Power designer's Data Architect, Enterprise Architect and Information Architect

Does anyone have product differences between Power designer's Data Architect, Enterprise Architect and Information Architect?

Dear Rahaman,
Please refer to the PD 16.5 packaging options below and you can't miss the differences.
DataArchitect\DM includes Shell/Core*, XML, PDM, LDM
DataArchitect\RE includes Shell/Core*, XML, PDM, LDM, Repository
Information Architect includes Shell/Core*, XML, PDM, LDM, Repository, DMM, CDM, BPM
EnterpriseArchitect includes Shell/Core*, XML, PDM, LDM, Repository, DMM, CDM, BPM, OOM, EAM, EA Frameworks
** Shell & Core includes UI, Gap and Impact Analysis Tools, Reporting Tools, RQM, Free Model, and other common components
There exists different modeling features you can use in each of packages in PowerDesigner 16.
If you want to use a repository for storing models and sharing them with other modelers, you should have at least DataArchitect/RE option.
And, If you should use OOM, then it is required that you have the EnterpriseArchitect option.
Best Regards
Jerry

Similar Messages

Importing logical and physical model from Sybase power designer/Erwin

Hello,
We have several models created in Sybase Power designer, logical and as a well as physical. Is there a way to directly import models into Oracle designer?
Thank you for your help.
Syed

Hi Syed,
ERwin has a facility to export to Designer 2000. Of course you're probably not using Designer 6.0 or earlier so it's of little use.
I have been looking at a couple of tools for importing from ERwin: Reischmann Informatiks TOOLBUS Interface for Oracle Designer and ALLFusion ERwin; and Meta Integration Technologys Meta Integration Model Bridge (MIMB). Neither product is free (nor inexpensive) but if you've got a number of models to convert then the tools seem cheap by comparison. Also, none of the products that I've looked at recreate the actual diagrams (not that I expected them to).
I am leaning towards TOOLBUS as it provides more complete migration of Logical and Physical models (especially the linkages between the models) using Oracle Designers API rather than a DAT file as provided by MIMB.
Hope this helps,
Wayne Lehman
Avanti Business Systems Inc.

Rack design for two ONS 15454's and two 15540-PWR-AC power supplies...

Looking for advice setting up two ONS boxes with two 15540-PWR-AC power supplies. The manuals/CCO show rack design for just the ONS boxes and a fuse/alarm panel. I have two side by side racks for the gear. Has anyone set up the power supplies for an ONS installation? Any feedback would be great.
thx.
- Ted

Review the AC/DC Power Solution Data Sheet:
http://www.cisco.com/en/US/products/ps6063/products_data_sheet0900aecd801a002a.html
Per the Data Sheet...
The Medium will power 1x 15454
The Large will power 2x 15454
A few things to note...
1. The Power Solution can possibly power more 454s based on the actual power draw of the nodes.
2. There are only 4 circuit breakers on the Large expansion panel. A & B power for 2 454s.
3. It is recommended 454s have 30A fuses/breakers per power source. This can change based on the actual hardware config.
4. You could possibly use the 15A GMT fuses.
5. You could possibly incorporate an external PDU for additional fuses.

How to start Designing Master Data and transactional Data

Can anyone tell me how to really start to design Master Data and transactional Data in Sales? What are the steps if is it possible to share? Thanks!

Hi Lei,
first step is to read all necessary document on help.sap.com about Business Content for SD. Here you can see all the parts covered directly by SAP with the Business Content.
Then you can start the GAP analysis: you check if all your requirements are fully covered by BC or not, in this second case you can start developing your own InfoObjects.
Start always by Business Content.
Take a look also at this doc:
<a href="https://websmp110.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E">https://websmp110.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E</a>
Ciao.
Riccardo.

