Posting date field in reports S_SMC_47000016 / S_SMC_47000017

Hi all,
We are using the serice desk function for monitoring the support tickets. I have one quert related to List of notification transactions S_SMC_47000016 / S_SMC_47000017.
In the service desk whenever we run the report of all open notificaitons (S_SMC_47000017) Or Find Support Notifications (S_SMC_47000016), in the list output we do not get any data in the field "Posting Date". We do get the date in field "Valid From", but no information is getting populated in posting Date column.
If we try to search the notifications using the T Code " CRMD_ORDER" and try to get the list of notifications in the find Tab, then here the posting date gets populated.
Could you please let me know if there is any setting which is preventing from Posting Date to be populated in the T Codes S_SMC_47000016 / S_SMC_47000017.
Thanks and Regards,
Narendra

Hi,
We have chnaged the layout already, my question is that in the layout the posting date column is appearing, but the posting date is not getting updated for any notification in the output. The column remains blank.
Thanks and Regards,
Narendra

Similar Messages

Making Posting date field Mandatory in DP91 screen

Hi All,
Is it possible to make the posting date field mandatory in the DP91 screen.
Currently if the posting date is not specified, system will always consider the current date as posting date and picks the appropriate actual line items.
Is its possible to make the posting date field Mandatory through standard way or if not through exit.Pl suggest
Regards
SB

Hi All,
By Mistake I have typed wrongly.The requirement is
In DP91 screen the current date is populated in posting date to field by default. But the user want it should be empty and they will key in the date.The reason behind is if they will always raise the Billing request for the previous month and by mistake if they executed DP91 for current date it will be an issue.
Regards
sb

Any selection input for posting date in Confirmation Report CN48n

Hi All,
Is there any way to select some date based on posting date in CN48n report, because if i have run by Plant / co.code it takes so long.
Plz advice.
Cheers,
Nies

Hi,
The only option I found out is "Data on Dates Definition -- Finish Date" in dynamic selections.
This including the Plant & Company Code selection will not exactly meet your requirement but of course can definitely reduce the search load on the system.
regards

GRN Document Date / Posting Date Field Mandatory or Freeze

Dear All,
We have four Company Codes with single Chart of Accounts. we required to make GRN Document Date / Posting Date Field Mandatory or freeze on current date for only one Company Code. Can it be possible through Standard Configuration?
Regards,
Majid Khan

what exactly we say Document Date & Posting Date
Just type in google difference between document date and posting date and execute. You will find lot of threads discussed on this topic. Please dont post any query without searching the forum or google.
G. Lakshmipathi

Discoverer 2000 : Problem in sorting date field on report

Hello,
I am not able to sort on date field on report
it is giving error as
( illegal operation).

Thanks Savitha.
I found one more way of making that code work, just want to share this.
If we add the following statement, the same code works without having to add the time part along with date.
"DBMS_XMLSave.setdateformat(updctx, 'yyyy-MM-dd');"
note the format is case sensitive. Instead of MM, if you give 'mm' it won't work, it uses java format.

Posting date in aging report-PLD

Hi,
I am trying to get posting date in my aging report-PLD but system is not showing any date in the field
I have selected the database and posting date in the content and linked to doc no even then there are no results
I am also trying to get docentry in PLD it doesn't display
I need to relate to doc entry from OINV instead of doc number for posting date as the doc num is repeated every year
Thanks
Md.nazeer Shaikh

Hi,
PLD is a simple tool. Some of them are hard coded such as aging report-PLD. You need crystal report or some other tools to reach your goal.
Thanks,
Gordon

Posting date field is coming in Travel Request Application

Hi
WD component - FITV_FPM_START
Application - FITE_REQUEST
"Posting Date" is coming in QA system but not Dev system and this field is not required at all but surprisingly coming in QA .
Please let me know how this field is coming in the one system and not in the other and how we can hide this ?
Please see screenshot -
T&R
Vishwas

Hi Vishwas,
Go to this spro path : Travel Management->Employee Self-Services->Interface Configuration for Web Dynpro Interface in Travel Management->Schema and Single Field Control for Web Dynpro.
Select the schema, Domestic or international. and expand it.
You will find the posting date under general data. Double click on posting date. By default the radio button will be standard display, Select the check box alternate display and uncheck the checkbox field is dispalyed.
Now save and move the TR.
Posting date will be removed.
Thanks,
Namsheed.

