Poweshell command to pull the CNames out of list of Host name.

Hi shiva,
Please try below commands and let me know
Get All the records:
Get-DnsServerResourceRecord -ZoneName abc.com -ComputerName
server001
Get all the records of specific type (A, AAAA, CNAME)
Get-DnsServerResourceRecord -ZoneName abc.com -ComputerName
server001 -RRType A
Get-DnsServerResourceRecord -ZoneName abc.com -ComputerName
server001 -RRType CNAME
Get-DnsServerResourceRecord -ZoneName abc.com -ComputerName
server001 -RRType AAAA
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

Hi AnnaWY,
Thank you so much,
Just wanted to know,if have tried any PS cmd liner, which provides us CNames of the ip addresses.
we have IPlists.txt we require output as CNames.
Regards,
Raj
[email protected]
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

Similar Messages

I forget to charge my MacBook Pro and it turns off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. Sometimes pulling the Battery out fixes it

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

I forget to charge my MacBook Pro and it turned off because of that. Now it wont automatically connect to saved networks. I have to put in manually to make it work. Even after restating still the same. If I close the lid it looses conection. Sometimes pulling the Battery out will fixes it untill we forget to chage it.
Mac OS X version 10.6.8

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

I accidently pulled the cable out when syncing. Now my ipod automatically restarts after a few seconds. What do I do?

Please help
I accidently pulled the cable out when syncing. Now my ipod automatically restarts. What do i do?

OK, in that case a restore should fix things:
Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected an iPod in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.

Mini mac will not register my digital camera. It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.

It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.

Have you downloaded everything that is on the camera? If so format the SD card on the camera (will erase everything on the card).
If you have not downloaded everything can you see stuff on the camera? If you have a card reader you could try putting the SD card in that and trying on the mini. If your mini has a SD card slot you could try that.
In any case format the card on the camera before taking more pics.
Next time be sure to eject the camera from the Mac properly and turn the camera off before disconnecting.
EDIT: You might also check the camera's USB Mode is set to PC.

Synch wont work - Dad pulled the cable out

My Dad pulled the cable out when I was synching my iPod touch with iTunes. I can no longer do a complete synch - only 29 songs out of 540 songs are on my iPod Touch now. I get an error message when I try to synch and upload the rest of my library. The error message reads "Attempting to copy to the disk Jack's iPod failed. The disk could not be read from or written to". Can anyone help solve this?

Sounds like that upgrade (The 2.02) is for your iPod itself. It's a free update, however, if you had purchased the 2.0 upgrade. I'd try updating your iPod software, trying a different USB port on your computer, or event trying to restore the iPod on a different computer.
Hope this helped! Good luck!
Becca

Local node not included in the list of host names for grid installation

I'm attempting to install clusterware on Solaris 11 on 2 nodes. I've tried tweaking the /etc/hosts file in a few different ways by including the fully-qualified name and without it for the localhost, but it still gives me this error every time. The runcluvfy.sh script doesn't run on Solaris 11. Does anyone know how to get around this problem?
I've tried this using the silent install and with OUI, but got the same error both ways. This is the format of the node names:
oracle.install.crs.config.clusterNodes=myLocalNode:myLocalNode-vip1,myOtherNode:myOtherNode-vip2
[FATAL] [INS-40907] Local node not included in the list of host names for grid installation.
CAUSE: The local node (the node where you are running the installer) was missing from the list of host names you provided.
ACTION: Include the local node in the list of host names for grid installation.
Edited by: 982828 on Jan 18, 2013 1:18 PM

Hi,
what Oracle Version are you trying to install?
Best to directly start with 11.2.0.3 and look in MOS for certification, hints requirements.
Regards
Sebastian

I bought MACkeeper and used it to cleanup my computer. I have a Imac intel, When I didi this it deleted all my files. I tried to do a time machince. and it didn't work. so I pulled the files out of trash and my computer still isn't runing right.

I bought MacKeeper to help make my Imac intel faster. Insted it deleted all my files.
I tried to recover using time Machine, and it didn't recover back to yesterday. So I started to pull
the files and Applications out of trash. This just got me lipping along. It ran slower and would get
the spining wheel of death. I finaly gave in and thought I would reinstall Lion and everything would be
great. Well wrong, I seem to be starting fine, but all my files are gone. When I go in to time Machine
I see a device drive name (xxx). I go in that device and all my files are there. how do I pull them to the new
install of Lion? So I can be happy again. Thank you for all your time and help.

