Power cords please help!

I need appliances (washer/dryer, fridge, stove). Do I need to buy a power cord separately for any of these? I noticed there was an option online to add a power cord.

*clears throad*
Ok, here's the deal. If all appliances are ELECTRIC:
Washer, Dryer: Dryer Duct Vent (SKU: 9282812), Washing Machine Fill Hose(SKU: 5446387), and 3 (SKU: 2900490) 
or 4 (SKU: 3921046) prong power cord. 
Fridge: If waterline is present, your choice of varied waterline install kits.
Stove: 3 or 4 prong range cord.  ( 7045618 or 7045707, there are other options but none cheaper )
YES, you may use your own accessories. BUT, if you get Best Buy's accessories and it's all electric (NOT gas), installation, leveling, etc, will all be free on the items you listed. It would be done by the delivery people. For the fridge, this assumes that a waterline is present with a valve on it. For the washer, it assumes a proper drain spout is there.
The reason that Best Buy's items must be used is for certification purposes. You can't expect them to certify and back up something hooked up using an old part, can you?
For all items, haul-away and recycling are included free (regardless if you get the accessories or not), but there are conditions - it can't be obscenely hard to remove these items from the house, etc. 
I hope that answers your questions?
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Similar Messages

  • Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

    The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
    So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
    ANY HELP OR ADVICE WOULD BE HELPFULL,
    THANKS GUYS

    THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
    BUT YEAH THANKS AGAIN...
    WASTE OF TIME THIS IS...

  • 3400 i-trigue speaker power cord: Need Help!

    I have 3400 i-trigue speakers. I got the speakers a year and a half ago, and Creative is still selling them. I lost the power cord- the cord that plugs the subwoofer into the wall (2 volt 4.2 amp). Creative has been "out of stock" of a replacement cord since early May, and one honest customer service employee told me that they likely will not be getting anymore back in. I cannot find a replacement cord anywhere online or at an electronics store like Radio Shack. I am not an electronics expert, and I don't know what to do. (Creative Labs has NOT been very helpful). I desperately need this $2 cord, but it seems my only option is to buy a new set of speakers. Help!

    It would be better to buy a US powercord and then a plug adapter for Australia but you could use an Australian adapter with a US plug adapter. The power "brick" is the same and handles input from 100 to 240 volts so works anywhere in the world; you just have to get it plugged in to the local power supply. When you say the cord broke I guess I am thinking you mean the power brick broke; if not you can just get the part of the adapter (cord) that runs from the brick to the wall at the equivalent of a Radio Shack in Australia then get a US one when you get back.

  • Power Issue- Please help

    Yesterday my power cord stopped working. I was able to move it around so that my computer would charge when it was at a certain position. This led me to believe that there is a broken wire or short in the cord. I purchased a new charger today and it worked immediately and continuously for at least four hours. Then, the new charger stopped working. Frustrated, I substituted the old, broken power cord. Again, this old cord works fine when positioned a certain way. This makes no sense at all to me. I know that the new cord that I purchased today was the correct one for my Macbook. Does anyone have any ideas? I can keep using the broken cord for the time being, but I'm afraid it will eventually stop working completely.

    I can imagine an old cord breaking down and fraying at the connections such that it no longer works except in certain positions. You should return your new defective cord, get a good one and that should solve the problem.

  • G580 power issue, please help

    Hey, currently refuses to power up.
    There is a light to say the battery is getting power when it is plugged in, but pressing the power button give no responce at all. No fan, no moniter, no lights. Does anyone have a solution or do I have a paperweight now?

    Hi ShouAS,
    Sorry to welcome you to the Community under these circumstances.
    This is a long shot,  unplug it, take out the battery and push and hold the power button for 10 seconds.  Do that at least three times, then plug in just the ac adapter, (not the battery) and see if it starts.  
    Dave
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • MacBook Pro - New out of Box won't power up - Please help me

    I have reformatted this question several times.
    Buy 15" rMBP from Apple Store.  Take home.  Sits sealed in box on shelf in closet.  Open sealed box.  Won't power up.
    Take back.  Genius bar has no idea.  No signs of damage - water/fall/fire etc.  Cord works.  They send to Apple to fix since I have Apple Care (3 year)
    Apple Cares says Water Damage.  This is impossible.  Had out of box 5 minutes.  Genuis bar vetted that as possibility.
    Apple sends pics from Depot of water logged rMBP.  Go back to Apple Store.  Genius Bar confirms that it wasn't like that, notes system.
    Tech support says pay $1200 to fix, or they are sending back.
    What can I do?

