PowerShell script doesn't appear to work as scheduled task in sharepoint 2013

PowerShell script doesn't appear to work as scheduled task in sharepoint 2013, it works as normal manual execution
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi,
To run PowerShell Script as scheduled task in SharePoint 2013, you can take the demo below for a try:
http://blogs.technet.com/b/meamcs/archive/2013/02/23/sharepoint-2013-backup-with-powershell-and-task-scheduler-for-beginners.aspx
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Similar Messages

The VAT ID we have doesn't appear to work

Hello,
I can't enter my VAT number in my Dev Center account.
I keep getting the message 'The VAT ID we have doesn’t appear to work. To update it, go here. Learn more.'.
It's also impossible for me to create a new support ticket.
Dave Claessens

Hello Dave,
If you double checked your VAT ID to make sure that it is valid then please contact
Dev Center Support for assistance with this.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

I just upgraded my Internet service to 12 MPS. It doesn't appear to work any faster than the 3MPS I had before. The AT

I just upgraded my Internet service to 12 MPS. It doesn't appear to work any faster than the 3MPS I had before. The AT&T guy said it may be the computer rather than the connection. I have an iMac intel core 2 duo, running OS 10.5.8. It has 1 GB of memory. I have plenty of memory left. Is there something I can check on the computer to see if it's capable of running faster with this new Internet upgrade?

You certainly are going to see improvements if you download big files, i.e. Apple updates, or watching trailers also at higher resolution.
You won't see much difference if you use peer to peer download.

Search suggestion not working for anonymous user in sharepoint 2013

Hi ,
Please help on this search suggestion not working for anonymous user in sharepoint 2013
shaik

You can create a search center site, and set the search center site to
allow anonymous access.
Also see this link - http://blog.mastykarz.nl/search-query-suggestions-anonymous-users-sharepoint-2013-mavention-query-suggestions/
(As this is regarding a 3rd party tool, I suggest that you direct it to the provider support.)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Temp-Contract Worker User Profile Synchronization in SharePoint 2013

Hi All,
I was wondering if anyone could provide some feedback on what is the best practice for configuring Temp or Contract worker user profile services in SharePoint 2013. We have had lot of issues within MySites when we make these types of workers AD account inactive
and then active again when they come back on projects. The user profile synchronization does not work correctly and MySites has issues loading the profile etc. Also in the same context are there best practices for Name/Title/Department changes as well.
thank you for your feedback!
AJ
Ajay Mandal

Given what you describe I assume you've created a user profile Sync connection filter to remove disabled AD accounts from the user profile sync. That's why you are running into problems. When a user is missing from the import their profile is
deleted within an hour or so, but their MySite isn't deleted for 14 days (to allow time for a manager to clean it off). If the user is reactivated within the 14 day period their old mySite is still there, but is no longer referenced by the new profile
that is created. So When the user goes to their profile it tries to create a new mySite where one already exists. It can't do that.
The same thing will happen if you delete the contractor's user account, but then recreate them in AD when they return. The only way to fix it is to make sure both the profile and mySite site collection in /Personal/ have been deleted before re-adding
an old contractor.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

IMR Doesn't Appear to Work

All,
          One machine running netscape and proxy. All requests are forwarded to
          the cluster. Two machines, one WL instance per. WL 510 SP4. All URLs
          go through NS/proxy.
          I can see the proxy round-robin the requests to the cluster, but IMR
          doesn't appear to be working. I've set the following cluster props:
          weblogic.httpd.clustering.enable=true
          weblogic.httpd.session.persistence=true
          weblogic.httpd.session.persistentStoreType=replicated
          When a user logs in on the first server, a session is created. The
          next request seems to be proxied to the second server and, since the
          session doesn't exist on the second server, my application returns a
          UserNotAuthenticatedException. If IMR was working it seems the
          original log in request that caused the session to be created would be
          replicated to the secondary server, but it's apparently not working.
          I'm obviously missing something. I'm suspicious of the NS/proxy config
          for some reason, but I haven't verified that setup yet. Any ideas are
          appreciated. Thanks!
          Jason


