Copc...Tcode CO02...Where the system pull the figure for plan and actual?

Hi all,
Inside CO02, i go to "go to" then go to "costs" then click on "analysis" one report will come out.
Inside the report, can i know that how the figure in the report come out?
Inside the report for column like plan cost and actual cost. Where the system pull the figure out?
I know the system will pull the material cost out from MM and overhead from costing sheet. But what is the different between plan cost and actual cost? The figure the system pull out will put in plan cost or actual cost?
Best regards,
Lucas

Yes it needs to be licensed
Regards
Rob
http://oemgc.wordpress.com

Similar Messages

  • Where are the 'Whats New' pdf's for Planning and Essbase for System 9.3

    Anyone know where the find the 'Whats New' pdf's they used to have on Hyperion.com? I can't seem to find anything on Oracle cluster f*** website :) Also does anyone know if there is any information available on 9.5 release for June?
    Thanks

    Heres a good link for 9.3.1 documents:
    http://download.oracle.com/docs/cd/E10530_01/doc/index.htm
    Thanks for all the replies..

  • Configuring EarlyWatchAlert for all the systems in the landscape

    Gurus ,
    In SDCCN can i configure EARLYWATCHALERT session with targethost as SDCC_OSS
    now this has been only for production system . can this be done to all the systems in the landscape ?

    Hi Susin,
    As per me i could say the EWAlert only be configured for your production system rather
    than the other systems(Dev/QA) existing in your ladscape.
    If you are thinking to schedule this Alert for other products(BI/EP/XI) or for other SIDs,
    then yes...please go ahead.
    Why i am saying we can only schedule the EWAlert for production system, coz the
    the EarlyWatch report uses the SDCC_OSS RFC, which is a copy of the SAPOSS connection. And the target destination refers to SAP's system where one copy of your
    weekly shceduled EWAlert report goes to SAP end as well.
    Please inform me incase any other queries...
    Thank you,
    Tilak

  • HT201250 My time capsule is not allowing a back up indicating the 'time capsule is already in use'.  The system is set to back up and remove the oldest back up so it is not 'in use' as far as can see.  I believe something is in error.  Thoughts?

    I am new to this capability.  My problem is that my time capsule is not allowing a back up and indicates, The Back up 'is already in use' yet I have made no changes since I set the system up and now I am seeing this failure.  Thoughts?

    Thoughts?
    Bugs in Mavericks.
    Make sure that no other Macs are backing up at the time
    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup

  • I am having trouble getting mail from the server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system. Any ideas?

    I am having trouble getting mail from the shaw server that my new iMac is connected to. I have to reboot the system to get Outlook for Mac to access the system and obtain new messages. Any ideas? Its at the point where I have started using the PC again as its less trouble.......

    In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".<br />
    See "Firefox connection settings" in [[Server not found]]
    You can find the connection settings in "Tools > Options > Advanced : Network : Connection"<br />
    If you do not need to use a proxy to connect to internet then select No Proxy

  • Message:You are already logged on to the system in the following sessions

    Hi Experts,
    We are implementing SAP SRM7.0 with Portal integration.
    After logging in when we click on the shop link , it is taking us to the new screen and getting message saying "You are already logged on to the system in the following sessions"
    and also providing the details of the user.
    This is happening for all the users created in portal.
    can someone help me to resolve the issue.it would be really appreaciated.
    Thanks & Regards,
    Prashanth P.

    Hi Prashanth,
    You can enable multiple login in two ways.
    goto SICF and open service.
    1.Navigate to default_host->sap->bc->bsp->sap->srm(double click on srm service)
    2.Open Error Pages tab and clcik on Configuration button.
    3.Check whether check for multiple logon is enabled.
    or
    goto RZ10
    To allow the user to have multiple login in SAP R/3, one have to set the Profile Parameters u201CLogin/disable_multi_gui_loginu201D OR u201CLogin/multi_login_usersu201D.
    1. Login/disable_multi_gui_login
    Controls whether multiple logins are enabled or disabled. 0 = enable 1 = disable
    2. Login/multi_login_users
    Here a list [user IDs] can be deposited that would allow users a multiple login even though the multi login is generally disabled. The multiple login information are stored in the table URSR41_MLD.
    Note: Select extented administration and clcik display. this is the place to maintain parameters.
    Ref:
    [Configuration Settings|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/3a0623902131c3e10000000a42189d/frameset.htm]
    [Login Parameters|http://help.sap.com/saphelp_nw04s/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm]
    I  suggest to get basis team support for this.
    Regards,
    Anand G

  • When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?

    When I create a New Folder (on the desktop or in Finder), the system uses the Generic Document Icon instead of the Generic Folder Icon. How can I change this back?
    All of a sudden I noticed that most of the folders on my computer were no longer using the folder icon, but the generic document icon. I had to manually change back the icon being used by opening Get Info for each folder and copying and pasting the generic folder icon from some folders that remained unchanged. Now whenever I create a New Folder (right click -> "New Folder"), the icon that shows up is the generic document icon (white page with top right corner turned down). And I have to manually change it so it shows up as a folder in Finder or on my desktop. I don't know why or how this switch happened. All of the folders now on my computer look ok, but I need to change the default so when I create a New Folder it uses the correct icon.
    I have also Forced Relaunch of my Finder and rebooted the system. I downloaded Candybar but am not sure what will fix anything, so I haven't proceeded.
    Anyone know how I can do this? Thanks.