Data of FI, SRM and R3 in MDM

hi!
here's my question;
what information should i take for the three systems?
what happen if i create the mdm schema with all the fields, and tables that are used in FI, SRM and R3 and create a big repository with one main table of products, and a big subtable of suppliers?
the performance will be affected?
is there any documentation that explains how many subtables you can use? or what to do in this cases?
thanx

In general this is not a good idea. There are several reasons for this:
First is performance. In order to mimic the complexity of the ERP data models, you would have to incorporate a large number of qualified lookup tables. The more complex relationships you have in your MDM data model, the worse the performance will get. MDM has to index all of the attributes you configure (for keyword or sorting) in the data model which has a hit on the memory of the server. Additionally, your Import and Syndication Servers are going to choke if you have a large attribute set.
Next, in SAP there are some tables that have a matrix of lookup values. For example, sales office field in the sales area is dependant upon a configuration which is a combination of sales area plus other things. So you have the following affect:
x [ 1, 2, 3]
y [ 4, 5, 6]
z [ 7, 8, 9]
If I select X, I want 1,2, and 3 to be available to me. If I select X and Y, then I want 1, 2, 3, 4, 5, and 6 to be available to me. This sort of complexity is very difficult to rebuild into MDM.
Third, there are some attribute sets in ECC which have proven to be incredibly difficult to build into MDM for technical reasons. For example, Partner Functions.
You want to design your data model to be restricted to enterprise level attributes (if possible). This gives a more global view of the entire landscape.

Questions on Enterprise Planning and Budgeting

Hi,
First of all: this may be a very wrong place for posting these questions. However, I could not find a forum that seemed closer to the matter so I try it anyway.
With EPB close to hitting the streets, some questions starting popping up - especially now that Oracle has recommended one of my customers - who is just starting out with Business Intelligence and are not E-Business Suite users - to embark on the EPB course.
It is stated by Oracle that EPB - although it is an integrated component of the Oracle EBusiness Suite â can be used as stand-alone product. You can load data into interface tables. Questions:
Does EPB work on its own Data Warehouse and if so, is this DWH also available to other OLAP tools for Analysis? Or should organizations doing Analysis and Reporting apart from EPB have a separate DWH for those OLAP queries?
Does Oracle recommend loading data directly from operational sources into the FEM Interface Tables or does Oracle think it best for non-EBusiness Suite customers to set up a Data Warehouse independently of EPB and in a later stage implement processes to extract data from that DWH into the FEM Interface. Are the FEM Interfaces tables at the operational (fact) level or do they already have some sort of consolidation in them?
Can Oracle somehow convince us that while EPB does not provide hooks for customization it will offer reports desired by non-EBusiness Suite customers with potentially very varied businesses? How much of EPB benefits are you missing out on if you do not have the E-Business Suite? What is EPB then giving you that with OWB and BI Beans/Discoverer you can not easily build yourself?
The specific case of my customer: they have clear requirements for Management Information. Most of these are about analyzing histrical data (the classic slicing and dicing); forecasting and budgeting would be a nice to have in the longer run. They currently do not have a proper Data Warehouse. They have a consolidation point for some operational data. No dimensions have been defined, no data cleansing is performed and some data is not available at all. I am wondering whether EPB would be the proper tool for them to start with. Given their requirements as well as their lack of current experience with BI as well as the relative uncertain situation with regard to the data sources, I would feel more comfortable with a more down-to-earth approach: start designing a DWH and the processes to populate it as well as developing the most urgently needed reports. In that case, EPB would be brought in at a later stage â when the organization as well as the data management is ready for more advanced stuff.
Is there anyone, especially from Oracle, who would care to comment? Also on my feeling that Oracleâs recommendation to use EPB is perhaps somewhat influenced by Oracleâs desire to build up references and experience with this brand new tool â that, as I understand it, is not even generally available â only a âcontroller releaseâ is available right now.
Thanks for anyone for your insights.
best regards,
Lucas