Jason,
          This is a doc bug.
          I will ask our docs team to correct it.
          Currently all WLS's in a cluster should be listening on the same port
          number.
          We are planning to add this feature in the next major release.
          i.e. WLS's can listen on different ports in a cluster.
          Kumar
          Jason Jonas wrote:
          > After reading the documentation, I'm confused...
          >
          > In a WL cluster all instances must listen on the same port. But in the
          > NSAPI-plugin documentation one example from the obj.conf file is:
          >
          > <Object name="si" ppath="*/servletimages/*">
          > Service fn=wl-proxy WebLogicCluster="myweblogic.com:7001,
          > yourweblogic.com:6999,theirweblogic.com:6001"
          > </Object>
          >
          > What's up? Are we supposed to list all servers in the cluster in the
          > above prop? If so, why are the ports different in the above example?
          > If not, do we just list a single member of the cluster and rely on the
          > plug-in to dynamically determine the other instances in cluster to
          > route to?
          >
          > Jason
          >
          > On Wed, 09 Aug 2000 23:16:05 GMT,
          > [email protected] (Jason Jonas) wrote:
          >
          > >All,
          > >
          > >One machine running netscape and proxy. All requests are forwarded to
          > >the cluster. Two machines, one WL instance per. WL 510 SP4. All URLs
          > >go through NS/proxy.
          > >
          > >I can see the proxy round-robin the requests to the cluster, but IMR
          > >doesn't appear to be working. I've set the following cluster props:
          > >
          > >weblogic.httpd.clustering.enable=true
          > >weblogic.httpd.session.persistence=true
          > >weblogic.httpd.session.persistentStoreType=replicated
          > >
          > >When a user logs in on the first server, a session is created. The
          > >next request seems to be proxied to the second server and, since the
          > >session doesn't exist on the second server, my application returns a
          > >UserNotAuthenticatedException. If IMR was working it seems the
          > >original log in request that caused the session to be created would be
          > >replicated to the secondary server, but it's apparently not working.
          > >
          > >I'm obviously missing something. I'm suspicious of the NS/proxy config
          > >for some reason, but I haven't verified that setup yet. Any ideas are
          > >appreciated. Thanks!
          > >
          > >Jason

SunOneDS-5.2 bind authmethod=ssl doesn't appear to work

Having set up DS-5.2 with SSL + allow user authentication + user entry with (binary) certificate + certmap.conf setup for user cert CA cert + ACI entry with bind rule set to
allow (all) (userdn = ....) and (authmethod="ssl")
client connections ARE authenticated by client certificate when passed.
However, if the client binds with bindDN=userdn in ACI, but NOT using either a certificate nor SSL connection, the associated search request is still allowed. In other words, it appears that the "authmethod=ssl" bind rule HAS NO AFFECT!? Other ACI's on the entry deny anonymous access and allow other groups without SSL.
The SunOneDS-5.2 Administration Guide states for authmethod="ssl",
SSL - The client must bind to the directory over a Secure Sockets
Layer (SSL) or Transport Layer Security (TLS) connection
but this doesn't appear to be working in forcing an SSL bind/connection.
It is also interesting to note that the client certificate is offered at the LDAP connection step and not at the LDAP bind step and that a subsequent bind appears to be necessary to properly affect a subsequent search. That is, with the above ACI bind rule, connect with certificate over SSL but bind as annonymous and the search fails. ANY connection with proper bindDN and bindPW satisfies the ACI and the search succeeds.
The intention is to FORCE SSL connections for certain subtrees where the LDAP server ALSO allows NON-SSL connections for OTHER subtrees. A secondary desire is to allow SSL + certificate authentication to provide the forced SSL connection and user binding without requiring a subsequent bindDN and bindPW.
An example of SSL + certificate connection + full user binding is:
conn=30 op=-1 msgId=-1 - SSL 128-bit RC4; client 0.9.2342.19200300.100.1.4=Personal/User SSL Certificate, CN=......., OU=......, O=...., L=...., ST=...., C=..; issuer 0.9.2342.19200300.100.1.4=localnet10 SSL only CA Certificate, CN=SSLonlyCA, OU=......., O=..., L=...., ST=..., C=..
conn=30 op=-1 msgId=-1 - SSL client bound as uid=NEngineer1,ou=People,o=..,c=..
conn=30 op=0 msgId=1 - BIND dn="uid=NEngineer1,ou=People,o=..,c=.." method=128 version=3
conn=30 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=nengineer1,ou=people,o=..,c=.."
conn=30 op=1 msgId=2 - SRCH base="o=..,c=.." scope=2 filter="(dc=.............)" attrs="dn ........."
conn=30 op=1 msgId=2 - RESULT err=0 tag=101 nentries=1 etime=

