Post of Excise Invoice(Capture through EWPO)

Hai,
I am getting error when i am posting the excise document(Capture through EWPO)
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 76,632.00' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please give me the solution for above error
Regards,
Ramu

hi,
please check that while simulating do it is debiting to both onhold account and clearing account.
if it is,
then goto to spro> logi gen> tax on goods movt> basic setting>account determination per excise transaction
in that
search for EWPO and delete the line of onhold account .
Please COnfirm if that works,
Regards,
Vijay

Similar Messages

Wrong entry posted in Excise Invoice.

Dear All,
We are in now golive stage and I found one issue regarding the post the excise invoice for capital material.
Issue is- I create one purchase order for capital material through account assignment category F (Internal order)
While doing GR through 101 movement type and after that post the excise invoice in J1IEX,accounting entries showing correct.
But same PO while doing GR through 103 and capture excise invoice and then 105,after that post excise invoice in J1IEX, accounting entries showing wrong.It's shows reverasal entries.
Please suggest any soluation.I check from my side all config is correct.
Thanks & regards,
Vinay Patel

Hello,
Thanks for your valuable replay. Is it any SAP note for that?
Regards,

Text in accounting document posted against Excise invoice

Hi,
We have a requirement that the accounting document posted against excise invoice ( J1IEX) should display a text ( Vendor name and PO No.).
We have tried entering the text at the time of capture and posting the excise invoice.But this does not reflect in the accounting document text field.
However we can maintain the same afterwards from transaction FAGLL03.
Is there any option that we can maintain the same at the time of capturing and posting the excise invoice.
Also,if I think of defaulting the same ( Vendor name and Po no) is ther any user exit OR BAPI.
Rajesh

hi
yes is their in this go to spro->img->Logistics - General->Tax on Goods Movements->India->Basic Settings->Maintain Excise Groups
in this for your excise group in *migo settings please put the tick mark in post ei in migo the at the time of migo only the excise invoice will be posted. no need of doing the ji1ex here.
Thanking you

Excise invoice capture process

Hi,
I want to know about excise invoice capture process for depot plant which t. cod eis use for depot plant how to do the part1 and part2 and also reversal process for the same.
also what is diff. between excis einvoice capture process for depot and non depot plant.
regards,
zafar

Hi Zafar,
There are no part 1 and part 2 in RG23D for depot scenario. You can update RG23D at the time of MIGO or J1IG "Capture excise invoice for depot".
For cancelling you can use the same transaction. And to send the goods out from Depot plant use T-code J1IJ for updating RG23D.
Rest process remains the same Extraction J2I5 and print through J2I6.
BR

Cancellation & JV of Excise invoice generated through J1IS

Dear Friends,
We have a requirement to cancel the outgoing excise invoice created through the transaction J1IS towards purchase return.
I believe through J1IS, cancellation of the excise invoice is made possible but no accounting document get posted. Only the status is being changed from 'Posted' to 'Cancelled'.
While doing the JV through the Transaction J1IH => Cancell Exc Inv, system is giving error message as follows:
"Excise modvat accounts not defined for CEIV transaction and excise group".
In the customisation, all the relevant GL accounts are found maintained against transaction type CEIV.
For example at the time of outgoing excise invoice posting through J1IS following accounts hit.
13113920     CENVAT clearing     8
13113920     CENVAT clearing     771
13113920     CENVAT clearing     15
13113900     CENVAT Payable     - 8
13113900     CENVAT Payable     - 771
13113900     CENVAT Payable     - 15
We would like to have an opposite entry through the transaction code J1IH => Cancellation of Exc Inv.
Kindly give a suitable solution to make the cancellation.
Thanks.
Harikrishnan.

Hi Hari,
Do the blw option
whenever you are trying to cancel the Excise Invoice generated by J1IS/J1IV , Use J1IH-> Cancel Excise Invoice> you have to give the Official Excise invoice no. which is generated by J1IV for cancellation
and ref the sdn thread with same issue
How to cancel excise invoice which is created through t.code J1is
Cancel J1IS Excise Invoice

Editing base value or excise duty during Posting of Excise invoice

Hi,
System is getting greyed out and not allowing to change the base value or Excise duty values during posting of excise invoice, where as it is allowing during capturing the excise invoice. How to change this?
We require facility during posting. Is it possible?
Regards,
Sattuj

Hi,
Please maintain the Assessable Value in J1ID for the material and also maintain the condition records for your excise conditions such as BED, ECS & SHECess in FV11 and try.
Thanks & Regards,

Excise Invoice Capture for remaining item

Hello All,
I have one query, i have captured the excise invoice in MIGO, now while posting I came to kno that there are 5 items in the excise invoice, whereas in the captured excise invoice in migo there are 4 items (excise details for 1 item were not maintained). now if I add the duty of the remaining item in the other items, the same duties will flow to MIRO and also the excise duty for the 5th item will also come in MIRO. if I dont post the excise invoice for the one item which i have not captured, I am not able to take the credit for that item in the excise invoice.
Please guide me how to proceed.
regards
Ashish

Hi,
U can do the following-
-capture the excise invoice for 4 items and post it.(say excise invoice no is 123)
-capture the excise invoice for 1 item with excise invoice no say 123# also post the same.
-then do the MIRO for vendor u will get the total duties as well as excise amount values.
regards,
sujit borse

Excise Invoice Capturing thru Material Document

Hi Gurus,
When i am trying to capture Excise Based on Material document i am getting a Error
"PLA-AT2 amount 18.05.2009 is greater than available amount".
How to rectify.
Thanks in advance
Ganapathy.V

Hi Vikas,
I made a PO for a material with excise.
At the time of GR i have not recd the Excise Copy from the Vendor.
So i made the GR by Selecting create with Excise Entry.
Now i rece the Excise Copy.
I want to do the part 1-Capturing of Excise in J1iex Capture Excise
After that my Excise department will Check and Post the Part2 in J1iex Post the Excise invoice.
This is the Scenario.
Now i am getiing the Error in Capturing Stage.
Tks/Rgds
Ganapathy.

