Blocked Stock HUMO handling unit

I need a BAPI to move a handling unit to blocked stock. Does anyone know a BAPI I can use to replicate when a user selects a handling unit in HUMO then goes to "Edit" -> "Change HU Posting" -> "In Blocked Stock"? I am new at programming with SAP and do not know how to read or write ABAP. I call BAPI's remotely from external applications but I was not able to find a forum for this type of development. I hope someone will be able to assist me in this forum. Thank You

Yon can do it but it will require some programming (ABAP). Using BADI's for HUMO, you are allowed to enhance that transaction to include your own function codes and screens. You should be able to put there a function (your own) that will do a Inventory management stock move to QI, for example, for all the stock in an HU.
Hope it helps,
Leonardo De Araujo

Similar Messages

Post initial Stock of Handling Units

Hi,
How i could post initial stock to Handling units in storage location that isn't HU Manager.
I tried 561 and 501 in Vlmove and Humo but didn't work,
In vlmove i have this Error "Dlv. type (dlv. catgry TP for mat. xxxxxx and BWART 561 ) cannot be determined".
In Humo 561 doesn't appear, but is in omjj.
thanks in advance.
Mary

Hi,
My HU is a fixed container like a tank, i need put stock inside this HU, directly from other system.
thanks
Mary

QM Inspection stock With Handling unit (HU)

Hello,
Is there a possibility of creating a handling unit from
QM stock that has an inspection lot, from a non HU managed
Storage location, to a HU managed storage location.
Best Regards,
Itzik Eshed

Hello Maarten,
as far as I can see there are various reasons why the system behaves as described:
First of all I would check if the QM-Customizing for the inspection origin '01' is correct.
Second in the process described I would really like to know when the packing of the HUs is done. This must be done in a seperate step for the creation of the Inspection lot.
Third there is still the possibility to check if the Exit QAAT0001 is active, I would check if the coding here reflects the fact that you are using handling units.
I hope that this information can help you in this particular case.
Regards
Isabelle Britten
Senior Support Consultant

Handling Unit Block and Unblock

Hi,
I have requirement to block and unblock Handling Unit or Storage Unit in warehouse management. How to block and unblock the
Handling Unit with the function module and what is the table where I can see the blocking status of
the Handling Unit .
I tried a lot before posting here with no luck.
Thanks...

Dear Sridhar,
I hope I get you right.
To change the status of handling unit to blocked stock, do the following:
- transaction code VLMOVE
- above select procedure "0023" --> Posting chance from unrestricted use stock to blocked stock (movement type 344)
- then enter handling unit number
- press enter --> you get new line item with this HU number below
- select this new line item --> post document
- on the next screen you get the number of material document just created
- now the handling unit is blocked
- to unblock it later - use another VLMOVE procedure
Table where you can see this status:
- check table LQUA (warehouse quants)
- enter the WH number and quant number (you get this one if you check details of the quant in bin) --> you get record for exactly this handling unit
- see field LQUA-BESTQ (equals S - blocked stock)
Hope this will be of any use.
Regards,
Primoz

SAP Handling Unit Managment

Hi folks,
I very urgently need some documents about SAP HUM.
Can any one help me.
Laxmanan

SAP HU - SAP Handling Unit Management (HUM)
The SAP HU is used for tracking the handling units used by the materials. Some common handling units are packagings materials like cartons, pallets etc.
In the SAP system, the handling unit (HU) expands on the shipping unit. Handling units can be nested and you can also create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique,
scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in
the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
Refer to : Logistics -> Central Functions -> Handling Unit Management
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are working without HU-managed storage locations, you can work with handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types. Unpacking a material from a HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to now.
Please note that if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock.
Handling units are unique at client level in at least one system. Using an indicator at client level, you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit functionality. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packaging proposals defined in the system (from the packing instructions, for example).
Regards,
Rajesh Banka
Reward points if helpful.

