage bin in the storage location from interim storage area in this case? What is the procedure with respect to TR & TO?
Regards
RJS

You need to create a transfer order to move the stock from 998 storage type to the storage type you want.
Assuming 561 movement has not created a TR (the standard configuration does not), you can use TCode LT10 to select the stocks and putaway in foreground. Then put the destination storage type and other details. Your TO will be created with 999 movement (default on the main screen).
You can then confirm the TO using LT12.
Regards,
Aroop

Error:Assign handling Unit from one Process order to another process order

Hi Experts,
I am facing different issues in assigning handling unit from one process order to another.
Business process:
1. Two similar Process Orders are existing in the system
2. Delivery is created for first process order using LP10 for one or more components
3. TO is created in foreground using VL06P
4. TO is confirmed by providing in stock available Handling Unit (HU) / storage Unit details Using LT12
5. Customized transaction is used to reassign newly created HU (created in previous step) from first process order to second process order. As a result many steps are performed in background for delinking the HU from first process order to second process order (including creation of different TOs)
I am facing different issues in the process:
1. Sometimes while confirming the TO in step 4: error is received as "Reservation item 0065 with material 4013959300300 does not exist" OR "Reservation item with material does not exist"
2. If the TO is confirmed in step 4. I am facing error in step 5 as "Warehouse number does not exist (new selection required)"
Both these errors are standard errors and I could not find much information on them in SCN also.
If anyone can throw light on any of them then it would be great.
Please let me know if any additional information is required.
Thanks
Harsh Aggarwal

Hi Manish
Thanks for your response. Actually, the customized program is used only in fifth step and not till TO confirmation so that error is not related to Customized program. However, in some cases I am able to do the confirmation but the error is received in 5th step i.e. Warehouse number does not exist (new selection required)"
Any further guidance you can provide. I will ask ABAP to check the customized program but the error seems to be a standard error.

Setting Quality Inspection to use Handling Units

I would like to know if anyone understands the procedure for setting up quality Inspection using Handling Units. I need to setup sampling procedures, use skip strategies, etc.
If someone can let me know a clear way to se this up in Native SAP, that would be a great help.
More specifically, how to perform Sample Calculation using Sample Management and sample-drawing procedure
Thanks.
Edited by: RGSAP2008 on Apr 15, 2010 8:42 PM
Edited by: RGSAP2008 on Apr 15, 2010 8:50 PM
Edited by: RGSAP2008 on Apr 15, 2010 8:51 PM

I've only worked with HU's in QM for a brief while but there isn't a ton difference with or w/o HU's. The sampling procedures, sample drawing, etc.. work about the same.
The UD posting screen is different and you post by the individual handling units, not by UOM.
For QM you basically just need to click on the HU indicator in the insepction type setup in the material master. You'll find the "Insp. Ctrl" field doesn't work as it normally does. Most of the selections in there don't work. Early lot creation does work if I remember but the other ones don't. Each GR of handling units against a production order will result in an additional inspection lot.
FF

Post initial Stock of Handling Units

Similar Messages

Maybe you are looking for