Down Payment for Assets Purchase Order and depreciation

I have created one purchase order for assets now when i am making down payment against purchase order it pick up asset and post down payment correctly without depreciation. But when i am clearing down payment against the vendor invoice it is reversing downpayment in asset explorer [AW01N] with Transaction Type 180 and calculating depreciation on reversal amount. I am using down payment spl G/l indicate "M" even i tried with "A".
Can anyone tell me why it is reversing depreciation on downpayment cleared against invoice when original down payment is not calculating depreciation.

Hi,
As per as my knowledge is concerned, you should treat the cost element as " Category 90 " , this is a balance sheet account.
Please check at your end.
Thanks
Dasa

Similar Messages

Documentation for Asset Purchase orders and Servicess

Hi,
Plz give me documentation for Asset Purchase orders and Servicess

Hey check it in Building block library
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
Regards,
Raman

Error message in down payment on asset purchase order

Hello,,
While i am trying to make down payment request with reference to PO have asset number it is return an error message
*Store a cost element for credit down payments
    Message no. KI165
Diagnosis
    You posted a payment to a CO-relevant object (cost center, order, and so
    on). The payment is therefore recorded in CO.
    If a payment has no order reference, no consumption account can be
    derived. Therefore, CO posts the payment under a default cost element
    created and stored during Customizing.
    You have not yet maintained this default in the system.
Procedure
    Maintain the default cost and revenue elements in the Implementation
    Guide under "Project System" for controlling area CA00.*
I don`t know what is the reason for using this cost element and which type of cost elements that i can use in this issue....
We are not use Down payment clearing account, because Our customer don`t need this account..
Please help me ASAP
Thanks for your cooperation
Hussein

Hello Hussein,
For error message KI165,please maintanin default cost element in OKEP.Down payments have to be posted in CO with cost   elements. In case of purchase orders (or open items in CO), the cost element for consumption can be derived from the purchase order. Thus the down payment in CO is posted with the consumption cost element.
If the down payment does not have any reference to a purchase order, then the cost element for which the consumption will be posted is not known. In this case, the cost element maintained with OKEP is used.
The error message KI165 will occur if no cost element is maintained with OKEP - not regarding whether the actual down payment has a reference to a purchase order and thus will update in CO under the consumption cost element derived from the purchase order. This is always a source of misunderstanding - but I hope it is clear now.
OKEP configuration is absolutely necessary if you do not have a cost element assigned at the time of downpayment request creation.
If after maintaining the default cost element you get some other error then please note that you would need to check the following :
1.Compare the configuration settings for the GL accounts that are used for posting the cash call in EHP4 system with the system without the EHP4 support pack.
2.Check the controlling area settings in both the systems.
Regards Bernhard

Depreciation is calculated on Down payment for asset

Dear friends,
While i am making down payment for Asset to the vendor through transaction code F-48, the depreciation is calculated on the advance amount what i posted.
Please advice me ???
Regards
Mrutyunjaya

Dear Bernhard,
This setting is for new document. what about my old document which has already been given advance to the vendor and depreciation is calculated.
Ex- I have given Advance to the vendor for Asset on 22.01.2009 of Rs 165000 and depreciation rate is 4.75%, and on 16.02.2009 i receive the Asset from the vendor and invoice cleared against advance. System is showing bellow value.
Date         Amount               Dep Value
22.01.2009   Rs. 165000           Rs. 1959-
16.02.2009   Rs. 165000           Rs. 1959
Please advice me how to make rectification of depreciation amount on that asset.
Regards
Mrutyunjaya

Down payment for asset plant and machinery

Dear Experts,
Can any body help me,   i have one issue user posted one asset po , in po asset is assigned,    now they are posting to that po some advance through f-48,   my asset class is plant and machinery, with No AUC option ,   this advance amount is posting to asset also and caluting deprection,   it should not post to asset and calculate depreciation.
regards
chandu

Dear AP,
thanks for your reply, my p.o account assignment is asset "A".   i need to track the down payament in P.O history.
In t.code F-48 second screen p.o reference we are giving automatically what we asset no. assing in p.o that is displaying.   If i revome also again it is coming and posting to asset and caluclting depreciation.   please suggest without post asset how to do the down payment for asset p.o.
please suggest
Regards
Chandu.

Down payment report by purchase order

Hi,
Is there any report available to see the down payment/down payment requests by purchase order.
I am trying to execute the transaction code ME2DP but it does not exist. We are in ECC 6.
Please note we cannot use FBL1N (noted item/sp GL) as there is no PO in selection.
Regards
Shanif

HI,
You can try using Transaction code: ME2N with Scope of List 'BSET' and Selection Parameter which has option Down payment validation. If such selection parameter is not available in your system than you can create it using below path:-
SPRO - Materials Management -Purchasing -Reporting -Maintain Purchasing Lists -Selection Parameters
Please find below screen shot for the same:-
ME2N
SPRO Path- (Selection Parameters)
Regards,
Anand Raichura

Error when posting invoice for Asset purchase order

Hi,
we are getting the errore message account determination for asset posting with keys not defined in chart of accounts,when posting an invoice for asset purchase order.
Can any one see why this error is coming and what will be the solution.
Nagesh

Hi Prabhakar,
Here is the reply,
we have 10 line items,in which 3 items are freight related and other 7 items are related to goods reciept.
i am trying to enter invoice for 3 line items at a time with two relevant to goods reciept and other related to non goods receipt(freight related).
accounting entries generated after the GR are as follows,
asset under construction account,and GR/IR account.
Let me know the details is sufficient or not.

