PowerBuilder code documentation with text search

I'm looking for a tool that can analyze our current PowerBuilder code set and allow it to be documented so it can be browsed/searched by other developers. I have a trail of PBDoc which is almost everything I need, BUT, I do not see how I can do a full text search of the generated documents. (Example: look for "test" through all the generated documentation). Perhaps PBDoc can do that and I'm not seeing it, but otherwise is there any other tool that could do this? (Note, this can't be for just one target, we have a lot of different targets that we'd want to search documentation all at once).
Thanks...

You might look at Visual Expert: http://www.visual-expert.com/
PBSearch is also quite useful: Topwiz Software - PBSearch

Similar Messages

Need sample code to do text search using boolean operators AND OR + -

I'm looking for an algorithm doing text searches in files
I need it to support AND OR + - keywords (for example "ejb AND peristence")
Does anyone knows where I cand find this kind of algorithm with the full source ?
Of course I can adapt C,C++ to Java.
In fact my target language is Serverside javascript (sorry) so I prefere rather low level solutions !
Any help will be grealy appreciated and the resulting code will be posted
here and on my website : http://www.tips4dev.com

Firstly, a little note to the technical solution: what you probably need the most is speed. I may sound strange, but personally I am convinced that if you could use system tools a naive algorithm:for i:=1 to m do
grep (word)
od; whose complexity is O(m.n), where m is the number of words to be processed and n somehow represents the cardinality of the text to-be-sought-through, so this naive algorithm would actually be in 99% of cases much faster than any implementation of the algorithm below, whose complexity is O(m+n), because the implementation of the grep routine (O(n)) would be optimized and m will be low (who queries 153 words at once?)
Anyway, you asked for an algorithm and you'll have it. It is quite elegant.
Aho, A.V. - Corasick, M.V.: Efficient String Matching - An Aid to Bibliographic Search, Communication of the ACM, 1975 (vol. 18), No. 6, pg. 333-340
[i]The task: let's have an alphabet X and a string x = d1d2...dn (d's are characters from X) and a set K = {y1, ... ym} of words, where yj = tj,1 ... tj,l(j) (t's are again characters from X).
Now we search for all <i, yp> where yp is the suffix of d1...di (occurences of the word yp in x)
(note: if you want to search for the whole words tj,1 and tj,l(j) must be blanks)
The idea of the algorithm is that we first somehow process words yp to construct a search machine and with this machine we will loop through X to search for occurrences of all the words at once.
Example:
K = {he, she, his, hers}
X = ushers
search machine M(Q - set of states, g - "step forward" function, f - "step back" function, out - reporting function):
(function g)
0 (initial state) h-> state 1 e-> state 2 r-> state 7 s-> state 8 ... for {he, hers}
state 1 i-> state 6 s-> state 7 ... for {his}
state 0 s-> state 3 h-> state 4 e-> state 5 e ... for {she, he}
And for all the characters is defined 0 x -> 0
Now, in
(function out)
state 2: report {he}
state 5: report {she, he}
state 7: report {his}
state 9: report {hers}
"Step back" function f for this particular set of word would be:
9 -> 3, 7 -> 3, 5 -> 2, 4 -> 1 otherwise the machine would return to the initial state 0
Processing of ushers will look like:
<0,0> u-stay in the state 0 <1,0> s-move to state 3 <2,3>, <3,4>, <4,5> state 5-report (he, she}, cannot move forward -> must step back (like if "he" was received) <4,2> r-move to state 8, <5,8>, <6,9>
Before we show how to construct the searching machine M (Q,g,f,out) let�s consider the algorithm how to use it:
Alg 1.begin
state:= 0;
for i = 1 to n do
//if cannot move forward, move back
while g(state, di) not defined do state:=f(state) od;
//move forward to a new state
state:=g(state, di);
//report all the words represented by the new state
for all y from out(state) do Report(i,y) od;
od
end.
Alg 2. � build of the �step forward� function g and an auxiliary function o that will be later used for the construction of outvar q:integer;
procedure Enter(T1�Tm);
begin
s:=0; j:=1;
//processing a prefix of a new word that is a prefix of an already processed word too
while j&ltm and g(s,Tj) defined do
s:=g(s,Tj); j:=j+1;
od;
while j&ltm do
q:=q+1; //a new state � global variable
define g(s,Tj) = q; //definition of a single step forward
s:=q;
j:=j+1;
od;
//the last state must be a state when at least the processed word is reported
define o(s) = [T1, � Tm];
end;
begin
q:=0; //initial state
for p:= 1 to k do Enter(yp) od;
for all d from the alphabet X do
if g(0,d) not defined then define g(0,d) = 0 fi
od
end. Alg 3. � build of the �step back� function f and the reporting function outcreate an empty queue
define f(0) = 0; out(0) = {} //an empty set � we expect words of the length 1 at least
for all d from X do
//process children of the initial state
s:=g(0,d);
if s!=0 then
define f(s) = 0; //1-character states, if we throw away the first character we return to the initial
define out(s):=o(s); //report 1-character words, if any
move s at the end of the queue
fi
od
while queue not empty do
r:= the first member of the queue; remove r from the queue;
for all d from X do //process all the children of r
if g(r,d) defined then
s:= g(r,d); //get a child of r
t:= f(r); //f(r) has already been defined
while g(t,d) not defined do t:=f(t) od;
//we found a state from which g(t,d) has sense
define f(s) = g(t,d);
define out(s) = o(s) UNION with out(f(s));
move s at the end of the queue;
fi
od
od
Processing of a query � normal forms
Until now we have solved the problem how to search for multiple words in a text at once. The algorithm returns not only not only whether a word was found or not, but also where exactly a word can be found � all the occurrences and their locations.
However, the initial task was slightly different: procession of a query like �X contains (y1 AND/OR y2 � yn)� In order to decide a question like that it might not be necessary to find all the occurrences of given words, actually not even an occurrence of all the words (e.g. word1 OR word2 is fulfilled as soon as either word1, or word2 is found).
Let�s suppose that a searching query is given in its disjunctive normal form (DNF):
A1 OR A2 OR ...Ak where each of Ax = B1 AND B2 AND ...Bkx and Byz is a statement �X contains yp�
Now, the query is successful whenever any of Ax is fulfilled.
(I don�t know how much you know about transformation of a logical formula to its disjunctive form � it is quite a famous algorithm and can be found in any textbook of logic or NP-completeness. I hope that evaluation of the formula, which is what happens in the procedure Report of the algorithm Alg. 1, is trivial.)

