Post revaluation after Batch in SM35 had been deleted

Dear,
I ran revaluation (FAGL_FC_FLXT) with batch A, then my batch was in the SM35 list. When i processed batch A in SM35, my system (SAP) terminated unexpectedly. After i log on again, i run mya batch again in SM35, but i wasn't working so that i deleted the batch.
I run revalation again with the same GL account and named it into batch B, but i got a message that the gl account has already revaluated. I checked SM35 n it displayed that Batch B didn't have any transaction (transaction = 0).
What should i do, so that i can post revaluation for that GL account?
Thank you

Hi,
System stores the foreign currency valuation details in table FAGL_BSBW_HISTRY assuming that batch will be run.
I think you should do one the these
- Carry out manual foreign currency valuation in TCODE F-05
- Remove the entry from the table (better try it out in sandbox system) will enable to do the valuation.
Thanks,
Sukhbold

Similar Messages

I have a ipod touch 5 and when i was loading it up to my computer i chose to restore my last ipod, which had no camera. After all my music was loaded all of my photos i had taken with my ipod had been deleted. Is there any way i could get photos back?

I have a ipod touch 5 and when i was loading to my computer i chose to restore my data from my last ipod which did not have a camera. Then after all my music was uploaded i noticed that all the pictures i had taken on my new ipod had been deleted. I think it may be because i chose to restore my last ipod which no photos on it. I was wondering if there is any way to restore my lost photos?

If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

I have an iPod Classic and when I try to move songs from my library to my iPod, my iTunes freezes. When I tried to eject my iPod, nothing happened and I had to force quit iTunes. When I unplugged my iPod, all of my songs had been deleted. What can I do?

After attempting to move songs from my iTunes library to my iPod Classic, the pinwheel kept spinning and iTunes froze. I tried pressing CTRL E to eject the iPod, but nothing happened. I unplugged the iPod then force quit iTunes, but when I checked my iPod all of the songs had been deleted. I tried plugging the iPod back in and slowly moved music over again, but iTunes still froze. I don't want to restore it to factory settings because I am afraid of losing the pictures I have on there and can't figure out how to get them off.

Are you using a Macbook?
If all your songs on the iPod are deleted, most likely the photios are gone too.
Unless you put the photos, via Diskmode.
To recover the photos that you've put in Diskmode, use Finder to locate where it is in the iPod.
Try also if iPhoto can locate those photos.

I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

I have an IPhone 3; when i checked my messages earlier some had been deleted. Upon looking at the settings i noticed my message settings have changed! I no longer have the option of how long to keep my SMS messages etc. Can anyone help?

The iOS settings for the iPhone 3 never had an option to determine how long you wanted to save messages. That settings is new to iOS8. As far as some being deleted, there is nothing about the phone that should delete messages without some user intervention. Try a reset on the phone, this will not affect your data. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.

My friend took my phone and tried to guess my password to unlock it, and he locked me out of my phone for a minute, but when it unlocked and i tried to use my phone all of my apps, photos, all my data had been deleted. how can i get them back?

my friend took my phone and tried to guess my password to unlock it, and he locked me out of my phone for a minute, but when it unlocked and i tried to use my phone all of my apps, photos, all my data had been deleted. how can i get them back?

As Ocean20 say, your only shot at recovering the photos and data is to restore from a backup (with iTunes if you took the backup with iTunes, through iCloud if you took the backup through iCloud).
The erasure is to prevent your data from falling into the hands of somebody who takes your phone and eventually guesses your password. If you feel that the inconvenience caused by this feature and your friend outweighs the trouble that somebody could cause if they got possession of your contacts and other data, you can change this behaviour.
Settings > General > Passcode Lock > Erase Data > OFF

My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

There is no such thing as an "SG3" or "SG4". Did you possibly mean a 3GS and iPhone4?
It has always been very basic to ensure that a backup exists of your media and other important files. Computers fail, hard drives crashes... things happen. Do you not have a backup? The iPhone, like all iDevices is NOT a backup of your media, but rather a mirror of the content in the iTunes library on your computer.
If your contacts, pics, etc are not on your computer, no backups of the iPhone exist, and they are not on the phone, they are gone.
No one can magically make them re-appear.