"Posting Date" field blank by default

Hi!
Is there any way, in transactions FB60 and F-43, so that field "Posting Date" is displayed blank whenever the user executes them? By default, this field displays the current date.
Thank you
Lucia

Hi Lucia,
The SAP standard defaults the value of the posting date automatically and it is not possible to remove this default value in BUDAT.
However, it may be possible to use a substitution to get your desired result. You can check note 42615 for information purposes.
Best regards,
Cintia

Date field in Reporting

Hello all ,
We need to display the Start date and the End date along with the time taken to complete the project in a report. I have created a measure called date and the type is a text field. I was able to load data into the date field. But , I am unable to bring the date field into the report. There is a error which is coming. Is it possible to display the date field in the report / KPI ?
Thanks
Vijay

Hi Ricardo ,
I am trying out both the methods. My client is a infrastructure company. It has a number of projects . The client wants to monitor the performance of each of his projects and the overall Delay. My requirement is to display a report which has the actual start date , planned start date , actual end date , planned end date , actual , budget and delay.
I tried to load the date fields into the PAS as a text field. The data load was successful. But when designing the report , I am getting an error. Is it a problem related to text variables ? Is it possible to bring the text variables onto the UI ?
Is there a way to build a report on the data from initiatives in SSM ? Do we need another reporting toll to achieve the same ?
Thanks
Vijay

How to place a sign like '.' in front of a data field in report builder ?

Hello Everybody,
In the presentation of datas in my report , I must list the sub-elemnst of a group by plcaing a ' *.* ' in front of each one. Like
Persons
*.* Jean Fontaine
*.* François David
*.* Serena Joyau
How must I process to do it ?
Helps.
Regardly.

Thanks Vikas.
I do it as
SELECT ALL '.' || V_PRESTATAIRE_MALADIE.NOMBENEF, V_PRESTATAIRE_MALADIE.ADREBENE,
V_PRESTATAIRE_MALADIE.TELEBENE, V_PRESTATAIRE_MALADIE.LIBDETLI
FROM V_PRESTATAIRE_MALADIE
But in the field 'NOMBENEF' , more data does not appear. And too when I want to increase the lenght of the signal '.' or put it(the signal) in bold face , I have not possibility.
There has not other mean do realize it ?

Hyperlink on data field crystal report vs 2005

Please help!!!!
I can not set the hyperlink on a data field in *.rpt.
I also set the hyperlink type was A website on internet and filled the website address. But when report display i can not see any link.
Thanks in advanges,

Hello,
(from CR Help file)
You can select a report object on the Design or Preview tab and create a hyperlink to another location.
The hyperlink is saved with your report and is available to other users as a way of viewing additional information.
Note:    Crystal Reports also lets you create hyperlinks with Relative URLs, so your web reports retain independence from their location on any particular server.
To create a hyperlink field
Select a report object on the Design or Preview tab.
On the Format menu, click Hyperlink.
The Format Editor dialog box appears with the Hyperlink tab active.
Click the type of hyperlink you want to create.
The available types in the upper area are:
No Hyperlink
This is the default option. There is no hyperlink associated with the selected report object.
A Website on the Internet
Select this option if you want your report object to be linked to a static web address. Use the formula button to create a URL based on a field value. For example, you might enter the following formula if your Customer Name field contained information that would create a series of meaningful URLs:
"http://www." + {Customer.Customer Name} + ".com"
Note:    You can also use this option to connect to Business Objects, Web Intelligence, and OLAP Intelligence documents (this is also known as report linking). Use the openDocument function to create these hyperlinks in Crystal Reports.
Current Website Field Value
Select this option if you want the program to create a hyperlink out of the field you selected. The field must be stored as a proper hyperlink in your data source.
An E-mail Address
Select this option if you want to create a "mailto" address from the field you selected. Use the formula button to create an address based on a field value.
A File
Select this option to create a hyperlink to a file on a specific computer or networked computer. Use the formula button to create a file path based on a field value.
You can also use a hyperlink of this type to run an EXE with a command-line parameter. Enter the path and application name, and follow it by the parameter for the command.
Current E-mail Field Value
Select this option if you want the program to create an email hyperlink out of the field you selected. The field must be stored as a proper email address in your data source.
The available types in the DHTML Viewer Only area are:
Report Part Drilldown
For information about how to use this option, see The Report Part Drilldown option.
Another Report Object
For information about how to use this option, see The Another Report Object option.
Note:    Not all hyperlink types are available at all times. The object you select and its location on the report determine which types are available.
After you have chosen a hyperlink type, enter the appropriate hyperlink information (the URL of a web site, for example).
Click OK when you are finished.
The hyperlink is inserted as appropriate. Click it on the report to go to the web site, to send an e-mail, and so on.

