Posting againt asset purchase order

Hi,
We are careating purchae order against assest.When u are posting f-48 with same purchase order then get following error
" Enter value will be exceeded"
if i given less amount against purchase order amount then simulate document .
could u give suggestion u are very urgent
regardsf
cvs reddy

Dear CVS,
Syatem giving u the error because u r exceeding the value of the PO coz u r giving down payment thru F-48. Meaning, u decided to purchase the asset for INR1000, and against that u r giving advance of INR200, then only system will allow you to post the down payment. How can u give down payment more than value of ur asset.
So during a document entry, put the amount less than the PO amount.
Regards,
Ajay Gupte

Similar Messages

  • Error when posting invoice for Asset purchase order

    Hi,
    we are getting the errore message account determination for asset posting with keys not defined in chart of accounts,when posting an invoice for asset purchase order.
    Can any one see why this error is coming and what will be the solution.
    Nagesh

    Hi Prabhakar,
    Here is the reply,
    we have 10 line items,in which 3 items are freight related and other 7 items are related to goods reciept.
    i am trying to enter invoice for 3 line items at a time with two relevant to goods reciept and other related to non goods receipt(freight related).
    accounting entries generated after the GR are as follows,
    asset under construction account,and GR/IR account.
    Let me know the details is sufficient or not.

  • Down payment (F-48)   for Asset Purchase Order

    Dear Experts,
    Please guide me,   i  am getting one error while doing down payment to  vendor through F-48 ,    I created one asset purchase order,  against purchase order making down payment that time  i am getting this  error message
    "You cannot use this transaction type to post to this asset
    Message no. AA834
    Diagnosis
    The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
    The asset to which you are posting belongs to class 401006 (chart of depreciation WCCD). You cannot post to this class using the transaction type you have entered.
    Procedure
    Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.  "
    my asset is plant and machinery, any configuration is required.
    as per my knowledge i checked in T.code : OAYB   transaction type groups   15  only assign AUC asset class and  Capital  Advance.    In account determination  balance sheet  accounts   there is  Acquistion : Down payment   and  Clearin G/lL for Down payment   g/l a/c  not assign .
    SAP F1 help  in that field (above said)  is saying that only for AUC.
    Please guid me ,   What to do.
    Thanks & Regards
    Chandu

    Hi Chandu,
    Can youplease confirm the the Asset Class (the one linked to the asset you are using for carrying out down payment with T.Code F-48) has been set-up in configuration as an AUC asset class. Check on T.Code OAOA for the radio button selected for Status of AUC.
    In case your Asset Class - which is Plant & Machinery - has been set up as "No AuC or summary management of AuC" i.e. has been set-up as a final asset class then you will get the error.
    Solution Options:
    (1) Either change the Asset Class set-up (using T.Code OAOA).
    Please note - you might not be permitted/able to do this if the system already has posted transactions for this asset class.
    (2) Carry out the downpayment for an AUC Asset (create an AUC Asset using T.Code AS01). Carry out F-48 for this. Later settle this AUC asset to the required/relevant final asset (using T.Codes AIAB and AIBU).
    (3) Specify your Asset Class as available for carrying out DownPayment transaction. Use T.Code OAYB and for Transaction Type Group 15, include/add a new entry for your asset class.
    (4) Ensure that the Account Determination linked to you asset class (check this in T.Code OAOA) has been correctly and adequately set-up for GL account determination (use T.Code AO90).
    Hope this helps.
    Regards,
    Ruchi

  • Internal order not coming automtically in asset purchase order

    Hi!
    I have created one asset under construction and internal order number is assigined in AUC in tabl Origin.
    Budget is maintained for that internal order.
    But when I am creating the asset purchase order for that AUC, system is not automatically picking up the Inernal order, even though internal order is assigned in the asset master.
    I have created Asset acquisiton GL accounts as statistical Cost elements.
    can you help me why system is not automatically picking up the internal order?
    regs,
    ramesh

    Hello
    in ACSET, ANLA-EAUFN also,
    Have you ticked the account assignment field also....
    regards

  • Asset purchasing order invoice verification error

    Hi expert. I meet a problem about asset purchasing order invoice verfication. the detail as below:
    1. creat the purchasing order, the account assign category is 'A'. passed
    2. goods receipt.passed, the material document created.
    3. infoice verification. when simulate the finance document, the debit is the vendor (no problem), but the credit is empty (it should be the asset number which selected in PO). the document error.
    what can I do to solve the problem, thanks!

