Pourquoi apres avoir installé mac OS X mountain lion tout logiciels installé par internet ne s'ouvre pas ( skype , vlc ... )

Pourquoi apres avoir installé mac OS X mountain lion tout logiciels installé par internet ne s'ouvre pas ( skype , vlc ... ) merci a vous

What happens when you try to open those applications?
Google Traduction

Similar Messages

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

My brand new Mac Pro running Mountain Lion crashes when installing updates or new software.

My brand new Mac Pro running Mountain Lion crashes and re-boots when installing updates or new software. I can only perform these operations while in the safe boot mode. I have reloaded OSX twice. Does not solve the problem. The machine is brand new. It replaced a previous MacPro that would not support the new Mountain Lion. When my new machine came in. I swaped the dirve out of my old unit into the new and ran the new Lion update. The machine has had this aforementioned problem since that time. Also, I had the Legacy version of File Vault running on the old machine/drive, which I also turned off(thinking that was the problem) but that did not fix the problem either.

Here is my panic log entry:
Sun Nov 18 22:08:42 2012
panic(cpu 6 caller 0xffffff800b4ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 6), Frame : Return Address
0xffffff8556cab950 : 0xffffff800b41d626
0xffffff8556cab9c0 : 0xffffff800b4ac90b
0xffffff8556cab9e0 : 0xffffff800b51c09c
0xffffff8556cabc10 : 0xffffff800b510e92
0xffffff8556cabc40 : 0xffffff800b4ff375
0xffffff8556cabf50 : 0xffffff800b7e182a
0xffffff8556cabfb0 : 0xffffff800b4ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000b200000
Kernel text base: 0xffffff800b400000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 427147359117
last loaded kext at 111975561856: com.apple.filesystems.smbfs          1.8 (addr 0xffffff7f8ba85000, size 229376)
last unloaded kext at 127467947009: com.apple.driver.AppleIntel8254XEthernet          3.1.1b1 (addr 0xffffff7f8bf8d000, size 69632)
loaded kexts:
com.zeobit.kext.Firewall          2.3.1
com.apple.filesystems.smbfs          1.8
com.apple.driver.AppleIntelProfile          97
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleHDA          2.3.1f2
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.driver.AppleUSBHub          5.2.5
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.Intel82574L          2.3.0b4
com.apple.BootCache          34
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBUHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleProfileTimestampAction          97
com.apple.driver.AppleProfileThreadInfoAction          97
com.apple.driver.AppleProfileRegisterStateAction          97
com.apple.driver.AppleProfileReadCounterAction          97
com.apple.driver.AppleProfileKEventAction          97
com.apple.driver.AppleProfileCallstackAction          97
com.apple.iokit.AppleProfileFamily          97
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.driver.AppleUSBAudio          2.9.0f6
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.kext.AMD5000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleUSBHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Can't Install Mac OS X Mountain Lion

I've recently purchased Mountain Lion from apple. I recieved a code for the App Store to download it, and did so. However, when I tried to install it, it asked me to put in my password. I did this, and it was correct, but nothing happened. I was just on the same screen as before. I clicked install and it asked for the password again. I typed it in. The pop up left. I clicked install. Then the whole thing happened again! Help?

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Installing Mac OS X Mountain Lion on VMware Workstation - V10

Hi, I am having graphic problems on my Windows 8.1 PC. I would like to install a Mac OS X on VMware Workstation V10. I have the following screenshots attached on this thread. I have tried everything on the VMware Workstation, but it wont solve the problem - there might be some downloading to do...
Please reply back to me if you want to know my PC stats on this PC.
Here are the pictures of the error.
Error #1
Error #2

You may not run OS X on anything but Apple hardware. It is a violation of the licensing terms.

How do I install gimp on my mac with OSX Mountain lion? It says it cant find X11.

How do I install gimp on my mac with OSX Mountain lion? It says it cant find X11.

Have a look in your Utilities folder - X11 should be there. Launch it and you'll be offered the option to install.

Unable to Install Flash on Mac OS X Mountain Lion

I have attempted several times to install Flash Player (11.7.700.225) on Mac OS X Mountain Lion (10.8.4), and every time I attempt to install it hangs on 20% during installation. I have ensured that there is no flash player installed on the Mac currently, and I have also deleted the original Flash download and re-downloaded a couple of times. I also attempted the troubleshooting solution (#7) found here http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#main-pa rs_header_0. However, this leads me nowhere because as you can see, my resources folder doesn't contain a .pkg file, nor do any of the other folders in the Contents folder (at least from what I can see). Do you have any other solutions for this problem? Cheers.

Try this installer http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

If you've installed the Mac OS X Mountain Lion and want to restore your MacBook to factory settings, what do you do?

Havinig a lot of problems with my MacBook since I've upgraded to the Mac OS X Mountain Lion program. Can someone tell me if it's possible to reset my computer back to factory settings?

Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
       A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
       B. Clone to an external drive using using Carbon Copy Cloner.
          1. Open Carbon Copy Cloner.
          2. Select the Source volume from the Select a source drop down menu on the left side.
          3. Select the Destination volume from the Select a destination drop down menu on the right
              side.
          4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
              sure to opt for that.
               Destination means a freshly erased external backup drive. Source means the internal
               startup drive.
Step Two - Prepare the machine for the new buyer:
          1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
          2, Remove any Open Firmware passwords or Firmware passwords.
          3. Turn the brightness full up and volume nearly so.
          4. Turn off File Vault, if enabled.
          5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
     A. Snow Leopard and earlier versions of OS X
          1. Insert the original OS X install CD/DVD that came with your computer.
          2. Restart the computer while holding down the C key to boot from the CD/DVD.
          3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
              Optionally, click on the Security button and set the Zero Data option to one-pass.
          4. Install OS X.
          5. Upon completion DO NOT restart the computer.
          6. Shutdown the computer.
     B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

I am installing Adobe Acrobat on a Mac with OSx Mountain Lion - gives me this error DW006 any ideas?

