POWL inbox dump error from portal
Hi all,
we are on 6.06 our problem is about powl inbox.(IBO_WDA_INBOX with config ID HRMSS_AC_POWL_INBOX ). I can call the application from se80, it is working perfect, however when the same application is called from portal I got an portal error and could not display it. I tried to upload the webdynpro application to portal as a different ivew resulty is the same . Same error even when I link the same application from the URL link. Any idea ?
http://xxxxxxxxxxxxxxxxxxxx/sap/bc/webdynpro/sap/ibo_wda_inbox?sap-language=EN&sap-wd-configId=HRMSS_AC_POWL_INBOX
what is the whole error you get can you paste from ST22? check your Profile Table CATS_APPR_CUST , should at least contain SAP_LINE & SAP_PROJ check in LPD_CUST MSS NAV http://scn.sap.com/thread/3350041 Please advise the system version you are using? use MANAGER_MSS_INBOX_2 http://scn.sap.com/thread/3484138 SAP Note 1800335 - CATS WDA: Web Dynpro ABAP based CATS use in UWL
Similar Messages
-
RFC Call Error - from Portal End - For ESS Personal Information service
Hi,
I am getting "Syntax error in program SAPLHRXSS_PER_MAC ., error key: RFC_ERROR_SYSTEM_FAILURE " error Message on the portal (ESS--->Personal Information Screen).
When I did RFC trace analysis (using ST 22) this is what i get.
Can you let me know what could be the issue.
We are running HR Backend(Support Pack 15,ecc 5.0).
Portal (EP 6.0 SP19, ESS 100 (SP 10)).
Could you please let me know what could be the issue ?
Syntax error in program "SAPLHRXSS_PER_MAC ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPMSSY1" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
Author and last person to change the Include are:
Author "SAP "
Last changed by "C5069405 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLHRXSS_PER_MAC ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "srv006"
Network address.......... "167.116.230.56"
Operating system......... "HP-UX"
Release.................. "B.11.11"
Hardware type............ "9000/800"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "srv006"
Database type............ "ORACLE"
Database name............ "H81"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "May 21 2006 20:29:01"
Created in............... "HP-UX B.11.00 A 9000/800"
Database version......... "OCI_920 "
Patch level.............. "129"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 4189928
Heap..................... 0
Page..................... 0
MM Used.................. 629192
MM Free.................. 3558216
SAP Release.............. "640"
User and Transaction
Information on where terminated
The termination occurred in the ABAP program "SAPMSSY1" in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
The termination occurred in line 68 of the source code of the (Include)
program "SAPMSSY1"
of the source code of program "SAPMSSY1" (when calling the editor 680).
Source Code Extract
Line SourceCde
38
39 module %_rfcdia_call output.
40 "Do not display screen !
41 call 'DY_INVISIBLE_SCREEN'.
42 perform remote_function_diacall.
43 endmodule.
44
45 module %_cpic_start.
46 if sy-xprog(4) = '%RFC'.
47 perform remote_function_call using rfctype_external_cpic.
48 else.
49 call 'APPC_HD' id 'HEADER' field header id 'CONVID' field convid.
50 perform cpic_call using convid.
51 endif.
52 endmodule.
53
54
55 form cpic_call using convid type c.
56 communication send id convid buffer header.
57 if sy-subrc eq 0.
58 perform (sy-xform) in program (sy-xprog).
59 else.
60 message a800.
61 endif.
62 endform.
63
64 form remote_function_call using value(type).
65 do.
66 * test if sy-xprog and sy-xform are set
67 * sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
>>>>> call 'RfcImport' id 'Type' field type.
69 perform (sy-xform) in program (sy-xprog).
70 rsyn >scont sysc 00011111 0.
71 enddo.
72 endform.
73
74 form remote_function_diastart.
75 do.
76 call 'RfcImport' id 'Type' field rfctype_rfcdia.
77 perform (sy-xform) in program (sy-xprog).
78 "Parking position for next request
79 rsyn >scont sysc 00011111 10.
80 "ALternativ : Free mode
81 "COMMIT WORK.
82 "SYSTEM-CALL FREE MODE 0.
83 enddo.
84 endform.
85
86 form remote_function_diacall.