I had been deleting some of the double songs that are on I-tunes and suddenly all but three of my bob dylan albums collection dissapeared . . can i get them back ? if i can ,how do i ?

I had been deleting some of the double Dylan songs that are in my I-tunes library and suddenly most of my Bob Dylan collection dissappered . I was requesting to "save file" at the time . How would I get those songs back - if it's possible ? Jim

http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CNyMyIvbtqoCFcE42godv DJR7g
I am assuming you never backed up your computer.
Sounds like you still may have problems with your PC.

I have an error 42404 message. I have uninstalled Itunes,quick time, etc, etc. I then checked to make sure that all files had been deleted. I have 2 files that haven't been deleted and are still not. It will not allow me to delete them access denied.

I received an error 42404 message. I have uninstalled itunes, quick time, etc, etc. I then went to check that all the files had been deleted, however,
Program files\common files\Apple - will not delete - it says folder access denied
program files (x86)\common files\Apple - will note delete - it says require permission from SYSTEM to make changes to this folder.
How can I delete these 2 files so that I can reinstal Itunes?

You can uninstall the relevant extensions from Tools>Addons to remove those toolbars. Also there may be some unwanted plugins which you may want to disable. This should solve your problems.
If you still want a clean profile, uninstall firefox with the "Remove my Firefox personal data and customizations" checkbox enabled. Alternatively you may remove your firefox profile folder which (on Window7) is stored in C:\Users\<your-username>\AppData\Roaming\Mozilla\Firefox\Profiles folder with a randomly name. You may delete this folder before installing a new version to get a clean profile.

How do I reinstall Indesign after my hard drive has been deleted?

How do I reinstall Indesign after my hard drive has been deleted?

After getting a hard drive back in working order you can either reinstall the software using the disks if you purchased disks, or you can download your software as a trial version and use your original serial number to activate it.
If the software is the latest version you can download it from Adobe's product pages.
If the software is an older version you can download the trial version of the software using the link below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.
http://prodesigntools.com/tag/ddl

I tried to text a photo from i phone 5 to a contact in i messaging. When the contact came up, a conversation string that had been deleted also came up...I've not see this before. Where might this conversation string be stored? Thank you

I tried to text a photo from i phone 5 to a contact in i messaging. When the contact came up, a conversation string that had been deleted also came up...I've not see this before. Where might this conversation string be stored? Thank you

I tried to text a photo from i phone 5 to a contact in i messaging. When the contact came up, a conversation string that had been deleted also came up...I've not see this before. Where might this conversation string be stored? Thank you

Iphoto crashed after "successful import" but during the "finishing import" stage - i had selected to delete the imported photos on my phone...iphoto crashed after 90% of the photos had been deleted. Now i can't see any of the photos on iphoto

Hi guys, I was importing about 5000 photos from my phone onto my computer. it said the import was successful but did i want to delete or keep the photos on the original device. I opted to delete photos. The photos started to count down as they deleted and the computer said "finishing import". Once it had deleted down to about 600 photos iphoto simply disappeared, and a message popped up to say it had crashed. I opted to reopen iphoto and saw that not one of the photos had imported! Not only that but now all the photos have been deleted from my phone. I'm really upset if i've lost the last year of photos/ videos....does anyone know what has happened/ if i can recover them?
thanks so much in advance x

Not sure where you got those ideas - simply import your photos and keep the rather than deleting - then after a successful import and at least one back up cycle you can format the card if you want or you can do what I do and keep the photos moving to a new card when that one is full giving you yet another backup - if problems occurs then trouble shoot them - no need to trouble shoot if there is no problem
ad personally I find removing the card and plugging it into my card reader is faster and easier than finding the USB cable and hooking it up, turning on the camera, verifying that tty e battery is charged, etc - and it eliminates a point of failure in the USB cable and the chance of the camera battery running out - but that is clearly a personal choice
You are overthinking this - it is simple
a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card -- I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
LN

Adjustment of GR and IR quantity after GR and IR had been done.

