"Post of the Week" post

I miss reading the "Post of the Week" post. I always lked to see who made it in the post.
Haven't seen one in a while.

Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

Similar Messages

PO process by interface was wrongly GR posted.automatic the GR

Hi Gurus,
PO process by interface was wrongly GR posted.automatic the GR posting didn't registered the correct amount of the PO for the line item ($1746) but for less ($1) is posted.automatic GR posted with a wrong/different amount from line item.
We are canceled GR and post it again looking for system to recognize it correctly but this was useless.after GR posted for I$ DOLLAR,we are posted IR doc also.Im still pending for analysis of the reason why this GR was wrongly posted,your instructions and explanation of situation appreaciated.please help me.
Regards
SAP MM

Hi,
Check the tolerance limits defined in IMG under
Materials Management -> Inventory Management and Physical Inventory -> Goods Receipt -> Tolerance Limits
Also, check "over delivery" and "under delivery" tolerances defined in Material Master under "Purchasing" view.
Also check in IMG under
SAP Netweaver -> General Settings -> Currencies -> Define rounding rules for currencies
For the company code/currency combination for which payments are to be made not in the smallest denomination, but in a multiple of it, enter the currency unit (rounding unit) to which amounts are to be rounded.
This ensures that the amounts in this currency are always rounded to this unit (providing the amounts you enter manually are also rounded in line with your entry). The payment program evaluates your entries to determine the cash discount and rounds off the amount accordingly.
Regards,
Srilatha.

How to revrse the documnt posted through the Depreciation run AFAB

Hi,
Please advise, how to revrse the documnt posted through the Depreciation posting using tcode AFAB.
Thanks & Regards
Jai

Hi JayChandra
Hope I gave my reply vide your earlier todays thread Re: How to reverse the document posted through AFAB(Depreciation run)
Please check The answer is
You can not reverse
Make your correct changes in Asset Master/Depreciation data and rerun AFAB
System posts the difference

Can't Post in the User Tips Library

Hello,
I just recently achieved Level 2 ranking status in the forums. For some weird reason, I can't post in the Tips Library. I click on 'Post New Topic', and it asks me to log in. I had already logged in, but I do it anyway. I type in my password, and click Log In. I am back in the Tips Library, and now logged in. When I click 'Post New Topic' again, it asks me to log in again, although I am already logged in! It is an endless circle.
I really want to contribute!
~Christoph

Christoph * wrote:
The post must be approved by Apple before it is posted. What are they looking for when they approve these posts?
Accuracy. Before allowing a post to be considered a valid answer to a frequently asked question about using Macs, Apple wants to make sure it is actually a correct answer and an appropriate solution to whatever technical problem is being addressed.
Also, why do I see only a few posts in the User Tips Contributions forum?
Once the Hosts have approved a user contribution, it is removed from Contribution forum...
Why do I see people's post in the main User Tips Library but yet you said
No one can post there
The approved posts are moved to the User Tips Library. In other words, you can't post there; the Hosts move your approved tip to that forum.
Read through the steps explained in the section titled "The Process" on both pages. It explains this in detail.
\[Edit: I took ages editing my post and Niel beat me to it. I'll leave my post in case it helps clarify anything. :-)]
Message was edited by: Rachel R

Not taken to the last post...

When I want to report spam, I use a bookmark that takes me to the first message in the Spam forum. If I click on the "Reply" button of this first message, I get the box for writing my report, but the "last" message above it is #49. not the #282 which is the last at the time of wrinting this:
When posted, my report appears where it should, but this is annoying. I have observed this for some time now -at least for some weeks- but I had not noticed how annoying it is until Sunday, when I had to post many times there.
This happens in Firefox/Mac, but I have just checked and it also happens in Safari/Win 7. And it also happens in other long threads: trying to reply to their first message takes me below message #49, not below the last.
Also, if I click on the Latest Reply button instead, I am at least taken to the last page of the thread, but not to the last message.
Anyone else?