87 sy-xcode = '%_@no@'.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE CPIC and RFC Control
SY-MSGTY
SY-MSGID
SY-MSGNO 000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
2 FORM SAPMSSY1 SAPMSSY1 68
REMOTE_FUNCTION_CALL
1 MODULE (PBO) SAPMSSY1 SAPMSSY1 30
%_RFC_START
Chosen variables
Name
Val.
No. 2 Ty. FORM
Name REMOTE_FUNCTION_CALL
%_DUMMY$$
2222
0000
SY-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
SYST-REPID
SAPMSSY1
5454555322222222222222222222222222222222
310D339100000000000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TYPE
3
0000
0003
SY-XPROG
SAPLSYST
5454555522222222222222222222222222222222
310C393400000000000000000000000000000000
SY-XFORM
HRXSS_PER_CLEANUP
455555545544444552222222222222
82833F052F3C51E500000000000000
%_SPACE
2
0
No. 1 Ty. MODULE (PBO)
Name %_RFC_START
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
RFCTYPE_INTERNAL
3
0000
0003
Internal notes
The termination occurred in the function "ab_genprog" of the SAP
Basis System, specifically in line 1374 of the module
"//bas/640_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CALY".
The internal session was started at 20070502223335.
Program name.........: "SAPLHRXSS_PER_MAC ".
Error message........: "The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
( 0) 0x40000000016d6a8c CTrcStack2 + 0x2bc [dw.sapH81_DVEBMGS33]
( 1) 0x40000000016d67c0 CTrcStack + 0x18 [dw.sapH81_DVEBMGS33]
( 2) 0x4000000001d41438 rabax_CStackSave__Fv + 0x100 [dw.sapH81_DVEBMGS33]
( 3) 0x4000000001d4dbf8 ab_rabax + 0x1f68 [dw.sapH81_DVEBMGS33]
( 4) 0x40000000018cc09c ab_genprog__FPcPvUii + 0xdbc [dw.sapH81_DVEBMGS33]
( 5) 0x4000000000d3b4cc newload__FPcP13TmpSubpoolDirUi + 0x29c [dw.sapH81_DVEBMGS33]
( 6) 0x40000000016a7324 ab_LoadProg__FPcUi + 0xec [dw.sapH81_DVEBMGS33]
( 7) 0x40000000016831fc ab_link + 0x334 [dw.sapH81_DVEBMGS33]
( 8) 0x40000000015694d4 ab_rfcimport + 0xccc [dw.sapH81_DVEBMGS33]
( 9) 0x40000000018cff98 ab_jcaly__Fv + 0x598 [dw.sapH81_DVEBMGS33]
(10) 0x4000000000f98df8 ab_extri__Fv + 0x17a0 [dw.sapH81_DVEBMGS33]
(11) 0x40000000016ab2d8 ab_xevent__FPCc + 0x38 [dw.sapH81_DVEBMGS33]
(12) 0x400000000189c9a8 ab_dstep + 0x120 [dw.sapH81_DVEBMGS33]
(13) 0x4000000000ed4c00 dynpmcal + 0xd0 [dw.sapH81_DVEBMGS33]
(14) 0x4000000000ed1554 dynppbo0 + 0x1e4 [dw.sapH81_DVEBMGS33]
(15) 0x4000000000ed0af4 dynprctl + 0x43c [dw.sapH81_DVEBMGS33]
(16) 0x4000000000ecb7a0 dynpen00 + 0x2118 [dw.sapH81_DVEBMGS33]
(17) 0x4000000000fa598c Thdynpen00 + 0x6a4 [dw.sapH81_DVEBMGS33]
(18) 0x4000000000fa49b8 TskhLoop + 0x50d8 [dw.sapH81_DVEBMGS33]
(19) 0x4000000000f999f8 tskhstart + 0x1e0 [dw.sapH81_DVEBMGS33]
(20) 0x4000000000d42194 DpMain + 0x484 [dw.sapH81_DVEBMGS33]
(21) 0x400000000220d41c nlsui_main + 0x14 [dw.sapH81_DVEBMGS33]
(22) 0x4000000000992794 main + 0x14 [dw.sapH81_DVEBMGS33]
(23) 0xc000000000020ab0 $START$ + 0xa0 [/usr/lib/pa20_64/dld.sl]
List of ABAP programs affected
Index Ty. Program Group Date Time Size Lang.
