Powershell script not running in the task scheduler...

I've created a .ps1 script to transfer a file using WinSCP can run it in the ISE environment, in the PS window, and with the run command. I've transferred the command I used in the run prompt to the task scheduler but it is not running. It is running everywhere
else just not in the scheduler. It says that it completes okay and gives a return code of OpCode=2
The action is set to run this: c:\Windows\System32\WindowsPowerShell\v1.0\Powershell.exe
The Arguments: -ExecutionPolicy Bypass -file "C:\Users\me\scriptsWCP\FileTransferPS.ps1"
Also have it running with the highest permission and as SYSTEM

Hi,
To run a powershell script with parameters in the Task Scheduler:
Program: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add argument (optional): -Command "& c:\scripts\test.ps1 -par1 2 -par2 3"
Hope the below two articles be helpful for you:
Schedule PowerShell Scripts that Require Input Values
https://blogs.technet.com/b/heyscriptingguy/archive/2011/01/12/schedule-powershell-scripts-that-require-input-values.aspx
How to Schedule a PowerShell Script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Yan Li
Regards, Yan Li

Similar Messages

What is the best way to run a powershell script with parameters in the Task Scheduler?

Hello,
Want to run the following from a scheduled task in the Task Scheduler on a server. What is the best approach?
.\pscript.ps1 -csvfile "\\Srv1\Share\File.txt"
Thanks for your help! SdeDot

Hi,
To run a powershell script with parameters in the Task Scheduler:
Program: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Add argument (optional): -Command "& c:\scripts\test.ps1 -par1 2 -par2 3"
Hope the below two articles be helpful for you:
Schedule PowerShell Scripts that Require Input Values
https://blogs.technet.com/b/heyscriptingguy/archive/2011/01/12/schedule-powershell-scripts-that-require-input-values.aspx
How to Schedule a PowerShell Script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Yan Li
Regards, Yan Li

Firefox will not open, it is not running in the task manager, but when I click on the icon, it will not open a firefox screen.

I have tried uninstalling the program, so that i could re-install it, but during the uninstall it says i have to close the currently open firefox page, But there is no page opne. There is no page in the lower left corer of my screen, and when i opne task manger, it does not say that firefox is running. I have tried updateing firefox on the website, but during the update it says the same thing, that firefox is running, and i need to close it. I can not get firefox to opne, and i hate using internet explorer, PLEASE HELP!!

In the Task Manager, make sure to check both the Applications tab and the Processes tab. On the Processes tab, Firefox may have two different components running: firefox.exe and plugin-container.exe. Well, in 3.5.11, it would be only the first one.

Workflow does not start when PowerShell Script is run from Task Scheduler

I have a PS script that updates an item in a SP2010 list so that a workflow will be started. When I run the PS script manually from the PS window on the server it resides, the script runs flawlessly. If I set a scheduled task on the same server
to run the script with the same credentials as are being used in the PS window, the script runs, updated the info on the list, but DOES NOT start the workflow. As we know, SPD workflows cannot be started by anonymous or system accounts. It is as
if the task scheduler adds a bit of information that makes the SP2010 list think the information was updated by one of these accounts even though the field in the list for the item being updated shows the correct account.
HELP!!!
D

Hi,
The issue might be related to the script or schedule task settings your configured. You’d better check the settings.
For example, which option do you set to run the scheduled task? You may select “Run whether user is logged on or not” instead of “run only when user is logged on” as shown in this article:
http://blog.pointbeyond.com/2010/04/23/run-powershell-script-using-windows-server-2008-task-scheduler/
Hope it helps.
Best Regards,
Sally Tang

Firefox is taking a long time to open. When it does open, I get a pop up box with "Script not running". Bookmarks on my tool bar don't load. Scrolling is unreliable--it will stop in the middle of a page

What is causing the "script not running"? Why so long to open? Etc.

