Postscript printer driver files not working.

When I download the postscript printer driver file to my mac I get a .sea file. The installation instructions say to copy the "PDFPlugIn file and the Acrobat Distiller (PPD) file" into the extensions folder. But I cannot get the .sea file to do anything. Stuffit expander won't expand them and the .sea file in the extensions folder doesn't seem to do any good.

I think we should try to get a different PPD than that one.
http://helpx.adobe.com/x-productkb/multi/save-as-pdf-options-not.html#main_InstallAcroPPD
You can download the Acrobat 9 PPD for use with InDesign/Illustrator to help with your Postscript file output.
You can substitute the InDesign file path with the Illustrator one to duplicate the steps.
In the end though, I honestly had to select "Other" in the PPD selection and direct to it manually.
This way it's just a pure PPD, not a SEA file.

Similar Messages

Canon MP620 print driver does not work with Snow Leopard

Bought a Macbook & bundled Canon MP620 printer in Dec 08. Two days ago upgraded to Snow Leopard, and I can no longer print (the printer is not recognized), it only sees "Bonjour scanner" (the printer is a multi-function printer, copier, fax, scanner). Spent more than two hours with two different Apple tech support people over the phone; talked to Apple personnel in store. My printer is connected via Ethernet cable to a wireless modem, and I connect to the wireless modem via Airport. The phone tech person insisted that this printer is supported by Snow Leopard, but we reloaded the print driver from the Snow Leopard installation disk with no results. Finally my last resort, which worked, is to go to Radio Shack and get a cable that has a USB-A (printer) to USB-B (Mac) attachment. I was able to print. It is unacceptable for Apple to have this problem, as I went into the store four different times to discuss whether I should upgrade to Snow Leopard, and was told on every occasion that Snow Leopard will make everything run faster, more smoothy, etc. NOT! I want Apple to post a notice on their web site to a) confirm their print driver problems with Snow Leopard and b) to confirm WHEN new print drivers will be released.

Have a look at my last posting re Canon network printing.
http://discussions.apple.com/thread.jspa?threadID=2128186&tstart=0&messageID=100 97438#10097438
i got my MP980 working via Ethernet and wireless. The same procedure should work for your MP620.
Pahu

Hp 2727nf printer driver does not work in osx 10.7, hp 2727nf printer driver does not work in osx 10.7

hp laserjet 2727 nf driver in osx lion does not work, It crashes the application and sends an error message?

Hey , Welcome to the HP forums! I hope you enjoy your stay here. I see that you are having some issues with adjusting the power save mode settings on your Laserjet P1606dn. I can help with that. First make sure the printer is plugged directly into a wall outlet and not a surge protector. If the printer is connected with an ethernet cable to a router then you may be able to do this instead:On the printer hold down the button that looks like a sheet of paper with an arrow on it for about ten seconds. This should print out a report.On your Mac open a browser and enter the printer's IP Address in your Address bar exactly as it appears on the page. When you are finished click on enter/return.This will open the printer's Embedded Web Server. In here you may be able to find some options to adjust the power save settings.If the above does not work then this troubleshooting may assist you with the utility:Go to Applications, and if you have it open the Hewlett-Packard folder.Run HP Uninstaller to remove any existing software from you system.On the Mac go to the Apple icon and Sytem Preferences.Open Printers and Scanners.Hold down the Command key and click on the picture of your printer on the left.Click on Reset Printing System.Go to Applications and Utilities.Open Disk Utility.Click on Macintosh HD on the left.Click on Verify Disk Permissions. This should take about ten minutes.Click on Repair Disk Permissions. This should take about ten minutes.Restart your Mac.Plug in the USB cable between the printer and the router.Check for Product Updates on your Mac.Try running the tool again.If this resolves everything please let others know by clicking on Accept as Solution below my post.
I hope this helps and I hope you have a great day!

My finger print reader is not working and this unknown driver is not installing HP4230s

my finger print reader is not working and i have tried the downloads available on hp website and many other but its not showing in the area where we configure the passwords for the pc
and my other problem is as i have updated my pc to win 8 or 8.1 this device is not getting installed the hardware id is : ACPI\VEN_HPQ&DEV_0004
kindly solve these problems as i really want to use this finger print and i dont know what is this unknown device all about

my hp envy mp notebook fingerprint is not working, give the software for it !

