Powersave and open-source ATI drivers
Hi everybody, another ATI-driver-issue here...
I have a laptop with an HD3470 graphic card. Before Xorg 1.6 I used the catalyst drivers from the main repository, and I was quite happy. After the upgrade to the new Xorg i moved to open drivers, but I have some complaints about power saving features. I hear a fan spinning at high speed (I suppose it's VGA fan), and the keyboard becomes very hot; battery life seems considerably shorter than before. According to this:
http://www.x.org/wiki/RadeonFeature
radeonhd doesn't have any power save feature implemented yet, so I installed the xf86-video-ati driver which should implement most of the Powerplay features. But I saw no big difference between radeonhd and ati.
Does anyone know if the powersaving in ati is to be enabled in some way? Or how efficient it is, compared to the closed driver?
Thanks
I've been able to install catalyst 9.5 from AUR. There's no contest: proprietary driver is king in power managment, up to now. My laptop ran damn hot with the open driver, now it is noticeably cooler. I've no data about battery life but I suppose it's increased.
It's a pity that open drivers that are so good in features completely lack power saving, which is a priority in my opinion even in desktops...
Last edited by snack (2009-05-22 20:25:04)
Similar Messages
-
X11 and open source ATI drivers
Hi. Well I have a little(big) broblem. I have ATI Radeon x1600 video card, and I need open source video drivers (not fglrx). I installed it by the article at archlinux wiki:
Open Source ATI Drivers
The open source drivers will work to some degree on Radeon chipsets up to the Radeon X850. Radeons up to the 9200 series are fully featured, stable, with full 2D and 3D acceleration. Radeons from 9500 to X850 have full 2D acceleration, the y provide 3D acceleration as well but it doesn't support all the features that the proprietary drivers do. A full list of supported chipsets can be found here.
[edit]
Installation and Configuration
The package is xf86-video-ati. Note: if you have previously installed the proprietary driver make sure to remove fglrx, fglrx-beyond, and fglrx-utils.
pacman -S xf86-video-ati libgl-dri
Edit your xorg.conf, and add or make sure you have the following in their given sections. For
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Device"
Identifier "name" # your alias
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
When using this driver, make sure you do not have fglrx-utils installed but use libgl-dri instead. Otherwise you'll have the wrong libGL.so which will cause direct rendering not to work.
So I did all this crap and i get, when i tryed to start X:
(EE) Failed to load module "glx" (module does not exist, 0)
(EE) Failed to load module "radeon" (module does not exist, 0)
My xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any help? =/I may be wrong, but I dont think the open source drivers support the X1xxx series cards.
If I am wrong, then make doubly sure you actually did install xf86-video-ati and libgl-dri. Then, maybe try starting from a fresh Xorg.conf by running this as root in the console (without X started):
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
X -configure
mv xorg.conf.new /etc/X11/xorg.conf
And see if that works, if it does, slowly build on top of it, until you have your desired result -
[Solved] Slow graphics with RS780M and open source ati driver
EDIT: Well this is embarrasing. Guess this is why there's a new comers forum. I assumed since I installed a couple days ago my system was up to date. However, running pacman -Syu updated my kernal and it works fine now. SOLVED (I'm an idiot)
Hello Arch community. I've been using Ubuntu for a couple years so know that my hardware can work well enough with linux. Almost everything works great with arch with little setup, but I'm stumped as to how to setup the graphics card.
I'm attempting to use the open source drivers, either xf86-video-ati or xf86-video-radeonhd (I don't care which I use in the end). I have both installed so I can try out both, assuming that doesn't cause problems. I've never tried using the catalyst driver in arch, so I know I don't have remenents of that causing problems. Right I have gnome working, but when dragging a window, resizing a window, scrolling, or watching a video I can see the screen slowly refresh. It is definetly not right.