Hi Donekes,
First off I need a little more information to help with troubleshooting. You say that an error occurs when you "try to re-open the same problem app before the old session completely exits". Does the error have an error code or dialog display? It may also be possible to receive an error log. Here is a knowledge base that explains how to retrieve error logs.
http://digital.ni.com/public.nsf/websearch/54E361E3FF477EC186256C320068184F?OpenDocument
If you are able to get that information then please post. Have a good day.
Brian K.

Sometimes Firefox will not open, telling me, it is already running. It does not show in the task manager and the only solution is to reboot.

Firefox is running. I close the program. I try to reopen it. I get an error message: Firefox is already running. It does not show in the task manager, nor anywhere else. I can not close the old version, nor start a new one. I have to reboot.

Did you look in the Processes tab in the Task Manager?
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Script doesn't work in task scheduler

I know it has already posted many times but I have already tried everything and still I can't get it to work.
The script is a simple send email function and it works if executed from the command prompt:
powershell.exe -f .\sendEmail.ps1 [email protected] "Test Subject" "Test Message"
But in the task scheduler it doesn't work and no email is sent. The exit code of the task is 0xFFFD0000:
Task Scheduler successfully completed task "\SendEmailTest" , instance "{15ff2070-ee25-4b2e-9ae1-274eda0d8c3a}" , action "powershell.exe" with return code 4294770688.
The task is configured to run under the SYSTEM account with highest privilege, powershell ist configured with unrestricted execution policy, why it doesn't work?
I have tried also with a simpler task to create a text file
New-Item c:\scripts\new_file.txt -type file -force -value "This is text added to the file"
But it doesn't work too, so it should be some other missing privilege somewhere but I couldn't find anything in internet.
Thanks for any help

I found another possible issue while looking at a similar problem. I was unable to execute a PowerShell script as a Task Scheduler action, even though the script ran correctly when logged into Windows as the target user and running within PowerShell.
Task Scheduler would consistently display the 0xFFFD0000 error when I nominated the script in the task's action arguments using what I believed to be normal PowerShell quoting rules:
-ExecutionPolicy Bypass -File 'D:\full path\to\script.ps1'
PowerShell acquiesced and Task Scheduler fired off the task immediately and without issue when I changed the quotes I used from single to double:
-ExecutionPolicy Bypass -File "D:\full path\to\script.ps1"
Dropping to a command prompt and executing the full command immediately revealed the problem:
D:\>C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -ExecutionPolicy Bypass -File 'D:\full path\to\script.ps1'Processing -File ''D:\full path\to' failed: The given path's format is not supported. Specify a valid path for the -File parameter.
Notice the strange use of two single quotes before the path and one single quote after.
The moral of the story: When feeding the full path of a script to PowerShell as a command line parameter,
use double quotes!

Looking for a Powershell Script which can put the scom servers in maintenance mode

Looking for a Powershell Script which can put the scom servers in maintenance mode so that SCOM should not send an alert during planned task.
Rahul

1. Provide list of servers line-by-line in C:\ServerList.txt, make sure you provide limited no. of servers, do not exceed 20 - 25 per batch
2. Save the script with suitable name (test.ps1)
3. Open PowerShell cmd prompt
4. Script accepts 3 params - TimeInMinutes, Reason and Comment
**** Please note, this script will work for SCOM 2012 R2
param([int32]$TimeMin, [string]$Reason, [string]$Comment)
try
$api = new-object -comObject 'MOM.ScriptAPI'
Import-Module operationsmanager
New-SCOMManagementGroupConnection
$Servers = Get-Content "C:\ServerList.txt"
$Time = (Get-Date).Addminutes($TimeMin)
Foreach ($Server in $Servers)
#Get Computer instance
$ComputerClass = Get-SCOMClass -Name Microsoft.Windows.Computer
$ComputerClassInstance = Get-SCOMClassInstance -Class $ComputerClass | Where {$_.DisplayName -eq $Server}
If ($ComputerClassInstance -ne $Null)
$HealthServiceWatcherClass = Get-SCOMClass -name:Microsoft.SystemCenter.HealthServiceWatcher
#Get Health Service Watcher Class instance of the server
$HSWClass = Get-SCOMClass -Name Microsoft.SystemCenter.HealthServiceWatcher
$HSWClassIns = Get-SCOMClassInstance -Class $HSWClass | Where {$_.DisplayName -eq $Server}
#Starting the maintenance mode
Start-SCOMMaintenanceMode -Instance $HSWClassIns -EndTime $Time -Reason $Reason -Comment $Comment
Start-SCOMMaintenanceMode -Instance $ComputerClassInstance -EndTime $Time -Reason $Reason -Comment $Comment
Write-Host "Health Service Watcher and Agent server "$Server " kept in maintenance mode" -foregroundcolor "green"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 200, 0, "$Server kept in maintenance mode for $TimeMin minutes")
Else
Write-Host $Server" not found " -foregroundcolor "red"
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, "$Server could not be found in domain")
Catch [system.exception]
$api.LogScriptEvent('MaintenanceModeScript.ps1', 201, 1, $_.Exception.Message)
Faizan