Noel Carboni wrote:
To be honest, I don't get there the way you do, and maybe others don't either. I make the Discussions tab my default and click on the time in the Last Post column to get to the end directly.
-Noel
I think I'm not following you. In your previous thread you said
I followed your instructions exactly and used the Reply button inside the thread on the first post, and yes, I was taken to the bottom of the first page, just as you describe.
And this is exactly the problem I am reporting. I haven't said that I get the same effect whatever means I use to try to go to the last message. I do get it when I use a way that I have been using for years: to use a bookmark to go directly to the Spam thread (instead of looking for it in the list of threads, as many times it is necessary to scroll down to get at it), and to click on the Reply button of its first message.
Incidentally, I get the same problem if I go to the Spam thread by using the link provided at the top of the list of topics in this forums. And yes, I also use the Discussions tab by default.

Remove all the "Moved" posts from the Welcome & FAQ forum

Could someone please clean up those unsightly "Moved" posts from the Welcome & FAQ forum?

I deleted them all since the most recent was several weeks old. That doesn't, however, mean that more won't be added as questions are mistakely placed there and then moved to the proper board. Perhaps your earlier suggestion of locking it as an announcement-only board is one that we should consider.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

785GTM-E45 not POSTing after a week (Need help)

Hello guys and girls,
Good day to you.
I am new here as I just happily purchase my new MSI motherboard last week. Yay~
However, I am now currently facing problem in POSTing the PC after it was working beautifully for a week. Hope someone can help me as I have exhausted my testing/diagnostics options.
Some other infos that might be informative :-
1.) APS LED does not light anymore.
2.) No longer have successful POST beep anymore. (CPU Cooler comes on though)
3.) Of course the black screen.
4.) The last boot time, I remember seeing CMOS related error in the POST screen. After that loaded into Windows XP 32bit and I restarted the PC. Then the No POST happened.
My PC hardware components :-
CPU: Athlon X2 5000 (2.2GHz)
Motherboard: MSI 785GTM-E45 (ver 1.4) (No idea on how to check the BIOS as I can't even POST now)
RAM: I have 4 units working memory that I have tested to be working in this motherboard before it is not POSTing.
a.) Kingston DDR2 667MHz (KVR667D2N5/2G) [1 Stick]
b.) Mushkin DDR2 800MHz [1 Stick]
c.) Corsair Dominator DDR2 1066MHz 2x1GB Kit [2 Sticks] (using this one as the main before it failed to POST)
Graphics: Using onboard
PSU: Seasonic S12D 750W
a.) +3.3V = 24A ; +5V = 30A. (150W)
b.) +12V Combine = 62A (744W)
c.) -12V = 0.8A (9.6W)
d.) +5Vsb = 3A (15W)
Diagnostics that I have done :-
1.) Checked whether the motherboard is touching the casing which will ground it. The motherboard is screwed on the standoffs with a 1.5cm away from the case. Checked the motherboard edges, not touching the casing either. Checked whether is there any screws that are short-circuiting the motherboard, nothing there as well.
2.) Unplug the HDD and ODD. No POST as well. Plugged the HDD and ODD to another computer, it works.
3.) Triple checked the power connections in the PC. No POST. After that plugged my Seasonic PSU to another computer to test. It was working.
4.) Plugged another working PSU (Xigmatek 550W) from a working PC. Quadruple check the power connections is correct. No POST still.
5.) Test the memory DIMMs with different slots (all 4 of them). Installed one at a time and each time is in different slot. No POST still. Tried the board with NO memory, it beeps non-stop (Good news it is still working?)
6.) Did the Clear CMOS method according to manual. No POST still.
7.) Checked the monitor by plugging into another computer and see whether is it faulty. Is working.
8.) Retest all the memory DIMMs in another PC. All 4 DIMMs is working in another PC.
9.) Carefully remove the CPU and reseat the processor. After that retest all the 4 memory DIMMS (No matter which slot). No POST still.
10.) Disassemble the motherboard from the casing and other components to checked whether the capacitors are bad. Didn't detect any.
11.) Plugged in a working graphic card to check whether the onboard graphic is faulty. No POST still.
So now, I think I am left with 2 possibilities. The processor or the motherboard, however, the motherboard was the one showing symptoms based on the LED thing. So I am siding towards the motherboard is faulty?
I am out of ideas now. Hope someone can help me.