0 Prg SAPMSSY1 0 06.11.2003 20:53:07 18432 E
1 Prg SAPLSYST 1 10.05.2006 09:57:38 30720 E
2 Typ SYST 0 04.12.2000 14:54:51 27648
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPMSSY1
SYST . . : : 00002404
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 SourceCde
118 CLEA 00 0035 SAPMSSY1
119 CLEA 00 0036 SAPMSSY1
120 CLEA 00 0037 SAPMSSY1
121 MESS 00 001C SAPMSSY1
122 ENDF 00 0000 SAPMSSY1
123 -
00 0000 SAPMSSY1
124 PERP 00 0001 SAPMSSY1
125 PERP 02 0000 SAPMSSY1
126 WHIL 00 0002 0000 0000 0000 0000 0000 0000 SAPMSSY1
130 WHIL 00 0003 0000 0000 0000 0000 0000 0000 SAPMSSY1
134 BRAN 05 000E SAPMSSY1
135 CALY 00 0003 0038 002A 0005 002B 0000 0000 SAPMSSY1
>>>>> CALY 02 0000 0039 8000 0000 0000 0000 0000 SAPMSSY1
143 xper 02 0000 0010 0011 SAPMSSY1
145 PERP 80 0000 SAPMSSY1
146 SYSC 1F 0000 SAPMSSY1
147 BRAX 00 FFEF SAPMSSY1
148 WHIL 00 0004 0000 0000 0000 0000 0000 0000 SAPMSSY1
152 ENDF 00 0000 SAPMSSY1
153 -
00 0000 SAPMSSY1Hi,
The error is occuring in the program file SAPLHRXSS_PER_MAC.
In program "SAPLHRXSS_PER_MAC ", the following syntax error occurred
in the Include "IF_HRPA_PERNR_INFTY_XSS=======IU " in line 114:
"The type "HRXSS_PER_SUPPLD_SUBTY_INFO_T" is unknown."
Information on where terminated
The termination occurred in the ABAP program "SAPMSSY1" in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
This place where it has terminated is highlighted in bold letters.
form remote_function_call using value(type).
do.
test if sy-xprog and sy-xform are set
sy-xform = 'quatsch'. sy-xprog = 'quatsch'.
<b> call 'RfcImport' id 'Type' field type. </b>
perform (sy-xform) in program (sy-xprog).
rsyn >scont sysc 00011111 0.
enddo.
endform.
Thanks,
Manoj -
Import Dump Error from 10g to 11G Database
Hi
We are installing dump from 10g DB to 11g DB. We have received dump file in tape and trying to import with imp command.
imp system/sys@test11g file=/dev/st0 full=y fromuser=x touser=x
However, it gives error "IMP-00037: Character set marker unknown". Please advice on it also let us know things to take care while installing 10g dump into 11g DB.
Thanks in advance.Hi All
We have checked with client and have export log , dump was exported with expdp command. Client had sent dump in tap drive. So, we have tried with impdp command
impdp system/sys@test11g SCHEMAS=test DIRECTORY=data_pump_dir LOGFILE=schemas.log
I have following questions ->
1) With impdp it is always require to have oracle directory object to point dump file?
2) Can i create oracle direcotry with tap device path i.e /dev/st01
For now, i have created oracle direcotry with tap device path. However above command is giving error as below :
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
Please let me know how to do import dump with impdp command with exported file in tap drive.
Thanks in advance -
Dump error while executing this unicode program.....
Hi,
I got a program for 'Production Order Quantity Change Daily Checklist' ,but while executing i got the dump error from the following program stating tat,
The current statement is only defined for character-type data objects.
Error in the ABAP Application Program
The current ABAP program "ZPROD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
For the statement
"READ DATASET ... INTO f"
only character-type data objects are supported at the argument position
"f".
In this case. the operand "f" has the non-character-type "u". The
current program is a Unicode program. In the Unicode context, the type
'X' or structures containing not only character-type components are
regarded as non-character-type.
Program:
REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
LINE-COUNT 058(001).
