Post Too Large

I am getting the following exception trying to upload a 3MB file. I know that the post size is adjustable, does anybody know where? I am using JCAPS 5.1.3 Integration server.
javax.servlet.ServletException: Post too large
        com.stc.dap.runtime.servlets.pageflow.PageFlowServlet.handleRequest(PageFlowServlet.java:372)
        com.stc.dap.runtime.servlets.pageflow.PageFlowServlet.doPost(PageFlowServlet.java:347)
        javax.servlet.http.HttpServlet.service(HttpServlet.java:768)
        javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
        sun.reflect.GeneratedMethodAccessor567.invoke(Unknown Source)
        sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        java.lang.reflect.Method.invoke(Method.java:585)
        org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
        java.security.AccessController.doPrivileged(Native Method)
        javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:318)
        org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
        java.security.AccessController.doPrivileged(Native Method)
        com.stc.dap.runtime.servlets.pageflow.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:48)
        sun.reflect.GeneratedMethodAccessor580.invoke(Unknown Source)
        sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        java.lang.reflect.Method.invoke(Method.java:585)
        org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
        java.security.AccessController.doPrivileged(Native Method)
        javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
        org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:318)
        org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:261)

IIRC set a JVM property -Dorg.apache.coyote.http11.Http11Protocol.maxPostSize=4000000 or -Dorg.apache.coyote.http11.Http11BaseProtocolmaxSavePostSize=4000000
you'd need to check which one.

Similar Messages

Error while posting Invoice IDOC (The difference is too large for clearing)

Hi All,
While posting Invoice IDOC to Remittance Advice IDOC get fails with status 51 & message ' The difference is too large for clearing'.
Please suggest any solution or reason to fail IDOC.
Thanks & Regards,
Ajay
Moderator message: please search for information and try to find out yourself before asking, this will be a functional problem anyway that should be asked in the appropriate forum, e.g. ERP Financials.
locked by: Thomas Zloch on Aug 20, 2010 1:59 PM

Pls check the tolerance amounts limits:
SPRO--- F/A --AR/AP -
Business transactions -Open item clearing--- Clearing differance---- Define / Assign tolerance groups for emp -
Where you need to change the limits of max amounts with the %
Let me know for any info.
Regards
Suresh

FB05 (post and clearing) u0093The difference is too large for clearingu0094

I am passing entry through FB05 (Post and clear). The entry is between two GL accounts maintained as open items. At the time of passing the entry there is difference between these two accounts. I want this difference to be posted automatically to profit and loss account. (I dont want to charge of the difference manually). I can not post the entry because system is throwing error such as The difference is too large for clearing. I checked the tolerance limit(OBA4), but the difference is within the tolerance limit.
Does anybody know how to configure for this situation?
Do I need to do any configuration in FBKP?
(Please consider this very urgent)
Regards,
Amit Bedekar.

Hello
Check if this helps.
Reason Codes
Use
To use the clearing document to find out why a difference existed, you can assign reason codes to the line items. Reason codes are indicated by keys that you define in Customizing.
You can assign reason codes for the following:
Partial payments made for open items.
Residual items created for an open item. Here you can assign one or more reason codes. In this case, you divide the difference amount into a corresponding number of partial amounts.
Differences posted on account without reference to an open item.
For each line item you enter in the clearing procedure, if the reason code field for the account is ready for input.
Integration
When you process residual items, the reason code also controls how the remaining amount is posted. The remaining amount can be posted as follows:
To a G/L account that is assigned to the reason code you enter.
As a new customer or vendor open item if you do not enter a reason code, or if the reason code you enter is not indicated as described.
Features
Properties of Reason Codes
For incoming payments, you can send a payment notification to the customer. This process can run automatically if differences arise during clearing. In the tolerance group set up for the customer, you can define what type of notice to create for partial payments, residual items, and payments on account.
The system can use the specified reason code to determine the type of notice to create as long as only one reason code is specified in the entire clearing transaction.
In order to check a customer's credit limit, the total of open items is taken into account. If certain contentious items should not be considered, you can define a separate reason code for these items.
Reason codes control:
How the difference is posted (as a new open item or to a predefined G/L account)
What type of payment notice is created
Whether an item is included in credit limit checks
For information on defining reason codes, see the following activities in the Financial Accounting Implementation Guide:
Define Reason Codes (Incoming Payments)
Define Reason Codes (Manual Outgoing Payments)
Define Standard Reason Codes for Clearing with Payment Advice Notes
Reg
*assign points if useful

Video Sharing - Videos upload issue to Vimeo because files are now too large post iOS7.

