Posting HR Text for Infotype 2004
Hello Friends,
I am using RP-EXP-C1-TX to write text for Infotype 2004(Availability) and then updating it using below Routine:
IF sy-subrc = 0.
PERFORM prepare_update(sapfp50p) USING 'V'.
COMMIT WORK and WAIT UP TO 3 SECONDS.
ENDIF.
My issue is that the text is getting updated properly but it is quite intermittent, meaning it posts sometimes and sometimes not. When I run it in debugging mode and execute each statement in PREPARE_UPDATE, it updates the text properly. But when I run it all at once, it updates at its own mood. I assume there is no issue with the code as it creates text many a times.
I have given a WAIT of 3 seconds also after the PREPARE_UPDATE call which has already made it very slow. The fact that through PA61 everything gets updated pretty quickly, makes me worry even more.
Please let me know what should I do or if I am missing something somewhere. Or this can be a system/Database issue? I am afraid if I move this to Production assuming that it is a system issue and it does not work there either.
Any help would be appreciated and rewarded.
Thanks.
Resolved myself
Similar Messages
-
Post long text for document line item via FI-GL Inbound IDoc
Hi guru,
I am trying post extension ZFIDCP02 linked basic type FIDCCP02 and message type FIDCC2 IDoc in R/3 (4.6c) via IBM Websphere (Inbound IDoc),
I am use inbound function module IDOC_INPUT_FIDCC2 and activate exit 008 (EXIT_SAPLF050_008) and exit 002 (EXIT_SAPLF050_002),
In the extension ZFIDCP02 and under E1FISEG, I am add my segment ZITEXT include field TDSPRAS, TDID, TDOBJECT, TDLINE.
I am send ZFIDCP02 IDoc via IBM Websphere no error but all field TDSPRAS, TDID, TDOBJECT, TDLINE in my segment ZITEXT not post in FI-GL.
How can I post long text for document line item (ZITEXT) in FI-GL ?.
and I'm mean post ZITEXT to bank statement via IDOC.
Please throw light on this and may be I 'm want solution or example ABAP code for exit 002 (EXIT_SAPLF050_002).
Thanks in advance,
Akkapong Pirachai
CAT Telecom
Edited by: Akkapong Pirachai on Aug 20, 2008 7:40 AMClose question because long time for answer.
-
Maintain texts for Infotype 0019 via ABAP.
Hi,
The issue is related to maintaining texts for Infotype 0019. I have a program below. The main problem is I am facing is for some records it inserts text in Infotype (0019) but for some it does not. Can anyone suggest why so or a way to resolve this problem ???
REPORT ytbctest009.
TABLES: pernr, pcl1.
INFOTYPES: 0019.
DATA: key LIKE pskey.
DATA: BEGIN OF ptext OCCURS 200.
DATA: line(72).
DATA: END OF ptext.
SELECTION-SCREEN BEGIN OF BLOCK abc WITH FRAME TITLE text-001.
PARAMETERS: p_pernr LIKE pernr-pernr.
SELECTION-SCREEN END OF BLOCK abc.
ptext-line = 'TEST 1'.
APPEND ptext.
ptext-line = 'Test 2'.
APPEND ptext.
ptext-line = 'Test 3'.
APPEND ptext.
rp-read-infotype p_pernr 0019 0019 '18000101' '99991231'.
SORT p0019 DESCENDING.
READ TABLE p0019 INDEX 1.
p0019-itxex = 'X'.
MOVE-CORRESPONDING p0019 TO key .
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '0019'
number = p_pernr
validityend = p0019-endda
validitybegin = p0019-begda
record = p0019
operation = 'MOD'.
EXPORT ptext TO DATABASE pcl1(tx) ID key.
Thanks in advance.Hi Rajashree,
I hope , below code will solve the problem.
<b>Main Code</b>
FUNCTION zhr_mustus_update_it0019.