Handling Unit number

Hi Gurus,
How handling unit number selection happens in delivery document?
Does system determines this number automatically? If so from which table?
Thank you
ANil

Hi Anil,
Handling Unit Management
The SAP HU is used for tracking the handling units used by the materials. Some common handling units are packagings materials like cartons, pallets etc.
In the SAP system, the handling unit (HU) expands on the shipping unit. Handling units can be nested and you can also create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique,
scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in
the life cycle of each handling unit, meaning that you can track the handling unit's path and development at any time.
Refer to : Logistics -> Central Functions -> Handling Unit Management
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are working without HU-managed storage locations, you can work with handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types. Unpacking a material from a HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to now.
Please note that if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock.
Handling units are unique at client level in at least one system. Using an indicator at client level, you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling unit's mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit functionality. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packaging proposals defined in the system (from the packing instructions, for example).
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Create Handling unit after receiving finished goods

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Dear
Please Follow this Steps
Process Cycle:
1)Create Material with WM View in Material Master (MM01)
2)Crearte Purchase Order(ME21N) consult MM
3)Release Purchase Order(ME29N, ME28)
4)Goods Receipts (MIGO)
5)Creating Transfer Request (note:- this will come Automatically while doing G/R)
6)Create Transfer Order (LB13)
7)Confirm Transfer Order (LT12)
10)Check Stock Overview in Warehouse (LS24)
Goods Issue Process from Warehouse:
1)Create Reservation (MB21)
2)Goods Issue W.R.T Reservation (MIGO)
3)Create Transfer Order (LT06)
4)Confirm Transfer Order (LT12)
After Doing all This Steps In MMBE At Stock Requirement List Click on the Selected Stock and Right Click u can See the WM stocks And Handling Unit
with Regards
Pushpalas

Error:Assign handling Unit from one Process order to another process order

Hi Experts,
I am facing different issues in assigning handling unit from one process order to another.
Business process:
1. Two similar Process Orders are existing in the system
2. Delivery is created for first process order using LP10 for one or more components
3. TO is created in foreground using VL06P
4. TO is confirmed by providing in stock available Handling Unit (HU) / storage Unit details Using LT12
5. Customized transaction is used to reassign newly created HU (created in previous step) from first process order to second process order. As a result many steps are performed in background for delinking the HU from first process order to second process order (including creation of different TOs)
I am facing different issues in the process:
1. Sometimes while confirming the TO in step 4: error is received as "Reservation item 0065 with material 4013959300300 does not exist" OR "Reservation item with material does not exist"
2. If the TO is confirmed in step 4. I am facing error in step 5 as "Warehouse number does not exist (new selection required)"
Both these errors are standard errors and I could not find much information on them in SCN also.
If anyone can throw light on any of them then it would be great.
Please let me know if any additional information is required.
Thanks
Harsh Aggarwal

Hi Manish
Thanks for your response. Actually, the customized program is used only in fifth step and not till TO confirmation so that error is not related to Customized program. However, in some cases I am able to do the confirmation but the error is received in 5th step i.e. Warehouse number does not exist (new selection required)"
Any further guidance you can provide. I will ask ABAP to check the customized program but the error seems to be a standard error.

Batch management & Handling unit management?

Dear Expert,
could you explain Batch management & Handling unit management?
thanks
saravanakumar.

<b>HU:</b>
The SAP HU is used for tracking the handling units used by the materials. Some common handling units are packagings materials like cartons, pallets etc.
In the SAP system, the handling unit (HU) expands on the shipping unit. Handling units can be nested and you can also create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique,
scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in
the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
Refer to : Logistics -> Central Functions -> Handling Unit Management
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are working without HU-managed storage locations, you can work with handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types. Unpacking a material from a HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to now.
Please note that if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304. If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock.
Handling units are unique at client level in at least one system. Using an indicator at client level, you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit functionality. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packaging proposals defined in the system (from the packing instructions, for example).
For more help follow the link
http://www.sap-img.com/shop/sap-handling-unit-management-configurations.htm
Batch:
In various industries particularly the process industry you have to work with homogenous partial quantities of a material or product throughout the logistics quantity and value chain.
There are various reasons for this:
Legal requirements (for example, the guidelines set out by GMP (Good Manufacturing Practice) or regulations on hazardous material
Defect tracing, callback activities, and regression requirement
The need for differentiated quantity-and value-based Inventory Management (for example, due to heterogeneous yield/result qualities or varying constituents in Production.
Differences in usage and the monitoring thereof in materials planning in SD and Production.
Production or procedural requirements (for example, settlement of material quantities on the basis of different batch specifications).
For more help you have to refer the SAP help

