Posting Depreciation for last year in the current year
Hi,
We have a situation in which we have to book depreciation for assets that were put into service since last year in the current year. The depreciation expense was accrued and reported when the year was closed out. However SAP wouldnt allow us to calculate the depreciation for anything before 01/01/2009. The assets were put into service in July of last year and hence we need to post 6 months of depreciation that we accrued last year in this posting period (when we will be capitalizing those assets). How do we go about doing this?
Here is what we tried:
1. Manual Depreciation: Doesnt work. The depreciation key we are using (LINA) doesnt allow manual depreciation
2. Changing the ordinary dep start date: You can change this date to last year but it wont calculate the depreciation from last year. It just starts the useful life from last year. The depreciation that is being caught up starts from 01/01/2009
3. Unplanned Depreciation: This is not an option because it goes to a different G/L account. The client wants it to be in the regular depreciation expense account only.
Any suggestions?
Thanks!
Hi,
So far my knowledge goes there is no way wherein you can capitalise assets in currnet year and account for dep from the previous year unless you go for post capitalisation vide ABNAN.Let me try to explain it by the following example.
FY: April to March
APC 10000/
Rate od dep 10%
Ord dep Start 01.10.08.
Asset capitalisation date 01.10.08 but posted in the system on, say 01.04.09.
Line items for ABNAN
70 Asset A/c 10000
75 Acc Dep 500(on 10000 @ 10% for 6 months)
50 Rev for post capitalisation 9500.
FB60 Line items.
31 Vendor Account 10000
40 Prior per dep 500
40 Rev from post capitalisation 9500.
I do hope you will be able to clear your confussion.
With best wishes
Monoj
Edited by: MONOJ SARKER on Aug 5, 2009 12:11 PM
Similar Messages
-
How to find last date of the current year
Hi
Please tell me is there any function module to find out the last date of the current year.Hi,
You can do that very simply like so.
code
report zrich_0001.
data: first type sy-datum.
data: last type sy-datum.
first = sy-datum.
first+4(4) = '0101'.
last = sy-datum.
last+4(4) = '1231'.
write:/ first, last.
[/code]
OR use function modules
1.use this function module HR_GB_TAX_YEAR_DATES
Pass these values
P08_TXYEAR = Year
P08_PAYROLL_AREA = '01'
2.use FM......... FIRST_AND_LAST_DAY_IN_YEAR_GET
DATA: first LIKE sy-datum,
last LIKE sy-datum.
CALL FUNCTION 'FIRST_AND_LAST_DAY_IN_YEAR_GET'
EXPORTING
i_gjahr = '2007'
i_periv = '24'
IMPORTING
e_first_day = first
e_last_day = last.
WRITE: / 'First Date', first, ' Last Date', last.
Regards,
Raj. -
Each year for the past 5 years I make a family calendar and send copies to all he family members around the globe. I hate that I have to recreate all the birthdays and special occasions from scratch, and re-drag all the photos onto these dates, in the lower half of the page of each month on the new calendar. How can I create a new calendar for the current year and port all of these photos/comments into the new calendar from last years calendar, to save having to redo all this work!! I am not talking about the upper half page of the photos only...I am referring to the calendar page of each month.
Thanks in advance.
ColinWelcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT -
Details of open invoices for the current year/ material price analysis
Hi,
I'm very new to SAP SD,MM modules. Can any one help me in the following of my requirements?
1. How to get the details of open invoices for the current year? Which table should I look into?
2. I have to create a report to display material price analysis. How should I do that?
3. How to develope a report to list out all the Open Sales Order with earliest ship date and requested ship date
4.How to create an interactive report for displaying plant status to know the status of a particular material
5. How to develope a report on Sales Order displaying Sales order Number, Sales order date, Material, PO Date and Customer requested date
Thanks in advance!!
Uma.
Message was edited by:
Uma RaviHi Ravi,
for 3, 4, 5 --> u can go through the code ...
REPORT ZEX2 MESSAGE-ID arc NO STANDARD PAGE HEADING.
Tables :kna1,vbak.
SELECT-OPTIONS : so_vkorg FOR vbak-vkorg OBLIGATORY,
so_vtweg FOR vbak-vtweg OBLIGATORY,
so_spart FOR vbak-spart,
so_kunnr FOR kna1-kunnr.