    Apple Customer Relations 1-800-767-2775
    That's a higher level of supprt for dispute resolution.

  • Brand New Never Used Macbook Pro Will Not Power On. Please Help!

    Ok so I just recieved my Macbook Pro 13" in the mail today, and when I went to turn it on it wouldn't. The power-up sound doesn't play and I have full battery power. I followed all of the steps leading up to the power-up step so I don't know what is wrong. I also tried all of the suggestions mentioned in the user guide, and don't know what to do next. I guess I will bring it in to the store soon if I can't get it fixed. Kind of disappointing since it is my first mac...

    Lol yeh it came almost fully charged. I called Apple and am going to now send it back because it is DOA. Now I get to wait for at least another week before I get a new one. Ty for your responses.

  • Powerbook won't power on---please help!

    Left Powerbook on overnight. This morning couldn't wake it up. Blue light at latch pulsing but nothing would wake it. Also noticed no color at battery charge input where it is usually green or orange, there was no color.
    Finally took off the battery, left it off for the internal to run down, and when the pulsing light finally went off, I put the battery back. And now I still can't get it to power on.
    I would appreciate any advice on what to do next.
    Thanks!

    Try a PMU reset:
    1) If the computer is on, turn it off.
    2) Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
    3) Wait 5 seconds.
    $) Press the Power button to restart the computer.
    from this Apple article:
    http://support.apple.com/kb/HT1431

  • My iPod touch4th generation touch screen is not responding at all I can't slide to unlock or power off  please help I have restored it and done a force reset and every thing an I can not take it to apple due to my warranty is up

    Help me please

    HI
    try conneting it to itunes and restore it .that might help.it that doesnt call apple support and ask tem to help or just goto the apple store nearest. A good place for repairment is bestbuy geeksquad...and r u sure your warranty is up check again ...
    hope this helped

  • My Mac Pro wont power on please help

    My mac pro wont start up.
    I have already checked the power supply, fuses and have tried to zap the PRAM and changed the internal battery.
    The on/off button is completely unresponsive and no light is showing on the monitor

    To make progress, you need the fans to come on and the Chime. The conventional way to debug this issue is to remove EVERYTHING that could be drawing down too much power, and try for the chime.
    Remove:
    Graphics card
    any other PCIe cards
    Hard Drives
    DVD Drives
    external devices like USB devices
    all but one pair of DIMMs
    Then try to power it on. If it chimes, or the power light flashes, it's alive and can be debugged. Add back one item at a time and try for more.

  • I4 wont power up. please help

    My iphone 4 isn't working.  I tried to power it off, but still nothing.  Any ideas?

    Reset, hold together Home and Power buttons for about 15 seconds until the iPhone powers on. If that does not work. Connect to the wall charger and charge it up a bit, it may startup in about 5 minutes, let it charge. If after charging for about 30 minutes, and still nothing, try the Reset again with both buttons. You question is confusing, "wont power up" then you say, 'I tried to power it off, but still nothing"????

  • Power cord replacement

    Received this Shipping Notification:
    Thank you for choosing HP for your technology needs. We value your business.
    This is an automated shipping confirmation of an order you placed for the HP AC Power Cord Replacement Program.
    Your order was shipped on 11/17/2014 via DHL GM using tracking number
    Please follow the instructions you will receive with your replacement AC power cord to dispose of your defective AC power cord.
    Order Details:
    Order No:
    Order Date: 11/13/2014
    Item(s) Information:
    Item No:
    Description: Replacement power cord – INDIA wall plug
    Unit Price: $0.00
    Quantity: 1
    Thank you for your order. We apologize for any inconvenience you may have experienced.
    Hewlett - Packard Company
    But DHL website reports no results for it.
    very confusing how & when I will recieve the power cord.
    please help on this topic.