Videos taken prior to iOS7 update uploaded without issues to Vimeo. Vidoes taken after iOS7 update will not upload because videos are too large. I am videoing the same type of activities for the same duration post iOS7 as I was pre-iOS7. What has changed with iOS7 that is causing my videos to be saved as larger files? This is a HUGE issue for what I do! HELP PLEASE!!

You're going to have to edit them on a computer before uploading them, unless you can convince Vimeo to change their limits.

I tried sending the Adobe pdf file of a poster via email and it said the file was too large to send. How do I remedy this?

I tried sending an Adobe pdf file of a poster via email and it wouldn't go through because it said the file was too large. How do I remedy this?

Lots of free file hosters out there. Mediafire.com as an example. Upload a file there, copy and paste the download link you are given into your email to the client, then delete it as soon as the client successfully downloads it. Mediafire has 10 gb storage for free accounts.
Email is limited to 10 MB on attachments. So that's where file hosting comes in.

IMovie Project too Large posting to Youtube

My Youtube account is approved for more than 15 minutes and greater than 20GB, yet iMovie tells me It's too large, and that it needs to be under 15 mins and under 2GB. Is this a restriction with iMovie?
Dave

Hi y'all,
I am having a simlar issue with iMovie for iPad.
My files are way to big to export.
The fileis is 2.4GB and I can only export 500MB to Vimeo.
It's 63 mins and I can only export 15 mins to youtube!
I recorded a video diary and have clipped the file/project in the original project/timeline in to day recordings. I have been unable to find a way to export those individual clips (day recordings) in to separate folders. I was hoping I could export individual clips in to sepearate folders then export them.
I hope this makes sense?
If it does please let me know if this possible with imovie for iPad?
Thank you!

Cannot decrypt RSA encrypted text : due to : input too large for RSA cipher

Hi,
I am in a fix trying to decrypt this RSA encrypted String ... plzz help
I have the encrypted text as a String.
This is what I do to decrypt it using the Private key
- Determine the block size of the Cipher object
- Get the array of bytes from the String
- Find out how many block sized partitions I have in the array
- Encrypt the exact block sized partitions using update() method
- Ok, now its easy to find out how many bytes remain (using % operator)
- If the remaining bytes is 0 then simply call the 'doFinal()'
i.e. the one which returns an array of bytes and takes no args
- If the remaining bytes is not zero then call the
'doFinal(byte [] input, int offset, in inputLen)' method for the
bytes which actually remained
However, this doesnt work. This is making me go really crazy.
Can anyone point out whats wrong ? Plzz
Here is the (childish) code
Cipher rsaDecipher = null;
//The initialization stuff for rsaDecipher
//The rsaDecipher Cipher is using 256 bit keys
//I havent specified anything regarding padding
//And, I am using BouncyCastle
String encryptedString;
// read in the string from the network
// this string is encrypted using an RSA public key generated earlier
// I have to decrypt this string using the corresponding Private key
byte [] input = encryptedString.getBytes();
int blockSize = rsaDecipher.getBlockSize();
int outputSize = rsaDecipher.getOutputSize(blockSize);
byte [] output = new byte[outputSize];
int numBlockSizedPartitions = input.length / blockSize;
int numRemainingBytes = input.length % blockSize;
boolean hasRemainingBytes = false;
if (numRemainingBytes > 0)
hasRemainingBytes = true;
int offset = 0;
int inputLen = blockSize;
StringBuffer buf = new StringBuffer();
for (int i = 0; i < numBlockSizedPartitions; i++) {
output = rsaDecipher.update(input, offset, blockSize);
offset += blockSize;
buf.append(new String(output));
if (hasRemainingBytes) {
//This is excatly where I get the "input too large for RSA cipher"
//Which is suffixed with ArrayIndexOutofBounds
output = rsaDecipher.doFinal(input,offset,numRemainingBytes);
} else {
output = rsaDecipher.doFinal();
buf.append(new String(output));
//After having reached till here, will it be wrong if I assumed that I
//have the properly decrypted string ???