Print Spooler does not work after Win 8.1 install

I upgraded several computers to Win 8.1. Most are operating normally and do not have this problem. This is relevant to show that it is not a printer hardware or compatibility problem. On one computer, the print function is not working.
I've tried reinstalling printers, getting new drivers, etc. It comes down to this. An active (connected) printer is selected and print test page is selected. The dialog box says that the print queue is full. I went to the queue subdirectory
and deleted all files, no change to the results. The Print spooler is active in task manager. Stopping and restarting the print spooler makes no difference. Any ideas?

I had similar problems with HP Printers on the LAN (after upgrade from Windows 8 tot 8.1
32bit)
HP Laserjet 4000 Laserjet 4050 and Laserjet 4250 - all with Network interface.
Erratic behaviour: inserting blank pages, no duplex printing, programs stalling when printing etc…
Printers and network are fully functional and work perfectly with W7 and XP. Not with Windows 8.1.
Strange thing: Epson Aculaser and Ricoh Aficio 3224 worked fine but those were installed after the Windows update.
So definitely something with the Microsoft drivers for the HP Laserjet printers.
After a few installs and uninstalls of the HP printer drivers the problems stayed.
Then I removed all HP related driver files (C:\\Windows\\system32\\spool\\PRINTERS")
and all references in the Register because the standard uninstall of the drivers did not remove all files.
-> First uninstall ALL HP printers (laserjet, deskjet, officejet etc ..)
-> Then look in
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Print Processors]
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers]
Make a backup of the registry keys and then remove all files starting with hp….
Remove the print processors starting with hp
(i.e. hpzpplhn.exe)
Then restart your system.
Reinstall the printers, they should be OK now.
If you still have duplex printing problems : replace the hpzpplhm print processor with the winprint processor. (may give other limitations, google for more info).
In my case this solved the erratic printing problems.

Print queue does not work

Since the update I did from Tiger to Leopard the Print Queue does not work. When I print a document the printer starts to jump up and down on the Dock for more than 5 minutes. Printing finishes and the icon of the printer is still "dancing" on the Dock. If I try to open Print Queue the window does not open immediately but after a long time and I can't see the printing documents that are waiting in the queue. As a result I can't stop or pause or delete a printing document. The same thing happens if I try to open Print Queue from the Print & Fax Preferences' window. The window opens after a long delay and nothing can't be controlled from this window. I forgot to say that the printer icon remains on the Dock and Force Quit is the only option I have when trying to quit it.
I have tried Permissions Repair. Nothing happened. I installed the latest driver. The problem is still there. Only after Reseting Printing System the problem is fixed but until the first reboot. If I restart the computer then the problem appears again and the only thing I can do is to Reset again the Printing System. So, if I want to control the printing procedure, I have to Reset Printing System after every restart!!! Any help???
P.S. I have a Canon iP4500 but I don't think that the printer is the problem because with Tiger I had never face this problem and I have also printed with this printer from a MacBook running Leopard with no problems.

1) I tried Print Therapy and after I had repaired Permissions the problem was solved (some permission problems were found) until the next restart.
2) Then I tried to stop and start again the cupsd process and again the problem was solved until the next restart of the computer.
3) Then I replaced the cupsd.conf file with a new one but the app asked to restart the computer and after this the problem was back.
4) Print Therapy does not find any problems neither in the properties of the root user nor in the current user or any other group.
5) Also the verification of the temporary files find no problems.
In conclusion I think that the problem lies in the cupsd process because when stopped and restarted (we can forget that by Repairing Permissions actually we restart cupsd) I have no problem until the next restart of the computer.

External Drive Files Not Showing Up on Mac but files do shows Up on PC

External Drive Files Not Showing Up on Mac but files do shows Up on PC
i had the Ex HD for about 3 years running smoothly on my mac but recently everything disappeared. plunged it into a pc to see if it read my files and it did. what can i do? to make it work on mac again. i don't want to reformat that drive because i have important applications (DMG) and other zip photo video files in the drive.

yes. i did.
...i have tried "verify" & "repair" but they didn't pass the san test. and when i "unmounted/mount" a error message popped up say that there is a application running off the drive but there nothing (i see) running, to close all activity