TABLES: AUFK, "Order master data
AFKO, "Order header data PP orders
RESB, "Reservation/dependent requirements
MAST, "Material to BOM Link
STKO, "BOM Header
STPO. "BOM item
DATA: BEGIN OF WA,
AUART TYPE AUFK-AUART,
AUFNR TYPE AUFK-AUFNR,
AEDAT TYPE AUFK-AEDAT,
AENAM TYPE AUFK-AENAM,
WERKS TYPE AUFK-WERKS,
PLNBEZ TYPE AFKO-PLNBEZ,
GAMNG TYPE AFKO-GAMNG,
GASMG TYPE AFKO-GASMG,
MATNR TYPE RESB-MATNR,
POSNR TYPE RESB-POSNR,
BDMNG TYPE RESB-BDMNG,
BMENG TYPE STKO-BMENG,
MENGE TYPE STPO-MENGE,
END OF WA,
ITAB LIKE SORTED TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
DATA: BEGIN OF ITAB2 OCCURS 0.
INCLUDE STRUCTURE WA.
DATA: END OF ITAB2.
DATA: BEGIN OF ITAB_AUFK OCCURS 0,
AUART LIKE AUFK-AUART,
AUFNR LIKE AUFK-AUFNR,
POSNR LIKE RESB-POSNR,
AEDAT LIKE AUFK-AEDAT,
AENAM LIKE AUFK-AENAM,
WERKS LIKE AUFK-WERKS,
PLNBEZ LIKE AFKO-PLNBEZ,
GAMNG(7) TYPE P DECIMALS 0,
GASMG(7) TYPE P DECIMALS 0,
MATNR LIKE RESB-MATNR,
BDMNG(7) TYPE P DECIMALS 0,
BMENG(7) TYPE P DECIMALS 0,
MENGE(7) TYPE P DECIMALS 3.
DATA: END OF ITAB_AUFK.
DATA: FDATE LIKE SY-DATUM,
LDATE LIKE SY-DATUM.
DATA: X_AUFNR LIKE AFKO-AUFNR,
X_MENGE(7) TYPE P DECIMALS 0,
X_ERR(3).
DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
SELECT-OPTIONS T_WERKS FOR AUFK-WERKS OBLIGATORY.
SELECT-OPTIONS T_AUFNR FOR AUFK-AUFNR.
SELECT-OPTIONS T_AEDAT FOR AUFK-AEDAT.
PARAMETERS PDATA LIKE W_DATASET1.
CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
PERFORM F_COLLECT_DATA.
FORM F_COLLECT_DATA.
OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
DO.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET W_DATASET1 INTO WA.
APPEND WA TO ITAB2.
ENDDO.
CLOSE DATASET W_DATASET1.
SELECT AAUFNR AAUART AAEDAT AAENAM A~WERKS
BPLNBEZ BGAMNG B~GASMG
CMATNR CBDMNG C~POSNR
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM ( AUFK AS A
INNER JOIN AFKO AS B ON BAUFNR = AAUFNR
INNER JOIN RESB AS C ON CAUFNR = AAUFNR )
WHERE A~AEDAT IN T_AEDAT
AND A~WERKS IN T_WERKS.
LOOP AT ITAB INTO WA.
CLEAR MAST.
SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
AND WERKS = WA-WERKS.
CLEAR STKO.
SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
AND STLAL = MAST-STLAL.
CLEAR STPO.
SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
AND POSNR = WA-POSNR.
WA-BMENG = STKO-BMENG.
WA-MENGE = STPO-MENGE.
MODIFY ITAB FROM WA.
AT NEW AUFNR.
SKIP.
ENDAT.
LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
AND POSNR = WA-POSNR.
IF ITAB2-GAMNG <> WA-GAMNG OR
ITAB2-GASMG <> WA-GASMG OR
ITAB2-BDMNG <> WA-BDMNG.
CLEAR X_MENGE.
IF ITAB2-BMENG <> 0.
X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
ENDIF.
CLEAR X_ERR.
IF ITAB2-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR COL_TOTAL.
WRITE: / ITAB2-AUART UNDER 'Type',
ITAB2-AUFNR UNDER 'Prod Order',
ITAB2-AEDAT UNDER 'Last Chg Dt',
ITAB2-AENAM UNDER 'Last Chg by',
ITAB2-WERKS UNDER 'Plant',
ITAB2-PLNBEZ UNDER 'Material',
(10) ITAB2-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) ITAB2-GASMG UNDER 'Scrap Qty' DECIMALS 0,
ITAB2-POSNR UNDER 'Item',
ITAB2-MATNR UNDER 'Component Req',
(10) ITAB2-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
ITAB2-BMENG UNDER 'BOM Base',
ITAB2-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
CLEAR X_MENGE.