Trading excise invoice capturing.

hi everyone,
i want to know the process how to caputre the trading excise invoice capturing in sap where the excise duty is unknown and non standard. such senerio's how map in sap.
rgs
santosh

hi
First stage dealer
This is Traders pass-on scenario.
E.g.:
Material Price = 80/-
Excise Duty = 14/- (BEDECessSECess)
Margin = 6/-
Total =100/-
VAT @3% = 3/-
Grand Total =103/-
above calculation will be unknown at time of PO creation
check following steps
Step 1:
Create PO with Base Price as 100/- by selecting tax code which is having VAT as 3% (Total PO value will be 103/-)
Step 2:
Post MIGO and Capture Excise Part - 1
Click on More details icon in Excise tab (header), check MRP Indicator in miscellaneous tab, Enter Assessable value as 80 in Excise tab Item level and enter the excise values BED, ECess , SECess manually, check & save the document.
Step 3;
Post Excise Part 2 in J1IEX
Step 4:
Post MIRO by checking calculate tax, edit base value as 80/- enter the amount in header as proposed by the system (103/-), simulate & post the document.
regards
KI

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Accounting documents are not posted for Excise invoice

Hi,
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
2. where we will maintain number ranges for excise invoice..?
Thanks
Rao..

hi
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
Not sure but can u try to relese this to accounting
2. where we will maintain number ranges for excise invoice..?
Excise invoice number range is depend on Excise series group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Check the link
Re: Excise Invoice Number Range
excise invoice and domestic invoice sharing same number range

Excise invoice capture process for dealer invoice

Hi,
As I read in many thread, that for the capture of excise invoice for dealed invoice in Po for item we have to maintain the base price as addition of both base value + excise duty amounts, then using MRP indicator we have to capture the duty amounts for dealer invoice but I have some query, when delaer make the invoice . they pass on the duty, even the duty amount is not intially known which excise invoice amount the delaer will pass, so while creating PO, How we can exactly enter he amount as BASE VALUE + DUTY amount, we have to chnage the the PO or without changing PO amount we can proces for capture of excise duty also in PO which tax code should be select , if we seelct the regular tax code which we use for excise invoice capture for other supplier then system will calculate the tax amount in the PO also, so which tax code should be calculate.
regards,
zafar

At the time of Po creation we will be knowing the duties which he will be passing you, but you will be not knowing the base price of material ,as vendor will add his amount also into the original base price and apss the invoice.
So will be creating the PO as original base price and excise only , but at the time of GRN he will add his profit into the base price and will give supply the material, so you need to change the base price while GRN to match the excise duties and tick the MRP indicator so that at time of miro the duties will flow correctly.
Hope this may help you.
BR,
Patil

Is it possible to post the Excise invoice previous month date.

Dear All,
We want to post a excise invoice with previous month date. Is that possible?
We have created a billing document (VF01) last month (October) and not created Excise Invoice (J1IIN).
Now our finance people requirement is to create the excise invoice with last month date.
Kindly let me know whether it is possible.
Regards,
Mullairaja

Yes quite possible provided your FI period is still open. Once you execute J1IIN and clicked the tab "Billing", you can see a field Posting Date where you maintain the billing document date itself if FI period is open.
But from excise point of view, this is wrong due to the fact that excise returns should be submitted on or before 3rd of every month in which case, the excise team would have submitted the returns for October.
thanks
G. Lakshmipathi

Error while posting Vendor Excise Invoice

Hi
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 18.16' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Kindly give the solution
Regards
Pratap

Hi all,
There is no excess amount in the transaction.
IN Po Excise value@8%: 1,815.88
Ecess@ 2% on EXcise:36.32
HecesL:1%: 18.16
This is how it is.
Before this i have posted one thread on Part I does Not Exist, based on this i was in the forum and i found in one thread to cancel the GR and cancel the Excise Invoice if Part II has not been posted.
When i have done this it has given me one message that Reverse the availed Cenvat Credit - basing on this i am trying to post Vendor Excise Invoice and then i have to cancel the Internal Invoice.
This is what i have done.
So kindly let me know where i am wrong.
Regards
Pratap

Automatic posting of excise invoice in case of deemed export

Hi All,
We have a scenario of Deemed export.
Our client want automatic posting of excise invoice at the time of billing for all scenario.
Its working fine for domestic and export sales. But in case of deemed export system is not picking the correct excise invoice type.
I have maintained settings in Defaulf setting for excise group and series group. For deemed export i have used separate shipping point also.
Request you to guide in this case.
Its urgent.
thanks in advance.
Full points will be awarded to all answers.
Kind regards,

Dear Ravi
As you would be aware as for as generation of excise invoice is concerned, it is based on series group. So have you maintained a seperate series group for deemed export. If so, once again check in Default Excise Group and Series Group that you have assigned the new series group to your sales area.
Since also you said that it is working fine for domestic and exports, it is always better to compare the settings with the one for Deemed exports. I feel somewhere the settings is missing for deemed exports.
thanks
G. Lakshmipathi

Post of Excise Invoice(Capture through EWPO)

Similar Messages

Maybe you are looking for