Data field in Report Designer

Hi Experts,
I am trying to create a report. I have used a query as data provider. I was wondering if I can use formulas(adding, multiplying...) in report designer as user wants to see calculated values in the report. Could you please let me know how to achieve that in Report designer as I have noticed that all cells are identified as texts.
Many thanks in advance
Regards
Shanthi

Hi Vachan,
this is where i am confused. So you are saying that I can not do any manupulations(like dividing a value by 1000) in Report Designer then??
Just to be clear,
Say in Excel, while formatting, we can perform functions using one cell referrence in another. cell2=cell1*1000 where as cell1 is part of the query result and cell 2 is calculated after cell1 does.
Regards
Shanthi.
null

Date field - Hourly report

Hello All,
If I have a table 'TMP_LOGING' with a date column 'Created' and a number column 'LOGINS', how can I pull hourly logins from these table?
Thanks!

Hi,
If you pass a 2nd argument to TRUNC (dt), it (basically) returns the DATE that is like dt as far as the 2nd argument specifies, but with all the smaller time divisions set to their lowest possible values.
SELECT        TRUNC (created, 'HH')     AS hour
,        COUNT (*)                  AS total_logins
FROM        tmp_loging
GROUP BY   TRUNC (created, 'HH')
ORDER BY   TRUNC (created, 'HH')
;If created is
June 18, 2010 14:09:48, then TRUNC (created, 'HH') returns
June 18, 2010 14:00:00.
That is, since the 2nd argument was the format specifier for hours, the hour of the two DATEs, and all the larger time divisions (day, mont, and year) are the same, but the smaller time divisions (minute, second) of the value returned are as low as they can possibly be.
Edited by: Frank Kulash on Jun 18, 2010 2:04 PM
Added explanation.

SES report based SES sheet and Posting date wise

Hi All,
Please let me know is there any standard report is available to view the SES sheets created against a PO and within a date range (posting date based).
I have tried below T-Codes but i am not getting Posting date field in these codes.
1.ME2S
2.ML84
3.MSRV6
Regards,
Bhadra

May I know what do your mean by posting date ?
When you accept the SES, at that time you can see posting date..
Either there are two date you can see in SES,
1. Document Date , 2. Created Date.
The document date will shows in every report..
But Created date will available only in table level..
Check table ESSR, Here you will find entry date, SES number and PO number also..
Regards
Dev

Chart report Condition fields and Data fields

Hi all,
i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
while adding more condition fields and data fields, i feel its not showing meaningfull data.
can anyone explain how the condition fields and data fileds are manipulated by crystal report.
i am using CR XI R2 Server.
Thanks
Padmanaban V

i am using Crystal Report XI R2 RAS Embedded in my server.
as we can add any number condition fields programatically using the method
ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
Thanks in advance
Regards,
Padmanaban V
Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM

Posting date field in reports S_SMC_47000016 / S_SMC_47000017

Similar Messages

Maybe you are looking for