Complete SAP T codes.. with texts

Hai..
Can anyone throw some light on this.....
Ram Manohar

for infotype 2001/2002.
The rest of the HR Tables are as follows:
DD01L Domains
DD02L SAP tables
DD03L Table Fields
DD03T DD: Texts for fields (language dependent)
DD04L Data elements
DD04T R/3 DD: Data element texts
DD05S Foreign key fields
DD06L Pool/cluster structures
DD20L Matchcode Ids
DD24S Fields of a matchcode ID
T000    Clients
T001    Company Codes
T001E Company code-dependent address data
T001P Personnel Areas/Subareas
T012    House banks
T012K House bank accounts
T012T House bank account names
T500L Personnel Country Grouping
T500P Personnel Areas
T500T Personnel Country Groupings
T501    Employee Group
T501T Employee Group Names
T502T Marital Status Designators
T503    Employee Groups / Subgroups
T503K Employee subgroup
T503T Employee Subgroup Names
T504A Benefits - Default Values (NA)
T504B Benefit Option Texts (North America)
T504C Benefit Type (NA)
T504D Benefit Credit Group Amount
T504E Benefit Amount
T504F Benefit Costs
T508A Work Schedule Rules
T508T Texts for Employee Subgroup Groupings for Work Schedules
T510   Pay Scale Groups
T510A Pay Scale Types
T510F Assign Pay Scale > Time Unit, Currency
T510G Pay Scale Areas
T510H Payroll Constants with Regard to Time Unit
T510I Standard Working Hours
T510J Constant Valuations
T510L Levels
T510M Valuation of pay scale groups acc. to hiring date
T510N Pay Scales for Annual Salaries (NA)
T510S Time Wage Type Selection Rule
T510U Pay Scale Groups
T510Y Special Rules for Wage Type Generation
T511    Wage Types
T512R Cumulation Wage Types in Forms
T512S Texts for Cumulation Wage Types in Forms
T512T Wage Type Texts
T512W Wage Type Valuation
T512Z   Permissibility of Wage Types per Infotype
T513    Jobs
T514S Table Name Texts
T514T Field Name Texts
T51D2 Wage Type Classes
T51D3 Reduction Rules
T51D4 Cumulation Rules
T527X Organizational Units
T528B Positions - Work Centers
T528C Wage Type Catalog
T528T Position Texts
T529A Personnel Event
T529F Fast Data Entry for Events
T529T Personnel Event Texts
T52BT Texts For HR Objects
T52C0 Payroll Schemas
T52C1 Payroll Schemas
T52C2 Texts for Personnel Calculation Schemas
T52C3 Texts for Personnel Calculation Schemas
T52C5 Personnel Calculation Rules
T52CC Schema Directory
T52CD Schema Directory
T52CE Directory of Personnel Calculation Rules
T52CT Text Elements
T52CX Cross References via Generated Schemas
T52D1 Valid Processing Classes
T52D2 Valid Values for Processing Classes
T52D3 Valid Evaluation Classes
T52D4 Permitted Values for Evaluation Classes
T52D5 Wage Type Groups
T52D6 Wage Type Group Texts
T52D7 Assign Wage Types to Wage Type Groups
T52D8 Valid Processing Classes - Texts
T52D9 Valid Values for Processing Classes - Texts
T530 Reasons for Events
T530E Reasons for Changes
T530F Reasons for Changes
T530L Wage Types for Special Payments
T530T Event Reason Texts
T531 Deadline Types