*"*"Local interface:
*" IMPORTING
*" VALUE(IM_PERNR) TYPE P0019-PERNR OPTIONAL
*" VALUE(IM_USRID) TYPE PA0105-USRID OPTIONAL
*" VALUE(IM_SUBTY) TYPE P0019-SUBTY
*" VALUE(IM_TERMN) TYPE P0019-TERMN OPTIONAL
*" VALUE(IM_MNDAT) TYPE P0019-MNDAT OPTIONAL
*" VALUE(IM_BVMRK) TYPE P0019-BVMRK OPTIONAL
*" VALUE(IM_TEXT) TYPE CHAR30 OPTIONAL
*" EXPORTING
*" VALUE(EX_RETURN_MESSAGE) TYPE STRING
*" VALUE(EX_MESSAGE_ID) TYPE ARBGB
*" VALUE(EX_MESSAGE_NUMBER) TYPE MSGNR
*" EXCEPTIONS
*" SYSTEM_FAILURE
*" COMMUNICATION_FAILURE
REFRESH bdcdata.
REFRESH it_bdc_message.
* Validations
PERFORM validations USING im_usrid im_subty im_mndat
CHANGING im_pernr
g_task_date
g_rem_date.
* Return message
MOVE:
g_message TO ex_return_message,
'ZMSGHR' TO ex_message_id,
g_msgno TO ex_message_number.
* If there any error don't process
CHECK ex_return_message IS INITIAL.
* If reminder date is missing then its creation
IF im_mndat IS INITIAL.
* Fill BDC for PA30 Creation
PERFORM fill_bdc_for_creation USING im_pernr
im_subty
im_text
g_task_date
g_rem_date.
ELSE.
* Its a change, Fill BDC for PA30 change
PERFORM fill_bdc_for_change USING im_pernr
im_subty
im_termn
im_bvmrk
im_text.
ENDIF.
* Call transaction PA30
PERFORM bdc_call_transaction.
* Return message
MOVE:
g_message TO ex_return_message,
g_msgid TO ex_message_id,
g_msgno TO ex_message_number.
ENDFUNCTION.
<b>All Above Subroutines,</b>
*& Form Validations
* Validations for MUS/TUS
* -->U_USRID User id for TUS
* -->U_SUBTY Subtype 10 - MUS, 11 - TUS
* -->U_MNDAT Reminder date
* <--PERNR Person for MUS
* <--U_TASK_DATE Task date
* <--U_REM_DATE Reminder date
FORM validations USING u_usrid LIKE pa0105-usrid
u_subty LIKE p0019-subty
u_mndat LIKE p0019-mndat
CHANGING u_pernr LIKE p0019-pernr
u_task_date LIKE sy-datum
u_rem_date LIKE sy-datum.
DATA:
BEGIN OF it_tmp_0019 OCCURS 0,
termn LIKE pa0019-termn,
END OF it_tmp_0019.
CLEAR g_message.
* Validations for MUS
IF u_subty EQ c_subty_10.
MOVE sy-datum TO u_task_date.
IF u_pernr IS INITIAL.
* Person number is missing
MOVE:
text-001 TO g_message,
'003' TO g_msgno.
ELSEIF u_mndat IS INITIAL.
* Its creation, check if there is already a open item
SELECT pernr
FROM pa0019
INTO u_pernr
WHERE pernr EQ u_pernr
AND subty EQ u_subty
AND bvmrk NE '2'.
EXIT.
ENDSELECT.
IF sy-subrc EQ 0.
* Throw an error if there is already a open item
MOVE:
text-006 TO g_message,
'004' TO g_msgno.
ENDIF.
ENDIF.
ENDIF.
* Validations for TUS
IF u_subty EQ c_subty_11.
IF u_usrid IS INITIAL
AND u_pernr IS INITIAL.
* User/Person number is missing
MOVE:
text-002 TO g_message,
'005' TO g_msgno.
ELSEIF NOT u_usrid IS INITIAL.
SELECT pernr
FROM pa0105
INTO u_pernr
WHERE usrid EQ u_usrid.
ENDSELECT.
IF u_pernr IS INITIAL.
* Person number is missing
MOVE:
text-001 TO g_message,
'006' TO g_msgno.
ENDIF.
ENDIF.
IF g_message IS INITIAL.