Lucas
Please note these are not official Oracle or my employers answers, just my interpretation. Hope this might help though.
"Does EPB work on its own Data Warehouse and if so, is this DWH also available to other OLAP tools for Analysis? Or should organizations doing Analysis and Reporting apart from EPB have a separate DWH for those OLAP queries?"
EPB has it's own EPF schema, which it shares with Oracle's other CPM applications, but it's not a traditional warehouse schema arranged as a star schema, you're not supposed to load data directly into it, and it's really designed for storing data that needs to be loaded into AWs for analysis. You'll therefore still need to build your own warehouse schema, and then load data (through the interface tables) into the EPF schema for use with EPB.
"Does Oracle recommend loading data directly from operational sources into the FEM Interface Tables or does Oracle think it best for non-EBusiness Suite customers to set up a Data Warehouse independently of EPB and in a later stage implement processes to extract data from that DWH into the FEM Interface. Are the FEM Interfaces tables at the operational (fact) level or do they already have some sort of consolidation in them?"
It depends. Data can be loaded directly into the EPF (new name for FEM) schema, but you'll probably want to cleanse and transform it first, most probably in a data warehouse. The data that goes into the EPF schema is at transaction level, and EPB will perform any aggregations as it loads data into it's AW. Of course data in the form of balances - that goes into the EPF balances table - will be to an extent already summarised (or at least snapshotted) but the twenty user data tables are just regular fact tables, with the granularity set to whatever you require.
"Can Oracle somehow convince us that while EPB does not provide hooks for customization it will offer reports desired by non-EBusiness Suite customers with potentially very varied businesses? How much of EPB benefits are you missing out on if you do not have the E-Business Suite? What is EPB then giving you that with OWB and BI Beans/Discoverer you can not easily build yourself?"
Too early to see really, especially as no-one apart from Oracle has done an EPB implementation yet. With regard to the question about what EPB gives you that OWB and BI Beans don't already give you, I think the relevant bit is "you cannot easily build yourself". EPB is an application, not a toolset, and it'll appeal to those people that want to buy a supported planning and budgeting application from Oracle, that integrates with e-Business Suite and doesn't require them to build everything from the ground upwards. With OFA and OSA you could have course build a similar application yourself, using Visual Basic or Express Objects and Express Server, but for most people buying it from Oracle was a more sensible solution.
"The specific case of my customer: they have clear requirements for Management Information. Most of these are about analyzing historical data (the classic slicing and dicing); forecasting and budgeting would be a nice to have in the longer run. They currently do not have a proper Data Warehouse. They have a consolidation point for some operational data. No dimensions have been defined, no data cleansing is performed and some data is not available at all. I am wondering whether EPB would be the proper tool for them to start with. Given their requirements as well as their lack of current experience with BI as well as the relative uncertain situation with regard to the data sources, I would feel more comfortable with a more down-to-earth approach: start designing a DWH and the processes to populate it as well as developing the most urgently needed reports. In that case, EPB would be brought in at a later stage â when the organization as well as the data management is ready for more advanced stuff."
Yes, I'd agree with this approach. EPB isn't the place to start integrating and consolidating data, and the EPF schema isn't where you'd want to store your complete data warehouse. You could of course, using the twenty data tables and the user defined dimension tables, but you'd pretty much be limited to querying via EPB (the schema isn't really suitable for querying directly using tools such as Discoverer) and the AW that EPB creates wouldn't be suitable/supported/documented for use by regular OLAP API tools such as Drake or the BI Beans. If it was down to me, I'd build the warehouse as normal, using OWB or any other ETL tool, create my dimensional model as normal, then take selected data out and put it in the EPF schema, and then carry out my planning & budgeting using EPB. I'd then still run Discoverer / Discoverer "Drake", or BI Beans or any other ad-hoc query tool against my warehouse schema for the warehouse "power users", and use EPB as the application for my finance and planning department,

How to get data for current week and previous week using customer exit in Bex.

Hi everyone,
I have a scenario in which I need to display data for current week and previous week (based on "sy_datum" the program has to calculate current week and previous week) in Bex using Customer exit. I have created one variable in Bex Query Designer and I have written code for the variable in CMOD. But it is not working fine, (I know that we can do the same by using offset value in Bex). Can some one guide me how to achieve my requirement using customer exit.
Thanks in Advance,
G S Ramanjaneyulu.

Hi krishna,
Thanks for your quick reply, can you have a look at my code,
case i_vnam.
WHEN 'ZPWK_CWK'.
ranges : pre_week for sy-datum.
data : start_date type DATS,
       end_date TYPE dats .
************FM TO GET FIRST DATE OF CURRENT WEEK ************************
CALL FUNCTION 'BWSO_DATE_GET_FIRST_WEEKDAY'
EXPORTING
    DATE_IN = sy-datum
IMPORTING
    DATE_OUT = start_date.   " WEEK FIRST DATE
end_date = START_DATE + 6.   " WEEK LAST DATE
END_DATE   = START_DATE - 1.   " PREVIOUS WEEK END DATE
START_DATE = START_DATE - 7.   " PREVIOUS WEEK START DATE
**********PREVIOUS WEEK DATES IN PRE_WEEK******************
pre_week-SIGN   = 'I'.
pre_week-option = 'BT'.
pre_week-LOW    = START_DATE.
pre_week-HIGH   = END_DATE.
APPEND pre_week.
CLEAR : START_DATE,END_DATE.
endcase.
Regards,
G S Ramanjaneyulu.