DATA : BEGIN OF sales_open OCCURS 0 ,
vbeln LIKE vbak-vbeln,
auart LIKE vbak-auart,
kunnr LIKE kna1-kunnr,
bstnk LIKE vbak-bstnk,
lfstk LIKE vbuk-lfstk,
fkstk LIKE vbuk-fkstk,
gbstk LIKE vbuk-gbstk,
END OF sales_open.
DATA : BEGIN OF itm_sales OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
matnr LIKE vbap-matnr,
kwmeng like vbap-kwmeng,
lfsta LIKE vbup-lfsta,
lfgsa LIKE vbup-lfgsa,
fksta LIKE vbup-fksta,
fksaa LIKE vbup-fksaa,
gbsta LIKE vbup-gbsta,
END OF itm_sales.
DATA : l_kunnr LIKE kna1-kunnr,
l_vkorg LIKE vbak-vkorg,
l_vtweg LIKE vbak-vtweg,
l_spart LIKE vbak-spart.
DATA: v_statusl(20) TYPE c,
v_statusb(20) TYPE c,
v_statusf(20) TYPE c,
v_statusg(20) TYPE c,
v_status(20) TYPE c,
v_field(1) TYPE c.
data : v_openqty like vbap-kwmeng.
**Selection Screen Validations.
AT SELECTION-SCREEN.
PERFORM validations.
*& Form Validations
* text
* --> p1 text
* <-- p2 text
FORM validations.
**Customer
IF NOT so_kunnr[] IS INITIAL.
SELECT SINGLE kunnr INTO l_kunnr
FROM kna1
WHERE kunnr IN so_kunnr.
IF sy-subrc NE 0.
MESSAGE e002 WITH text-005.
ENDIF.
ENDIF.
**Sales Organization
IF NOT so_vkorg[] IS INITIAL.
SELECT SINGLE vkorg INTO l_vkorg
FROM tvko
WHERE vkorg IN so_vkorg.
IF sy-subrc NE 0.
MESSAGE e003 WITH text-006.
ENDIF.
ENDIF.
**Distribution Channel
IF NOT so_vtweg[] IS INITIAL.
SELECT SINGLE vtweg INTO l_vtweg
FROM tvkov
WHERE vkorg IN so_vkorg
AND vtweg IN so_vtweg.
IF sy-subrc NE 0.
MESSAGE e004 WITH text-007.
ENDIF.
ENDIF.
**Division
IF NOT so_spart[] IS INITIAL.
SELECT SINGLE spart INTO l_spart
FROM tvta
WHERE vkorg IN so_vkorg
AND vtweg IN so_vtweg
AND spart IN so_spart.
IF sy-subrc NE 0.
MESSAGE e005 WITH text-008.
ENDIF.
ENDIF.
ENDFORM. " Validations
Top-of-page.
PERFORM sales_top_of_page.
Start-of-selection.
PERFORM sales_sel.
*& Form sales_sel
* text
* --> p1 text
* <-- p2 text
FORM sales_sel.
SELECT vbeln auart kunnr bstnk
lfstk fkstk gbstk
INTO TABLE sales_open
FROM vbakuk
WHERE vkorg IN so_vkorg
AND vtweg IN so_vtweg
AND spart IN so_spart
AND kunnr IN so_kunnr
AND gbstk NE 'C'.
LOOP AT sales_open.
WRITE:/4 sy-vline,
5 sales_open-vbeln HOTSPOT ON COLOR 2 INTENSIFIED OFF,
16 sy-vline,
17 sales_open-auart COLOR 2 INTENSIFIED OFF,
27 sy-vline,
28 sales_open-kunnr COLOR 2 INTENSIFIED OFF,
40 sy-vline,
41 sales_open-bstnk COLOR 2 INTENSIFIED OFF,
55 sy-vline,
56 sales_open-lfstk,
76 sy-vline,
77 sales_open-fkstk,
96 sy-vline,
97 sales_open-gbstk ,
117 sy-vline.
HIDE sales_open-vbeln .
ENDLOOP.
ENDFORM. " sales_sel
*& Form sales_top_of_page
* text
* --> p1 text
* <-- p2 text
FORM sales_top_of_page.