SELECT termn
FROM pa0019
INTO TABLE it_tmp_0019
WHERE pernr EQ u_pernr
AND subty EQ u_subty
AND bvmrk NE '2'.
READ TABLE it_tmp_0019 WITH KEY termn = sy-datum.
* There is no open task for today
IF sy-subrc NE 0.
MOVE sy-datum TO u_task_date.
ELSE.
* There is a open task for today, new task should be created next
* available date and reminder date is yesterday's date
SORT it_tmp_0019 DESCENDING.
READ TABLE it_tmp_0019 INDEX 1.
u_task_date = it_tmp_0019-termn + 1.
u_rem_date = sy-datum - 1.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. "VALIDATIONS
*& Form Fill_bdc_for_creation
* BDC data for creation , Transaction PA30
* -->U_PERNR Person
* -->U_SUBTY Subty MUS - 10, TUS - 11
* -->U_TEXT Text
* -->U_TASK_DATE Task date
* -->U_REM_DATE Task date
FORM fill_bdc_for_creation USING u_pernr LIKE p0019-pernr
u_subty LIKE p0019-subty
u_text TYPE char30
u_task_date LIKE sy-datum
u_rem_date LIKE sy-datum.
* Scree1
DATA:
l_task_date(10),
l_rem_date(10).
* Use system date as Task date
WRITE:
u_task_date TO l_task_date,
u_rem_date TO l_rem_date.
PERFORM bdc_dynpro USING 'SAPMP50A' '1000'.
PERFORM bdc_field USING 'RP50G-PERNR'
u_pernr.
PERFORM bdc_field USING 'RP50G-CHOIC'
'0019'.
PERFORM bdc_field USING 'RP50G-SUBTY'
u_subty.
PERFORM bdc_field USING 'BDC_OKCODE'
'=INS'.
* Screen2
PERFORM bdc_dynpro USING 'MP001900' '2000'.
PERFORM bdc_field USING 'P0019-TMART'
u_subty.
PERFORM bdc_field USING 'P0019-TERMN'
l_task_date.
IF NOT u_rem_date IS INITIAL.
PERFORM bdc_field USING 'P0019-MNDAT'
l_rem_date.
ENDIF.
PERFORM bdc_field USING 'RP50M-TEXT1'
u_text.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'MP001900' '2000'.
PERFORM bdc_field USING 'P0019-TMART'
u_subty.
PERFORM bdc_field USING 'P0019-TERMN'
l_task_date.
IF NOT u_rem_date IS INITIAL.
PERFORM bdc_field USING 'P0019-MNDAT'
l_rem_date.
ENDIF.
PERFORM bdc_field USING 'RP50M-TEXT1'
u_text.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPD'.
ENDFORM. "fill_bdc_for_creation
*& Form fill_bdc_for_change
* BDC data for change , Transaction PA30
* -->U_PERNR Person
* -->U_SUBTY subtype MUS - 10 , TUS - 11
* -->U_MNDAT Reminder date
* -->U_BVMRK Status
* -->U_TEXT Text
FORM fill_bdc_for_change USING u_pernr LIKE p0019-pernr
u_subty LIKE p0019-subty
u_termn LIKE p0019-termn
u_bvmrk LIKE p0019-bvmrk
u_text TYPE char30.
* Scree1
DATA l_termn_date(10).
WRITE u_termn TO l_termn_date.
PERFORM bdc_dynpro USING 'SAPMP50A' '1000'.
PERFORM bdc_field USING 'RP50G-PERNR'
u_pernr.
PERFORM bdc_field USING 'RP50G-CHOIC'
'0019'.
PERFORM bdc_field USING 'RP50G-SUBTY'
u_subty.
PERFORM bdc_field USING 'RP50G-BEGDA'
l_termn_date.
PERFORM bdc_field USING 'RP50G-ENDDA'
l_termn_date.
PERFORM bdc_field USING 'BDC_OKCODE'
'=MOD'.
* Screen2
PERFORM bdc_dynpro USING 'MP001900' '2000'.
PERFORM bdc_field USING 'P0019-TMART'
u_subty.
PERFORM bdc_field USING 'P0019-TERMN'
l_termn_date.
