Posting datewise report needed MCE5

Hi
To get the report MCE5 by posting date what table I should refer to create Zreport.
Thanks,
Kiran

What logicshould i tell to abaper.
for example if material no. in mce5 = material no. EKBE then accumulate data in report mce5 report posting datewise for the field menge from EKBE.
is that logic is correct.

Similar Messages

Report needed to conbine stock movement and corresponding balance

Hi Friends,
End user need a report to show stock movement trasaction and it's coresponding stock balance.
In MB51, we can see all the stock movements against one material, is there any way a report could show stocks' corresponding iventory balance under diffierent invenotory category (unrestriced,QC, Return and block) for each movement trasaction ?
Report needed like below
SLoc , MoveType , Material document, posting date, qty, unrestic bal, QC balance, return Balance, Blked Bal.
Thanks,
L

Hi,
Kindly take the help of abaper and create a customized report or also you can have query created in SQ01.
Hope this will help you !!!
Regards,
Krishna O

BW upgrade - pre and post upgrade reports

Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
Kalyan

I re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan

Extending the beta! How to compose and post defect reports.

There is no such thing as bug-free software, and LR is no exception to that. Even more, v1.0 releases, even those with long beta programs, can be more brittle than expected. We've already seen a few things that look like real defects which could be addressed in a future release. This is normal and expected, and now a team at Adobe will be dedicated to maintaining the LR release into the future.
This posting is sort of asking the question "how can we help", with a fair bit of opinionated ranting of my own on the subject. Take my comments with a grain of salt, of course, but I'm not sure I say anything that hasn't already been said a million times before.
Firstly, is there a place where bug reports should be posted that Adobe will see? Is there a document that describes how Adobe would prefer such reports to come in, perhaps with suggestions for supplemental material they'd like to see passed along with the defect report? Not only does this provide a place where Adobe can track raw bug reports, it can make perturbed users feel better, since they've been able to do something specific and active.
Full disclosure: I am a software developer by trade, and I maintain shipped releases of code for a living. I know how I like to see problem reports and it drives me *crazy* when a we get a vague report formatted with no punctuation, in all lower-case, containing no specific details. Usually these come with bizarre screen-shots embedded into a Microsoft Word file. Not helpful.
It drives me crazy because I know there is a bug in there somewhere, it just isn't necessarily the bug seen by the end-user or understood at first blush by the developer. I call this the "real bug", and it can be hard to suss out, sometimes.
I assume that the following basics are /probably/ helpful when reporting defects against LR v1.0:
- System details. At least the exact platform version and release. Possibly with a short run-down on CPU speed, amount of RAM. Mac users should probably be sure to clarify what CPU they are running.
- Clear steps to reproduce, if possible. Describe the problem exactly as you see it, being sure to use the language and nomenclature that the application uses. Capitalize app-specific controls exactly as you see them in the app, to make it clear what you are doing.
Try to reduce the problem to the barest set of operations.
- For things like "hangs" and "crashes", I'm guessing that most supported platforms have a way of capturing these details. I cannot and will not speak for Adobe. But! if I was looking at a crash or hang, I'd want any and all crash logs (OS X) or Dr. Watson (Win32) that were related to the former and the sample output (OS X) or Process Explorer dump (Win32) for the latter.
Details on how and where to post defect reports would be nice. Sounds like a FAQ item, at the least!
Finally, here are some things that drive me crazier and I feel are *not* helpful:
- Defect reports that intersperse observed behaviour with guesses about what the problem really is. No one knows better the potential places where symptoms could stem from except those people maintaining that codebase. I'm a smart guy and code for a living. I would never presume to know the precise inner-workings of Lightroom without access to the source and probably a run at it in a development environment.
- Arguing for how terrible or disastrous a particular "bug" is, and how it needs to be addressed as critical for immediate correction. Everyone, including me, finds their own bugs most critical. The problem is that software maintenance requires putting everything into perspective, evaluating each defect on its own merit, as well as how risky a fix for the defect might be. This last part cannot be minimized. Changing code incurs risk. The idea is to carefully shepherd a new release into each new version while maintaining integrity and stability. No matter how bad a bug is, introducing a fix that simply

I agree with how you think bugs should be reported. For now, I'd suggest posting them here, in detail. Some of us can relay them to the appropriate places, at least until we hear from Adobe personnel about an official location or method for the average end user.
Lee Jay

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

My MacBook Pro is running VERY slowly. After reading other questions and responses, I ran an EtreCheck, but do not know how to post the report here. Any help would be greatly appreciated.