Hi,
I am in a fix trying to decrypt this RSA encrypted
String ... plzz helpYou're already broken at this point.
Repeat after me: ciphertext CANNOT be safely represented as a String. Strings have internal structure - if you hand ciphertext to the new String(byte[]) constructor, it will eat your ciphertext and leave you with garbage. Said garbage will fail to decrypt in a variety of puzzling fashions.
If you want to transmit ciphertext as a String, you need to use something like Base64 to encode the raw bytes. Then, on the receiving side, you must Base64-DEcode back into bytes, and then decrypt the resulting byte[].
Second - using RSA as a general-purpose cipher is a bad idea. Don't do that. It's slow (on the order of 100x slower than the slowest symmetric cipher). It has a HUGE block size (governed by the keysize). And it's subject to attack if used as a stream-cipher (IIRC - I can no longer find the reference for that, so take it with a grain of salt...) Standard practice is to use RSA only to encrypt a generated key for some symmetric algorithm (like, say, AES), and use that key as a session-key.
At any rate - the code you posted is broken before you get to this line:byte [] input = encryptedString.getBytes();Go back to the encrypting and and make it stop treating your ciphertext as a String.
Grant

Page header plus page footer too large for the page in crystal report 2008.

Hi,
when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
regds,
samapth

This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
page header plus page footer too large for the page.
Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
Ludek

TIme Machine backup grows too large during backup process

I have been using Time Machine without a problem for several months, backing up my imac - 500GB drive with 350g used. Recently TM failed because the backups had finally filled the external drive - 500GB USB. Since I did not need the older backups, I reformatted the external drive to start from scratch. Now TM tries to do an initial full backup but the size keeps growing as it is backing up, eventually becoming too large for the external drive and TM fails. It will report, say, 200G to back up, then it reaches that point and the "Backing up XXXGB of XXXGB" just keeps getting larger. I have tried excluding more than 100GB of files to get the backup set very small, but it still grows during the backup process. I have deleted plist and cache files as some discussions have suggested, but the same issue occurs each time. What is going on???

Michael Birtel wrote:
Here is the log for the last failure. As you see it indicates there is enough room 345g needed, 464G available, but then it fails. I can watch the backup progress, it reaches 345G and then keeps growing till it give out of disk space error. I don't know what "Event store UUIDs don't match for volume: Macintosh HD" implies, maybe this is a clue?
No. It's sort of a warning, indicating that TM isn't sure what's changed on your internal HD since the previous backup, usually as a result of an abnormal shutdown. But since you just erased your TM disk, it's perfectly normal.
Starting standard backup
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
2009-07-08 19:37:53.659 FindSystemFiles[254:713] Querying receipt database for system packages
2009-07-08 19:37:55.582 FindSystemFiles[254:713] Using system path cache.
Event store UUIDs don't match for volume: Macintosh HD
Backup content size: 309.5 GB excluded items size: 22.3 GB for volume Macintosh HD
No pre-backup thinning needed: 345.01 GB requested (including padding), 464.53 GB available
This is a completely normal start to a backup. Just after that last message is when the actual copying begins. Apparently whatever's happening, no messages are being sent to the log, so this may not be an easy one to figure out.
First, let's use Disk Utility to confirm that the disk really is set up properly.
First, select the second line for your internal HD (usually named "Macintosh HD"). Towards the bottom, the Format should be +Mac OS Extended (Journaled),+ although it might be +Mac OS Extended (Case-sensitive, Journaled).+
Next, select the line for your TM partition (indented, with the name). Towards the bottom, the Format must be the same as your internal HD (above). If it isn't, you must erase the partition (not necessarily the whole drive) and reformat it with Disk Utility.
Sometimes when TM formats a drive for you automatically, it sets it to +Mac OS Extended (Case-sensitive, Journaled).+ Do not use this unless your internal HD is also case-sensitive. All drives being backed-up, and your TM volume, should be the same. TM may do backups this way, but you could be in for major problems trying to restore to a mis-matched drive.
Last, select the top line of the TM drive (with the make and size). Towards the bottom, the *Partition Map Scheme* should be GUID (preferred) or +Apple Partition Map+ for an Intel Mac. It must be +Apple Partition Map+ for a PPC Mac.
If any of this is incorrect, that's likely the source of the problem. See item #5 of the Frequently Asked Questions post at the top of this forum for instructions, then try again.
If it's all correct, perhaps there's something else in your logs.
Use the Console app (in your Applications/Utilities folder).
When it starts, click +Show Log List+ in the toolbar, then navigate in the sidebar that opens up to your system.log and select it. Navigate to the +Starting standard backup+ message that you noted above, then see what follows that might indicate some sort of error, failure, termination, exit, etc. (many of the messages there are info for developers, etc.). If in doubt post (a reasonable amount of) the log here.