Here's the information that might help:
[jake@myhost ~]$ lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
I've tried various configurations. Right now I'm running without an xorg.conf. This is /var/log/Xorg.0.log from the setup without an xorg.conf
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 23 11:58:06 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0x80000000/268435456, 0x92300000/65536, 0x92200000/1048576, I/O @ 0x00005000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 0000000092300000
(II) RADEON(0): MMIO registers at 0x0000000092300000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(WW) RADEON(0): R600 support is mostly incomplete and very experimental
(--) RADEON(0): Linear framebuffer at 0x0000000080000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x30f2
IOBaseAddress: 0x5000
Filename: BR28896C.bin
BIOS Bootup Message:
HP_QT8 RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 69300
HBlank: 135, HOverPlus: 48, HSyncWidth: 32
VBlank: 16, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-B
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 80000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 255712 kb for X Server offscreen at offset 0x00648000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Mode 1280x800 - 1415 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event13"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've also tried it with many xorg.conf files without finding any which give me the same graphics performance I have in ubuntu. Here's the one I was using, with the comments showing some other things I tried.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 60.0
VertRefresh 55.0 - 70.0
#Option "UseEdidFreqs" "1"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
#Driver "radeonhd"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
#Added optimizations
Option "AGPMode" "8"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
#Option "AccelMethod" "XAA"
#Option "EnablePageFlip" "on"
#Option "AGPFastWrite" "yes"
#Option "XAANoOffScreenPixMaps" "1"
Option "RenderAccel" "true"
Option "DRI" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
# Option "Composite" "On"
Option "Composite" "Disable"
EndSection
#Section "ServerFlags"
# Option "AIGLX" "On"
#EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Just in case this help:
[jake@myhost ~]$ modinfo radeon
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/radeon/radeon.ko
license: GPL and additional rights
description: ATI Radeon
author: Gareth Hughes, Keith Whitwell, others.
depends: drm
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: no_wb:Disable AGP writeback for scratch registers (int)
[jake@myhost ~]$ modinfo drm
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/drm.ko
license: GPL and additional rights
description: DRM shared core routines
author: Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl
depends: agpgart,i2c-core
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: debug:Enable debug output (int)
Any ideas?
Last edited by Coward (2009-06-25 06:40:51)Coward wrote:I can't see a way to mark this thread as solved or anything, but it is solved.
Just click edit on the lower right of your first post and you can edit the subject
http://bbs.archlinux.org/viewtopic.php?id=50161 -
[HOWTO] DRI with Open-Source ATI drivers
Hi, I've recently got DRI working on my ATI Radeon 9600 pro with the open source drivers so I'll try to explain you my method expecting this will be useful for you...
First, be sure you have the driver installed :
# pacman -S xf86-video-ati
And now edit your xorg.conf like this :
Section "Module"
Load "dri"
Load "glx"
EndSection
Section "Device"
Identifier "ATI Radeon 9600 Pro (RV350)"
Driver "radeon"
BusID "PCI:1:0:0"
VendorName "ATI Technologies Inc."
EndSection
And at the end of the file add :
Section "DRI"
Mode 0666
EndSection
That's all for the xorg.conf now...
Then, we have to load the needed modules at startup so in rc.conf add the modules in this order :
MODULES=(sis_agp agpgart radeon drm)
PS: I have a sis AGP chipsets you have to replace 'sis_agp' by your AGP chipset...
Now reboot your computer and lunch
glxinfo | grep 'direct rendering'
which may ouput :
direct rendering: Yes
If no, read the Xorg log file (/var/log/Xorg.0.log) and look for the lines which start whith (WW) or (EE) to found the problème...
I think all it's good run glxgears to see DRI in action and now we go to add some options to the "Device Section" in the xorg.conf :
Identifier "ATI Radeon 9600 Pro (RV350)"
Driver "radeon"
BusID "PCI:1:0:0"
VendorName "ATI Technologies Inc."
Option "AGPMode" "8"
Option "AGPFastWrite" "true"
Option "RenderAccel" "true"
Restart the X server and that's all...
Bonus : Transparency and Shadow
Edit the xorg.cong and add this lines after the Module Section :
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
Option "DAMAGE" "true"
EndSection
And this option to the Device Secton :
Option "backingstore" "true"
Restart again the X server and now you can see... NOTHING!! :shock:
So install 'xcompmgr' and 'transset' to see something :
# pacman -S xcompmgr transset
Then do
xcompmgr -c
and now you may see the shadow of the windows...