Corrected - what was needed was a bind rule, boolean change from "and" to "or":
(targetattr = "*") (version 3.0;acl "DENY all but Network Administrators access";deny (all)(groupdn != "ldap:///cn=Network Administrators,ou=Groups,o=xx,c=xx")or(authmethod!="ssl");)

HT204053 I have a just purchased my first iPod touch and i cannot transfer my music from my laptop to the iPod. The sync button doesn't appear to work. What am i doing wrong? Please help this frustrated Grandma. I am trying to keep up with technology!

I have just purchased my first iPod touch and I cannot transfer my music from my laptop. The sync button does not appear to work. What have I done wrong? I am a grandma trying to keep up with technology please help.

Connect it to your computer and restore it as a new device. Then chose what music you want to sync with it and do so just like your Touch does.

Iphoe 3g power switch doesn't appear to work

I have an older 3g. The power switch doesn't seem to work, so I can't turn it off. Nor can I re-boot it.
Neither holding the power switch nor the home and power switches together seem to have any effect.
Any ideas what to do next?
Thanks

Thanks for this. I tried it but it didn't work . I guess it's off to the menders.

Java Script Code not working properly for visios in sharepoint 2013

Hi all ,
I have few visios and I am using the visio web part to display and to redirect from one visio to other visio I am using the java script code through content editor web part .
In share point 2010 it's working fine , I was able to redirect to all the visios and code is working fine .
In share point 2013 its not the same , Its not working properly . only for the first time the code is working fine . once it goes to next visio the code stops working .
For example if i click in visio A it gets redirect to Visio B and its stops working , it wont allow to do any other steps .
I have checked with the URL its correct , I am not able to find any error also .
Indresh

This will be likely caused by the Minimal Download Strategy not registering the Javascript on the page reload. You can turn off the MDS feature to test this.
You can either turn off MDS in your site, or register your Javascript functions with MDS to ensure they are called. To do this, you'll need all of your code to be wrapped in a javascript file (Embed this on the page using a <script> tag and
inside that file in a function, which you then register with MDS as follows (I usually do this in the first line of the javascript file):-
RegisterModuleInit("/SiteAssets/YourJavaScriptFile.js", NameOfYourFunction);
Regards
Paul.
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Find and item Search not working inside custom list in sharepoint 2013

HI,
In Sharepoint 2013 , i configured the Search. it is working in home page search Box and Find item search box inside custom list as well But one particualr custom list Find an item is not working. Any clue ?Thanks in Advance
Thanks
sanjay pradhan

Hi,
According to your description, my understanding is “find an item” search box in a custom list not work in your environment.
As search box and “find an item” search box in your home page are working, so the search service application is working.
Do you have any customzation to the particular custom list ?
If No, I suggest you can full crawl the data in Central Administration ->Manage Service Application->” Search Service Application”-> Manage Content Sources” to test if it works.
Also, please check if you have set "Allow items from this list to appear in search results" in list settings->Advanced Setting to true
Best Regards
Jerry Guo
TechNet Community Support

MDX not working in Power View on sharepoint 2013

I have this MDX statement below that should be able to dynamically give me a % of total for any dimension. IN power View (sharepoint 2013)
I am getting an error. It works in Excel and works in the AS browser but will not seem to work in power view. Any ideas on how to rewrite it so that it may work. I am surprised I cannot find anything on this online about this issue.
When you highlight the "#ERROR!" in Power view it gives a long description of
"The Axis Function was indirectly referenced from the context of a statement other than SELECT. Evaluations of Expressions involving this function succeed only
when indirectly triggered by a SELECT statement".
CREATEMEMBERCURRENTCUBE.MEASURES.[Percent
of Total] AS
//Used to get % from total
IIF([Measures].[Total Count] = 0,
NULL,
IIF(isempty( ([Measures].[Total Count],
Axis(1)(0)(Axis(1)(0).Count-
1).Dimension.CurrentMember.Parent
)), 1,
[Measures].[Total Count] / ([Measures].[Total Count],
Axis(1)(0)(
Axis(1)(0).Count-
1 ).Dimension.CurrentMember.Parent))),
FORMAT_STRING="#,##0.00
%;-#,##0.00 %";