Sandbox WebPart Postback too Large?

Hi guys, I've done some research and it looks like the error I'm running into (when saving the web part properties) is that my post back is too large.
This is a simple sandbox web part I'm building, which works great until I added the last configuration option which put me over the limit.
Web Part Code (.cs)
using System;
using System.ComponentModel;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
namespace P.SPS.UI.Web_Parts.jQuery_UI_Accordion_Zone
[ToolboxItemAttribute(false)]
public class jQuery_UI_Accordion_Zone : WebPart
#region custom web part properties
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery"),
WebDescription("Check to include reference to jQuery. * Google CDN")]
public bool includejQuery { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery UI"),
WebDescription("Check to include reference to jQuery UI. * Google CDN")]
public bool includejQueryUI { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include jQuery UI CSS"),
WebDescription("Check to include reference to jQuery UI CSS. * Google CDN")]
public bool includejQueryUICSS { get; set; }
[WebBrowsable(true),
Category("JQuery Options"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Include SPAccordions Script"),
WebDescription("Check to include the custom spaccordions() jQuery function.")]
public bool includeSPAccordionsScript { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Width (px)"),
WebDescription("If set a min and max width will be applied to the tab container. (integer)"),
DefaultValue(0)]
public int dataWidth { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Active"),
WebDescription("Which panel should be open? (integer)"),
DefaultValue(0)]
public int dataActive { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Scroll to Top on Activate"),
WebDescription("When set to true, the accordion will stay in view while switching headers.")]
public bool dataScrollToTop { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Collapsible"),
WebDescription("When set to true, the active panel can be closed.")]
public bool dataCollapsible { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Disabled"),
WebDescription("If set the accordion will be disabled.")]
public bool dataDisabled { get; set; }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Event"),
WebDescription("The type of event that the headers should react to activate the panel. (event in quotations and comma seperated)")]
public string dataEvent { get; set; }
public enum dataHeightStyleOptions { auto, fill, content }
[WebBrowsable(true),
Category("JQuery Accordion() Properties"),
Personalizable(PersonalizationScope.Shared),
WebDisplayName("Height Style"),
WebDescription("Controls the heigh of the accordion widget and each panel.")]
public dataHeightStyleOptions dataHeightStyle { get; set; }
#endregion
protected override void Render(HtmlTextWriter writer)
if (includejQuery)
writer.WriteLine("<script src=\"//ajax.googleapis.com/ajax/libs/jquery/1.11.0/jquery.min.js\"></script>");
if (includejQueryUI)
writer.WriteLine("<script src=\"//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/jquery-ui.min.js\"></script>");
if (includejQueryUICSS)
writer.WriteLine("<script language=\"javascript\">$('head').append('<link rel=\"stylesheet\" href=\"//ajax.googleapis.com/ajax/libs/jqueryui/1.10.4/themes/smoothness/jquery-ui.css\" />');</script>");
if (includeSPAccordionsScript)
writer.WriteLine("<script language=\"javascript\">$(document).ready(function(){if((document.getElementById(\"MSOLayout_InDesignMode\").value==1)?false:true){$(\".spaccordions\").spaccordions()}});(function(a){a.fn.spaccordions=function(){var e=a(this).data(),b={active:(e.active)?e.active:0,collapsible:(e.collapsible==1)?true:false,disabled:(e.disabled)?e.disabled:false,heightStyle:(e.heightstyle)?e.heightstyle:\"auto\",event:(e.event)?e.event:\"click\"};if(e.scrolltotop){b.activate=function(g,l){var k;if(l.newHeader.length==1){k=a(l.newHeader[0])}else{k=a(this).find(\".ui-accordion-header\").eq(0)}var i=a(window).height();var o=(a(window).scrollTop()==0)?a(\"#s4-workspace\").scrollTop():a(window).scrollTop();var h=k.height();var j=k.offset().top;var m=a(\"#s4-ribbonrow\").height();var n=j+o-m;console.log(\"elementScrollY \"+j);console.log(\"screenY \"+i);if(j>=m&&j<=i){}else{a(window).scrollTop(n);a(\"#s4-workspace\").scrollTop(n)}}}var f=a(this).parents(\"table\").eq(1);var d=a('<div class=\"accordion\">');if(e.width>0){d.width(e.width)}var c=a(\"\");a(this).parents(\"tr\").eq(1).remove();f.find(\".s4-wpTopTable\").each(function(h){var g=a(this).find(\" > tbody > tr > td\");c=c.add(\"<h3>\"+a(g[0]).find(\".ms-WPTitle\").text().trim()+\"</h3>\");c=c.add(\"<div>\"+a(g[1]).html()+\"</div>\")});d.append(c);f.before(d);f.hide();d.accordion(b);return this}})(jQuery);</script>");
writer.WriteBeginTag("div");
writer.WriteAttribute("class", "spaccordions");
// build custom jquery Accordion() options
if (!isEmptyorNull(Convert.ToString(dataWidth.ToString())))
writer.WriteAttribute("data-width", dataWidth.ToString());
if (!isEmptyorNull(Convert.ToString(dataActive)))
writer.WriteAttribute("data-active", dataActive.ToString());
if (!isEmptyorNull(Convert.ToString(dataCollapsible)))
writer.WriteAttribute("data-collapsible", Convert.ToString(dataCollapsible).ToLower());
if (!isEmptyorNull(dataDisabled.ToString()))
writer.WriteAttribute("data-disabled", dataDisabled.ToString());
if (!isEmptyorNull(dataEvent))
writer.WriteAttribute("data-event", dataEvent);
if (!isEmptyorNull(Convert.ToString(dataHeightStyle)))
writer.WriteAttribute("data-heightstyle", dataHeightStyle.ToString());
if (!isEmptyorNull(Convert.ToString(dataScrollToTop)))
writer.WriteAttribute("data-scrolltotop", Convert.ToString(dataScrollToTop).ToLower());
writer.Write(HtmlTextWriter.TagRightChar);
writer.WriteEndTag("div");
writer.WriteLine("<p>Use the web part properties menu to configure options for <a href=\"http://jqueryui.com/accordion/\" target=\"_blank\">jQuery UI Accordion</a>.</p>");
base.Render(writer);
protected void Page_Load(object sender, EventArgs e)
public bool isEmptyorNull(string value)
if (string.IsNullOrEmpty(value) || value == "0")
return true;
return false;
Now can anyone recommend how I could solve this issue? I'm not a back-end programmer :/.
Error after Post:
Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred.
Show Error Details
Debugger doesn't show anything so I know it wasn't reaching my code.