PERFORM bdc_field USING 'RP50M-TEXT1'
u_text.
PERFORM bdc_field USING 'P0019-BVMRK'
u_bvmrk.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPD'.
ENDFORM. "fill_bdc_for_change
FORM bdc_call_transaction.
DATA:
l_mode(1) TYPE c VALUE 'N',
l_lines TYPE i,
l_msgvar1 LIKE balm-msgv1,
l_msgvar2 LIKE balm-msgv2,
l_msgvar3 LIKE balm-msgv3,
l_msgvar4 LIKE balm-msgv4.
CALL TRANSACTION 'PA30' USING bdcdata MODE l_mode
MESSAGES INTO it_bdc_message.
* Get last message
DESCRIBE TABLE it_bdc_message LINES l_lines.
READ TABLE it_bdc_message INDEX l_lines.
MOVE:
it_bdc_message-msgid TO g_msgid,
it_bdc_message-msgnr TO g_msgno,
it_bdc_message-msgv1 TO l_msgvar1,
it_bdc_message-msgv2 TO l_msgvar2,
it_bdc_message-msgv3 TO l_msgvar3,
it_bdc_message-msgv4 TO l_msgvar4.
* Prepare message
CALL FUNCTION 'MESSAGE_PREPARE'
EXPORTING
language = sy-langu
msg_id = g_msgid
msg_no = g_msgno
msg_var1 = l_msgvar1
msg_var2 = l_msgvar2
msg_var3 = l_msgvar3
msg_var4 = l_msgvar4
IMPORTING
msg_text = g_message
EXCEPTIONS
function_not_completed = 1
message_not_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MOVE text-005 TO g_message.
ENDIF.
ENDFORM. "BDC_FIELD
* Start new screen *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
* Insert field *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_FIELD
Cheers.
Santosh. -
Maintain text for Infotype 0015
Hi,
I want to upload the text to infotype 0015 via Maintain Text.
Can any one help me how to upload the text using export or macros.
Thanks & Regards,
MohanHi Murali,
I haven't tried it.. but may be you can look at the logic in HR_READ_INFTY_NOTE & try to do the opposite.. ie something like
export ptext = text
to database pcl1(tx)
id key ignoring conversion errors.
You may have to read the infotype record first to get the key.. also remember to update the field ITXEX for eahc record.. otherwise, the text cannot be displayed via pa20/30..
~Suresh -
Maintaining / Displaying Text for Infotype record
Hi,
How do we maintain infotype text for the record. Or how to display the text maintained for infotype record (I used PA20/PA30 for IT0001 record but could not locate infotype text).
Regards,
Avinash Josalkar.Hi,
If you want to know the text of a infotype then goto the table
V_T582A.
eg:0000 actions
0001 organisation assignment.
But if you want to change the standard text of a infotype then you need to have access key to change.
But if you are asking the text table for the fields in 0001.
then goto se11
enter Pa0001--dislay
click the tab entry help/check then you can see the table names in the column check table for each field. -
Post-element text with computed value
I have a page item (P10_X) with post-element text referencing a application level item using &G_ITEM. notation. G_ITEM is computed on the page and the computation needs to take into account the value of P10_X so the firing point is "after footer".
This leads to a Catch-22 because the item and post-element text is rendered before the computation so the value of G_ITEM is not accurate.
Any ideas? ThanksNot sure I understand. Suppose P10_X=10 when it is rendered. G_ITEM is computed as :P10_X (i.e. 10) + (select ...). The post-element text for P10_X refers to &G_ITEM. so it uses the "stale" value of G_ITEM; the latest value is not computed until after all regions are rendered.
Edit: Turns out that P10_X obtains it value in an Before Header application process, not via its Source attribute. So I can put the computation for G_ITEM at the After Header point and so everything gets computed and rendered properly.
Edited by: Vikas2 on Jul 14, 2009 4:05 PM -
Export Text into Infotype text cluster
Hi,
I am trying to insert some text into the infotype text (Edit -> Maintain Text) for infotype 40 programmatically.