WRITE:/4 sy-uline(114),
50 'OPEN SALES ORDERS' COLOR 7 INTENSIFIED ON .
WRITE: /4 sy-vline,
5 'SalesOrder' COLOR 1 ,
16 sy-vline,
17 'OrderType' COLOR 1,
27 sy-vline,
28 'Customer' COLOR 1,
40 sy-vline,
41 'PoNumber' COLOR 1,
55 sy-vline,
56 'Delivery Status' COLOR 1,
76 sy-vline,
77 'Billing Status' COLOR 1,
96 sy-vline,
97 'Processing Status' COLOR 1,
117 sy-vline .
WRITE:/4 sy-uline(114).
ENDFORM. " sales_top_of_page
AT LINE-SELECTION.
SELECT a~vbeln
a~posnr
a~matnr
a~kwmeng
b~lfsta
b~lfgsa
b~fksta
b~fksaa
b~gbsta
INTO TABLE itm_sales
FROM vbap AS a JOIN vbup AS b
ON a~vbeln EQ b~vbeln
AND a~posnr EQ b~posnr
AND b~gbsta NE 'C'
WHERE a~vbeln EQ sales_open-vbeln.
IF NOT sales_open IS INITIAL.
LOOP AT itm_sales.
at end of vbeln .
sum.
v_openqty = itm_sales-kwmeng.
endat.
WRITE:/5 itm_sales-vbeln,
itm_sales-posnr,
itm_sales-matnr,
itm_sales-kwmeng,
itm_sales-lfsta,
itm_sales-lfgsa,
itm_sales-fksta,
itm_sales-fksaa,
itm_sales-gbsta.
ENDLOOP.
ENDIF.
skip 2.
write:/ 'open Quantity for the order is ', v_openqty .
for 1.
open invoices..
SELECT vbeln
fkart
kunag
gbstk
INTO TABLE it_billing_h
FROM vbrkuk
WHERE vkorg IN so_vkorg
AND vtweg IN so_vtweg
* AND spart IN so_spart
AND kunag IN so_kunnr
and year in p_year ---->"parameter for year..
AND gbstk NE 'C'. "----> open invoices
for 2..
2. refer TABLES mara, EINA ..
regards,
VIjay -
Help needed on balance sheet plan report for the current year
Hi BW gurus,
I have a problem with reporting.
I need to get Balance-Sheet Plan Reports for the Planned year and for the current year.
To get the report for the planned year its straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
But I have a problem with the current year report.
I have fiscal year and the company code as the variables.
The report should be like this.
If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
And the 0balance for the twelve fiscal periods should be as follows
From jan 2006 to june 2006(fiscal periods) it should have only the actuals
From july 2006 to dec 2006(fiscal periods) it should have only the plan
I have already built a query by having two restricted keyfigures on 0balance.
One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
Hope you people can visualize my report.
Please help me ASAP.
Any kind of help is appreciated.
My mail id is [email protected]
Thanks in advance
Regards
Sam MathewHi Sam,
Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
Thanks
Prasad -
Hello, I am running a Mac book pro soft. 10.5.8 version. Since June the current year I did not get any updates for the software or any kinds of the other application, in my opinion that's weird for such a company.
The problem that I have now is with the Iphone 5 which is not supported for the current Itunes and I can not download the Itunes 10.7 version. What I supposed to do in this case because I can not syncronize at all.
Please give me a hand as soon as possible.
Many thanksMac OS X 10.5.8 is years old, 3 major versions out-of-date and unsupported at this point. You will never get any further updates for 10.5.8, and more and more applications will stop supporting 10.5.8 as time goes on. As mende1 points out, you can buy Snow Leopard (Mac OS X 10.6), which will let you use your new iPhone with your computer, but you need to make sure your computer's hardware is supported. See the system requirements for Snow Leopard:
http://support.apple.com/kb/SP575
If your computer cannot run Snow Leopard, you will need to either buy a new computer or abandon any thoughts of syncing the iPhone with that computer.