Links :
man radeon
DRI with ATi Open-Source Drivers
Xorg X11 and Transparencyhmm, it didn't help.
btw: I just remembered I had turned agpfastwrites off in my bios (reviews tell it's a bad idea to use fastwrites with a radeon 9600) So I tried to put it back on, and now X completely freezes my pc when it starts, so I've turned it back off
[offtopic]If you screw up x so it locks your pc, and x is started by default (default runlevel is 5), are the any grub parameters or something else to disable x from starting? otherwise I need a gentoo live cd to recover (the arch live cd won't detect my raid)[/offtopic]
Here a part of my xorg.log. As you can see it complains the r300 mesa driver isn't included, is that normal? I can't find how I should install it...
and the agpdmamode option is also ignored as you can see
(**) RADEON(0): RADEONScreenInit c0000000 0
(**) RADEON(0): Map: 0xc0000000, 0x08000000
(==) RADEON(0): Write-combining range (0xc0000000,0x8000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x8227a90)
(**) RADEON(0): Read: 0x00080002 0x00020020 0x00000000
(**) RADEON(0): Read: rd=2, fd=32, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x8227a90
(WW) RADEON(0): Enabling DRM support
*** Direct rendering support is highly experimental for Radeon 9500
*** and newer cards. The 3d mesa driver is not provided in this tree.
*** A very experimental (and incomplete) version is available from Mesa CVS.
*** Additional information can be found on http://r300.sourceforge.net
*** This message has been last modified on 2005-08-07.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:03:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:03:00.0
(II) RADEON(0): [drm] DRM interface version 1.2
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:03:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xe1534000
(II) RADEON(0): [drm] mapped SAREA 0xe1534000 to 0xb78a5000
(II) RADEON(0): [drm] framebuffer handle = 0xc0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f00421b [AGP 0x10de/0x01e0; Card 0x1002/0x4150]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xaf67b000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xaf67a000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xaf47a000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xaef9a000
(II) RADEON(0): [drm] register handle = 0xeb000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x08000000
(**) RADEON(0): agp_size : 0x08227968
(**) RADEON(0): agp_base : 0x08227968
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1400x1050@85 179.30 1400 1504 1656 1912 1050 1051 1054 1103 (24,32) -H +V
1400x1050@85 179.30 1400 1504 1656 1912 1050 1051 1054 1103 (24,32) -H +V
(**) RADEON(0): Pitch = 11534512 bytes (virtualX = 1400, displayWidth = 1408)
(**) RADEON(0): dc=17930, of=35860, fd=159, pd=2
(**) RADEON(0): RADEONInit returns 0x8228440
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x8228440)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xc7ffc000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x0001009f 0x00000000 (0x0000bf00)
(**) RADEON(0): Wrote: rd=12, fd=159, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 30354c4c to 204a7c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1408,8191)
(II) RADEON(0): Reserved area from (0,1050) to (1408,1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7139
(II) RADEON(0): Will use back buffer at offset 0x16b0000
(II) RADEON(0): Will use depth buffer at offset 0x1c54000
(II) RADEON(0): Will use 96256 kb for textures at offset 0x2200000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xc7ffc000 is: 0xc7ffc000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30354c4c to 204a7c7c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 176
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1052)
(II) RADEON(0): Largest offscreen area available: 1408 x 7136
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(WW) RADEON(0): Option "EnableAGPDMA" is not used
(**) RADEON(0): RADEONScreenInit finished -
[ANSWERED] Fan speed on HD4890 with open source ATI drivers?
Hi everyone.
Is it possible to control the fan speed of my HD4890 card with the opensource ATI drivers (xf86-video-ati or xf86-video-radeonhd)?
My HD4890 fan is really loud with both for no apparent reason (the temp is not THAT high). The fan is silent with the fglrx driver as well as on Windows 7.
Greets,
John
Last edited by johnrl (2010-01-24 11:44:28)Sorry to dig that out. It's possible now.
You need the xf86-video-ati-git from aur.
Add the two options in xorg.conf to your device section
Option "ForceLowPowerMode" "true"
Option "DynamicPM" "true"
If you have the git drivers installed you can check the man page for what exactly this two options do. With the xf86-video-ati my fan was always blowing at 100%, which is quite annoying especially for a laptop.
With this two options from the git driver it is better. Not as silent as on windows but much better than before.