    Anyone?

  • I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

    I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

    Here I am using Java Type IV for database
    connection.
    So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
    So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

  • The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

    The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

    You hit the target CT.
    It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
    I hope to make some sense here.

  • I updated imovie, which is now totally different.  I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos.  Clicking on "close" doesn't work.  How do I get out of "import"?

    I updated imovie, which is now totally different.  I tried to import videos from iphotos, but the system is now stuck on "import" and it doesn't include iphotos.  Clicking on "close" doesn't work.  How do I get out of "import" and then how do I access iphoto?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

    I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

    I think you're asking 2 different questions.
    The PID control toolset is for using PID loops for control; it's just software.
    The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
    I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
    Mark

  • Cannot keep Server up and running. Shutdown requested by OVM. The system is going down for system halt NOW!

    I have OVS 3.x.x and OVM 3.x.x running on the same physical server.  I had some issues trying to configure storage via OVM and  I issued a shutdown (I think) from the OVM Web Interface.  Now I am unable to keep the server up and running.  Everytime I turn on the server, after Oracle VM Manager starts, it shuts down the server automatically within a minute or two after startup. 
    I am able  to login to the server via Putty and stop ovmm service manually.  When Oracle VM Manager service is stopped, (SERVICE OVMM STOP) the server does not shutdown automatically.  However as soon as I restart the OVMM service, it shuts down the server with message...
    Shutdown requested by OVM. The system is going down for system halt NOW!
    How do I find out what is causing OVM to issue the shutdown command and edit and fix via command line?

    Since your server was continually rebooting, do you remember if you issued a shutdown or reboot from OVM web interface?  Mine was just shutting down.  Have you tried to use the Oracle Virtual Manage Web Interface to either reboot or shutdown the server after your upgrade to 3.2.4?  FYI I do not have support.  This is my sandbox. 
    user5728486 wrote:
    After a week or so without a resolution from support, I noticed ....
    Are you saying that even paying for Oracle Support, they did not resolve this issue?

  • I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

    I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

    You did turned in Settings > General > Usage > Battery Percentage: ON?
    Try a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • Hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    hello! My iMac frozed and I had to switch the electricty supply off and on in order to start again the system, with the problem that the screen looks wierd, I tried to calibrate it... doesnt works any suggestion?

    Dear Paul, thank you very much for your time and answer, I followed those steps, somehow it helped the performance of my Imac, is faster now, but the screen issue about the very High contrast colours is still there. Since I am a photographer I am very depending on the screen calibration. I am worried that I came to damage the video card when I shut down the computer from the swicth when It was frozed.

  • Stop and start the system via the SAP GUI

    ........ although I don't know the answer!
    We have SAP running on an iSeries/DB2 format.
    And we of course have stopped and started our SAP systems many times before via an iSeries screen.
    One thing we have never had to do, is stop and start the system via the SAP GUI.
    Is this possible? If so, how is it done?
    Surprisingly difficult to find a solution online.
    Edited by: Juan Reyes on Aug 10, 2010 11:10 AM

    Paui,
    You can also do a soft shutdown, which waits till the active users/sessions are logged out (Draing out the sesstions) and no more new users are allowed to login during that time.
    Goto SM51, select the instace/server you want to stop then menu --> Goto --> Server Name --> Administration --> Shut Down Server (soft).
    Here you can also select a hard shutdown if the situation demands by following the same menu path.
    Even though your question is answered but I still wanted to update you the options to select.
    -Mahesh

Maybe you are looking for

  • How do i connect my iMac Screen to Apple TV?

    I have read i can connect my iMac Screen to my Apple TV via Airplay. How do i do that? I have Mac OS X Version 10.7.4 I have the OS X Lion ready to download and install, but can't back up my computer (no where to back it up to :/)

  • Dynamic language translation with XML publisher/XLIFF

    Greetings all - We are on an Oracle 11i.5.8 global environment. There is a need for some of the countries to print their bank checks in their local language. Even with pre-printed stationary etc., the existing challenge is to dynamically print the am

  • Can I use my iPad 3g service internationally - is international plan available?

    Anticipating some international travel in the near future.  Want to take my ipad, but not sure if I can use the 3g service internationally.  Generally, phones require a special plan for international use.  Is that available for the ipad or can I use

  • Product creation in CRM system

    hi Guys, I created Attributes, Set Types, Category and hierarchy. Later I when to Product maintenance and created a product under the new Category I created. When I tried to save the product, it says 'saving is not possible'. The error message is "Da

  • SAPWebConsole - dropdown field works in ABAP but does not work on Web

    Hi All, I am writing an RF transaction in ABAP using regular dialog programming. My transaction works fine in the GUI. But it does not work OK when I access the transaction over the web (using IE) via SAPWebConsole. My issue is that on the SAPGUI I h