Also, note that you'll get far better integration of your iPhone and your Mac if you're using Lion (Mac OS X 10.7) or Mountain Lion (Mac OS X 10.8), which are required to use iCloud. Of course, the requirements of those systems are even steeper than those of Snow Leopard:
http://support.apple.com/kb/HT4949
http://support.apple.com/kb/HT5444 -
How can we import Fixed asset of the current year ?
Hi ,
in 1272578 note , SAP Support explain that's it's not possible to create fixed asset of the current year( example = acquisition date = 2009-02-01 ) using import , but they gave no workaround .
does it mean that we have to manually create all assets of the current year ? or there is another way ( using DI-API for example ) ?
ThanksGood day
The fixed asset master data import functionality in SAP Business One is used to import assets of the previous year. If you are to force the importation of current year assets some of them might load but system will not be able to calculate planned depreciation for that year, which will give u problems when u try to run depreciation forcing u to post manual depreciation.
With manual depreciation will not look good on the Fixed Asset Master since it sort of duplicate depreciation ONLY on the Master your report will be fine.
Capturing Current year assets manually will be the safer road.
Thanks
Louis -
How to get the last day of the current open fiscal period?
hi folks,
I have to display the last date of the current open fiscal period in the selection screen. Its just a display only.
if there is any function module vailable for getting that period, kindly suggest me?
thanks in advance,
cheers,
Adi.hi,
CALL FUNCTION '/BEV3/CHPERIOD_DETERMINE'
EXPORTING
date = sy-datum
version = c_version
IMPORTING
period = l_period
year = l_fiscal_year
EXCEPTIONS
period_in_not_valid = 1
period_not_assigned = 2
version_undefined = 3
OTHERS = 4.
If not use GM_GET_FISCAL_YEAR
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
BUKRS = '1000' " Company Code
DATE = SY-DATUM " Date to find fiscal year for
IMPORTING
CURRM = w_currm " Current Fiscal Month
CURRY = w_curry " Current Fiscal Year
PREVM = w_prevm " Previous Fiscal Month
PREVY = w_prevy. " Previous Fiscal Year
Rgds
Anver -
No budget in the current year but the system is letting receipts go against
We have a re-accuring issue where there is no budget in the current year but the system is letting receipts go against the budget. We need to know how this happens and a resolution as to how we can get it to stop. We can't have purchases against projects that do not have a current year budget.
PO created and delivery date has been in the month of Dec07 and goods received / Invoicing in Feb08 we dont have budget for 2008 but when we check in 2007 we have current budget.
How can I stop Posting in the current year even if PO has been created in Previous year?Hai,
I also opinion same as Ashish.
Budget availability will come alive when you create a PO. If Budget is available in year 2007, it will allow you to raise a PO. When you do GR, No cost postings happen. If you use Valuated Project stock, Qnty and value will sit in Project stock. To my knowledge, Budget availability will not check , cost in stock.
Try and do the GI to project. See if it is throwing an error. Becoz when you do GI, actual costs gets posted. ( if you r using valuated project stock).
Please let us know your findings.
Thanks
Saikishore Ganga. -
BEx analyzer 7.0 Report for last 3 months and current month
I need to create a report for a key figure (net value) and character (material), 0calday
Output format:
column1 : net value - previous year
column2 : net value - current year
column3 : net value - current quarter (separate columns for 3 months)
column4 : net value - previous quarter (separate columns for 3 months)
column5 : net value - current month
column6 : net value - 1st of month to current date (separate columns for each day).
Please help.
Points will be assigned.
Thanks
Mary.Hi
U R infoprovider should have following time characterstics
0FISCAL YEAR, 0FISCAL MONTH/QTR
column1 : net value - previous year
On the basis of user input data derive the year and offset it by - 1 (VYEAR-1)and make a RKF for that .
column2 : net value - current year
On the basis of user input data derive the year(VYEAR) and
make a RKF for that .
column3 : net value - current quarter (separate columns for 3 months)
If QTR is there then derive the QTR on the basis of 0calday/else if month is there then determine month range like 1-3 = Q1 4-6 = Q2 and it will be done in user exit
column4 : net value - previous quarter (separate columns for 3 months)
On the same way as above u can determine the same
column5 : net value - current month
On the basis of 0calday determine CALMONTH and create a RKF for this
column6 : net value - 1st of month to current date (separate columns for each day).