Do not install MacKeeper:
https://discussions.apple.com/docs/DOC-3026
(Please note that references to the original developers, Zeobit, should now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.

Someone pulled the CF out of my 4402. How to Restore?

So one of our 4402's we had laying around that wouldn't boot and I found that the CF card got yanked. I put a 32MB Cisco branded CF card just for kicks to see if the controller would recognize it, and it did. However; I have no idea how to load the WLC code onto a larger CF card to get the controller up and going again.
Any tips?
Title:
Img:
Link:
onClick:
Title:
Img:
Link:
onClick:

Well, we're a Cisco partner so we have some pull with our SE's. According to one of the high level engineers for the WLC's:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
"Back in the Airespace days, there were like 3 files on the
WLC. I THINK there way be a way to restore them individually, but it's tough to
come by those sep files these days."
So there may still be hope.

My iPods internal speaker isn't working, the sound works with headphones but now without. I've turned it on and off several times and pulled the headphone out and put them back in but nothing seems to work, please help?!

My sound usually works but just yesterday it totally just stopped. The sound is turned on full, the headphones are out, and I've tried turning it off then back on but it didn't help at all. It's an iPod touch 2nd generation, 8G.

Try the following to rule out a software probleM
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPodIf you still have the problem you likely have a problem with the headphone jack in the iPod. They can be replaced. I would make an appointment at the Genius Bar of an Apple store to identify/determine the cause.

IOS App Update Pulls the App Out of its Folder

This must be an FAQ. My apologies if so..
Example of problem:
On my iPhone 4S (running iOS 5.0.1) I place 8 news Apps into a "News" folder. Two weeks later 4 of the Apps get minor updates.
When I open the folder, the 4 Apps are missing.
(they are no longer in the folder, but are randomly placed on one of the top level screens.)
This is driving me crazy. I no longer use folders. Any ideas to keep this from happening?

Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
(C) Setup as new (data will be lost)
Settings>General>Reset>Erase all content and settings

I have an iPhone 4, and when I plug any headphones in, including the new apple ones, they just sound like the speakers are blown, but when I pull the jack out a little bit they sound fine?

I don't know what to do, considering I just bought these headphones and it's the phone which will not let them play. Any help?

Could be a contact problem. There are certain places inside the headset port where proper contact is needed for the various functions the Apple headset has, for example the Remote/microphone unit that cheaper headphones don't have.
You should have your phone checked by an Authorized Apple Service provider or by visiting an Apple Store next to your place.
iPhone - Contact Support - Apple Support
Apple - Support - Service Answer Center

High number of "The connection has timed out" errors. Where do I set the time out period (variable and file name) - windows 7

I usually use a wireless network at home and have very few time out problems with Firefox.
I am travelling and using Optus Wireless broadband where the average ping to a site is 700+ms .
I suspect that this is the cause of the high number of timeouts I am experiencing.
Optus say there are no problems so I think I will have to set the timeout to a longer period.
Please advise what variable name/s (and in which file) the timeout is set for LOADING PAGES.
Thanks in anticipation.
Greg Atkinson.
By the way the same is happening in IE8
and on many sites other than the Yahoo one below.
================Full Error Page ==============
URL is http://au.mg4.mail.yahoo.com/dc/launch?.gx=1&.rand=81jkv757qfdqt
=========================================
The connection has timed out
The server at au.mg4.mail.yahoo.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Having the same problem 4 out of 5 times I try to navigate to a new site I get the error "connection has timed out".
My I phone works fine on the same wireless connection so it must be something to do with the computer. The problem occurs on IE, firefox, and google chrome.
I too would like to know how to how to either fix this problem or failing that to extend the length of time before the connection times out (which is currently only about 5 seconds).
Please help!
Thanks in advance