Hello experts,
my business scenario is like that.
my purchasing material is very minute.
so initially when we go for GR and IR, we don't check it physically.
but when we use the material physically, we check it physically and if there is any mismatch in physical quantity and my system quantity.(GR /IR).
But is it possible in SAP.
because when i go for return delivery it is asking deficit of PO IR QUANTITY
EXAMPLE:
PO QUANTITY: 200 PC
GR QUANTITY: 200 PC
IR QUANTITY: 200 PC,
AFTER physical checking we found that we received only 190 pc,
so we for credit memo for 10 pc.
now my ir quantity becomes 190 pc.
then i go for return delivery for 10 pc.but it didnt allow me to do this...the error is coming like this..
Deficit of PU IR quantity 10 pc
can anybody tell me how to overcome this issue.
regards.
raghu.

you can always make return to vendor for the quantity you have not received.
but once postings is done you cant reverse the posting through lot.
for this purpose , it is suggested to use inbound delivery
VL31N
after inbound w.r.t inbound number you can make GRN after counting the quantity of the material .
So GRN is made in correct received QTY.then process Quality lot and so payment also happens smoothly without credit memo.
moreover once IR is done for whole qty you can only accept the material not other way because credit memo is a accounting document which can be raised for many purposes like change in pricing, duty., etc., not only quantity deficiency...
Edited by: Sarathy on Aug 20, 2009 11:36 AM

I was syncing my ipod to itunes today and after I ejected it and looked at my ipod all of the songs from it had been deleted. Please help.

So I added some new songs to my Itunes library and plugged in my Ipod in order to add the new songs onto it. After it said sync complete I ejected the Ipod and pressed the music button on it. There were no songs on the Ipod anymore or any playlists. Photos still remained however. I then plugged my Ipod back into the computer and Itunes shows that there are still all of these songs still on the Ipod even though they're not there. What is the problem with my Ipod? Any help would be much appreciated.

More info needed to be of any assistance.
Which model generation of iPod Classic are you using?
Are you using Windows or Mac OS X?
Which version of iTunes are you using?
What is the iPod software version shown in the iTunes summary page?

Removing a web gallery album, even after the iphoto album has been deleted.

I have just created an Album of photos in iphoto, and then published the album to the web gallery. I was able to view the album via the web and my wife did too on a windows based laptop. I then went back to add 2 more photos to the album in iphoto, then again went back to see if they were uploaded too. One was and one wasnt, then the second one did after a couple of minutes. Now I have deleted the albums I created in iphoto, but I still have the link to go to the web gallery site and the album is still online with 24 photos. How can I remove the photos from my online gallery.
Thanks in advance to anyone who can help. I'm still in honeymoon stage but of course loving my new imac. and .mac account.

I think your best bet is to post your questions on the iPhoto discussions. More people will see them there.
I have been using the web albums for some time. I have merely started iPhoto, then select the web gallery album you wish to delete. Click on the "Web Gallery" icon located at the bottom right hand side of the window. When it opens click on "advanced". You will see the option to hide the gallery on the web.
Now you should be able to go back to the album in iPhoto and delete it.

Workstations not showing up in Console one (had been deleted before)

We're having a problem at the school I work at. I had installed Zenworks on
a particular set of computers and they became registered in Console One. We
then had some problems relating to other software and decided to take
Zenworks off of these computers. This was just poor troubleshooting. We
deleted these workstations from Console one as well. We've since determined
that Zenworks was never the problem and reinstalled it on the those
desktops. Unfortunately, the machines aren't re-registering within Console
One and will not show up.
Any help would be greatly appreciated. Thanks.
Console One version: 1.3.6c
Zenworks 6.5
Novell Client 4.90 SP2

Tallbrooks,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Post revaluation after Batch in SM35 had been deleted

Similar Messages

Maybe you are looking for