Power view display more than 500 values in a field

From my research, it looks like the limit of values in a Power View filter is 500. does anyone if this is configurable to increase (which
I am doubting based on Microsoft’s website as I’ve copied below). If it is not configurable and we cannot display more than 500 values when filtering, then what should be done
https://technet.microsoft.com/en-us/library/hh231514%28v=sql.110%29.aspx

You could always do the concatenation on the client. ie: "select action1, action2 from tableX" and then create a boilerplate object with text that references both of these columns. (eg: "&<action1> &<action2>"). This should give you the concatenation you're after.
Another alternative is to return a "long" column instead. The 4000 is probably down to the varchar datatype restriction.

Similar Messages

Display more than 15 Values in Chart

Hi,
I am pretty new to apex, and while this looks like a very basic problem, I couldn't find an answer to it on the web:
How do I display more than 15 value in a simple 'Horizontal 2D Column' chart?
I know that the SQL-Query returns 26 rows, but only the first 15 are displayed in the graph.
Thanks,
Martin

Hi Martin,
have a look at the page with the SQL query. There is a field labeled "Data Point Limit" or "Maximum Rows"
which is defaulted to 15. Just increase this number ...
Does this help ...
-Carsten
Infoseite der deutschsprachigen Application Express Community
http://www.oracle.com/global/de/community/index.html
BLOG: SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

BDC: To Include more than one value in one field.

Hi All,
I want to include more than one value in a particular filed, while its running in back ground.
The requirement is like this
perform bdc_field using 'PNPABKRS-LOW'
'01'.
01 is a filed on employee payroll type : management staff.
02 - Filed staff
03 - work men
How can i include 02 and 03 also for the perform.
it has to check whether the employee can belongs to any of the above three.
Thanks in Advance,
Points Rewarded for Help full answer.

Hi, Ramesh,
You can not use all the 3 fields at the same time, instead you can pass on one variable in that perform.
eg.
take all your staff value in one internal table and use the following code
loop at i_tab into wa_tab.
data : l_variable type string.
perform bdc_field using 'PNPABKRS-LOW' wa_tab-staff.
endloop.
in first run of loop it will take value '01', in second '02' and so on.
regards,
vikas
plz reward if helpful.

How can I display more than one value in Calendar ?

Hi,
the standard (example) script allows for the display of one value only (as I understood). How can I display two or three values, from the very same table ? Students of mine during an HTMLDB workshop in Leipzig did ask that question.
Do we have a more detailed docum. on the use of the calendar ?
pls kindly advise. TIA.
Bernhard

my solution:
Source fo the calendar starts:
snip>
declare
q varchar(32767) := null;
begin
q := 'select "ETA", <--- Date Field and concatination of fields as follows:
"SCHIFFSNAME"|| "ETA_TIME"|| "TERMINAL"||''(br*)'',
null,
null,
null,
null
from "#OWNER#"."SCHEDULE"'; . . . . . . .
snip>
comment on (br*) - you have to use "<" and ">" instead of "( " and ")" to have the "break/new line effect"
brgds
Bernhard

How can I display more than one value in Calendar ? (2)

Hi,
I came across the "Calendar - Activity Monitor by month" in the HTMLDB admin section. This is exactly the view I like to develop asked earlier (the proposal was to work with concatination of fields). Can you provide for the source code used for the a.m. calendar displaying four columns per day ? TIA - Bernhard

if you're talking about the "Calendar of Views by Day" available in the administration section of any workspace (HTML DB Home >> Administration >> Monitor >> Calendar of Views by Day) or the "Calendar of Page Views" in the instance administration interface (HTML DB Administration >> Monitoring >> Calendar of Page Views), they're both implemented as htmldb calendar regions where the multiple values displayed per day are concatenated together with '
' strings between them.
hope this helps,
raj