T531S Deadline Type Texts
T533 Leave Types
T533T Leave Type Texts
T539A Default Wage Types for Basic Pay
T539J Base Wage Type Valuation
T539R Events for Standard Wage Maintenance
T539S Wage Types for Standard Wage Maintenance
T548 Date Types
T548S Date Conversion
T548T Date Types
T548Y Date Types
T549A Payroll Areas
T549B Company Features
T549C Decision Trees for Features (Customers)
T549D Feature Directory
T549L Date modifiers
T549M Monthly Assignment: Payroll Period
T549N Period Modifiers
T549O Text for date modifier
T549P Valid Time Units for Payroll Accounting
T549Q Payroll Periods
T549R Period Parameters
T549S Payroll date types
T549T Payroll Areas
T549M Monthly Assignment: Payroll Period
T549N Period Modifiers
T549O Text for date modifier
T549P Valid Time Units for Payroll Accounting
T549Q Payroll Periods
T549R Period Parameters
T549S Payroll date types
T549T Payroll Areas
T554S Absence and Attendance Types
T554T Absence and Attendance Texts
T554V Defaults for Absence Types
T554Y Time Constraints in HR TIME
T555A Time Types
T555B Time Type Designations
T559A Working Weeks
T559B Name of Working Week
T572F Event Texts
T572G Allowed Values for Events
T572H Event Value Texts
T582A Infotypes
T582B Infotypes Which Are Created Automatically
T582S Infotype Texts
T582V Assignment of Infotypes to Views
T582W Assigns Infotype View to Primary Infotype
T582Z Control Table for PA Time Management
T584A Checking Procedures - Infotype Assignment
T588A Transaction Codes
T588B Infotype Menus
T588C Infotype Menus/Info Groups
T588D Infogroups for Events
T588J Screen Header Definition
T588M Infotype Screen Control
T588N Screen Modification for Account Assignment Block
T588O Screen Modification for Assignment Data
T588Q Screen types for fast entry
T588R Selection Reports for Fast Data Entry
T588S Screen Types for Fast Entry
T588T Menu and Infogroup Designations
T588V Business object type
T588W Event types for infotype operations
T588X Cust. composite definition of event types for IT operations
T588Z Dynamic Events
T591A Subtype Characteristics
T591B Time Constraints for Wage Types
T591S Subtype Texts
T596F HR Subroutines
T596G Cumulation wage types
T596H _Cumulation wage type texts
T596I Calculation rule for cumulation wage types
T596U Conversion Table
T599B Report Classes
T599C Report Classes
T599D Report Categories
T599F Report Classes - Select Options
T777A Building Addresses
T777T Infotypes
T777Z Infotype Time Constraints
T778T Infotypes
T778U Subtypes
Error Messages tables
T100 Messages
T100A Message IDs for T100
T100C Control of messages by the user
T100O Assignment of message to object
T100S Configurable system messages
T100T Table T100A text
T100V Assignment of messages to tables/views
T100W Assign Messages to Work flow
T100X Error Messages: Supplements
a part from these do u want any other pls revert back
thanks
theja
pls reward points for helpful answers
Message was edited by:
        cherukuru theja