Printer driver was not installed. operation could not be completed

Adobe Acrobat 9.3.1
windows XP system.
Cannot add the Adobe PDF printer get the error message:
Printer driver was not installed. operation could not be completed
Software installs/repair try to install the Adobe PDF printer but they do not. No error message; just that the Adobe PDF printer does not show up
I tried adding the Adobe PDF printer manually.
The drivers start to load and then fails giving the error message in the subject line.
I cleared the print spoolers and rebooted.
I have uninstalled Adobe Acrobat /rebooted/reinstalled. Install says it adds the Adobe PDF printer but nothing happens.
Problem exists for all users including Administrators.
I have renamed the C:\WINDOWS\system32\spool\drivers\w32x86 and C:\WINDOWS\system32\spool\drivers\Printers folder.
Both are recreated when I try to reinstall the Adobe PDF Printer.
I can add network printers with no errors.
I have cleared Adobe PDF printer from registry. e.g.:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3\Adobe PDF Converter
I even imported Adobe PDF registry entry from a working system taking care to adjust the system values accordingly.
I also verified permissions for registry keys and application/driver folders were set correctly.
I have completely reloaded the installation software and imported the Adobe PDF drivers from a working system.
Not sure if this an Adobe issue, but that appears to be the only printer I cannot re-add.
Any constructive ideas on what to try next would be appreciated.

When I upgraded to Reader 9.4 I lost all ability to print Adobe pdf's. Finally uninstalled 9.4, re-installed 8.2, changed the filename "high quality.joboptions" to "Adobe PDF converter.joboptions" and was back in business. Pretty screwey fix, but after getting no help from online chats with Adobe and a day's lost work I was happy to have it.
[email protected]

Satellite P25-S520 - DVD drive is not working properly

Fix DVD Drive or buy external drive
My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
An attempt at updating the driver was also unsuccessful.
I was able to rip a music CD last night so that at least is working correctly.
Does anybody know how I can fix this? The important part is being able to load my new program.
Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
Thank you for any help,
Humbaba3000BC
Satellite P25-S520
PIONEER DVD-RW DVR-K12D
Driver Provider: Microsoft
Driver Date: 7/1/2001
Driver Version: 5.1.2535.0
Digital Signer: Microsoft Windows Publisher

Any external USB CD/DVD drive will be compatible with your laptop.
However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

External Hard Drive does not work with Lion

Hi
My External Hard Drive does not work with Lion this message appears:
NTFS-3G could not mount /dev/disk1s1
at /Volumes/My Passport because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)
can anyone help?

Hi,
See this Discussion:
https://discussions.apple.com/thread/3191198?start=0&tstart=0
Cheers,

Backing up to new external hard drive is not working

I just purchased a new 2TB FreeAgent external hard drive. I hooked it up to use as a time machine backup and in the preferences of Time Machine it said that the drive needed to be formatted. I then went to Disk Utility and erased the drive using the format "Mac OS Extended (Journaled)" and gave it a name. Once that was done I attempted to back up again through time machine but it started the "calculating changes..." at 23% and stayed there all night. I do not know if I need to reformat it differently or why it is not working.... any suggestions?

jwsand wrote:
I tried to hook up the external hard drive to a different computer (imac) and it worked without any problem.
Did you cancel the backup it was attempting to do, before disconnecting it? If not, did you eject it first?
Do you mean it ran backups? Or just that it was recognized? Those are very different.
The mac pro has 2 internal hard drives. One for the OS and the other for a tm backup.
Be sure that second drive is now excluded from TM Backups via TM Preferences > Options. If TM is trying to back up the internal disk's TM backups onto the new external, that might explain why it's confused (I know I am!)
I attempted to hook up this external drive to a second external tm back up
Do you mean you've "daisy chained" it, to yet another disk also containing TM backups?
and noted the different disk in the tm preferences.
Do the two disks have different names, and does TM Preferences show the new name? If not, the preferences file may be corrupt. In that case, do a "full reset" per #A4 in the Troubleshooting Tip.
Do you have any idea why this drive would not work on my mac pro but does work on my imac?
I'm not entirely sure that's true. Please clarify exactly what you're doing; what's connected where and how, and what's being backed-up.
On the Pro, you have 2 internals and how many externals? Which ones are being backed-up (ie, not on the exclusion list in TM Preferences > Options)?

I have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder.

i have a macbook pro from 2006, my internal cd drive is not working and i'm trying to install factory definitions from an external cd drive. the problem is that when i press c nothing happens only appears an interrogation folder. or sometimes appears the apple logo and than back again to the interrogation folder... Help please!!!!

mcbsousa wrote:
hm... Is there any chance of making the bootable usb file and send it by dropbox or something like that? than put it in a pen drive and connect to the mac??
Sending by Dropbox where, To who, to what computer? As your does not start up.
You need to take at least the OS disc to a work Mac computer and create DMG from the OS install disc then restore that DMG to USB thumb drive. Then you can boot the computer from that thumb drive and install the OS. That is if your hard drive is functioning correctly.
Then you can use the App disc in the external CD/DVD drive to load up all the included Applications that come with your version of OS X.