Displaying More than 2 values using EQ

<af:column headerText="#{bindings.EightDStepD4FiveWhyVO.hints.St4RcSubType.label}" binding="#{eightDStepD4Bean.colRCSubType}" align="center" id="c72" width="125">
<af:selectOneRadio value="#{row.bindings.St4RcSubType.inputValue}"
label="#{row.bindings.St4RcSubType.label}"
binding="#{eightDStepD4Bean.techRCSubType}"
autoSubmit="true"
immediate="true"
rendered="#{row.bindings.St4IsRc.inputValue == true}"
required="#{bindings.EightDStepD4FiveWhyVO.hints.St4RcSubType.mandatory}"
shortDesc="#{bindings.EightDStepD4FiveWhyVO.hints.St4RcSubType.tooltip}"
id="sor1" layout="vertical">
<af:selectItem label="#{row.bindings.St4RcType.inputValue eq '1' ? 'Environment': 'Management'}" value="1" id="si10"/>
<af:selectItem label="#{row.bindings.St4RcType.inputValue eq '1' ? 'Ability' : 'Business Process'}"
value="2" id="si52"/>
</af:selectOneRadio>
In the above code snippet i have two radio buttons to which i have to display the label based on the previous column which is of select one list type having three possible values.1,2,3
I need to display the label for the radio base on the above values. I have used eq operator in which i can display only two conditions.How do i add the third condition .
Please help urgent.

Hi,
Yes this will also work.
I had thought about this option, but 2 things were but considering the EL expression could get complex based on 2 cases
1. If the comparisons increase
2. If the literals to which the comparison are dynamic, (if the list value is not static) then this could be picked up from a property file and evaluated in the backing bean.
Regarding the other concern, the value can be set either in valueChangeListener for event based selections, or in the default method call activity.
Hope this help.
Regards

Display more than 4000 character in a field in reports

Hi all,
we have been using reports 6.0.8.20.1 and database 8.1.7.4.1 in our setup. In a tableX, we have action1 and action2 as two fields of 4000 character each. We want to display the concatenated values of action1 and action2 on a reports page. I see that, if the field length is set to 1000 each, it sums up and allows us to display 2000 character on reports (using select action1||action2 from tableX); but if the fields are 4000 characters, it still allows 4000 characters in total. Is there any way I can bypass this restriction? Seems, we don't have any control over the max length of a field displayed in reports. It comes from the database corresponding field and in this case, it doesn't go above 4000 ( if this is coming from database).
Any reponse would be appreciated.
Thanks & Regards.

I realize, This should have been in reports forum. Closing this thread and putting it in reports forum.
Regards.

Want to display more than 300 charcters in a column using ALV grid display

Hi Guru's,
I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
Thanks,
Radha.

Hi Paurl,
Define a work area say
wa_layout type slis_layout_alv.
then fill this work area as
wa_layout-zebra = X
wa_layout-colwidth_optimize = X.
wa_layout-max_linesize = 300.
Then in FM 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
is_layout = wa_layout
etc.
you provided this for the field which is displayed in alv grid will have more than 128 characters.
from this code i want,how it refers to particular field.
when i mentioned field catalog-OUTPUTLEN = '300'.
it is not displayed the field morethan 128 characters.
it only displays 128 characters.
please provide me clear and breif information with suitable code.
i am trying what your sending but it is not displayed more than 128 characters.
if you don't mind please spend for me some time for this and
give me clear and breif information with suitable code.
Thanks & Regards,
Radhakrishna.

How to display TEXT more than 500 char in a report as multiple lines.

Hi Friends,
i have a requirement like i should display Texts of length more than 500 Characters in a report( ALV LIST) as multiple lines
I am fetching the data Using FM READ_TEXT
the output im currently geeting with 150 Char in lenth as a single line
How we can split the text into multiple lines in a report
first i would like to know is it possible? if possible please give your valuable suggitions if not is there any alternative way to do this task.
Thanks & regards
kumar.

Hi,
This is possible but the Solution might not look Standard/Appropriate to you.
In ALV, you can have Multiple Line Output...There is a Field in the Field Catalogue..called as Row_position...this is by default 0...which means Single row/Line ALV output....You can have this Value in the Range of 0 to 3.......A ALV field with row_position 1, will be displayed in the second line for every record...i.e. you will have multiple line for a single record of ALV.
In your case......you can use this but you need to split your field in two fields.....but you may end up spliting a single word....but for that also you can design the logic of splitting the Fiel value at SPACE only......
This may work.......and Sorry if not work......

Maintenace view for fld more than 500 characters

Ho do i create a maintenance view for fld more than 500 characters? i need a maintenance view to maintain URL which is sometimes more than 500 chars.