I am installing Adobe Acrobat on a Mac with OSx Mountain Lion - gives me this error any ideas?
ERROR: DW006: Apple Package failed to install successfully.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

No there is not enough information in this snipped of your installation log. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review the installation log in it's entirety.

Mountain lion will not install on late 2010 Mac pro

Mountain lion won't install on late 2010 Mac pro 8 core. After downloading mountain lion I ran the installation software but it gives me the error mountain lion failed to load and doesn't restart the computer.

Welcome to Apple Communities
Open Finder, select Applications, delete the installer, open App Store > Purchases and download OS X

Need to install 11g on MAC OS X Mountain Lion

Hi,
Is there anyway Oracle 11g can be installed on MAC OS X Mountain Lion? without using a VM / VirtualBox that is.
Edited by: 992842 on Mar 9, 2013 10:37 AM

Hi,
Are you talking client or server?
Are you even talking database technology?
- 11g is just a marketing name
Did you try googling for Oracle on MAC?
Have you seen the MAC forum
Oracle on Apple Mac OS X
Installation forum
Database Installation
Client down load page
http://www.oracle.com/technetwork/database/features/instant-client/index-097480.html
Oracle on MAC home page
http://www.oracle.com/technetwork/topics/macos/whatsnew/index.html
Regards
Peter

How to re-install iLife 2011 in Mac OS X Mountain Lion unit after you formatted and reinstall OS X?

How to re-install iLife 2011 in Mac OS X Mountain Lion unit after you formatted and reinstall OS X?

Sign into the App Store with your Apple ID, click on the Purchases icon in the toolbar, locate the three iLife apps and redownload them.

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

How do I get MS Office 2011 to install from DVD on Mountain Lion?

I just did a clean install of OS X Mountain Lion from a prepared bootable SD-Card on a new partition of my harddrive and wanted to install Microsoft Office 2011 using the original disc. But after double clicking the installer icon nothing happened besides the rainbow colored spinner showing up and disappearing shortly after and my optical drive making some noise. Activity Monitor indicated that the process of the Installer application doesn't react so I had to force quit it. I tried it multiple times to install MS Office this way using the disc but the problem persisted, also after a reboot.
So far my system is still in a pretty fresh state since I installed hardly any separate apps yet and the most intrusive one of them is probably merely Sophos. OS X's Installer app worked the way it should when I was installing iLife the day before using the Applications Install DVD that came with my Mac.
When I installed Office 2011 the first time, presumably one year ago on another partition on the same Mac which was running OS 10.6, everything worked fine and the same is true for the time when I upgraded to OS 10.7 (although I didn't install Office again, I just kept everything on the same partition).
So is there anyone out there who experienced similiar problems and can please help solve this problem?

Well, that depends on what you mean when you say "verified". But as I wrote in the first post I was able to install iLife from disc on Mountain Lion without much ado. And just now I tested a DVD with some pictures on it and the disc drive would read and display all photos in Preview.
And given the facts that I rarely use my optical drive at all and that my machine is only little more than a year old, a drive failure seems quite unlikely. But thanks for your response anyway!

Is there a way to run Internet Explorer on a Mac mini with mountain lion?

I need to access a professional website that only works with IE (don't get me started on THAT) I need to do billing using this site so need to have full functionality. Is there a way to run IE on my mac mini with mountain lion?

The key takeaway here is that yes, you can access Windows 7 (and IE 9) from OS X Mountain Lion.
The crucial question is about your workflow. If you need concurrent access to both Windows 7 and Mountain Lion, then the Bootcamp solution included with Mountain Lion would not be the right choice. You would need one of the virtualization solutions.
If you need helpdesk support from a paid product, rather than entirely from a community forum, then the latest Parallel's Desktop or VMware would be a matter of choice, with Parallel's the better decision at this point. Either of these products are under $100, in addition to the cost of a Windows 7 license. You may need the Windows 7 installation media as an .ISO file, rather than on DVD. Check requirements.
By example, I use Oracle's VirtualBox (free) on Mountain Lion, with a Windows 7 Home Premium 64-bit guest. The interactive and network performance of this Windows guest are more than adequate on my 2011 mini. I assigned 3 GB memory and 2 of 4 processor threads to the Windows 7 guest. I also restricted guest CPU use to 80%. VirtualBox is installed on my SSD, but the Windows guest is on an external HDD. That is not a default configuration. There are multiple choices for display; from full-screen 1920x1200 (mine) to an isolated resizeable window, to seamless integration with OS X. The Apple keyboard, bluetooth devices (trackpad/mouse), and printer all are recognized. I also have a shared OS X folder with VirtualBox, and copy/paste integration.
I use VirtualBox as it meets my support (forum) and functional requirements.
Best wishes,

Pourquoi apres avoir installé mac OS X mountain lion tout logiciels installé par internet ne s'ouvre pas ( skype , vlc ... )

Similar Messages

Maybe you are looking for