Understanding report need backup recovery window ..

Hello,
I have a big database which backed up within several days at night time. The retention policy is "recovery window of 3 days". I've tried to analyze the results of
report need backup;But I noticed than this command return just the list of datafiles having latest backup older than 3 days. I've tried to read again the docs:
>
Reports data files for which there are not sufficient backups to satisfy a recovery window-based retention policy for the specified number of days, that is, data files without sufficient backups for point-in-time recovery to any point back to the time SYSDATE - integer.
>
Please correct me if I'm wrong, but I consider that the ability to make recover to any point in time within 3 days require the backup taken earlier than 3 days ago and archivelogs from the time when backup was taken to the recover PIT. Im I right? If so then how I should interprete the results of report need backup ? I can't find the detailed explanations of this in the docs :(
Thanks in advance,
Constantine

You are correct in your appreciations.
This report is about the need of backups, without considering archivelog backups.
It does not mean that listed files are in an unrecoverable situation.
Regards.

Inventory posting List report

Hello,
I have an A/R invoice posted of an item as its Quantity is 2 in the SAP Business one system. when i go to the Inventory posting list report, this same report only displays the Qty as 1 instead of 2. what could be the reason why this is happening? This problem is specific to this one invoice. The rest of the invoices have correct Quantities displayed in the Inventory posting list report.
Thank you.
Regards,
Maureen.

Hi Peter,
please see these screen shoot for this specific item and the corresponding inventory posting list and also see another invoice of the same item.
pic 1, invoice 90001017
pic 2. its corresponding inventory posting list.90001017
pic 3 the same item , different invoice
pic 4 corresponding inventory posting List for invoice above
note of the differences on the Quantity it displays.
thank you.
kind regards,
Maureen.

Inventory posting list report not shown transaction data

Dear Viewer,
As my english is not good inspite of this i am trying to give you detail where i have stucked in SAP.
As you know there is some standred report in SAP .inventory report is one of them.
when i am going to see inventory posting report in inventory report i am unable to see all transaction .
Like recv qty,issue qty,daily sub total so on somthig like taht.
When i login to other super user id i am able to see all these data.This is happen only one super user id dont know why.
Please help me out regard this.

Hi Divya,
Do this,
->> Login SAP(which user id did not show the issue Qty, rec qty & total) in normal user id.
->> Goto Inventory module.
->> Inventory reports.
->> Inventory Posting List.
-> Run the Inventory Posting List report.
->> Goto Form setting on Menu bar.
-> put the Tick mark in Visible button on Form setting window.
Regards,
Madhan.

Report needed for storage costs in WM

Hi All,
I need a report for the storage costs for utilising the warehouse by plants. Cost of space utilised per m3 will be provided in selection screen. For each material the volume should taken from material master. Warehouse will be utilised by three plants and report needed to calculate the space occupied by the materials in warehouse per plant per month. I am not able to find the logic to calculate average space utilised(as day to day there will putaways,transfer postings and picking).All stocks to be taken into consideration.Let me know how to proceed.
Regards,
Manik

Dear Experts,
Cud u plz throw some light on this...
Regards,
Manik

Stand alone oracle report - need help asap

Hi,
We are in ORACLE Apps 11i. We started using ORACLE BI Publisher to create templates for the Oracle Reports. How we are doing reports now is
1) create data definition XML which has all the queries embedded.
2) Create Data definition in XML Publisher Admin responsibility.
3. Attach the Data definition XML to that.
4. Create a concurrent program definition for the report with XML Type and run the report and save the data file with tags.
5. Create the template ,rtf in Word and export data using ORACLE BI Publisher. 6. Create template definition in the XML Publisher Admin responsibility and attach this .rtf to that and run the report.
Now I have a requirement stating that the REPORT SHOULD BE AN ORACLE STAND ALONE REPORT AND THE REPORT NEEDS TO BE RUN THROUGH CONCURRENT PROGRAM SCREEN. I am planning on doing the following steps.
1. I have to create an .rdf using report builder.
2. Create concurrent program executable and definition for the report.
3. Create data definition in XML Publisher admin responsibility.
4. Run the report in apps.
5. Create the tempalte .rtf in word and export data with the XML Data file with tags,
6. Run the report.
Am I correct? Any help is appreciated asap.
Thanks
Akil

You said,
standalone report ?? is that mean without using bipublisher ??
1st method.
create concurrent program, output xml,
create data template, create datadefintion , attach Datatemplate.
run the cc pgm, get xml, design RTF , create template definition , attach RTF,
run the cc pgm, you get the pdf output.
2nd method.
create rdf,
create concurrent program, output xml,
run the cc pgm, get xml, design RTF ,
create datadefintion , create template definition , attach RTF,
run the cc pgm, you get the pdf output.
, both requires, cc pgm, rtf, data defintion , template definition.
only differnece is , how do you get the data, i mean, xml...
data template or RDF.