I don't know what happens, when it gets suddenly load, from a game or something though. -
FireGL V7700 and open source Radeon drivers
I have an infuriating problem with a new FireGL V7700 video card (RV670) and the radeon drivers. Namely: they don't work. When I boot with KMS on, once the KMS comes on the screen goes black, power saving on the monitor kicks in, and the system halts (doesn't start sshd, or get IP from router). So I've not no dmesg and no logs. (ಠ_ಠ)
With KMS off (via nomodeset) it boots, but the drivers don't work because of no UMS support. (ఠ_ఠ)
I've tried many things (custom kernels, different distros, etc) but it doesn't seem to make a difference. I'd like to make this card work with the xf86-ati-video drivers. I bought it because those drivers are supposedly getting pretty good.
The infuriating thing is that the card works great in windows (ಥ_ಥ)
Thanks for any help!I do this using systemd tmpfiles
make a new .conf file in /etc/tmpfiles and enter:
w /sys/class/drm/card0/device/power_profile 0644 root root - low
I use the address under /sys/devices/, but I think both should work
make sure the tmpfiles services are also enabled -
Help with Open Source ATI Drivers
My video card: ATI Radeon X300
So I finally got the driver to work when I do startx (I think), however direct rendering doesn't work. (glxinfo | grep direct)
This is the output from glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R300 20060815 x86/MMX/SSE2 TCL
OpenGL version string: 1.2 (1.3 Mesa 6.5.2)
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multitexture, GL_ARB_texture_border_clamp,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_dot3,
GL_ARB_transpose_matrix, GL_EXT_abgr, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_lod_bias
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x23 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x25 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x26 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x27 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x29 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2a 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2b 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x2c 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x2d 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2e 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2f 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x30 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 Slow
0x31 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x32 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
By the way, I had to do startx twice. I got this error on the first time.
Is this normal behavior or did I miss something from the wiki page?
[edit]oh, and LIBGL_DEBUG=verbose glxinfo > /dev/null gives me
libGL: XF86DRIGetClientDriverName: 5.2.0 r300 (screen 0)
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri//r300_dri.so
libGL error: dlopen /usr/lib/xorg/modules/dri//r300_dri.so failed (/usr/lib/xorg/modules/dri//r300_dri.so: undefined symbol: _glapi_add_dispatch)
libGL error: unable to find driver: r300_dri.so
libGL: XF86DRIGetClientDriverName: 5.2.0 r300 (screen 0)
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri//r300_dri.so
libGL error: dlopen /usr/lib/xorg/modules/dri//r300_dri.so failed (/usr/lib/xorg/modules/dri//r300_dri.so: undefined symbol: _glapi_add_dispatch)
libGL error: unable to find driver: r300_dri.so
r300_dri.so is at /usr/lib/xorg/modules/dri/ but for some reason there is an extra '/' when it is trying to load the shared object. How can I fix that?
Last edited by NoOneImportant (2007-02-19 20:11:15)nevermind. Seems that ati-fglrx-utils wasn't removed when I installed libgl-dri.
-
Hi, I've been playing around with new open source drivers for ati r5xx series. The driver is still in early development and it currently doesn't work on my card (ATI Mobility Radeon X1400), because the driver in git contains a limited number of PCI IDs for different Radeon X1000 graphics cards. I've created a package for this driver but didn't upload it on AUR because:
1. i don't think i have enough knownledge about building packages (not yet)
2. haven't looked into what dependencies to include in the package
3. driver is still in early development with almost no use to end-user
nevertheless, i have successfuly build a package and if anybody wants to add it to AUR or build it, here it is:
pkgname=xf86-video-avivo-git
pkgver=20070620
pkgrel=1
pkgdesc="Open source ATI/AMD R5xx drivers for Xorg"
arch=('i686')
url=""
license=('GPL')
depends=('xorg-server>=1.3.0' 'libpciaccess-git') #or does libpciaccess-git go to makedepends?
makedepends=('git')
provides=()
conflicts=()
replaces=()
backup=()
install=xf86-video-avivo-git.install
source=()
noextract=()
md5sums=()
_gitroot="git://anongit.freedesktop.org/git/avivo/xf86-video-avivo"
_gitname="xf86-video-avivo"
build() {
cd $startdir/src
git clone $_gitroot
cd $_gitname
./autogen.sh --prefix=/usr/
make || return 1
make DESTDIR=$startdir/pkg install
i also had to build libacpiaccess-git to be able to build the driver:
pkgname=libpciaccess-git
pkgver=20070620
pkgrel=1
pkgdesc="Generic PCI access library"
arch=('i686')
url=""
license=('GPL')
depends=()
makedepends=('git')
provides=()
conflicts=()
replaces=()
backup=()
install=libpciaccess-git.install
source=()
noextract=()
md5sums=()
_gitroot="git://anongit.freedesktop.org/git/xorg/lib/libpciaccess"
_gitname="libpciaccess"
build() {
cd $startdir/src
git clone $_gitroot
cd $_gitname
./autogen.sh --prefix=/usr/
make || return 1
make DESTDIR=$startdir/pkg install
you can find more info on Avivo driver on this page: http://www.phoronix.com/scan.php?page=a … 753&num=1#
Last edited by billy (2007-06-20 09:57:27)This kind of sums it up, doesn't it?