Oracle text search - special characters issue

Hi.
I'm facing a real annoying problem with text search query, and everything I've tried failed...
I have a table with a varchar column indexed by text index. The column contains special characters like '&', ',' and mainly- '-'. Since I want to disregard these special characters for searches I have created a basic lexer of type skipjoins for the column index. So now, the phrase 'aaa-bbb something'. for example, can be searched without '-', like this: 'aaabbb'. But I want to make it possible for this phrase to be searched with and without '-'. So, that when the user enters 'aaabbb' he will get the same results as when he enters 'aaa-bbb'.
In other words, This condition:
WHERE CONTAINS(column, '<query> <textquery grammar="context"> <progression><seq>'
||'aaabbb'
||'</seq></progression> </textquery> </query> ' ,1)> 2
Will return the same results as this condition:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaa-bbb'
||'</seq></progression> </textquery> </query> ' ,1)> 2
Since text query treats the '-' sign as a minus sign and searches for 'aaa' which doesn't contain 'bbb', the only way I found to fix this was to wrap the search text with {}. like this:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaa-bbb}'
||'</seq></progression> </textquery> </query> ' ,1)> 2
This all went very well, until I wanted to create a relaxation query. like this:
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaab}'
||'</seq><seq>'
||'{aaab}'
||'%</seq></progression> </textquery> </query> ' ,1)> 2
In this case, I would expect the first part of the query to return no results (since it's not the whole word) but the second part, using '%' should have returned the record of 'aaa-bbb'. It doesn't. It will only return my result if I remove the '{}' for the second part. I can't do that, because the exact same search, when containing '-', will not return the expected results when I remove the braces (the sign is treated as minus sign):
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'{aaab}'
||'</seq><seq>'
||'aaa-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2
So I now have no solution. My question is- How can I create a query that will disregard the minus sign and treat it as a regular sign, but would still handle percentage sign as a special sign. So that I could run a query like the last example and will get the results of searching the phrase 'aaa-b%'?
In short, and to simplify my question, I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}. Or, another way would be to remove the space that is added to the phrase inside the braces at the end of the word, preventing me from adding "%" at the end of the word, outside the braces.
Thanks you,
Nili

I'm looking for a way to escape all characters (not only the minus sign) except for a specific character. Kind of like 'unescaping' a specific character (the '%' sign) within braces {}What about if you apply a function like regexp_replace to escape all known "specific characters", and then unescape the particular specific character again back as e.g. in
SQL> select 'a.da-df%df*' str, replace (
                                               regexp_replace (
                                                    'a.da-df%df*',
                                                    '([[:punct:]])',
                                                    '\\\1'
                                               str2
from dual
STR         STR2
a.da-df%df* a\.da\-df%df\*
1 row selected.i.e. don't escape with curly brackets but with the backslash character.
You can then use this string in your query like in
WHERE CONTAINS(r.POI_NAME, '<query> <textquery grammar="context"> <progression><seq>'
||'aaab'
||'</seq><seq>'
||'aaa\-b'
||'%</seq></progression> </textquery> </query> ' ,1)> 2

Text search

Yet I seem not to undestand what's wrong with text searches in a VI.
I got a VI, in which there's a string constant, which is a command line in DOS style.
This string is something like "C:\Program Files\MySoftware\ABC_2_5_6.exe -f -g"
If I perform a text search in the VI for "2_5_6", nothing is found.
I tried "*2_5_6", "2_5_6*", "*2_5_6*" as well, but Labview finds nothing.
Am I missing something ?