Yes, the CPU power is connected. both the 4 pins and 24 pins.
Some updates, I went to buy a Sempron 140 processor to test just for the sake whether the mobo works.. I just burnt some money on it.. it won't work.. Brought the motherboard back to the shop, they tested it and it is faulty.. so warranty claim. Guess I wont have a mobo for sometime..
Consider solved and I just burnt some money buying a spare proc which I think I wont be using also. haha.
Thanks for everyone who attempted to help me.

UPS transferred my package to local post office a week ago and still have not received package

I ordered a pair of headphones online and got the email saying it was shipped on April 20. I live in Buffalo and the package was shipped from Syracuse. I tracked the package on UPS and it said it transferred the package to the local post office in Buffalo on April 21.
When I checked the USPS website, it just says been 7 days and I still have not received it.
I need help in finding out where my package is. I'm wondering if it got lost in the post office since it's a pretty small package.
Should I contact Best Buy to replace my order and mail me another one? The address I'm living in is temporary and I will be moving from that address in two weeks so I'm worried about how long it will take. (I cannot have it mailed to the store to pick it up because I do not own a car and the local Best Buy store is too far for me)
Order Number: {removed per forum guidelines}
USPS Tracking Number: {removed per forum guidelines}
This is what it says on the UPS website
04/21/2015
11:48 A.M.
Package transferred to post office
Buffalo, NY, United States
04/21/2015
7:11 A.M.
Destination Scan
04/21/2015
4:16 A.M.
Arrival Scan
East Syracuse, NY, United States
04/20/2015
11:44 P.M.
Departure Scan
04/20/2015
7:49 P.M.
Origin Scan
United States
04/20/2015
4:25 P.M.
Order Processed: Ready for UPS
Tracking info from USPS
April 21, 2015
Pre-Shipment Info Sent to USPS
The U.S. Postal Service was electronically notified by the shipper on April 21, 2015 to expect your package for mailing. This does not indicate receipt by the USPS or the actual mailing date. Delivery status information will be provided if/when available.

Hello dsh,
One of the least enjoyable things about shopping online is when a shipment enters delivery limbo. I've had it happen too and it can be quite aggravating. I regret that your order seems to have gone missing and the inconvenience to you I know that entails.
Using the information you provided when you signed up for Best Buy Unboxed, I was able to review your account details. I note that you called us yesterday and that the agent with whom you spoke was able to arrange a reshipment for you.
If you have questions or concerns, please let me know. I'm grateful that you took the time to write to us!
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

HT204088 how can I cancel a subsription to the Bangkok Post on my iPad?

I signed up for the Bangjok Post on my iPad. I now get billed USD $6.99 every week from iTunes. I would like to cancel that subscription.
How do I do that?

See Here...
iTunes Store: Purchasing and managing auto-renewing subscriptions
If necessary Contact the Developer / Supplier / Provider
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Please post in the busier new cross-platform Bridge forum...

... as this forum will be closing down soon.
The new Bridge forum:
http://forums.adobe.com/community/bridge/

It has been over a week now since I asked the mod why the banner announcement to post in the Bridge General Discussion Forum was taken down but this and Mac forum not set to read only.
No answers yet.

On the Washington Post website, when I try to click on an article, I get the message, "Invalid URL". I don't have this problem with other Web sites. I recently upgraded to the secure version of Firefox.