JFileChooser() not working with windows task scheduler

I have a program that would send emails with attachments to users. The program should be ran according to the scheduled time, and because of that I use task scheduler to do it for me. I did all necessary steps to make this happen. (create .bat file to activate/run the jar file then task scheduler will trigger the .bat file if it hits the stated schedule.) The problem right now is that when the program is ran or is triggered by task scheduler, it gives off this error:
java.lang.NullPointerException
at sun.awt.shell.Win32ShellFolder2$1.call(Unknown Source)
at sun.awt.shell.Win32ShellFolder2$1.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at sun.awt.shell.Win32ShellFolderManager2$ComInvoker$3.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)I tried running it manually by using the .bat file and it works fine with no errors or whatsoever. I'm suspecting it has something to do with jFileChooser() because It wont retrieve the attachments in the default directory, but I'm not sure, there might be other causes. Here's the function that retrieves the attachments in the default directory:
public String getMyDocument(String filename)
     JFileChooser fr = new JFileChooser();
     FileSystemView fw = fr.getFileSystemView();
     return fw.getDefaultDirectory().toString()+"\\"+filename+".xls";
}PS.
All required attachments are present in the default directory, no misspelled words or misplaced characters. I also did some research but so far i haven't found any solutions yet.

gimbal2 wrote:
sabre150 wrote:{quoteStrange code anyway to use a filechooser to get a directory, especially when apparently no actual GUI is created. My immediate thought when I saw the code. I'm not even sure there is a default directory if the component is not realized but I have never checked. I would like to suggest to the OP that he uses the "user.home" directory but again I have never checked where that points when used with the task scheduler. It could be that it is not defined and that file chooser uses this as the default if not explicitly set. This is why I suggest that the OP writes out the value.

HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

How to make sure that after browsing that the webpage is not running in the background, but totally closed down

Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

Firefox has spontaneously decided not to show the task bar at the bottom of the screen, and some menu bars have been messed up. How can I fix this?

My Firefox has spontaneously (apparently) decided not to show the task bar at the bottom of the screen (the margin is there, but it is blank), and some menu bars have been messed up. Perhaps the most annoying aspect of these changes is the fact that I have to use alt-tab to move from a Firefox session to another session.
I can find no way to fix these problems. Can you help? Am I going to have to uninstall and re-install Firefox in order to get back to the default settings? If so, is there any way to preserve my bookmarks?

Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: command+Shift+F).<br />
If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
*https://support.mozilla.org/kb/how-to-use-full-screen
See also:
*http://kb.mozillazine.org/Corrupt_localstore.rdf
*https://support.mozilla.org/kb/Toolbar+keeps+resetting

GPO Startup/Shutdown scripts not running

I am running server 2003 SBS with windows 8.1 Pro workstations.
My workstations run 1 start-up script and 2 shutdown scripts. All are BAT files.
They were all working fine last week before I ran the update for 8.1.1, now they do not run at the appropriate time on any of those systems. However, if I execute them manually they work as expected.
I have checked to see if the BAT files are still located in the GPO and they are there. They are stored locally on each machine, I have even tried to delete and re-add them and then run GPUPDATE to no avail.
Any help here would be great, as they deal with local encrypted containers and are specific to each workstation.