Runawaycode
I have tried to search the same string in my LabVIEW and it works fine.
BTW which LabVIEW version are you using
If you need to search string in specific VI Then press ctrl+F then Select "Text" (Radio Button) and Input the Search text( Image below).
Also check for some options provided in Find window
=========================================
Please remember to accept a solutions and show your appreciation by giving Kudos to helpful messages...
Mangesh D.
CLAD | Project Engineer
==
VIPM, LabVIEW 8.2, 2009, 2011SP1, 2012, 2012SP1, 2013, cRIO,cDAQ, PXI, ELVIS, Multisim, Smart Camera....
Attachments:
2013-02-02_1634.png ‏57 KB

Full-Text search is not working with PDF files - SQL Server 2012 64 bit

Hi,
We are in the process of storing PDF files in SQL Server 2012 with Full-Text search capability.
I followed the steps as below and it works fine with word document but not for PDF files. I tried with PDF ifiler 11 & 9 and both are unsuccessful.
Server/DB Level Settings:
1)
Enable FileStream
2)
Install Full-Text
then restart
3)
Use [specific db]
alter
database [db name]
add
filegroup Files
contains filestream;
alter
database [db name]
add
file (
name = N'Files',
filename =
N'D:\SQL\DATA') to
filegroup [Files];
3)
Database level
Settings:
FileStream:
FileStream
Directory name:
[Set the name]
FileStream
non-transacted
Access: [set Appropriate]
3a)
Add a
datafile to DB
with filestreamdata
filetype.
4)
Share D:\SQL\DATA
directory and
add specific accounts
with read/write
access
5)
Give bulkadmin
access to those
specific accounts
at server
level
6)
From the
page (link)
download and
install the *.pdf
IFilter for
FTS. Link:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5542
7)
To the
PATH global system
variable add
path to the
catalog,
where you installed
the plugin.
Default for
this version is:
C:\Program
Files\Adobe\Adobe
PDF iFilter 9
for 64-bit
platforms\bin
8)
From the
page (link)
download a
FilterPackx64.exe
and install
it. Link:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=20109
9)
Now from
SSMS execute the following
procedures:
-sp_fulltext_service
'load_os_resources',1
-sp_fulltext_service
'verify_signature', 0
EXEC
sp_fulltext_service
'update_languages';
-- update language list
EXEC
sp_fulltext_service
'restart_all_fdhosts';
-- restart daemon
reconfigure
with override;
10)
Restart the
server
11)
select document_type,
path from
sys.fulltext_document_types
where document_type
= '.pdf'
-select
document_type,
path from sys.fulltext_document_types
where document_type
= '.docx'
12) Results are OK.
Following is my Table /Index/ catalog script:
CREATE
TABLE dbo.DocumentFilesTest
DocumentId INT
IDENTITY(1,1)
NOT NULL
PRIMARY KEY,
AddDate datetime
NOT NULL,
Name nvarchar(50)
NOT NULL,
Extension nvarchar(10)
NOT NULL,
Description nvarchar(1000)
NULL,
FileStream_Id UNIQUEIDENTIFIER
ROWGUIDCOL NOT
NULL UNIQUE DEFAULT
NEWSEQUENTIALID(),
FileSource varbinary(MAX)
FILESTREAM DEFAULT(0x)
go
--Add default add date for document
ALTER
TABLE dbo.DocumentFilesTest
ADD CONSTRAINT
DF_DocumentFilesTest_AddDate
DEFAULT sysdatetime()
FOR AddDate
EXEC
sp_fulltext_database
'enable'
GO
IF
NOT EXISTS
(SELECT
TOP 1 1 FROM sys.fulltext_catalogs
WHERE name
= 'Ducuments_Catalog_test')
BEGIN
EXEC sp_fulltext_catalog
'Ducuments_Catalog_test',
'create',
'D:\SQL\PDFBlob';
END
--EXEC sp_fulltext_catalog 'Ducuments_Catalog_test', 'drop'
DECLARE
@indexName nvarchar(255)
= (SELECT
Top 1 i.Name
from sys.indexes
i
Join sys.tables
t on
i.object_id
= t.object_id
WHERE t.Name
= 'DocumentFilesTest'
AND i.type_desc
= 'CLUSTERED')
PRINT @indexName
EXEC
sp_fulltext_table
'DocumentFilesTest',
'create',
'Ducuments_Catalog_test',
@indexName
EXEC
sp_fulltext_column
'DocumentFilesTest',
'FileSource',
'add', 0,
'Extension'
EXEC
sp_fulltext_table
'DocumentFilesTest',
'activate'
EXEC
sp_fulltext_catalog
'Ducuments_Catalog_test',
'start_full'
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
ENABLE
ALTER
FULLTEXT INDEX
ON [dbo].[DocumentFilesTest]
SET CHANGE_TRACKING
= AUTO
ALTER
FULLTEXT CATALOG
Ducuments_Catalog_test REBUILD
WITH ACCENT_SENSITIVITY=OFF;
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'pdf'
'BOL12006553.pdf'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\BOL12006553.pdf',
SINGLE_BLOB)
AS BLOB;
GO
INSERT
INTO DocumentFilesTest(Extension,
Name,
FileSource)
SELECT
'docx'
'test.docx'
* FROM
OPENROWSET(BULK
'd:\SQL\PDFBlob\test.docx',
SINGLE_BLOB)
AS Document;
GO
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'BILL')
Returns nothing. it should come from PDF file
SELECT
d.*
FROM dbo.DocumentFilesTest
d WHERE
Contains(d.FileSource,
'TEST')
Returns from word document as follows:
2           2014-06-04 10:11:41.393            test.docx docx
NULL   [BINARY Value] [Binary Value]
Any help is appreciated. Its been a long wait.
Thanks,
Vel
Vel Thavasi