Problem in 301 Stock transfer via VLMOVE for Handling Unit movement

Hi Gurus
I am having one issue, where handling unit is active. So user facing one issues that user has posted the stock around 10 qty , after some material movements , stock showing as 9 in MMBE , where as checking the handling units showing 10 In HUMO . Now user wants to do the stock transfer 301 via VLMOVE. But system is giving error message like u201Cdeficit of stock, handling units can't be movedu201D, anybody advise is there anyway how user can do this transaction.
Regards
Edited by: venkat g on Aug 19, 2010 1:03 PM

Hi,
The solution for creating inbound delivery that you people have suggested is already in place. The problem is not with creation of inbound delivery but with assigning the material HUs to the inbound delivery. As material HUs are having status assigned to Shipment Document which is created after outbound delivery is processed. How should I go about it? Even after status of shipment document is made complete, assignment of HUs to inbound delivery is not possible. Please help to resolve this issue.
Thanks and regards,
Sudhir Dahake

How to change stock category of handling units at mass level without Development

Hi,
     We have hundreds of handling units with stock category "blank" in our returned stock storage location which is HU managed. MMBE shows different
     value in Return stock what we see in HUMO is only One HU with very less qty. visible with stock category "R".inventory stock is different than the
      HU stock visible in HUMO
     can some one help in explaining how can we change the stock category of HU's from Blank to R. is there any standard process offered by Sap.
     Development of program to get it done is out of scope right now
     Thanks,

i am struggling to figure this out too.right now we if i look into MMBE i see the returned stock
value.but HUMO does not show any handling units with stock category R when searched
though Storage location is HU managed.i suspect user has done GR without delivery which cause the dependency.
Thanks for quick response.

Any other Transaction similar to HUMO for retriving handling units .

Hi SAP GURUS ,
Please accept my thanks for the help rendered so far .
I have a Quary ,Do we have a Transaction parallel to HUMO for retrieving Handling units from stocks .
similar to HUMO .
Thanks in Advance !!!
Adarsh

Hi ,
Thanks for your reply , but the retrieval of HU's via HUMO is showing LIst of HU's which is otherwise not possible othrewise
The easy option if the report doesnt show up once you execute is ,go for Radioa button Quick search and you will get the report
After havign raised this issue with SAP ,they have suggested us to for varients including combination of plant /material/ and storage location
otherwise ,we can as well archive the very old /unused hU's so that the report retrival through HUMO will be fast
Incidentally there is no other way except HUMO
Thanks for the reply
warm regards,
Adarsh

Stock Transport Order of Handling Unit

Hello All,
I create a stock transport order for a material that is packed, at the point of issuing the material out, i get the following message:
"HU item contains different data than the stock posting
Message no. HUGENERAL319
Diagnosis
The stock that is to be posted is not in handling unit .
System Response
The system cannot post this material.
Procedure
Check the accuracy of the HU and IM inventories. If they are correct, contact your system administrator about this problem."
Please how do i solve this.
thanks.

It seems in delivery one line item is not packed.Check is all the line items has the same HU location or not.If any item has different location then check is the line item related to HU location.Check all line items are packed or not in Pack box.If any thing not packed then pack and do PGI.System should allow the PGI.

Project-Stock Handling units using HUPAST

Hi folks,
we want to use handling units with project stock (SOBKZ = Q). While it's easy to create handling units on project stock with HU02 it does not seem to be possible with HUPAST. System does not allow the edit the field SOBKZ in HUPAST.
Does anybody know how to create handling units with batches from project stock using the transaction HUPAST?
Thanks BR
MAtthias

Hi
You cann't do GR wid mvtType 101 for HU
you can do it through only vl01n
VLMOVE you can do .
Regards
Aryan
Don't forget to give points

Material to Material stock transfer betn Handling Unit to nonhandling Unit

Hi Experts,
Pls explain step by step procedure to Material to Material stock transfer betn Handling Unit to nonhandling Unit.

Hi,
You have several options. In case you use the Stock Transport order scenario, you simple pick and pack in the HU managed SLOC and PGI. You PGR in the non HU managed SLOC. HU's are not taken into consideration. If you would use inbound deliveries, you can have the HU's copied from the inbound to the outbound delivery but still you dont do anything with the HU in the non-HU SLOC.
You can also use tcode VLMOVE, if your HU managed SLOC is not connected to a WM. You do a 311 posting which creates a posting change delivery. After PGI the HU is moved from SLOC 1 to SLOC 2.
MdZ

Blocked Stock HUMO handling unit

Similar Messages

Maybe you are looking for