Hi Sebastian,
Thanks for posting.
Whether the GPO with start-up/shutdown scripts are linked to the OU containing computers?
FYI - Logon/Logoff scripts could only be applied to users, whereas Start-up/Shutdown scripts applies to computers.
Also, checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b193e8a9-9b2a-4993-bd74-836c65c51dc3/gpo-with-a-startup-script-is-not-working
Regards,
Gopi
www.jijitechnologies.com

WMI Scripts not Running Across VPN

Hi
I have a strange problem where i have 2 sites connected using a VPN on 2 CISCO877. But WMI scripts are not running across the link. if i pull these out an replace them with a Draytek, the scripts run fine.
Broad Lane LAN ----- Cisco 877 ========= Internet & VPN Tunnel ============== Cisco 877 ---- Southam LAN1.0.39.0/8 1.0.39.253 192.168.55.1 192.168.55.0/24 The server at Broad Lane is GIMILI (1.0.39.109) and at Southam is FRODO (192.168.55.4). The following will not work through the tunnel from Broad Lane LAN. Set objWMIService = GetObject("winmgmts:\\192.168.55.4\root\cimv2") if err.number=0 then serverexist=true else serverexist=falsemsgbox(server.exist)
Is is possible for the CISCO877 to block WMI traffic?
Any suggestions please?
Rgds
Phil

Phil,
Thank you for your question. This community is for Cisco Small Business products and your question is in reference to a Cisco Elite/Classic product. Please post your question in the Cisco NetPro forums located here: http://forums.cisco.com/eforum/servlet/NetProf?page=main This forum has subject matter experts on Cisco Elite/Classic products that may be able to answer your question.
Bill

The Oracle BI server is not running. The repositiry had to be closed

Hi guys,
I have a OBI Standard Edition 10.1.3.4.1.
I have modify the rpd and if I try to "Check In Changes", the error appears: "The Oracle BI server is not running. The repositiry had to be closed".
In the nQServer.log this error appears:
[nQSError: 12002] Socket communication error at call=recv: (Number=10055) An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.
Why?
The problem persist if I restart the services.
The problem only occurs if I make a change in the Business Model Layer. The changes in the Physical Layer do not generate errors.
Thank you,
Sara

Hi Sara,
Can you please let us know, if there are any other messages in the NQServer.out.log ? I just googled around with this code to hit at the following link : http://www.bookmark-master.com/socket-error-10055.html
Socket error (#10055): No buffer space available.
Analyse & Solutions:
An operation on a socket or pipe was not performed because the system lacked sufficient buffer space or because a queue was full. This error indicates a shortage of resources on your system. It can occur if you're trying to run too many applications (of any kind) simultaneously on your machine. If this tends to occur after running certain applications for a while, it might be a symptom of an application that doesn't return system resources (like memory) properly. It may also indicate you are not closing the applications properly. If it persists, exit Windows or reboot your machine to remedy the problem.
From the above information, I understand that this is a system resource issue. Can you please recheck if your system has got enough resources?
Hope this helps.
Thank you,
Dhar

I was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

i was going to upgrade from 10.6.8 to mavericks 10.9.2, but the installer program notified me stating my appleworks 6 app will not run on the new set up. is there a procedure to keep or switch my documents in order to obtain the mavericks upgrade?

I can't say personally since I never used AW, but see if these articles help:
http://www.macworld.com/article/1166370/open_old_docs.html
http://www.cultofmac.com/248546/convert-system-os-9-appleworks-6-files-to-os-x-p ages-files-os-x-tips/
I suggest that you clone your current drive with 10.6.8 to an external drive. If you have any issues after upgrading to Mavericks, you can boot back into 10.6.8.
Both of these applications can be used to create a clone. If you need help creating your clone, let us know.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

Powershell script not running in the task scheduler...

Similar Messages

Maybe you are looking for