I have written the sample code below but the text is not inserted into the infotype. Can someone advise me what could be wrong with the code ?
Many thanks in advance.
Regards
KC
=============================================
REPORT ZTEXTO .
TABLES : PERNR, PCL1, pcl2.
INFOTYPES : 0040.
INCLUDE RPPPXD00.
DATA : BEGIN OF COMMON PART BUFFER.
INCLUDE RPPPXD10.
DATA : END OF COMMON PART BUFFER.
INCLUDE RPC1TX00.
GET PERNR.
LOOP AT P0040.
MOVE-CORRESPONDING P0040 TO TX-KEY.
REFRESH PTEXT.
PTEXT-LINE = 'THIS IS A TRAIL INSERT INSERT INTO INFOTYPE TEXT'.
APPEND PTEXT.
RP-EXP-C1-TX.
ENDLOOP.
PERFORM PREPARE_UPDATE USING 'V'.
BUFFER ADMINISTRATION ROUTINE.
INCLUDE RPPPXM00.Hi,
I have this same issue. I have the infotype field ITEXT is set to 'X'. I am trying to update the record in infotype 0672. I am using the following code, it executes well. But it is not updating the infotype with the text.
REPORT zven_insert_text_infotpe .
TABLES : pernr, pcl1, pcl2.
INFOTYPES : 0672.
Data: gs_0672 TYPE STANDARD TABLE of pskey with header line.
INCLUDE rpppxd00.
DATA : BEGIN OF COMMON PART buffer.
INCLUDE rpppxd10.
DATA : END OF COMMON PART buffer.
INCLUDE rpc1tx00.
gs_0672-pernr = '00010053'.
gs_0672-infty = '0672'.
gs_0672-subty = '0001'.
gs_0672-endda = '04042005'.
gs_0672-begda = '04042005'.
append gs_0672.
clear gs_0672.
*GET pernr.
LOOP AT gs_0672.
MOVE-CORRESPONDING gs_0672 TO tx-key.
REFRESH ptext.
ptext-line = 'THIS IS A TRAIL INSERT INSERT INTO INFOTYPE TEXT'.
APPEND ptext.
rp-exp-c1-tx.
ENDLOOP.
perform prepare_update using 'V'.
include RPPPXM00.
Please let me know ASAP.
Appreciate.
Thanks.
vgoy -
Conditional display of post element text.
Hello,
I wanted to know if it was possible to display the
post element text for a text item conditionally.
Thanks,
shilpa.Hi Shilpa
I am not aware of any functionality to conditionally display the post element text on its own. However there are 2 ways around this.
1) If when entering the page you want to decide if you should display the text you could, after each item add a display only item and put a condition on that. Changing the display only items displayed properties to Begin On New Line = NO and Field = NO will give the impression of post element text
2) If you want to conditionally display the text dependent on what the user has entered into the box you could use some javascript in the post element text field. e.g.
<span id="me"></span>
<script language="javascript">
function test1(){
if (1 + 1 == 2){
document.getElementById("me").innerHTML = "sometext";
</script>
then in the html form element attributes field you can call this function like this:
onblur="test1()"
Hope that helps
Adam -
HOw to find the text for PERSK field in infotype 0001
hi all
HOw to find the text for PERSK field in infotype 0001Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan -
Maintain text for all infotype
Hello,
Is someone knows why in some infotype the option "maintain text" is active and for others it isn't.
Can i active it for all infotype?
Thanks.
Edited by: marc frenay on Aug 20, 2009 12:43 PMHi,
You can change any standard Infotype text as per your requirment.Go the table view V_T582S & change the text for any infotype as per your requirement.
Snita -
Hi,
can anyone provide me with some function modules for retrieving all the texts of infotype 0001? For example, the text of field KOSTL.
I don't want to read directly from database tables.
Thanks.
/ElvezHi elvez,
1. I don't think there is any general FM
which will provide the TEXTS for the
corresponding CODES which are stored in 0001 for eg.
2. We have to know the TEXT table for that field,
and specifically look for it into that table.