Visual design view in Studio Enterprise 8

I have recently discovered both Studio Enterprise 8 and Studio Creator, previous to which I was only using netbeans. However, I've been looking for a way to create either JSP applications or standar java applications with an IDE that has a visual design view in it.
Studio Creator has a visual design view only for JSP pages, but it does not seem to have the robustness of Studio Enterprise 8. Studio Enterprise 8 has a Palette tool, but for the life of me I cannot find the visual design view in it. Is there a way to activate a visual design view in Studio Enterprise 8? or, do I need to download an add-on?, or do I really need to create projects in Studio creator to later transfer only the JSP pages to Studio Enterprise?
Any help would be greatly appreaciated.
TGD

Besides the visual designer for JSP (Creator) , Swing GUI and UML (JSE8), what other types of visual designers are you expecting or wish for in JSE 8?

New JAVA application with data from SAP CRM and R/3

Hi All,
We have a requirement to create a new application which will have CRM BP Master data and D&B Data from R/3 and based on authorization different roles be able to edit some of the fields and workflows to confirm the new data .Once users edit the fields in the application the new data will be replicated back into BP Master Data in CRM.
In our company we are using CRM 7.0 and R/3 4.7 system if we decided to create the application using JAVA can you please let me know the architecture(servers etc) we might need because of the JAVA application.
How to connect Java application to SAP CRM 7.0. Can you please guide me the data flow structure
I am not sure if this is the right forum if not please suggest appropriate forum.
Thanks a lot ,
Kitcha.

Hi,
You can connect to SAP Systems by consuming the RFCs.
you can use the JCO API to connect to R/3. the [documentation |http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/content.htm]
alternatively you can use SAP Enterprise Connector to generate JCO Proxies : [The Documentation|http://help.sap.com/saphelp_nw04/helpdata/EN/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm]
and somr more helps:
http://help.sap.com/saphelp_nw04/helpdata/en/89/8a185c148e4f6582560a8d809210b4/frameset.htm
Regards,
Naga

How do I get the power manager settings to take hold? And stay that way?

I want to have my computer awake while on the battery and while I'm driving my car. To reduce distraction, I want to have the lid closed.
In order to make this mode easy to get to, I created a new power plan that has the "lid-closed" event result in "do nothing". Sometimes, this works. Sometimes, the computer goes to sleep. It is exceedingly annoying when the computer goes to sleep because I will get to my destination 45 minutes later and find that the computer didn't do what I wanted.
I've also noticed that the setting for "do nothing" sometimes bleeds over to other power plans. This is also a problem because, under ordinary situations, I would like my computer to behave normally.
Here's a summary of the situation:
1. I've disabled the "apply the settings to all power plans" button.
2. I've created a new power plan called "Logging" that should stay awake when the lid is closed. This power plan will sleep after 65 minutes and hibernate 10 minutes after that (on battery).
3. This plan stays awake sometimes, but not other times. At this instant, sitting in my living room, it refuses to stay awake. Oops, just tried it and now it works (a little consistency here would be nice).
4. As a case example, this morning the computer behaved as expected: I arrived at my destination and it was still away and logging. This afternoon, I woke it up and started logging, closed the lid, and drove off. Upon reaching my destination, I discovered that the computer went to sleep as soon as the lid was closed.
5. The program I'm running logs data points. When the computer sleeps, data points don't get logged. Therefore, I know the computer is sleeping because, after a long logging session (45 minutes), there will only be a few seconds of data points (which correspond to the amount of time it takes to close the lid). If the computer goes to sleep after 10 minutes or 30 minutes, there would be many more data points.
6. When the computer hibernates or sleeps, it seems to remove whatever change I last put into the plan. Even so, the plan still "says" that the change is there.
Ultimately, the difficulty here is that I can't predict what the computer is going to do. If I could, then I could adjust my use pattern.

Try this:
Go into Power Manager, choose the Logging profile.
Go into Windows' Power Options, choose a different profile, then switch back to the Logging profile.
See if this clears any contradiction between the two.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Fetch data from one table and insert into two tables in desired format

I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion.
DECLARE @NewDoc TABLE (newDocID INT)
INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the
group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
How do I accomplish the above using SQL ? Thanks for the help.

>> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
this?
CREATE TABLE Old_Documents
(old_doc_id INTEGER NOT NULL PRIMARY KEY,
group_id INTEGER,
dept_nbr INTEGER NOT NULL
REFERENCES Departments (dept_nbr));
INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr)
VALUES (1, NULL, 111),
(2, NULL, 111),
(3, 1, 111),
(4, NULL, 333),
(5, 1, 222),
(6, NULL, 333),
(7, 2, 222),
(8, 2, 333),
(9, NULL, 111),
(10, 3, 222),
(11, NULL, 333),
(12, 3, 444);
>> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called attribute splitting.
Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel!
>> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
as 3 and 5 belong to the same group_id =1) for insertion. <<
Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
CREATE VIEW New_Documents (new_doc_id)
AS
SELECT old_doc_id
FROM Old_Documents;
>> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
<<
Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
https://www.simple-talk.com/content/print.aspx?article=2020
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Difference between Due Date for All Tasks and Duration per task in an approval workflow

Hello,
I'm starting to read up and learn about approval workflows in Designer 2010. I am confused by the fields "Due Date for all Tasks" and the "Duration per task". I understand that the Due date for all Tasks is the date that all
of the tasks in the workflow must be completed by. And I understand that the duration means each task has x number of days to complete.
But I dont know whey we need them both. If I have the task duration set to two days and there are 3 tasks involved, then wouldn't the due date be 6 days from the start? Why would I have a due date for all tasks that is completely different than
the sum of the duration of days for each task?
Please help shed some light!

Hi Michelle,
Due date for all tasks, this setting specifies the date by which all tasks are due. It’s used for serial and parallel
task.
Duration per tasks, this setting specifies the date by which an individual
task is due, it’s used for serial workflow participants.
Note, when you create an approval workflow, select task process participants(approvers oob approval workflow), we can also
select once at a time(serial) or all at once(parallel).
For more information, see
http://office.microsoft.com/en-us/sharepoint-server-help/use-an-approval-workflow-HA101793831.aspx
Best Regards.
Kelly Chen
TechNet Community Support

Data Slice dynamic activation and deactivation for a set of users

Hi Experts,
                 We have requirement to manually enter the data into RTC using IP.
There are 2 sets of users --> Power Users and Normal Users.
We need to allow the normal users to enter the data only from 1st to 5 th working day of every month.
Power Users should have authorization to edit and enter the data at any time.
Can any one suggest how to set the dataslice using code.
Regards,
Shashi

Hi.
Please note that update of RSPLS_DS table do not affects at RUNTIME.
If you want to create dataslice that activated and deactivated within sequence run you should do the next:
1. Create exit variable that return you all working days EXCEPT 1 to 5 of each month.
2. Create dataslice in modeler on this characteristic with restriction by this exit variable.
3. This dataslice should be based on ABAP class as described [here|https://www.box.net/shared/zhirrvk859].
4. In mydataslice method enter following code (I assume you have any DSO with definition whether user is power user or not. Lets say DSO has next structure:
USER   | Z_IS_POWER   |
aaaa    | NO
bbbb    | YES
Enter the next code in mydataslice method:
SELECT Z_IS_POWER FROM YOURDSO INTO lv_POWER WHERE USER=sy-uname.
IF sy-subrc = 0. *This is SUPER USER. Allow locked data edition
e_noinput = rs_c_false.
ELSE. *This is regular user. Do not allo locked data edition
e_noinput = rs_c_true.
5. Create in modeler 2 planning sequences for activating and deactivation dataslice as described in document.
6. Each time you want to do something with locked data run first sequence for deactivation of dataslice. If super user will run it so dataslice will be deactivated, but if regular user - dataslice will lock the data.
Regards.

Design view is unavailable for x64 and ARM target platforms. - Visual Studio 2013 Update 3