IF WA-BMENG <> 0.
X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
ENDIF.
CLEAR X_ERR.
IF WA-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / WA-AUART UNDER 'Type',
WA-AUFNR UNDER 'Prod Order',
WA-AEDAT UNDER 'Last Chg Dt',
WA-AENAM UNDER 'Last Chg by',
WA-WERKS UNDER 'Plant',
WA-PLNBEZ UNDER 'Material',
(10) WA-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) WA-GASMG UNDER 'Scrap Qty' DECIMALS 0,
WA-POSNR UNDER 'Item',
WA-MATNR UNDER 'Component Req',
(10) WA-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
WA-BMENG UNDER 'BOM Base',
WA-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT ITAB2.
LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
AND POSNR = ITAB2-POSNR.
DELETE ITAB2.
ENDLOOP.
SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
IF SY-SUBRC <> 0.
DELETE ITAB2.
ENDIF.
ENDLOOP.
OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
LOOP AT ITAB INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
LOOP AT ITAB2 INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
CLOSE DATASET W_DATASET1.
ENDFORM.
TOP-OF-PAGE.
FORMAT COLOR COL_TOTAL.
WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
50 'Daily Qty Changed Checklist for Production Order',
120 SY-PAGNO.
SKIP.
WRITE: / 'Plant ', T_WERKS-LOW.
WRITE: ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
SKIP.
WRITE: /1 'Type',
6 'Prod Order',
17 'Last Chg Dt',
29 'Last Chg by',
42 'Plant',
49 'Material',
69 'Order Qty',
83 'Scrap Qty',
99 'Item',
105 'Component Req',
121 'Req Qty',
135 'BOM Qty',
149 'BOM Base',
163 'BOM Comp',
178 'Rmks'.
ULINE.
WRITE: / 'Previous data :- '.
FORMAT COLOR OFF.
WRITE: / 'Current data :- '.
INITIALIZATION.
LDATE = SY-DATUM.
LDATE = LDATE - 1.
FDATE = LDATE.
MOVE: FDATE TO T_AEDAT-LOW.
APPEND T_AEDAT.
PDATA = 'AE001'.
So,give me any suggestions where to customize r do rectify the error.This will be useful for me.
Advance Thnx..*REPORT ZPROD.
REPORT ZPPORDER LINE-SIZE 180 NO STANDARD PAGE HEADING
LINE-COUNT 058(001).
TABLES: AUFK, "Order master data
AFKO, "Order header data PP orders
RESB, "Reservation/dependent requirements
MAST, "Material to BOM Link
STKO, "BOM Header
STPO. "BOM item
DATA: BEGIN OF WA,
AUART TYPE AUFK-AUART,
AUFNR TYPE AUFK-AUFNR,
AEDAT TYPE AUFK-AEDAT,
AENAM TYPE AUFK-AENAM,
WERKS TYPE AUFK-WERKS,
PLNBEZ TYPE AFKO-PLNBEZ,
GAMNG TYPE AFKO-GAMNG,
GASMG TYPE AFKO-GASMG,
MATNR TYPE RESB-MATNR,
POSNR TYPE RESB-POSNR,
BDMNG TYPE RESB-BDMNG,
BMENG TYPE STKO-BMENG,
MENGE TYPE STPO-MENGE,
END OF WA,
ITAB LIKE SORTED TABLE OF WA WITH NON-UNIQUE KEY AUFNR POSNR.
DATA: BEGIN OF ITAB2 OCCURS 0.
INCLUDE STRUCTURE WA.
DATA: END OF ITAB2.
DATA: BEGIN OF ITAB_AUFK OCCURS 0,
AUART LIKE AUFK-AUART,
AUFNR LIKE AUFK-AUFNR,
POSNR LIKE RESB-POSNR,
AEDAT LIKE AUFK-AEDAT,
AENAM LIKE AUFK-AENAM,
WERKS LIKE AUFK-WERKS,
PLNBEZ LIKE AFKO-PLNBEZ,
GAMNG(7) TYPE P DECIMALS 0,
GASMG(7) TYPE P DECIMALS 0,
MATNR LIKE RESB-MATNR,
BDMNG(7) TYPE P DECIMALS 0,
BMENG(7) TYPE P DECIMALS 0,
MENGE(7) TYPE P DECIMALS 3.