http://www.userfriendly.org/cartoons/archives/99feb/19990208.html -
Open source ati driver -- garbled graphics
I'm trying to run an openGL game (Uplink-demo) with the open source ati driver, but I just get strange garbled graphics. It's not the card or the game either -- I installed opensuse 10.2 on this same box the other day and had no problems running the game. Even XGL worked surprisingly. But opensuse is a pig next to Arch though so I'm hoping for a fix Here is the result:
Help! :S
BTW, I can't run the closed source fglrx driver because my card is no longer supported (Radeon 9000, rv250 chipset). The legacy drivers ATI provides don't seem to install with Xorg 7.2.
::edit::
Here's a copy of my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "record"
Load "extmod"
Load "dri"
Load "GLcore"
Load "glx"
Load "type1"
Load "freetype"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 360 270 # mm
Identifier "Monitor0"
VendorName "VSC"
ModelName "A90f"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 86.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # <i>
#Option "AGPMode" # <i>
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # <i>
#Option "GARTSize" # <i>
#Option "RingSize" # <i>
#Option "BufferSize" # <i>
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # <i>
#Option "DepthBits" # <i>
#Option "AccelDFS" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # <i>
#Option "RageTheatreCrystal" # <i>
#Option "RageTheatreTunerPort" # <i>
#Option "RageTheatreCompositePort" # <i>
#Option "RageTheatreSVideoPort" # <i>
#Option "TunerType" # <i>
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ConstantDPI" # [<bool>]
Option "AGPMode" "4"
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV250 If [Radeon 9000]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Last edited by Plexxxy (2007-04-09 22:20:34)whompus wrote:Here are some of my settings I used with a Radeon 9000 which may be of some help.
Nope, no dice. By any chance, does this game load ok for you?
junglepenut wrote:
If you tried the fglrx package first did you reinstall libgl or is it libdri? The exact one is in the wiki something having to do with them being the same name but different internally so one is downloaded based on which driver you have...or something like that.
Also do you have the right mesa? This is am totally guessing you do have. But I received weird issues once very similar to yours when I tried to do things with out mesa...
Well, I've never installed fglrx on this box since I already knew about the incompatibility regarding ati cars older than r300. So that's taken out of the equation. Is there a different mesa? I only see one in the packages.
On a whim, I decided to try a fresh install of Arch. I installed xorg, xf86-video-ati, and gnome + extras -- I basically got the same result. So it's either something missing in my xorg config or I'm missing some gl lib. I hope. Dunno
Thanks for the replies guys! -
[SOLVED] X not recognizing open source ATI driver
Greetings all,
I have spent some time searching the forum as well as the wiki for something along the lines of what is going on with my laptop. Maybe there is something there and I am not providing the correct search criteria.
First some history and what I have done thus far.
I re-installed Arch yesterday. I had (prior to this install) KDE installed and then installed E17. I added exec ck-launch-session enlightenment_start to my .xinitrc file and when I entered startx it loaded without a hitch.
Being that this is an older laptop, I found KDE put to much strain on the CPU and decided to just run E17 solo due to it's light footprint.
So I re-installed Arch. No problem there. Installed all the required stuff like xorg mesa, hal, dbus, fam etc. I have an ATI video card in this laptop so like before, I installed "xf86-video-ati" as per the wiki.
I added exec enlightenment_start in my .xinitrc file then launched with "startx"
I do not receive any errors and E launches but the problem I have is the 1st screen does not fully load. It's scrambled so I can't do anything. I did not have this problem when I had KDE installed but I do not want to re-install KDE.
Any and all responses and guidance are most appreciated.
All the best, and have a great weekend,
Ian
Edited to add additional info: I wanted to add a couple of things that I looked at or tried.