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Adobe Pdf Converter Print Driver Will not install

Acrobat V9.0
Vista Utimate Service Pack 1
I have not been able to print to the PDF Printer. I get the following error when I select the PDF printer.
"The 'Adobe PDF Converter' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
When I say yes and select version 8.5.0.0 printer since it is the latest version. I get a Add Printer Driver Wizard window that says. "Unable to install adobe pdf converter, Type 3 - User Mode, x86 driver. Access is denied.
I went through all the recommended steps on the web site listed below with no success.
Thanks in advance for you help.!!!!!!!!!!!!!!
Jim
Solution 1: Use a supported installation.
The following are unsupported installations, and the supported solutions:
If you install Acrobat (Professional or Standard) on a 64-bit operating system, then you may
see this error. Please update Acrobat to version 8.1 or later. You can update from within
Acrobat via the help pull-down menu, or download the updater from the following location:
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.
If you install Acrobat to a shared network disk instead of a local hard disk, then the Adobe PDF
printer is not installed. Install Acrobat on a local hard disk.
TechNote Details
PRODUCTS AFFECTED:
DID THIS RESOLVE
YOUR PROBLEM?
Yes
No
300 characters
Acrobat Professional
Acrobat Standard
Acrobat 3D
TechNote
Home / Support /
Your account o Y Contact United States (Change)
Home Solutions Products Support Communities
Company Downloads Store
Error "Warning 20225..." or no Adobe PDF printer appears (Acrobat 8.0 and Acrobat 3D 8.0 on Windows)
http://kb.adobe.com/selfservice/viewContent.do?externalId=333221&sliceId=1[10/4/2008 2:04:17 PM]
If you install Acrobat to a directory with a path that contains extended ASCII or double-byte
characters, then English installations will display the error message. Install to a path that does
not contain extended ASCII or double-byte characters.
Solution 2: Ensure that the Print Spooler process is running and set to
Automatic, and then repair Acrobat.
1. Select Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Locate the service Print Spooler.
4. If the Startup Type is not Automatic, then set it to Automatic:
a. Right-click the Print Spooler.
b. Choose Properties.
c. Choose the General tab.
d. Choose Automatic in the Startup Type menu.
e. Click OK.
5. If the Print Spooler service is not running, then start it.
a. Right-click the Print Spooler line.
b. Select Start from the menu.
6. Start Acrobat, and choose Help > Detect And Repair.
Solution 3: Ensure that the Print Spooler process has no additional
dependencies.
Only the Remote Procedure Call dependency is required for Print Spooler to operate.
Additional Services can attach to the process but will interfere with restarting the service.
If the Print Spooler process has additional dependencies, then please refer to the steps
below.
To remove all services listed under "This service depends on the following system
components":
1. Choose Start > Settings > Control Panel.
2. Double-click Administrative Tools and then double-click Services.
3. Right-click Print Spooler and choose Properties.
4. Click the Dependencies tab.
5. Record services under "This service depends on the following system components" and click
OK.
Imporatnt: Remote Procedure Call is a system service and should not be removed.
6. Temporarily remove associated programs for the listed services.
7. Contact the service vendor for removal information if removal of associated software does
not remove the service.
8. Start Acrobat, and choose Help > Detect And Repair.
To disable all services listed under "The following system components depend on this
service":
1. Choose Start > Set

I am having similar problems. After years of successful use, about a year ago, my printer (Epson stylus Photo R300) stopped working. After much investigation, it appears my computer no longer recognizes my printer. I've followed resets, safe boots, uninstalls, reinstalls, etc. This happened so long ago, I don't recall what I was doing when it happened. I'm figuring it happened shortly after a Software Update... So far none of the fixes recommended to me have solved the problem. I've been using Epson customer support, but they've stopped responding. None of their suggestions have seemed to work either.

HT3500 Printer driver just stops working

Printer driver just stopped working. HP Photosmart c410 wifi, connected to Mini OS 10.8 and Airport. Sez "Printer is not connected" but it is. Doesn't work from other Macs on the network either.
It has worked fine up until just now. Tried printer OFF then ON. Tried to re-install driver, but I can't seem to do this. The correct driver cannot be selected.

hi
i have the same problem with the centro
did you found a solution?
farmer
Post relates to: Centro (Unlocked GSM)

Postscript printer driver files not working.

Similar Messages

Maybe you are looking for