    Hi,
    Please wait for 48 hours.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • My iphone don't have power. I am using a iPhone 5 automatic turn off. Now I press power but it don't turn on. Please help me. Thank you so much

    Dear Apple,
    I am using an iPhone 5. It automatic turn off after that I press power on iphone but it don't turn on power.
    Please help me. Thank you so much.
    <Personal Information Removed by Host>

    Try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. You may need to connect the device to the charger before you attempt the reset.

  • I m trying to write to a Mainframe file from informatica mapping. I have created the data map for tarrget file and have imported it in informatica designer.After completing the mapping when i try to run it gives me below error. Please help me out in resol

    This is not a PC/PWX problem, but a mainframe security problem. TIDSS01.POS.IBD.DR0100.DAT is not a GDG file name.It might be the base for a GDG. A GDG file name would look something like eitherTIDSS01.POS.IBD.DR0100.DAT(+1)orTIDSS01.POS.IBD.DR0100.DAT.G001V00 So I suspect that you have the wrong file name.Please talk with your mainframe team.

    HI Dan, I am very new to using power exchnage please help me through this issue, Below is the details : My data map name :postest.test1_POS
    Copy book name which is used to create the power exchange Datamap : TIDSS01.ACTRLP.TEST(POSCPY)
    Main frame GDG name : TIDSS01.POS.IBD.DR0100.DAT Below are the Session properties i have set in informatica workflow:Schema Name Override : postest
    Map Name Override : test1_POS
    PWX Partition Strategy : Overrides driven
    Space : CYLINDER
    File Name Override :TIDSS01.POS.IBD.DR0100.DAT(+1)
    I am getting below error: PWXPC_12190
    Message: [ERROR] Transformation [test1_POS]: A permanent error has been encountered in PowerExchange: [
    [Informatica][SCLI PWX Driver] PWX-00267 DBAPI Error. DB_INSERT failed for file postest.test1_POS.
    [Informatica][SCLI PWX Driver] PWX-01279 DBNTC INSERT failed for file postest.test1_POS. Rcs 1274/2019/268.
    [Informatica][SCLI PWX Driver] PWX-01274 DBNTC INSERT Failed for file postest.test1_POS, rcs 260/2019/268.
    [Informatica][SCLI PWX Driver] PWX-02019 SQL insert failure. SQLCODE = 268.
    [Informatica][SCLI PWX Driver] PWX-00268 DBAPI Error. DB_OPEN failed for file TIDSS01.POS.IBD.DR0100.DAT.
    [Informatica][SCLI PWX Driver] PWX-00220 DYNALLOC failed for file TIDSS01.POS.IBD.DR0100.DAT RCs = 9700/0.
    [Informatica][SCLI PWX Driver] PWX-00221 DATA SET: TIDSS01.POS.IBD.DR0100.DAT WITH RETURN CODE 08 REASON CODE 00   
    [Informatica][SCLI PWX Driver] PWX-00221 RACF FUNCTION: RACDEF FOR   
    [Informatica][SCLI PWX Driver] PWX-00221 IGD308I DATA SET ALLOCATION REQUEST FAILED -   
    [Informatica][SCLI PWX Driver] PWX-00221 IKJ56893I DATA SET TIDSS01.POS.IBD.DR0100.DAT NOT ALLOCATED+   
    [Informatica][SCLI PWX Driver] PWX-07404 Permanent error set by Open call on file "TIDSS01.POS.IBD.DR0100.DAT" because dynamic allocation failed. rc=4
    [Informatica][SCLI PWX Driver] PWX-07515 Insert call for table postest.test1_POS met a permanent error. Return codes 267 2019 268.
    ]

  • Power cord not lighting up!

    So usually when I plug the power cord into my macbook pro, the light does not come on. At first, I figured it was a problem with the cord because it was old (both computer and cord purchased in 2005) and because when I messed around with the connection on the "brick" and moved it around, it would work.
    Now, I bought another power cord, and it is doing the same thing. I can still get a good connection, but it sometimes takes a good 5-10 minutes of screwing with the power cord. Help!?

    Does the new mag safe have an "L" shaped end instead of a "T" shaped end? I have heard that there have been some problems getting them to work properly with original MBP's.
    http://support.apple.com/kb/TS3499
    Not sure which Mac you have or if it might need the update for the charger to work. Best thing would be to do as Baby Boomer suggests, take both adaptors and your Mac in for evaluation.
    Good luck!

Maybe you are looking for