    HI, thanks for your reply.
    reference PO have been typed and balance is zero. when simulate the document, there is only the debit (vendor), no credit (asset).
    this function is good yesterday. I don't know who change the configuration today, I think it must be some config change lead to this problem.

  • Documentation for Asset Purchase orders and Servicess

    Hi,
    Plz give me documentation for Asset Purchase orders and Servicess

    Hey check it in Building block library
    http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
    Regards,
    Raman

  • How can i see the Asset purchase order & GR after settlement

    Hello Gurus,
    Would you please tell me how can i check the Asset Purchase order, which is settled (WBS Element)? How can i see the GR document for the specific asset? & if i treat as a expeneses toward the project where i get the GR/ PO in asset explorer?
    Warm Regards,
    Dhananjay Rahane.

    Dear,
    Dhanajay.
    Purchase order related to asset you can see in Asset Master itself. Go to AS03 - Environment  ( Menu bar ) - Click on Purchase Order. Here you will have all the relevant PO's relating to asset.
    GR you can see in PO at a Purchase Order history. The data relating to asset you can  see in left hand side navigation in AW01N Asset Explorer. Like as Vendor, PO's, etc.
    WBS in PO you can see in Account Assignment Tab if your PO is created with N. ( Network PO ). WBS linked to Network you can see in CJ20N ( Project Builder ). 
    WBS Actual values can see in report CJI3 Actual Cost & Revenues.
    I hope this helps you to solve your issue. If you have any doubts feel free to share.
    Regards,
    Pankaj A Bhalerao.

  • Error message in down payment on asset purchase order

    Hello,,
    While i am trying to make down payment request with reference to PO have asset number it is return an error message
    *Store a cost element for credit down payments
        Message no. KI165
    Diagnosis
        You posted a payment to a CO-relevant object (cost center, order, and so
        on). The payment is therefore recorded in CO.
        If a payment has no order reference, no consumption account can be
        derived. Therefore, CO posts the payment under a default cost element
        created and stored during Customizing.
        You have not yet maintained this default in the system.
    Procedure
        Maintain the default cost and revenue elements in the Implementation
        Guide under "Project System" for controlling area CA00.*
    I don`t know what is the reason for using this cost element and which type of cost elements that i can use in this issue....
    We are not use Down payment clearing account, because Our customer don`t need this account..
    Please help me ASAP
    Thanks for your cooperation
    Hussein

    Hello Hussein,
    For error message KI165,please maintanin default cost  element in OKEP.Down payments have to be posted in CO with cost   elements. In case of purchase orders (or open items in CO), the cost  element for consumption can be derived from the purchase order. Thus the  down payment in CO is posted with the consumption cost element.                                                                               
    If the  down payment does not have any reference to a purchase order, then the cost element for which the consumption will be posted is not known.  In this case, the cost element maintained with OKEP is used.                     
    The error message KI165 will occur if no cost element is maintained with  OKEP - not regarding whether the actual down payment has a reference to  a purchase order and thus will update in CO under the consumption cost element derived from the purchase order.  This is always a  source of  misunderstanding - but I hope it is clear now.                                                                               
    OKEP configuration is absolutely necessary if you do not have  a cost element assigned at the time of downpayment request creation.                                                                               
    If after maintaining the default cost element you get some other error  then please note that you would need to check the following :                                                                               
    1.Compare the configuration settings for the GL accounts that are  used for posting the cash call in EHP4 system with the system without the EHP4 support pack.               
    2.Check the controlling area settings in both the systems.        
    Regards Bernhard

  • Down Payment for Assets Purchase Order and depreciation

    I have created one purchase order for assets now when i am making down payment against purchase order it pick up asset and post down payment correctly without depreciation. But when i am clearing down payment against the vendor invoice it is reversing downpayment in asset explorer [AW01N] with Transaction Type 180 and calculating depreciation on reversal amount. I am using down payment spl G/l indicate "M" even i tried with "A".
    Can anyone tell me why it is reversing depreciation on downpayment cleared against invoice when original down payment is not calculating depreciation.