Hello,
Did you check the fulltext log files for more details about the errors. If the filter isn’t working, there should be errors in the error log file.
The following thread is about similar issue, please refer to:
http://social.msdn.microsoft.com/forums/sqlserver/en-US/69535dbc-c7ef-402d-a347-d3d3e4860d72/sql-server-2008-64bit-fulltext-indexing-pdf-not-working-cant-find-ifilter
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Problem with full-text search in RH8

Hi All,
I've just upgraded from RH6 to RH8 (laptop running Windows XP SP3; RH6 still present on the computer but the RH8 setup program did not seem to have a problem with that: identified an earlier version was present, asked for its serial number, and then proceeded).
RH8 is working just fine, except for one thing: in the WebHelp output I generate, the Search tab displays: "Error: Failed to initialize database".
As a matter of fact, the generation details in RH8 output view state:
Processing Full-text-search data...
Finished processing Full-Text-Search data in 0 sec(s)
This is the case for legacy projects that RH8 upgraded from RH6, but also when I create a project from scratch in RH8.
Now, to add to my confusion, before buying RH8, I had downloaded RH8 trial version and installed it on a spare computer (so it would not interfere with my RH6 installation and projects). The tests with this version were OK (hence the decision to buy the upgrade), and guess what: there was no problem whatsoever with full-text search, neither on legacy projects nor on new projects.
So before I go into the pains of uninstalling / reinstalling (hello registry, it's me again, trying to clean things up ;-), I'd like to know if anyone has any idea why this is happening.
Just to be clear: The RH8 version I bought and installed was a new download, distinct from the initial trial download.
The 3 differences between the trial version and the current working version are:
Trial was on a Vista computer (working version is on XP SP3)
Trial did not have RH6 present on the computer
Trial was version 8.0.0.203, whereas the working version is 8.0.2.208 (immediately after it was installed, RH prompted me to install the updates)
Thanks in advance for any help or advice.

Hi All,
Just for the record, IT people here were eventually able to have RH8 full-text search feature working on my laptop by:
1/ Installing an XP virtual machine from scratch, and then installing RH8 on it (we created a small project and generated the webhelp output, just to make sure the search feature did work in that environment).
2/ Using a software virtualization application to capture that RH8 install and deploy it on my laptop.
The problem is not solved, because we still don't know what caused it (conflicting DLLs?), but it looks like we have a workaround - although certainly not a quick and easy one ;-)

Search help for OBJECT ID with Text Description for a query

I need to create search help for the field object text in HRP1000 - P1000-STEXT table in an infoset based on LDB PCH. Can anyone help me? I want it to appear on the adhoc query screen.
Thanks,

look at search help FC_RFCDEST. that problem has already been solved with this search help.