Payment terms of Purchase Order and F-47

Dear All,
How can we link Payment terms of Purchase Order and Advance Payment made thru F-47.
i.e if we have given payment terms in Purchase ORder as 50% advance then by advance payment (F-47) we shall allow to pay only 50% of Purchase Order value as advance.
How / where can we define this type of setup.
Regards
Swati

hi,
There is no way in the system to restrict the payment amount to 50%once, it is mentioned in the payment terms as 50% advance. System does not have control tocheck and avoid the full payment
Rgards
Uma

Automatic account postings (for Intercompany Purchase order and Sales order

Hi all,
I need some help related to the automatic account postings (for Intercompany Purchase order and Sales order)which i can set for the follwoing scenarios. I have looked on the forms and searched alot but not able to a single solution to solve both the pupose. if one scenario works the other doesnt. Please advise.
I have created the master data
Customer receiving--G001
Sales Org.--GXIN
Distr. Channel- 01
Division - 00
Company code receiving - G1
customer supplying- V001
company code for supplying- V1
2 different scenarios
1- Intercompany Purchase order in which a Customer receiving- G001, gets stock replenishment NB purchase order from supplying company V1- GI and GR of stock is done. Biling document for customer receiving G001 is created. But now I need a way to do the opposite side posting at the supplying customer -V001-- this I do using an Idoc which creates a Invoice receipt for creditor(supplying customer) V001.
2. Sales order-- A customer X001 of company code G1 buys stock from the company code V1. the customer G001 of company code G1 bills the customer X001, but the intercompany billing doc/ invoice is created for the customer G001 by company code V1. then now i want an automatic account posting to be created at the supplying customer V001 via idoc.
Can this be achivable via Idoc with automatic account postings.
Please let me know if it doesnt make sense. thanks to all in advance
cheers
Jasmeet

Hi all,
For the Sales order and automatic posting we have created an output type ZR4N- this is creating a batch input session which can be triggered to be processed autmatically.
For the intercompany Purchase order -from Invoice we are creating a different output RD04 (sap standard) which creates invoice receipt at the vendor side.
Rest of the settings are defined using SAP standard functionality within transaction OBCA, OBCB, OBCC, OBCD,OBCE
thanks for viwing the post
Cheers
Jasmeet

Down payment (F-48)   for Asset Purchase Order

Dear Experts,
Please guide me,   i am getting one error while doing down payment to vendor through F-48 ,    I created one asset purchase order, against purchase order making down payment that time i am getting this error message
"You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 401006 (chart of depreciation WCCD). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset. "
my asset is plant and machinery, any configuration is required.
as per my knowledge i checked in T.code : OAYB   transaction type groups   15 only assign AUC asset class and Capital Advance.    In account determination balance sheet accounts   there is Acquistion : Down payment   and Clearin G/lL for Down payment   g/l a/c not assign .
SAP F1 help in that field (above said) is saying that only for AUC.
Please guid me ,   What to do.
Thanks & Regards
Chandu

Hi Chandu,
Can youplease confirm the the Asset Class (the one linked to the asset you are using for carrying out down payment with T.Code F-48) has been set-up in configuration as an AUC asset class. Check on T.Code OAOA for the radio button selected for Status of AUC.
In case your Asset Class - which is Plant & Machinery - has been set up as "No AuC or summary management of AuC" i.e. has been set-up as a final asset class then you will get the error.
Solution Options:
(1) Either change the Asset Class set-up (using T.Code OAOA).
Please note - you might not be permitted/able to do this if the system already has posted transactions for this asset class.
(2) Carry out the downpayment for an AUC Asset (create an AUC Asset using T.Code AS01). Carry out F-48 for this. Later settle this AUC asset to the required/relevant final asset (using T.Codes AIAB and AIBU).
(3) Specify your Asset Class as available for carrying out DownPayment transaction. Use T.Code OAYB and for Transaction Type Group 15, include/add a new entry for your asset class.
(4) Ensure that the Account Determination linked to you asset class (check this in T.Code OAOA) has been correctly and adequately set-up for GL account determination (use T.Code AO90).
Hope this helps.
Regards,
Ruchi