3. eg. of other fields, where for the DESCRIPTION,
we have to look for the correspondgin tables only.
fields
BUKRS
WERKS
PERSG
PERSK
their tables
T001
T500P
T501
T503K
regards,
amit m. -
I'm not sure when it first started occurring, however, I recently noticed that ANY time I have tried lately to post a text reply to ANY video on YouTube, Firefox will open an "about:blank" screen for about 1-2 seconds, and close it. I will not get to make my reply and everything seemingly goes back to normal.
If I open the same video URL in I.E. 11.0, I have no difficulty whatsoever posting text replies to ANY videos, so something is going on with Firefox.
The thought had crossed my mind to uninstall/reinstall Firefox, and I know there's no harm in doing so, but I figured I'd come here first, in case someone who knows Firefox better than I, has an even simpler solution, or in case the uninstall/reinstall idea wouldn't have worked anyway. Please let me know what y'all think about this.Hello,
Please try using our Reset feature.
The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
To Refresh Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
#Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you. -
Having custom text for 'Actual' and 'Target' in Funne chart
Hi,
We see 'Actual' and 'Target' label values in funnel chart when we hover the mouse on the chart.
But i need to change the text to custom text for SINGLE graph. I dont want to chnage any xml or config files, I need this change in single report only.
Appreciate all your posts which helps.
Regards
MuRam
Edited by: MuRam on Dec 31, 2012 7:36 PMhttp://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
-
Change the SWF loading text for a single presentation
This question was posted in response to the following article: http://help.adobe.com/en_US/Presenter/7.0/WS8815BC0A-5D22-4f29-87B9-D9047B5B57E4.html
Hi,
I have Adobe Presenter 7.0.5, in which with recently updating to 7.0.7 version.
When I tried the fix of this "Change the SWF loading text for a single presentation" workaround fix, I passed to have the error:ReferenceError: Error #1069: Property ADOBE_PRESENTER not found on Pool_P75.Resource.UIText
But before this error comes, I see that the loading text is changes from the original 2Adobe Presenter" to the one defined by me on the UIText, as the fix said.
And what's happen is that the scrren with the loading text is not being changed by the learning first slide....
Is there any workaround to correct that error?
Many thanks in advance for any feedback from the adobe support team or from any other colleagues that are using Adobe Presenter (;-)). -
Disable Delete Button for infotype 2001 subtype 0025
I want to Disable Delete Button for infotype 2001 subtype 0025 only in PA30/61.
Is there any EXIT availableHi
Try it .
Somebody already given this type of answers.
Pls first use Search then post.
Well FYI,
<b>There is a standard User Exit for PA30 / 40 for PBO and PAI events.
ZXPADU01 for PBO and
ZXPADU02 for PAI events.
By writing proper code in here for the IT2001, you can write your rules.
PBAS0001 ( PA: Pers.Admin./Recruitment: Default values and checks ),</b>
Manoj Shakya.
Maybe you are looking for
-
How to Install Windows 8.1 Pro with Bootcamp
I have an early 2011 MBP 15" that's running Mavericks, and I just got Windows 8.1 Pro with an install disc. I'd like to install W8 with Bootcamp, but I can't seem to find any guides on doing this, as most people have retina MBPs which have no optical
-
Dear all, I want to use Labview to configure and read from a Wacom Intuos2 digitizing tablet. Can anyone help me with examples or pointers to accessing the functions in Wintab32.dll? Thanks Deb [email protected]
-
Orders which are PGIed in APO system
Hi APO experts, Could you please tell me which table provides me the information of the orders which are PGIed in APO? I know that there is a table called /SAPAPO/OBREF which gives you the delivered quantity as soon as you create a delivery. But, I w
-
Best Practice for Showing Videos in a Windows Application
I am building a windows 8 application that has multiple articles. Each article will have anywhere from 0-3 videos associated with it. I was wondering where I could find some guidelines, best practices or examples about the how best to do this from
-
ITunes 8.2.1.6 will not play most of the songs in my library
Since downloading iTunes 8.2.1.6 most of the songs in my library will not play on my computer. I am afraid to update my iPod for that reason. It is not album specific or iTunes purchased/cd ripped/ or internet downloaded specific either. Has affected