Hey Mike, Thank you very much for the answer. Just need a little more help please???
I have added two separate MDX statements that should get the individual % for these two separate dimensions.
1. First does it look correct from what your saying individually. Would you write it different?
2. Next can you show me the MDX that would combine them into 1 measure. Once I can see how these two get combined into 1 measure I should be able to do this for the rest of the dimensions.
3. Will Power View ever allow Axis function? Just seems strange that it works in Excel Pivot but not in Power View.
WITH MEMBER [Measures].[Percent] AS
Case
// Test to avoid division by zero.
When IsEmpty ([Measures].[Total Count]) Then Null
// Test for current coordinate being on the (All) member.
When [Status].[Status Name].CurrentMember.Level Is [Status].[Status Name].[(All)] Then 1
Else ( [Status].[Status Name].CurrentMember, [Measures].[Total Count] )
/ ( [Status].[Status Name].CurrentMember.Parent, [Measures].[Total Count] )
End
, FORMAT_STRING ="#,##0.00 %;-#,##0.00 %"
SELECT
{ [Measures].[Total Count],[Measures].[Percent] } ON COLUMNS,
{ [Status].[Status Name].[Status Name]} ON ROWS
FROM [Report]
WITH MEMBER [Measures].[Percent2] AS
Case
// Test to avoid division by zero.
When IsEmpty ([Measures].[Total Count]) Then Null
// Test for current coordinate being on the (All) member.
When [Order Placed Date].[Order Placed Date].CurrentMember.Level Is [Order Placed Date].[Order Placed Date].[(All)] Then 1
Else ( [Order Placed Date].[Order Placed Date].CurrentMember, [Measures].[Total Count] )
/ ( [Order Placed Date].[Order Placed Date].CurrentMember.Parent, [Measures].[Total Count] )
End
, FORMAT_STRING ="#,##0.00 %;-#,##0.00 %"
SELECT
{ [Measures].[Total Count],[Measures].[Percent2] } ON COLUMNS,
{ [Order Placed Date].[Order Placed Date].[Order Placed Year]} ON ROWS
FROM [Report]

Help...Mass storage doesn't appear to work

Hi,
Just recently updated my 8900 last night where it asked to do a back-up and then did what it needed to do. didn't appear to be a problem.. until I hooked it up today.
To make a long story short.. Now when I hook it up to my USB I am no longer prompted to go into Mass storage Mode...Which is what I want...cause now it doesn't allow me to transfer files from my PC using file explorer like it use to.
My mass storage settings appear to be alright, I tried disabling it and enabling a couple times with no change.
Any advice out there on how to fix this?
Thank you.

Hello,
I am having something of the same problem. About two months ago my phone started to mess up (changing call profiles on it's own, going crazy on re-notifying (?) facebook and email notifications, etc) So I took it into Vodafone (my carrier) and they tried to just update the software, but it wasn't connecting properly, so it was sent away for repairs. It came back and all things seem to be a go - a few changes like the way the icons look on the main screen and that the lock button on top of the phone only locks the keyboard and not the whole phone anymore are not a problem, but the biggest is that I really can't connect to mass storage.
I have media card support: on
Mass Storage Mode Support: On
Auto Enable Mass Storage Mode when connected: prompt
I followed all the advice from this post: http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/HOWTO-use-your-blackberry-as-a-US...
And still nothing is working. I have just had the phone connected to the computer for a while and was charging when all of a sudden I got a message saying that because of a problem with the USB hub, my settings on the computer, etc, it couldn't charge.
Could this be a problem related to the software updates that were done when I sent the computer away for repairs? Any ideas for how to get it to work again?
Thanks,