DATA: END OF ITAB_AUFK.
DATA: FDATE LIKE SY-DATUM,
LDATE LIKE SY-DATUM.
DATA: X_AUFNR LIKE AFKO-AUFNR,
X_MENGE(7) TYPE P DECIMALS 0,
X_ERR(3).
DATA: W_DATASET1(500) VALUE '/usr/sap/trans/data/'.
SELECT-OPTIONS T_WERKS FOR AUFK-WERKS OBLIGATORY.
SELECT-OPTIONS T_AUFNR FOR AUFK-AUFNR.
SELECT-OPTIONS T_AEDAT FOR AUFK-AEDAT.
PARAMETERS PDATA LIKE W_DATASET1.
CONCATENATE W_DATASET1 PDATA INTO W_DATASET1.
PERFORM F_COLLECT_DATA.
FORM F_COLLECT_DATA.
OPEN DATASET W_DATASET1 FOR INPUT IN TEXT MODE encoding default.
DO.
IF sy-subrc <> 0.
EXIT.
ENDIF.
READ DATASET W_DATASET1 INTO WA.
APPEND WA TO ITAB2.
ENDDO.
CLOSE DATASET W_DATASET1.
SELECT AAUFNR AAUART AAEDAT AAENAM A~WERKS
BPLNBEZ BGAMNG B~GASMG
CMATNR CBDMNG C~POSNR
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM ( AUFK AS A
INNER JOIN AFKO AS B ON BAUFNR = AAUFNR
INNER JOIN RESB AS C ON CAUFNR = AAUFNR )
WHERE A~AEDAT IN T_AEDAT
AND A~WERKS IN T_WERKS.
LOOP AT ITAB INTO WA.
CLEAR MAST.
SELECT SINGLE * FROM MAST WHERE MATNR = WA-PLNBEZ
AND WERKS = WA-WERKS.
CLEAR STKO.
SELECT SINGLE * FROM STKO WHERE STLNR = MAST-STLNR
AND STLAL = MAST-STLAL.
CLEAR STPO.
SELECT SINGLE * FROM STPO WHERE STLNR = MAST-STLNR
AND POSNR = WA-POSNR.
WA-BMENG = STKO-BMENG.
WA-MENGE = STPO-MENGE.
MODIFY ITAB FROM WA.
AT NEW AUFNR.
SKIP.
ENDAT.
LOOP AT ITAB2 WHERE AUFNR = WA-AUFNR
AND POSNR = WA-POSNR.
IF ITAB2-GAMNG <> WA-GAMNG OR
ITAB2-GASMG <> WA-GASMG OR
ITAB2-BDMNG <> WA-BDMNG.
CLEAR X_MENGE.
IF ITAB2-BMENG <> 0.
X_MENGE = ITAB2-GAMNG / ITAB2-BMENG * ITAB2-MENGE.
ENDIF.
CLEAR X_ERR.
IF ITAB2-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR COL_TOTAL.
WRITE: / ITAB2-AUART UNDER 'Type',
ITAB2-AUFNR UNDER 'Prod Order',
ITAB2-AEDAT UNDER 'Last Chg Dt',
ITAB2-AENAM UNDER 'Last Chg by',
ITAB2-WERKS UNDER 'Plant',
ITAB2-PLNBEZ UNDER 'Material',
(10) ITAB2-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) ITAB2-GASMG UNDER 'Scrap Qty' DECIMALS 0,
ITAB2-POSNR UNDER 'Item',
ITAB2-MATNR UNDER 'Component Req',
(10) ITAB2-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
ITAB2-BMENG UNDER 'BOM Base',
ITAB2-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
CLEAR X_MENGE.
IF WA-BMENG <> 0.
X_MENGE = WA-GAMNG / WA-BMENG * WA-MENGE.
ENDIF.
CLEAR X_ERR.
IF WA-BDMNG <> X_MENGE.