The way SAP solves this for webservices is via a hash.
Once you have executed the service, the URL populates a mapping table and generates a unique hash value for it.
Via this hash, you can assign it to authorization fields and use it in your coding where the fields have limitations.
As a consequence this causes some confusion if you dont use F4, but it does work.
Cheers,
Julius

How do I display more than one month calendar in the day-view?

iCal has always had a nice feature that allowed me to display little, what I call, mini-month calendars while in the day-view. This allowed me to quickly jump to a day two or three (or more) months ahead (or behind) to check appointments on that day or set an appointment, without switching out of the day-view.
The mini-month was a small clickable calendar that looked something like this:
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
There was also a forward and backward arrow box [ < ][ > ] that allowed me to quickly scroll to the mini-month to find the day I wanted to click into. And, if I wanted to give it more room by adjusting the frame, I could display up to three months at a time within my day view.
Since upgrading iCal to 5.0 with the Lion upgrade, I can no longer display more than the current mini-month calendar on the day view.
This is REALLY inconvenient. Now, there is no way (that I know of) for me to stay in the day view and be able to jump ahead to a specific day two or three months out, or even to a day in the NEXT month without either going to the year view (a big waste of time) or click on the last day of the current month and then clicking the ">" day arrow to get to the next day which then shows that month's mini-calendar.
How do I display more than the current month's mini-month calendar in the day view on Lion?

Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

Categorize a table with more than 500 formulas or unique values.

How comes you can't categorize a table with more than 500 formulas or unique values? Can you change this?

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Value help has more than 500 results

Hi,
We´re running CRM 2007 Version 6.0.
I have integrated a field with a search help, that has more than 500 results. But in the search result popup only 500 results are shown. How can I provide access to the 500+ results to the enduser?
I´m creating the search help via
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'search_help'   "search help name
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap
      iv_trigger_submit           = abap_true.
Thanks for help.
Greetings,
Sven

Hi Sven Keller    ,
u r using search help that u created in se11.Goto that search help there is a drop down(Dailog Type )
in which 3 values r there.
Select -
A dailog depends on set of values or C dailog with value restriction ---as per ur need.
see help for this field by pressing F1.
regards,
hem

How to display more than 255 chars in background job with ALV Grid ????

Hi All,
I am using ALV grid with OO.
I have used call screen for ALV grid display. I have to display more than 255 characters in width. While running it, I can see the list perfectly.
But in background mode, the list is truncated after 255 chars.
Can anybody help how to send complete list(width more than 255 chars) to spool.
Thanks and Regards,
Neha

Hi SAP fan,
YES you can run the ALV report in background mode.
To run the report in background do F9 instead of F8, then give immediate and save.
Now goto Sm35 goto job overview and view the job listed
Choose the job and press the spool button. It will show the list created on the next page. When u clcik the list u can see the ALV output.
To see this the job should be in the finished status.
How to define Periodic Jobs
1.Execute transaction SM36
2.Define Job name, Job class, Target server
3.Click on 'START CONDITION' button
4.Click on 'Date/Time' button
5.Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
6.Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
7.Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
8.Click on 'Job overview' button or execute SM37 transaction.
9.Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
10.You will now see all your scheduled JOBS.
Case: 2
You can Run in Background but make sure it is alv list, not alv Grid FM. if you are uisng alv list not problem , but if you are using alv grid then you can code like this..
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
 RECEIVING e_offline = off.
 IF off IS INITIAL.
 CREATE OBJECT g_custom_container
 EXPORTING container_name = g_container.
 ENDIF.
Case: 3
if you are using OO ALV.
Just before creating the custom container check for the following condition.
Batch or Web Reporting
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT o_custcontainer
EXPORTING
container_name = lc_custcontrol
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
ENDIF.
You can see the output in Spool in transaction SP01.
Good Luck and thanks
AK

How to create a text which can support more than 500 chars ?

Hi all:
    In my interactive form, I have one text, the value inside this text is longtext, the length will be more than 500 chars.
    My problem is now , if there is more than 100 chars, there will be duplicated chars in this text.
    Can I make this text support overlap ? when the value have too many chars, it will display in next row ? is it possible ?

Hi,
The 2 points are compulsory for multiline display.
Could you please let me know the following things.
1. Is that field is wrapped by any position content subform.If this is the case, try making flow content.
2. Is there any field below the text field and the 2 fields are wrapped in position content, In this case also make the subform as flow content.
Refer the example form FP_TEST_01 in SFP transaction.Check the subform and field properties.
Make a backup before making changes.
Thanks and Regards,
Pavan Meda

Power view display more than 500 values in a field

Similar Messages

Maybe you are looking for