When I run glxgears I get the following error:
[ichase@ichase~]$ glxgears
Error: couldn't open display (null)
When I looked at my /etc/X11/xorg.conf under devices I am seeing
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
If I am reading it correctly, according the the ATI Arch Wiki the Identifier should read what ever my graphics card name is and the Driver should read "Radeon"
I'm starting to think that when I installed the xf86-video-ati driver that it did not take. Maybe I should try and re-install again.
Any thoughts?
Thanks again.
Last edited by ichase (2011-03-16 16:07:54)@codeRage - I appologize for taking so long to reply. Had some personal stuff come up that kept me away from the computer.
To answer your question about the output here it is:
ichase@ichase~ $ lsmod | grep radeon
radeon 723481 1
ttm 38517 1 radeon
drm_kms_helper 21512 1 radeon
drm 131562 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 4219 1 radeon
i2c_core 15144 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_pii X4
Hopefully this tells something. I re-installed Arch and re-installed Enlightenment. I also re-installed the open source ATI driver. I was actually able to get into Enlightenment this time but I am still showing that I am running off the vesa driver and not the ATI driver.
/etc/X11/xorg.conf:
Identifier "Card0"
Driver "vesa"
VendorName "ATI Technologies Inc"
Another thing I noticed, I was able to run "glxgears" this time with this output
{ichase@ichase~}$ glxgears
225 frames in 5.0 seconds = 44.952 FPS
226 frames in 5.0 seconds = 45.018 FPS
225 frames in 5.0 seconds = 44.947 FPS
XI0: Fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0" after 8134 request (7306 known processed) with 0 events remaining
@sriracha - I have not tried removing the xorg.conf file yet. After the re-install, I did not get the error again but if I do, I will post it.
Thanks you all for the help and hope everyone is coming off a great weekend.
All the best,
Ian -
technically, what does hardcode and open source mean?
And, jasper reports and ireports, they are used for report generation in java ryt? is report generation a separate process? or is it embedded in a java app?Duplicate thread.
-
X11 and open source applications issues
I have a brand new iMac 20 w/ OS X 10.4.8/ Core Duo 2.16/ ATI X1600 w/ 256 mb vram/ 1 gb of system ram. I have been using open source systems for almost two years and would like to continue to use some of the applications which are provided for Macintosh. When attempting to install any of the X11 applications, I get a message saying that I need to have X11 installed in order to install and run the apps. I downloaded the Apple X11 1.0 installer because I did not see X11 on my system. When trying to install it, I got a message saying that it could not be installed because there is a more up to date version already installed.
So, the installers for applications such as, Open office and Gimp Shop, do not see that I actually have X11 installed and they will not install because of it. I do not know enough about OS X to work through this issue.
Any help will be greatly appreciated.
Thanks,
zeusx64I did not see another version of X11 but I did go into the installation of the optional items and did not see it listed. I am fairly well versed in using computers, so I am not a complete noob but I am fairly new to Mac itself.
I have FreeBSD experience, which in itself, gives a bit of X11 experience.
That said, I have already looked for needed packages to install, tried to install and as I said before, I recieved the message during the attempted install of X11, which said I already had a more up to date version installed.
If I have by chance missed something along the way, feel free to provide a link to the needed package.
I am open to learning all that I can and realize that we all are in a never ending process of that learning.
Thanks for the replies and I hope we can figure out what I have not on my own.
I will check my mail when I am at home after work.
Thanks again. -
ATI Contrast Control - Open Source ATI Driver
Using the open source xf86-video-ati driver, is there an easy way to change the screen contrast?
I recently switched from Ubuntu to Arch. On Ubuntu I had used the ATI proprietary driver "Catalyst". The default settings for the computer were really a strain on the eyes. However, using the Catalyst GUI to change the brightness and contrast I could get it to a nice setting. I would much prefer an open source driver to a proprietary one and even the Arch Wiki states that support for the proprietary driver has been dropped due to "dissatisfaction with the quality and speed of development". I can resort to this driver if I need to, but I'd rather not.
I've been able to get some level of brightness control by changing the /sys/class/backlight/acpi_video0/brightness, but this only gives me so much control because the value goes from 0 to 8. However, this would probably be acceptable if I could also find a way to control the contrast of the screen. Using this driver is there anyway to easily do this?