    Hi,
       As per as my knowledge is concerned, you should treat the cost element as " Category 90 " , this is a balance sheet account.
       Please check at your end.
    Thanks
    Dasa

  • ASSET PURCHASE ORDER , USAGE DECISION IN QA32

    HI,
    WE CREATE PURCHASE ORDER WITH ACCOUNT ASSIGNMENT 'A ' WHICH IS A ASSET MATERIAL WHICH GOES FOR QUALITY .
    WE DO GOODS RECEIPT AND ASSET MATERIAL GETS CAPITALISED AT GRN STAGE AND IT GOES FOR QUALITY INSPECTION IN QA32.
    MY REQUIREMENT IS , AT QA32 STAGE  RESULT RECORDING CAN BE DONE BUT REJECTION OF PARTIAL QUANTITY CANNOT BE DONE COZ INSPECTION LOT STOCK TAB IS NOT THERE.
    IS THERE ANY POSSIBILITY ?
    REGARDS,
    SOWMYA
    Edited by: sowmyavishwanath on Feb 16, 2011 7:42 AM

    Result recording is very much possible if you have task list in place for the material with usage 5 & you have made necessary setting like "char char " in the inspection type.
    Stock posting is not possible as material gets consume against cost center.that is a reason partial stock posting is also not possible.
    One solution can be partial reversal of consumption against cost center may be through Mb1b-->202 mvt. I am not sure what is exact procedure you follow,but here what I mean is reverse posting through inventory mgt.(from unrestricted stock)
    Edited by: SujitSND on Feb 16, 2011 12:23 PM

  • Error in Asset Purchase Order

    Hi,
    We are in SRM 7.01, EHP1. I created a shopping cart with asset account assignment. Shopping cart created without any problem. When i am creating PO against shopping cart in sourcing cockpit or with source of supply in shopping cart i am getting the following error.
    Line 1: Enter another transaction type (Transaction typedoes not exist)
    Line 1: Error in account assignment for item 1
    And i am not able to create the purchase order. I am able to create the purchase order with all other account assignments for example:  WBS, cost center, Order .
    Please advise where i am doing mistake.
    (N. Kiran Kumar)

    Hi Kiran,
    Please implement the note below in order to solve this issue.
    954904   Follow-on Note of Note 905635
    Also please take a look at the note below.
    1410321  Shopping cart w/ asset acct assignment:Checks are
    Best regards,
    Christian Zeuch

  • Tax Code removed on changing the posting Date in Purchase Order

    Dear All,
    This is with reference to the Purchase Order Document tax part, the document has been defined with the approval procedure and document series followed as annual series. The document series is linked to the period indicator as I am using the monthly series for the A/R & A/P Invoice.
    Now some Purchase Order was generated in the last month i.e. 30 NOV 07 which has gone for approval. These document are approved in the current month (Dec 07) & user are trying to add the records it displays the message as "Date deviates from permissible range [Purchase Order - Posting Date]  [Message 173-11]" as the period indicator is changed to Dec 07 in document numbering.
    The problem is when user changes the document date to Dec 07 for posting; system removes the tax codes, which is available in the document. Now as this is approved document user is not able to change or renter the tax codes.
    In this situation what can be done as the same case will again happen for the next month.
    Pls. provide the solution / work around for this problem.
    Regards,
    Yogesh Jadav

    hi yogesh,
    Cancel/Close the created purchase order.
    First you should change docduedate in posting period upto december 2007/end of fiscal year,by following the below path.
    (Administration->sytem intialization-> general settings--> posting period tab)
    Create a new purchase order.
    Send it for approval,authorizer can change date as required,
    once the posting date changes,tax code get refreshed,authorizer
    need to select tax code once again.
    <b>Tax code normally get refreshed when you change posting date it's normal
    system behaviour.</b>
    After authorizer does above changes,he can approve purchase order.
    Once purchase order is approved,orginator can add it as purchase order in draft stauts.
    <b>After approval we can not do any changes in purchase order.</b>
    Hope my solution will solve the problem.
    Thanks,
    With regards,
    A.Jeyakanthan