Down payments for Asset Under Construction

Hi Experts,
Urgent!
My client paying advances to vendors, thru TC-F-48.
Previously there is no PO requirement ,now asper client requirement I put PO fild as requirement in posting key 29.
1)There is no problem for payment to vendors -for Raw materials.
2)while paying advance to vendors - for Asset Under Construction, system showing error.
*Error is:
Contact your system administrator (table error)
Message no. AA866
Diagnosis
No account has been entered for posting down payments in area 01 under the account assignment key 4800 (chart of accounts FTL).
Procedure
Enter the account using the Customizing menu.
Pls Reply frinds.
Regards
vinod

Hi Vinod,
I hope that you are following Valuated goods receipt concept.
Valuated goods receipt: Asset will be debited at the time of goods receipt
Non valuated good receipt: Asset will be debited at the time of invoice receipt
If you follow valuated goods receipt concept, then at the time of making down payment, AUC should not be debited (whatever the value date/ capitalization date be). Please refer SAP note number 310368 (valuated goods receipt paragraph) for reference. In that they have clearly mentioned the steps to make down payment against asset under construction Purchase Order without debiting to AUC and without any error message. You have to make F5 378 message number from error message to warning message and in posting key 29 and 39, you have to supress the asset related fields. If you have done the above settings, then system will not show any error message to update G/L account in AO90 transaction code for the Acquisition: down payments and Down payment clearing - 2nd and 4th field or for AUC related fields.
Hope this helps. Assign points if useful.
Regards
Dwarak.

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

Regarding Down Payment against Asset purchase

Hi SAP GURU
i have one queries regarding down payment made against asset puchase order
I created one asset code, create the PO with accoun assignment categories A, made a advance payment against reference to this PO no .
Now the problem is , asset capitalised date is automaticaly come same as down payment date and it is reflecting in asset explorer , T code - AW01N.
Can any body suggest what is the right way for the whole scenarion , or i am making some mistake .
Is there any config setting i am missing.
Please help me out , issue is very critical.
Thanks in advance.
Regards
Anjan

Hi Anjan,
From your below query, I infer that you have created asset PO and made down payment against PO without goods and invoice receipt. Am I right?
Are you following Valuated goods receipt or non valuated goods receipt concept?
Valuated goods receipt: Asset will be debited at the time of goods receipt
Non valuated good receipt: Asset will be debited at the time of invoice receipt
If you follow valuated goods receipt concept, then at the time of making down payment, asset should not be debited (whatever the value date/ capitalization date be). Please refer SAP note number 310368 (valuated goods receipt paragraph) for reference. In that they have clearly mentioned the steps to make down payment against asset PO without debiting to asset and without any error message. You have to make F5 378 message number from error message to warning message and in posting key 29 and 39, you have to supress the asset related fields. If you have done the above settings, then system will not show any error message to update G/L account in AO90 transaction code for the Acquisition: down payments and Down payment clearing - 2nd and 4th field.
Here we are following the valudated goods receipt and initially I faced the same issue and we sorted out after following the steps mentioned in the above sap note number.
Hope this helps. Assign points if useful.
Regards
Dwarak.

How to post the Down payment for assets using the investment measure?

Hi,
We want to post the down payment using the investment measure for some of the assets. Please tell me how to post it and how to clear it.
I have searched the net but till now I am unable to find something with which I can do that.
Thanks in advance...
Regards
Nitin

Hi,
Please reply as I am facing problems with posting the down payments using the investment measure and I have tried and read alot but nothing as such I have been able to found.
Thanks and Reply
Nitin

Table for open Purchase order and pending invoices for vendors

Hi,
Are there any table to know open Purchase orders and pending invoices for vendors.
Quick response will be appreciated.
Thanks & Regards

hi,
Purchase Order:
S011:(PURCH: Purch. Group Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Vendor No (LIFNR)
S012: (PURCHIS: Purchasing Statistics)
Statistics (SSOUR)
Version (VRSIO)
Month (SPMON)
Day (SPTAG)
Week (SPWOC)
Posting Period (SPBUP)
Purchasing Org (EKORG)
Purchasing Group (EKGRP)
Material No (MATNR)
Plant (WERKS)
Info Record Category (ESOKZ)
Material Group (MATKL)
Info Record (INFNR)
Country (LAND1)
EINE: (Purchasing Info Record: Purchasing
Organization Data)
Info Record (INFNR)
Purchasing Org (EKORG)
Info Record Type (ESOKZ)
Plant (WEKS)
EKET: (Delivery Schedules)
Purchasing Doc (EBELN)
Item (EBELP)
Delivery Schedule (ETENR)
EKPO: (Purchasing Document Item)
Purchasing Doc (EBELN)
Item (EBELP)
EKKN: (Account Assignment in Purchasing
Document)
Purchasing Doc (EBELN)
Item (EBELP)
Account Assignment (ZEKKN)
EKKO: (Purchasing Document Header)
Purchasing Doc (EBELN)
EORD: (Purchasing Source List)
Material No (MATNR)
Plant (WERKS)
Source List No (ZEORD)
thx,
Ganpat

Down Payment for Assets Purchase Order and depreciation

Similar Messages

Maybe you are looking for