Kazehakase with full-text search in history using Hyper Estraier

A guide for Kazehakase with full-text history search using Hyper Estraier
I adopted qdbm and submitted hyperestraier in AUR, so you can enable full-text search frature by installing Hyper Estraier from AUR and rebuilding Kazehakase using srcpac or yaourt.
1. Install QDBM and Hyper Estraier from AUR. The easiest way is using yaourt. (If you prefer not to use yaourt, download tarball and do makepkg && pacman -U manually.)
yaourt -S qdbm hyperestraier
2. Rebuild Kazehakase using srcpac.
srcpac -Sb kazehakase
Of cource you can rebuild Kazehakase using yaourt.
yaourt -Sb kazehakase
You don't have to modify configure option in PKGBUILD of Kazehakase, because "--enable-hyper-estraier" is implied by default. If Hyper Estraier is installed successfully, you'll get "Hyper Estraier: yes" in configure messages.
3. Configure Kazehakase. To enable full-text search in history, run Kazehakase and go Edit>Preference>General and change UI Level to "Expert" and apply settings. Next, go Edit>Preference>History and set Search engine name to "hyper-estraier" and restart Kazehakase. Then you'll see "History Search" box next to "Internet Search" box.
Sorry for my poor English.

"ctxsrv" is no longer supported at version 10.1.
Instead PARAMETERS clause has SYNC option, and you can specify ON COMMIT for this.
If you created the database with DBCA and chose Oracle Text option, then you have no need to perform any further operations to configure Oracle Text.

Full-text search in ucm10g with wc search taskflow

hi all,
I am using wc11.1.13 plus ucm10gr3.
I checked in a content with both Primary File and Alternate File , I used webcenter search taskflow to search word in alternate file, but search result show me the Primary File, how to resolve this issue?
I also opened a case in ucm forum.
Best regards

Hi Atrsams,
According to your description, you want to implement Full Text Search in Analysis Services Cube, right? Base on my research, there is no such a functionally to achieve Full Text Search in Analysis Services currently. And it seems that there is no any
solution or workaround for it. I recommend you to submit this at
https://connect.microsoft.com/SQLServer/ So that the product team can consider to solve it in the next SQL Server version. Your feedback is valuable for us to improve our products and increase the level
of service provided.
Thanks for your understanding.
Regards,
Charlie Liao
TechNet Community Support

Code inspector with customer check : how to change the documentation ?

Dear all,
I've added a new control in code inspector with a new folder and I want to change the documentation to my new item line. Is there someone who know how to change this doc ?
Christophe

Hello Christophe,
does control mean folder or check plugin? In this case the class you have introduced holds corresponsing callback methods.
IF_CI_TEST~DISPLAY_DOCUMENTATION
A redefinition of this method and setting the according member variable in the constructor should do..
HAS_DOCUMENTATION = 'X'.
Hope this helps
Klaus

Text search with long "artificial" word

Dear All,
I have created one table which contains a clob column. The column have a content like 'atgctctgc.....atgc' (around 10M per row) as one big "word". I'd like to find the rows which contains the pattern 'atgctggcctttcact' (around 20~30 characters) in clob column. I used dbms_lob.instr and it does the work but still not fast enough. I don't know if it's possible to use the ctxsys.context index to solve the problem.
BTW, i have tried the default setting and it doesn't work. I use the following syntax:
select * from t where contains(l_clob, 'atgccacagaagaga') >0
It throws me "no data found" which i can find hits using dbms_lob.inst.
I am confused how i can solve the problem.
Regards,
lik

Hi,
I think this is a biological data sequence, am I correct? I think better to search patterns is to have a look at Regular_expressions or BLAST. Here is a presentation about both techniques: [url http://www.oracle.com/technology/industries/life_sciences/presentations/lsday903_6_2_Myriad_Sequence.ppt]Biological data search. Another one is this: [url http://www.oracle.com/technology/industries/life_sciences/pdf/twp_ls_blast_10gr1_0904.pdf]Sequence Matching and Alignment in Oracle
If you want to go on with text, you must use wildcards to find it:
select * from t where contains(l_clob, '%atgccacagaagaga%') >0 The problem is that this is not the best kind of search for a text index (both sides a wildcard). This can be sped up, but I don't think it will help you because that's intended for shorter terms/words.
Hope that the above can help you
Herald ten Dam
http://htendam.wordpress.com

Is it possible to ignore noise words conditionally in working with Full text search containstable