  • Post changes of Purchase Order with BADI  ME_PROCESS_PO_CUST

    Hello All,
    I have to make changes to a Purchase Order when it is posted. In some cases I have to set the field WEBRE.
    What i tried is the BADi - Method ME_PROCESS_PO_CUST~post.
    Following Code I entered:
    DATA: position TYPE PURCHASE_ORDER_ITEM,
            tab_pos TYPE PURCHASE_ORDER_ITEMS,
            position_data TYPE mepoitem,
            xcheck TYPE MMPUR_BOOL,
            kopf TYPE REF TO CL_PO_HEADER_HANDLE_MM,
            position_check TYPE mepoitem.
      CLEAR: kopf.
      tab_pos = IM_HEADER->get_items( ).
      xcheck = IM_HEADER->IS_CHANGEABLE( ).
      TRY .
        kopf ?= IM_HEADER.
      CATCH cx_sy_move_cast_error.
      ENDTRY.
      IF kopf is  NOT INITIAL.
         kopf->MY_CUST_FIREWALL_ON = 'X'.
      ENDIF.
    LOOP AT tab_pos INTO position.
      position_data = POSITION-item->get_data( ).
      xcheck = POSITION-item->IS_PERSISTENT( ).
      IF position_data-werks(1) EQ 'D' OR
         position_data-werks(1) EQ 'G' OR
         position_data-werks(1) EQ 'P' OR
         position_data-werks(1) EQ '1'.
      ELSE.
        IF position_data-wepos = 'X' and position_data-UMSON is initial.
          position_data-webre = 'X'.
          POSITION-item->set_data( position_data ).   "write data
        ENDIF.
      ENDIF.
       position_check = POSITION-item->get_data( ). " check if it is written
    ENDLOOP.
    Now my Problem is, that my changes in  position_check are ok, but they are not written to database and I don't know why.
    I have made the changes with TA ME22n.
    I also tried ME_PROCESS_PO_CUSTcheck and ME_PROCESS_PO_CUSTprocess_item. With method process_item it is written to database, but it is not the right point of time. I just want these changes when the purchase order is posted.
    Got anybody an idea, maybe another Exit, Badi or what I'm doing wrong?
    Best regards,
    Ronny

    HI
    Try using this BADI
    ME_PURCHDOC_POSTED - Define Follow-On Processing for External Purchasing Documents
    We have used this BADI for updating the fields in the header and item level; after posting
    Thanks & Regards
    KK

  • Total weight of a post item in purchase order message

    Hello !
    I want to write in the sapscript form used to edit the purchase order the total weight of a post item.
    I found in the table EKPO the net weight, but iti is the weight of one article and not of the whole post item.
    Does someone know how I can get this information (in which table or structure that is filled the MAIN element of the form) ?
    I could multiply this weight by the ordered quantity but it seems not to be possible directly in the form and I want to use the standard program for my sapscript.
    I precise that my form is an copy of the standard form MEDRUCK.
    I thank you a lot for your help.
    Regards,
    Céline J.

    Any idea ?

  • GR/IR Posting Error CKMLGRIR025 - Purchase Order History Inconsistent

    Hi Everyone.
    We currently have a posting in our GRIR for a Feright Condition Value against a Purchase Order which gets the above error when trying to post in MR11.
    The Diagnosis of the error reads:
    "The purchase order history contains differences between the goods receipt and invoice receipts/Account maintenance for the order item in the field Difference Quantitiy (= 43.804 TO) and Difference Value (= -342.77)
    The purchase order history for this tiem is inconsistent"
    When looking at this Freight Condition information in the Purchase Order I can not see why this item has resulted in this error in MR11.
    Has anyone else seen this error come through in their system, and do you have any ideas on how to fix this.
    Thanks
    Hayley

    We are experiencing the same issue with the GRIR Posting Error CKMLGRIR025 - puchase order history inconsistent.  The actual message that we receive is Puchase Order history already inconsistent -->Quantity 1.00 EA Value 0.65-USD.
    We reviewed SAP Note 708649 which also recommends using transaction MIRO with the corresponding default quantity and value o.  However, we are not able to enter an Invoice for the "default qty & value 0", as SAP gives me error message M8278 "You are not allowed to have zero lines" (just like Haley commented).  In reviewing this thread, I did not find the solution to the error message M8278 "You are not allowed to have zero lines" .  Could someone help me understand?
    Thank you!

Maybe you are looking for