Create a Exit variable type range on CALMONTH for this and
keep the range as 01-current month(which will be derivefrom 0calday)
Thanks,
Debasish -
Why I can only download 20 photos for last month from the photostream while I have more than 3GB photos kept in iCloud? My iPhone was stolen and the photos in it are very precious to me. Many thanks.
On a new device you can only download what is currently stored in "My Photo Stream" in iCloud. iCloud keeps up to the last 1000 photos, but only the photos, that have been added during the last month. Older photos may be removed, when the time is up. On other devices you may be seeing older photos as well in "My Photo Stream", that will depend on the available storage on those devices, and when the Photo Stream has been enabled on those devices, see: My Photo Stream FAQ - Apple Support
If you are seeing other photos in the Photo Stream on other devices, that you want to save, mail them to you from the other devices.
Have you tried to restore your iPhone from the last iCloud backup of the old phone? The backup will contain the photos in the Camera Roll, but not the photos in Photo Stream. iOS: Back up and restore your iOS device with iCloud or iTunes -
My iTunes Match automatically charged me for a second year when the first year finished. In spite of that, I have lost all of my playlists on my iPhone. How can I get them back?
Hi,
No need to post three times!
Is iTunes Match still turned on on your iPhone? If not, you need to turn it back on.
If it is still on, go to settings, music app and turn off match- sign out of iTunes Store. Reboot iPhone, sign back into iTunes and turn on match. Poem music app. Does this help?
jim -
Web-Outlook appointments which are one year before the current date are removed
Hi,
my Web-Outlook works fine with my iPHONE4s but the appointments which are one year befoer the current date are removed.
Is there an option to keep all appointments?
regards
AndreasFor the OST problem, delete the OST file and let Outlook create a new one. But your problem may be that Outlook connects to Exchange 2013 using Outlook Anywhere only--MAPI RPC is gone--and for that you need a valid certificate. So the self-signed
certificate is likely your main problem.
For a self-signed certificate to work, you must add it to every client as a trusted certificate. That is hard to do with mobile devices, which is why it's recommended to obtain a certificate from a trusted public certificate authority. You'd
probably find Go Daddy to be reasonably priced, and there are others.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How to get the current year??
Hi all,
How to get the current Year??Hi,
Current Year & month are available in table MARV.
I hope this helps,
Regards
Raju Chitale -
Adding a year to the current date field
Hello,
Can any one please help on how to add a year to the current date field.
e.g 7/19/2011 plus a year = 7/19/2012
Thanks,
Han DaoIf you had a field DateTimeField1 and wanted to display the following year in DateTimeField2, you could do the following in JavaScript;
var d1 = util.scand("yyyy-mm-dd", DateTimeField1.rawValue);
if (d1 !== null)
d1.setFullYear(d1.getFullYear()+1);
DateTimeField2.rawValue = util.printd("yyyy-mm-dd", d1);
Good luck
Bruce
Maybe you are looking for
-
How to store file content in BLOB field MySql database using java
Hi! i want to store the file content in a BLOB field in MySql database using java. Please help me out.......... thanx in advance... bye
-
Recently purchased about three movies on my iPod. At first they worked fine, then when I was synching my iPod my iTunes asked to upload them so I just clicked ok. They are now in my iTunes on my computer but they no longer work on my iPod. I am cert
-
Will i lose my double data 4 gig for price of 2 gig if i renew/upgrade plan and phone?
i currently have a plan expiring in a week and would like to purchase an upgrade 4g phone from amazon but i have double data, 4 gig for 2 gig 30$ on my plan and dont want to lose this special..... will i lose my 4 gig data for 30$ if i renew and upgr
-
Advanced Table Compression Create Table with LOBs
Hi, I need some help with the Advanced Table Compression when creating a table especially when they contain a LOB. Here are 3 examples: Exp#1 CREATE TABLE emp ( emp_id NUMBER, first_name VARCHAR2(128), last_name VARCHAR2(128) ) CO
-
After upgrading today to dhcpcd 5.2.12-4. I rebooted and when opening a terminal saw the hostname was the hostname provided by DNS not what is set in /etc/rc.conf and /etc/hosts for 127.0.0.1 as it had previously been. Any ideas? Last edited by tesjo