I have a question on stoplist file. I need to search for exact phrase string("this is the incident") which contains noise words. As part of the FT search engine, during parsing it eliminates noise word and search on remaining string in
the given phrase.
let us say there are 10 rows which contains the term "incident" in the FT table . and 1 row which has the exact phrase.i.e."this is the incident".
if we use containstable() to search for "this is the incident", we are getting 10 rows instead of 1 row.
To resolve the issue, we have 3 solutions
1.either stoplist file needs to be modified to remove the words (this,is,the)
2. set stoplist = OFF.
3.empty stoplist.
Apart from the above solutions, is there any better solution with out touching noise words file list.
If any solution that provides flexibility to ignore noise words conditionally at one time and not to ignore them.
Please provide your suggestion.
kkprasad

One question that I ask is: Why would I want to exclude noise words?
Noise words were created to limit the size of the full text indexes and avoid processing the many 'this', 'is', and 'the' common words. But the disadvantage of doing so is that you cannot find some things as you would like.
My feeling is that computers are more powerful and have more storage and it is often better to just index everything. As long as your search does not include 'the', then the large number of 'the's in the system will pretty much be ignored.
NOTE: If you change the noise words, including SET STOPLIST = OFF, you have to rebuild the index in order for it to implement your decision.
Of course, for very, very large full text indexes you would need to test.
Is your full text search on relation database columns, e.g. Description NVARCHAR(1000) or are you searching Word, Excel, and other more complex data?
If your full text is relational columns, it might be that you could:
1. Select only the fulltextkey into a temp table (e.g. #FTSfulltextkey) from the full text index using noise words. That would give you 10 rows.
2. Then directly query the table to find the string as you define above. (But remember that punctuation and symbols are generally ignored by Full Text Indexing, but would still be there in the string of text.)
SELECT *
FROM MyTextTable T
JOIN #FTSfulltextkey K
ON T.fulltextkey = k.fulltextkey
WHERE T.Description like '%this is the incident%'
Full text search is powerful, but it has limits. And the behaviour changes depending on the Language of the search.
RLF

Full text Search Issue with Boolean AND Search in 2012 server

We are trying to use CONTAINSTABLE function with BOOLEAN AND search, but unable to get expected results in sql server 2012.
If use BOOLEAN OR search we get expected results.
Full text indexed table is having more than 10 millions of records. we checked index fragmentation level is 82%. then we done Rebuild. Even after rebuild, unable to fetch expected results with AND SEARCH.
The below query is used
SELECT ft.* FROM FT_ROWS ft
INNER JOIN CONTAINSTABLE(FT_ROWS, summary,
' "manifest" AND "version" ') AS key_tbl
ON ft.log_id = key_tbl.[key]
if we remove ( "manifest" AND ) from the search string, then getting some results but AND search is not returning expected results.
Please help any suggestion
kkprasad

The explanation that is closest at hand is that you have no documents with both of these words in them.
An alternate explanation is that you have accidently entered "manitest" into your stoplist.
Erland Sommarskog, SQL Server MVP, [email protected]

Lync 2013 Clients in Child Domain Log "The server returned HTTP status code '403 (0x193)' with text 'Forbidden'."

Hey All, I am really stumped on this one.
Environment - Is using split DNS
Forest Root Domain - Contains new Lync 2013 Server Standard, ADDS, DNS, Enterprise CA, Workstations
Clients in this domain connect and work beautifully. No errors.
Child Domain - ADDS, DNS, Workstation, Lync 2013 client
Client autodiscovers, and then asks for a password. Enter the password and this comes up...
Can't sign in to Lync, You didnt get signed in, It might be your sign-in address or logon credentials.. blah blah blah"
Client log shows
Error:
There was an error communicating with the endpoint at 'https://domainlync13srv.Domain.net/WebTicket/WebTicketService.svc'.
The server returned HTTP status code '403 (0x193)' with text 'Forbidden'.
The server understood the request, but cannot fulfill it.
As far as i can tell certificates are correctly configured with all the SAN's possible in my forest. The user is correctly set up in Lync control panel. Autodiscovery seems to be working as it should. EWS is working correctly.
Repaired client, removed cached creds, has all lync 2013 updates no dice
Thank you all!

I am an IDIOT.
I did not prepare the child domain with the LYNC setup tool. Logged on to a file server in the child domain with domain admin rights and sure enough the setup said the domain was "partial". Ran the setup and bam it all started working.

PowerBuilder code documentation with text search

Similar Messages

Maybe you are looking for