Hi,
What the last configuration option did you add?
Try to disable the ViewState of the .Net control in the web part.
Or
Add following into web.config(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\ 14\UserCode) to avoid sandbox webpart error after post back.
<httpRuntime requestLengthDiskThreshold=”4096” /> (or set value as per your requirement)
Here is a blog for you to take a look at:
http://sohilmakwana.wordpress.com/2013/11/29/sandbox-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute-method-in-the-partial-trust-app-domain/
If you want to achieve an Accordion web part, the following links for your reference:
http://altfo.wordpress.com/2013/06/18/jquery-accordion-based-announcement-web-part/
http://fitandfinish.ironworks.com/2010/02/how-to-create-an-accordion-web-part.html
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Essbase Error:Set is too large to be processed. Set size exceeds 2^64 tuple

Hi,
we are using obiee 11.1.1.6 version with essbase 9.3.3 as a data source . when I try to run a report in obiee, I am getting the below error :
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Internal error: Set is too large to be processed. Set size exceeds 2^64 tuples (HY000)
but if I run the same query in excel add in, I am just getting 20 records . wondering why I am getting this error in obiee . Does any one encountered the same issue ?
Thanks In advance,

Well if you want to export in I think you have to manually do it.
The workaround it to open your aperture library by right clicking it and show contents...
Then go into your project right click show contents...
In here there are sub folders on dates that the pictures were added to those projects. If you open the sub folder and search for your pictures name it should be in that main folder.
You can just copy it out as you would any normal file to any other location.
Voila you have manually exported out your file.
There is a very similar post that has been close but again you can't export the original file that you are working on - FYI http://discussions.apple.com/thread.jspa?threadID=2075419