Thank you for your time!Edit: Ah... I'm guessing you're using a laptop.
Last edited by Earnestly (2012-02-13 00:56:14) -
Open source ATI driver, flash 10 slow
I'm running Arch on a Thinkpad T42:
- 1.7Ghz Pentium M
- ATI 9600 (open source driver)
- Xorg 1.6.3
Direct rendering works, and compiz works fine. My problem is with Xorg CPU usage when playing any flash movie. A youtube vid (not HD or HQ) will run in the mid to upper 90% range CPU usage resulting in some pretty choppy video.
Does that imply that I'm not getting any GPU accel on flash? If so, is there something I can do to change that? I'm using swiftfox as well.
My xorg.conf file is fairly empty -- i just added a few video tweaks:
[shane@arch-laptop ~]$ cat /etc/X11/xorg.conf
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Device"
Identifier "ati_card" # your alias
Driver "radeon"
Option "AGPMode" "4"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
#Option "EnablePageFlip" "on"
#Option "AGPFastWrite" "yes"
EndSection
Any ideas?
Last edited by krazyshane (2009-08-04 19:53:00)Oh whoops
I've run it without an xorg.conf for a while with the same problem. I just recently added some of those options to speed up compiz a bit.
Let me put it this way: I'm better off loading my Windows XP virtual machine (vbox) and playing flash in there than I am playing it on the native system, which is simply retarded. -
DLL, jar and open source...HELP!
So...having asked about various OCR programs etc on here, I thought I would just ask something that has been bugging me hugely. I realise I am a total newb, but could really do with some help.
Basically, I have this problem.
I got the Asprise OCR engine working like a treat by copying the DLL to the suggested directory and then linking the jar file to my project as suggested on here. Worked like a charm. However, Asprise OCR has an annoying trial feature that requires you to click a "No Thanks" button every time it recognizes a piece of text. Not too useful when you are trying to see how well an automated OCR app works. To buy it costs over $1000 and I simply don't have that luxury.
So I googled free OCR engines, and came up with two open-source projects, Tesseract [(http://code.google.com/p/tesseract-ocr/)|http://code.google.com/p/tesseract-ocr/] and GOCR [(http://jocr.sourceforge.net/index.html)|http://jocr.sourceforge.net/index.html] .
I posted a thread on here to ask how Tesseract might be used with Java, and was sent to their forum to ask my question again. However, over a week later, I still have no reply from them.
Tesseract seems to have a DLL but no jar, so seems to not work in the same way as Asprise at all. They talk about makefiles in their documentation etc, but as a COMPLETE NEWB I am really having trouble getting my head around this.
Basically, I think my trouble starts with the fact that I don't really understand how to use the source code to work with Java, and there really isn't much documentation on these engines.
Could someone suggest a best plan of action for me?
Thanks!
Dan
:-DMy guess is that to have these DLL's work with your program you are going to have to learn a bit of C++ and how to use the Java JNI library. To some here, this is easy to do, but for others (me), it is very difficulty. Hopefully it will be easy for you. Best of luck.
Maybe you are looking for
-
IOS7 DHCP IP address scopes being depleted
I work for a large school district in Texas. We have a large deployment of iPads (10,000+) as well, we encourge BYOD. Our district has recently updated to iOS7. We now are experiencing IP address scopes running out of IP's, 6000 per campus for studen
-
Trying partion drive on early 2008 Macbook and the Bootcamp wants me to back up HDD then run assistant then reload the HDD? I have never done the bootcamp partition and i need help. Thanks Karl
-
How / where to download CCP 1.2???
I see now the CCP 1.2 is available, yet when I login to our enterprise licensing site, I only see version 1.1. How and where can I download 1.2???
-
VLD-1111 Mapping cannot be generated due to unknown step
Hi All, Requirement : Mapping of Flat File to Oracle 9i Tables My Flat File contains : Header Record & Detail Records When I try to implement Sequences to identify parent child relationship between Header Record & detail Records I get the above error
-
Reg: CJ40 Cost Planning overall_Data transfer using BDC
Hi, Is it possible todo transfer using BDC Prog for CJ40 cost planning overall. here in period im getting table control. if anybody give me sample BDC code for this CJ40. thanks in advance. Hema Edited by: hema prabakaran on Dec 10, 2008 1:23 PM