SBS2011 (Exchange 2010 SP2) - limiting cache size doesn't appear to work

Hi All,
Hoping for some clarification here, or extra input at least. I know there are other posts about this topic such as
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/5acb6e29-13b3-4e70-95d9-1a62fc9304ac but these have been
incorrectly marked as answer in my opinion.
To recap the issue. The Exchange 2010 store.exe process uses a lot of memory. So much in fact it has a negative performance impact on the server (sluggish access to the desktop etc). You can argue about this all day - it's by design
and shouldn't be messed with etc but the bottom line is that it does use too much memory and it does need tweaked. I know this because if you simply restart the Information Store process (or reboot the server) it frees up the memory and the performance
returns (until its cache is fully rebuilt that is). I have verified this on 4 different fresh builds of SBS2011 over the last 6 months. (all on servers with 16GB RAM)
I have scoured the internet for information on limiting how much memory exchange uses to cache the information store and most articles point back to the same two articles (http://eightwone.com/2011/04/06/limiting-exchange-2010-sp1-database-cache/
and
http://eightwone.com/2010/03/25/limiting-exchange-2010-database-cache) that deal with exchange 2010 and exchange 2010 SP1, notably not exchange 2010 SP2. Ergo most articles are out of date since exchange 2010 SP2 has been released since these articles
were posted.
When testing with our own in house SBS2011 server (with exchange 2010 SP2) I have found that specifying the min, max and cache sizes in ADSIEDIT has varying results that are not in line with the results documented in the articles I mentioned above.
I suspect the behaviour of these settings has changed with the release of exchange 2010 SP2 (as it did between the initial release and SP1).
Specifically here's what I have found using ADSIEDIT;
If you set the msExchESEParamCacheSize to a value - it doesn't have any effect.
If you set the msExchESEParamCacheSizeMax to a value - it doesn't have any effect.
If you set the msExchESEParamCacheSizeMin to a value - it always locks the store.exe process to using exactly this value.
I have also tested using combinations of these settings with the result that the size and max size values are always ignored (and the store.exe process uses the maximum available amount of memory - thus causing the performance degradation) but as soon as
you specify the min value it locks it to this value and it doesn't change.
As a temporary solution on our in-house SBS2011 I have set the min value to 4GB and it appears to be running fine (only 15 mailboxes though).
Anyone got some input on this ? thank you for your time.

I concur with Erin. I'm seeing the same behaviour across all SBS2011 boxes, whether running SP1, SP2 or SP3.
If a minimum value is set, the store cache size barely rises above the minumum. I have one server with 32GB RAM. Store.exe was using 20GB of RAM, plus all the other Exchange services which total 4GB+. That left virtually no free RAM and trying to do
anything else on the server was sluggish at best.
All the advise is that setting a maximum alone has no effect and a minimum must be set too. But when set, the store cache size barely rises above the minimum. I have set a 4GB minimum and 16GB max, but 5 days later it's still using only slightly more than
4GB and there's 8GB free. Now the server as a whole is responsive, but doing anything with Exchange is sluggish.
Just saying leave Exchange to manage itself is not an answer. The clue is in the name - Small Business Server. It's not Exchange Only Server - there are other tasks an SBS must handle so leaving Exchange to run rampant is not an option. Besides, there are
allegedly means to manage the Exchange cache size - they just don't apparently work!
I'm guessing nobody has an answer to this so the only solution is to effectively fix the cache size to a sensible value by setting min and max to the same value.
Adam@Regis IT

My numlock key doesn't appear to work.

i brought home a microsoft comfort curve 2000 keyboard from work; i thought i'd try it out with my macbook. some of the special keys (volume, mute) work fine but the numlock key doesn't toggle the numeric keypad. it's stuck in numeric mode and the light isn't on.
any ideas?
macbook Mac OS X (10.4.8)

contrary to expectations, i found intellitype 6.0 on microsoft's web site and i have installed it.
now all of the non-standard keys work but numlock still doesn't work. it makes the unhappy key sound.
macbook Mac OS X (10.4.6)

PowerShell script doesn't appear to work as scheduled task in sharepoint 2013

Similar Messages

Maybe you are looking for