BUG: Web service returns request XML as response when result too large

Hi,
sorry for cross-posting, but the Web Services forum seems to be quite abandoned and this is an urgent issue for me.
I have a web service returning some records of a given type (created using JDeveloper 10.1.3.3). The running environment and the service implementation do not seem to make any difference, as the situation is the same whether running it in embedded OC4J or in AS 10.1.3.1, and whether it is generated from a PL/SQL procedure or a method of a plain Java class.
The problem is that if the result of this web service is too large (contains a lot of records), then the processing halts in some Oracle class in some web service library, so not in a debuggable generated web service source or in the service implementation itself.
I think that the XML processing halts because of a "java.lang.OutOfMemoryError: Java heap space".
Then a more serious problem follows: the service doesn't return a fault message but the original request XML as a response. Obviously, this can lead to some really unexpected errors.
To reproduce this error:
1. Create a Java class with a method returning an array of an arbitrary type, of the size specified in an input parameter.
2. Create a web service from this class.
3. Call it multiple times increasing the size parameter in every call until you get back the request as response or any error message.
For example:
- if you test the web service using the web page generated to access the endpoint, then you can see the response XML - in case you don't get an Internal Server Error (Java heap space).
- if you use a generated web service proxy for testing, then it will give an error saying "unexpected element name: expected={namespace}someOperationResponseElement
actual={namespace}someOperationElement".
Any ideas how to locate / solve this problem?
Regards,
Patrik

Patrik,
the usual recommendation is to try with 10.1.3.3 instead of 10.1.3.1 to exclude you are hunting down an already fixed issue. From what you describe, the error seems less JDeveloper related than OC4J or OracleAs.
So in case it reproduces in 10.1.3.3 I suggest to create a testcase and open a service request with support, or try the OC4J forum in case its known there.
Frank

Trx F-53, The difference is too large for clearing Message no. F5263

Hi,
I created a PO, then I posted the goods receipt, the invoice and I was trying to
post the payment by F-53 trx.
When I select an open item from the list and I try to simulate the posting by the menu (Document, simulate), system replies by:
"*The difference is too large for clearing
Message no. F5263*"
Cannot understand why it is not possible to post the outgoing payment
Regards

Dear Sappione,
did You check the tolerances?
Check in transaction OBY6 the indicator 'No forex rate diff. when
clearing in LC' is not set the amount is converted with the exchange
rate valid at clearing date, in case You're clearing in LC a foreign document.
When you post a clearing transaction with rounding
differences, those differences are posted to an additional line item
GL accounts. This account determination is customized as follows :
FBKP - Exchange rate differences -
Exchange rate difference in open items - KDF -a/c XXXXXXXXX
(Realized gain exchange rate difference)
The accounts used for rounding differences when clearing
are the realized gain/loss exchange rate accounts.
please check all the 3 suggestions.
Mauri

I created a 23 minute slideshow with music. how can I share it? youtube and smugmug both say it is too large?

I created a 23 minute slideshow with music of family vacation. Youtube and smugmug both said it was too large to post for my family.
suggetions please?? I use to use Mobileme...

A few different ways about this. You could split the slide show into smaller sections that are withi the limits for posting and then post each section.
You could try a different encoding to make the file smaller. What settings did you use when you created and exported the slide show?

Jdeveloper Error: "Code too large"

Hi all,
While running a page in Oracle Jdeveloper 10g, I am getting compilation error “Code too large” on ‘processformrequest’ in controller. I tried the below steps from metalink, but I am still getting the error message.
1. Try to compile your page with the standard "javac" Java compiler instead of the "ojc" Java
compiler, as it generates methods a bit smaller.
2. Change the compiler used by the Embedded OC4J:
2.1) Go to "Tools" -> "Embedded OC4J Server Preferences..."
2.2) Under "Global" select "Java Compiler"
2.3) Select "javac" from the "Compiler" list
2.4) Then under "Bin Directory", point to the location of the javac compiler
(usually in the JDK bin directory).
Please let me know if there is any way to resolve this error.
Thanks in Advance,
Saravana

Hi Saravana,
Please post this in OAF forum(OA Framework
~Vikram
Edited by: Vikram K on Jul 27, 2009 11:00 AM

Post Too Large

Similar Messages

Maybe you are looking for