I never had this problem before. I don't know if it's related to now having the secure (HTTPS) version of Firefox. Some WaPo links DO work, but most don't. One other thing: at least once when I Googled "The Washington Post" and clicked on the apparent result, I got a message saying that the certificate was "Not Trusted" and that legitimate Web sites did not ask me to override this issue and proceed to the site. Yet the website I'm trying to use is "www.washingtonpost.com", which I know for a fact is THE Post Website. What's going on, and how can I fix this? Thanks.

I never had this problem before. I don't know if it's related to now having the secure (HTTPS) version of Firefox. Some WaPo links DO work, but most don't. One other thing: at least once when I Googled "The Washington Post" and clicked on the apparent result, I got a message saying that the certificate was "Not Trusted" and that legitimate Web sites did not ask me to override this issue and proceed to the site. Yet the website I'm trying to use is "www.washingtonpost.com", which I know for a fact is THE Post Website. What's going on, and how can I fix this? Thanks.

Posting Period to close and open the New Posting Period

Hi,
I am trying to do MIGO, it is not allowing to post in the current period.
Pls let me know, How to close the current period (AUg) and Open the posting for Sep. Pls provide the steps.
Thanks

Thanks for the quick response,
I did MMPV and Gave the company code and enter period as 08 and selected check and close period and executed. It gives the response as
It gives period closing terminated
Can you tell me what should i do
thanks

Re-open the Previous posting period

hi...
we have closed the posting period for the month of 01-02(april-may) and open the 03-04(june-july)...
but now we want to open the previous posting period i.e. 01-02(april-may) again...so how could we do this..
one solution i have got is that...
1. go to OX18 delete all the assignment for that company code and plant.
2. go to OMSY and change the posting period..
3. go to OX18 and reassign the plant and company code again...
this is the right method to do that..?
will there be any -ive implications if I open the previous period by this procedure..?
or suggest me some other way to do that...
Thanks in advance

Hi
You can open Closed MM periods but be careful because SAP does recommend opening closed MM periods.
Steps are :
1) Tcode MMPI --from Tool Bar select - System - User Profile - Own Data - In parameter Tab Enter "MMPI_READ_NOTE" in parameter Field.
Try to remove assignment of plants from company code.
Now Go to -
T-Code OMSY & Set the required Period.
Re-assign Plants to Company Code & Check whether correct preriod is open thru T-Code - MMRV
Now use T-code - OMWD to Assign Valuation grouping code to Valuation area because the earlier data gets deleted when assignment of Plants was removed.
Use the transaction code OMS2 then select FERT (or any other Material Type used by your company)
Then click on the quantity and value update.
Select your plant or valuation area and put Tick Marks in Value update and Quantity update
Even check this link...Reopening the posting period that was closed
This will definitely reslove your problem.
Thanking you.

Enter a name and city for one-time account posting is the message i get

Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.

Hi,
I didnt understand what u mean by "when i am trying to post a onetime vendor".
Pl. specify whether you are:
-Creating a OTV
-Creating a PO for a OTV
or
doing any other transaction
Regards,
Prithviraj

The Output Post-processor is running but has not picked up this request

Hi
We are getting the following error when running an XML Publisher report in 11.5.10
The Output Post-processor is running but has not picked up this request.
We have checked that the SQL query in the data template works fine. Also, the XML output if we remove the template looks fine. The XML data and template also work fine when merged manually in MS WORD, and also if we create a Java class and run the XDO classes explicitly.
In Manage Concurrent Managers, the OPP seems to be running fine.
How can we debug this issue in an acceptance test environment without sysadmin access?
The problem does not occur in other enviroments.
I think this is not the error described in MetaLink Note 352518.1. This is the ONLY XML Publisher report in the system, so the OPP cannot be busy with other reports, and it is not giving the processing timeout error message (so case 2 is out of question).
Message was edited by:
TyskJohan

You can change the logging level of the OPP to statement to see more detail in the log file
(One problem we have is if you are running of a shared APPL-TOP environement where the conc manager job has to run on the physical node)

"Post of the Week" post

Similar Messages

Maybe you are looking for