Hello. I am having this problem at design view when i set project to x64. However problem disappear when i set to any cpu which makes it 32 bit.
Design view is unavailable for x64 and ARM target platforms.
Here my full XAML code
<Window x:Class="doktora_tez_projesi_crawler_program.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="clr-namespace:doktora_tez_projesi_crawler_program"
Title="Doktora Tez Crawler" Height="874.099" Width="1092.99">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="827*"/>
<ColumnDefinition Width="258*"/>
</Grid.ColumnDefinitions>
<Button Content="Init Root Crawlin - This Deletes All Data" HorizontalAlignment="Left" Margin="10,10,0,0" VerticalAlignment="Top" Width="279" Click="click_start_Crawling" />
<ListBox Name="lstBoxEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollection }" Height="138" Margin="10,155,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxMoreCommonFiredEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionMoreCommonFiredEvents}" Height="265" Margin="10,298,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxLinkCountFireEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionLinkCountEvents}" Height="265" Margin="10,568,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics}" HorizontalAlignment="Left" Height="114" Margin="10,36,0,0" VerticalAlignment="Top" Width="426">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics_2" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics_2}" HorizontalAlignment="Left" Height="114" Margin="441,36,0,0" VerticalAlignment="Top" Width="634" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<Label DataContext="{x:Static local:PublicStaticFunctions.ocEventsCollection }" Content="{Binding Path=[1]}" HorizontalAlignment="Left" Margin="324,10,0,0" VerticalAlignment="Top"/>
</Grid>
</Window>
Browser based Pokemon Style MMORPG Game Developer Used asp.net 4.0 routing at it's
Monsters

Hi MonsterMMORPG,
I made a mistake in my previous reply. What I suggested is that you created a new and simple WPF app, set the platform to
x64 rather than x86, and then build the app to check the result.
If a new WPF app also has this issue, then I doubt whether this issue is related to your VS.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
no it doesn't happen
it is triggered by one of these bindings in the xaml
<ListBox Name="lstBoxEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollection }" Height="138" Margin="10,155,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxMoreCommonFiredEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionMoreCommonFiredEvents}" Height="265" Margin="10,298,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxLinkCountFireEvents" HorizontalAlignment="Left" ItemsSource="{x:Static local:PublicStaticFunctions.ocEventsCollectionLinkCountEvents}" Height="265" Margin="10,568,0,0" VerticalAlignment="Top" Width="1065" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics}" HorizontalAlignment="Left" Height="114" Margin="10,36,0,0" VerticalAlignment="Top" Width="426">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
<ListBox Name="lstBoxGlobalStatistics_2" ItemsSource="{x:Static local:GlobalStats.myObserveGlobalStatics_2}" HorizontalAlignment="Left" Height="114" Margin="441,36,0,0" VerticalAlignment="Top" Width="634" Grid.ColumnSpan="2">
<ListBox.ItemsPanel>
<ItemsPanelTemplate>
<StackPanel />
</ItemsPanelTemplate>
</ListBox.ItemsPanel>
</ListBox>
Browser based Pokemon Style MMORPG Game Developer Used asp.net 4.0 routing at it's
Monsters

Need help on designing downstream data sync with OLite

We are trying to build a disconnected desktop application for CRM Sales Application.
For Data Synchronization, we would like to use TRS (Transaction Replay Service) for upstream sync (data from client to enterprise server).
For downstream sync (data from enterprise server to client machine), we would like to see whether we can make use of OLite data sync feature.
The client side db schema will be different from the server side db schema.
We have a web version application built using ADF framework (a list of BC4J objects).
We are going to create the client side db schema based on the shape of Sales View Objects.
e.g. an OpportunityVO (view object) is join based on opportunityEO (table) and customerEO (table to get the customer name). In this case, we are going to have opportunity table at the client side that has all the opportunityVO's attributes defines as table columns.
Questions
1. Can we define a publication item based on a view object? And how ?
2. Can we define a publication item based on a db view (at the server side) that
synch with a db table ( at the client side) ? If so, where do we set the mapping?
3. During the compose phase, we would like to call bc4j object’s api to collect the
data content for client to download, is it possible ? if so, how to do this?
(We would like to use the oLite feature to identify changed records, but we do
want to use bc4j object api to get the data content for client to download.)
Thanks

I haven't given your description of the project and approach a lot of thought yet, but I did see your questions and thought I might point out some help there:
1) Yes, you can define publication items on Views. Section 3.4.1.3.1 in the developer guide discusses this and the requirements of the view.
2) Yes, a publication item defines the base tables for your user. Section 3.4.1.3 in the developer guide is a full discussion on creating publication items programmatically.
Also, you might check into the Mobile Database Workbench for a GUI driven tool to define Publications and Publication Items.
3) I believe what you are looking for here is the MyCompose API. Section 3.6, Customize the compose phase using MyCompose, in the developer guide discusses this.
Gabe

Power designer's Data Architect, Enterprise Architect and Information Architect

Similar Messages

Maybe you are looking for