IOS 7 and the 'greyed out' WiFi problem

Hi,
Looking for any solutions to this:
I upgraded to iOS 7 with no problems initially
After about 24-36 hrs I noticed I could no longer access websites via the WiFi connection, so I restarted the phone (a 4S on the Bell Canada network).
Since then, the WiFi slider has been greyed out and I can't access WiFi networks - with the exception of about an hour or two coincidentally around the time of the 7.0.2 release.
The WiFi button on the control centre appears to work, but of course doesn't actually function as designed.
So far I've tried the following:
Power on & off
Reset the phone (home & power buttons until Apple logo shows)
Reset network settings
Various versions of having the phone in or not-in airplane mode while doing the above
Renaming the phone without appostrophies.
Reinstalling iTunes & re sync
Upgrading to 7.0.2
Completely wiping the phone and reinstalling everything from iTunes (painful, I know)
Going into the store that sold me the phone (I won't say here, but they weren't very nice about Apple)
None of the above have worked.
Some reading suggests it could be the phone's chipset, but I'd argue that as it's connected to WiFi just fine a couple if times.
The only idea I've read and not yet got round to trying involves freezing the handset.
Anyone else with any other ideas?
Thanks!

Tony,
I've been reading up on this 4S wifi greyed out topic for the past several days too. I have a 5 and I don't have the wifi greyed out problem (knock on wood).
There's been quite a huge volume of discussion on this issue, with some people suggesting that there is a hardware defect, while others finding it just too coincidental that so many people would have this same problem on the same occassion, ie upgrade to iOS7 or 7.0.1 or 7.0.2.
The strangest thing about this: there's a user, carolinelewis, who is on her second new replacement 4S from Apple but they still show wifi greyed out after a while!
https://discussions.apple.com/thread/4638071?start=300&tstart=0
(page 21 of the thread).
Some people swear by the freezer method, some say the hot dryer method worked for them. Some say using either methods would get it fixed, some say the problem returns after some days.
My thoughts is that both freezer and hot dryer methods are actually taking the phone out of its operational temperature range.
Environmental requirements of 4S:
Operating temperature: 32° to 95° F (0° to 35° C)
Nonoperating temperature: -4° to 113° F (-20° to 45° C)
Relative humidity: 5% to 95% noncondensing
This action may have cause the 4S to do a complete initialization when returned to normal temperature, but these 2 methods appear to be last ditch efforts.
What I'd favor is power cycling the 4S, which can be achieved by running it completely out of battery, as shown in this Youtube video: http://youtu.be/o_ws5srnVVM
then plug in power and just may work for you.
I've also come across this person's workaround: http://www.youtube.com/watch?v=vzb5LNB9nIA
which may work for the 4S on iOS7 (it was posted for iOS6).
The steps this gentleman proposed appears to be worth a try. His strategy is to put the iphone into airplane mode, then do a hard reset.
Now, I have had my Thinkpad (Windows7) laptop's wifi freeze up akin to the behavior of 4S on iOS, ie can't turn on wifi radio via software, just simply refuses to see SSID of wifi router, won't join, etc. I've always been able to get things back to normal by power cycling the laptop. In some freak instances, even shutdown won't work, I would pull the battery out of the laptop to get eveything back to normal.
So my thoughts on this 4S wifi button grey out is that there is something in the iOS7 upgrade process that caused the wifi circuitry to freeze up and need a complete restart from powered down state.
The fact that the iphone doesn't have an easily removed battery makes it harder, and I suspect the freezer and dryer technics are an indirect way of acheiving total power off (battery not supplying power due to extreme high or low temperatures).
Furthermore, I've read that some people fixed their wifi greyed out problem by deleting older apps that may not be fully compatible with iOS7 and thus locking it up. Well, if that were true, then it may explain why the problem returns for some people. We won't know who upgraded which app.
And of course, there are instances where the wifi hardware that happen to be in a marginal state. Kind of like a PC working fine, installing updates, then stalling on reboot because the boot sector failed or some driver got stuck during initialization stage. This may explain why for some people the 4S had been working just fine but got broken wifi after the upgrade.
Best of luck to you in your efforts to get this problem fixed.

Copc...Tcode CO02...Where the system pull the figure for plan and actual?

Hi all,
Inside CO02, i go to "go to" then go to "costs" then click on "analysis" one report will come out.
Inside the report, can i know that how the figure in the report come out?
Inside the report for column like plan cost and actual cost. Where the system pull the figure out?
I know the system will pull the material cost out from MM and overhead from costing sheet. But what is the different between plan cost and actual cost? The figure the system pull out will put in plan cost or actual cost?
Best regards,
Lucas

Yes it needs to be licensed
Regards
Rob
http://oemgc.wordpress.com

Poweshell command to pull the CNames out of list of Host name.

Similar Messages

Maybe you are looking for