RMAN report need backup

We have an incremental level-1 backup Mon-Sat and cold full backup on Sundays with retention policy of 7 days. While troubleshooting some backup issues (space issue, expired backups) I ran the following commands and trying to understand the output.
RMAN> report need backup database;
RMAN retention policy will be applied to the command
RMAN retention policy is set to recovery window of 7 days
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
100 146 /orahprdidx/hprd/psindex05.dbf
RMAN> report unrecoverable;
Report of files that need backup due to unrecoverable operations
File Type of Backup Required Name
RMAN> report need backup days = 7 database;
Report of files whose recovery needs more than 7 days of archived logs
File Days Name
100 146 /orahprdidx/hprd/psindex05.dbf
RMAN> report obsolete recovery window of 7 days;
no obsolete backups found
RMAN>
I looks like I need 146 days worth of archive log files to recover the psindex05.dbf. If so, what I could do to bring that into the 7 days policy?
The database is fine, I am not trying to recover the database.
This was setup by someone and now I am taking over with minimum RMAN experience.
I appreciate any help in this subject.

The datafile was offline. I guess it was created my mistake and hanging in there. Once I do the cleanup it should go away.

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Change COPA Report - need to add Variable and Characteristics

Hello,
I need to change the existing COPA report, Need to add WBS element as a selection criteria and also a characteristics so it can be drilled down. Create WBS as a global variable in KE3E and it is not showing up in when i change the report in KE30 in the available list of characteristics. And also it is not showing up in KE35 when i change the general selection to add as a Variable.

Go to KE91 and create the report.
In KE91, the Characteristic Cost element (KSTAR) is available. Add it as below.
Cost Element .... Check the box Hierarchy node ...... check the box Variable on/off ...... KSTAR...... Cost element.
After this, just check in Variable, the Cost element shuold appear
Line item based reports are defined in KE91 (segment level reports in KE31).
Both types of reports can be started in KE30 and changed in KE32
Let us know if you still have any queries
Thanks
Edited by: nkonnipati on Feb 19, 2012 5:34 AM

Reasons for Introducing database functions for Discoverer Reporting Needs

Hi All,
I would like to know the criteria other organizations have used in creating custom database functions specifically for Discoverer reporting needs. It seems good and appropriate to identify these reasons in order that they have a sufficiently good reason (e.g. in presenting this to a change management board).
Here is a quick swipe:
-query explain plan improvements
-take away the complexity of having the end user deal with complex calculations
-consistency of a value (e.g. a complex amortization calculation)
-an attribute is used from a dependent table with a minimum cardinality of zero
Can anyone list other good reasons in terms of Discoverer reporting?
Thanks,
Patrick
Edited by: Patrick Bacon on Jul 15, 2009 10:30 AM

Hi Patrick
In addition to the reasons you have given the reasons for having functions anyway apply just as equally to Discoverer as they do to other applications.
Typically the main reasons why I would use a function are:
a) due to the complexity of the code, or
b) to evaluate something which an end user either could not do or does not have access to.
For example if a user needs to have aggregations from multiple tables side by side in a report, typically from tables which have no joins between them, I write functions to go get the individual results.
One specific function that I use a lot is one that calculates the number of working days between any given two days. Some of my HR customers use such a function to calculate the number of sick days for an employee when obviously only working days should count. Doing this in a normal Discoverer calculation would be very hard. Retail customers might use this for calculating the number of days it took to ship and item.
There are other reasons why I use functions but these are the typical ones.
Best wishes
Michael

Macbook Air running slow--receiving error message when trying to post Etrecheck report

My Macbbok air is running really slow over the past couple of weeks. I'm pretty new to the world of Macs so not sure what I can and cannot do to improve performance.
I am trying to include the report from Etrecheck in my post, but everytime I paste it and attempt to post I receive a message that says: You have included content in your post that is not permitted.
If anyone can tell me what I am including that is not allowed I will fix it and post the report so I can be helped.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Posting datewise report needed MCE5

Similar Messages

Maybe you are looking for