X_ERR = 'Err'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / WA-AUART UNDER 'Type',
WA-AUFNR UNDER 'Prod Order',
WA-AEDAT UNDER 'Last Chg Dt',
WA-AENAM UNDER 'Last Chg by',
WA-WERKS UNDER 'Plant',
WA-PLNBEZ UNDER 'Material',
(10) WA-GAMNG UNDER 'Order Qty' DECIMALS 0,
(10) WA-GASMG UNDER 'Scrap Qty' DECIMALS 0,
WA-POSNR UNDER 'Item',
WA-MATNR UNDER 'Component Req',
(10) WA-BDMNG UNDER 'Req Qty' DECIMALS 0,
X_MENGE UNDER 'BOM Qty' COLOR COL_TOTAL,
WA-BMENG UNDER 'BOM Base',
WA-MENGE UNDER 'BOM Comp',
X_ERR UNDER 'Rmks' COLOR COL_TOTAL.
ENDIF.
ENDLOOP.
ENDLOOP.
LOOP AT ITAB2.
LOOP AT ITAB INTO WA WHERE AUFNR = ITAB2-AUFNR
AND POSNR = ITAB2-POSNR.
DELETE ITAB2.
ENDLOOP.
SELECT SINGLE * FROM AUFK WHERE AUFNR = ITAB2-AUFNR.
IF SY-SUBRC <> 0.
DELETE ITAB2.
ENDIF.
ENDLOOP.
OPEN DATASET W_DATASET1 FOR OUTPUT IN TEXT MODE encoding default.
LOOP AT ITAB INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
LOOP AT ITAB2 INTO WA.
TRANSFER WA TO W_DATASET1.
ENDLOOP.
CLOSE DATASET W_DATASET1.
ENDFORM.
TOP-OF-PAGE.
FORMAT COLOR COL_TOTAL.
WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
50 'Daily Qty Changed Checklist for Production Order',
120 SY-PAGNO.
SKIP.
WRITE: / 'Plant ', T_WERKS-LOW.
WRITE: ' Last Change Date ', T_AEDAT-LOW, ' to ', T_AEDAT-HIGH.
SKIP.
WRITE: /1 'Type',
6 'Prod Order',
17 'Last Chg Dt',
29 'Last Chg by',
42 'Plant',
49 'Material',
69 'Order Qty',
83 'Scrap Qty',
99 'Item',
105 'Component Req',
121 'Req Qty',
135 'BOM Qty',
149 'BOM Base',
163 'BOM Comp',
178 'Rmks'.
ULINE.
WRITE: / 'Previous data :- '.
FORMAT COLOR OFF.
WRITE: / 'Current data :- '.
INITIALIZATION.
LDATE = SY-DATUM.
LDATE = LDATE - 1.
FDATE = LDATE.
MOVE: FDATE TO T_AEDAT-LOW.
APPEND T_AEDAT.
PDATA = 'AE001'. -
ESS: Error while creating Family/Dependents record from portal
Hi All,
I'm getting a critical error while creating family members and dependents record from portal.
CRITICAL ERROR
"Type conflict in the ASSIGN statement in the program CL_HRPA_CONVERT_0021_US=======CP ., error key: RFC_ERROR_SYSTEM_FAILURE"
I checked the short dump in R/3 Side and searched for OSS note and didnt find any. I raised an OSS message.
If any had've already comeacross this, pls let me know.
System Details
EP 6.0 SP15
ESS Business Package BPERP4ESS0_0
ESS Support Package ESS10P_2-10002965, PCUIGP010P_1-20000568
Thanks
KarthikHello Karthik:
I'm getting the same error:
"critical error while creating family members and dependents record from portal.
Type conflict in the ASSIGN statement in the program CL_HRPA_CONVERT_0021_US=======CP ., error key: RFC_ERROR_SYSTEM_FAILURE"
Maybe you can help me solving this problem.
I appreciate your help.
Thanks in advance. -
Can POWL work items be executed from Portal???
Hi All,
May any one tell me if POWL work items from any other system (GRC, for example) be executed in Portal?
As of now, the POWL item is visible in Portal. However, it can not be executed and give below error:
Not sure how to troubleshoot this and get these POWL items executed from Portal. Any help on this would be a great help!
Regards,
FaisalVeera,
Thanks for your reply.
Yes, the respective application in GRC system can be executed from SE80.
Not only that, from NWBC, these types of work items can be successfully executed. The problem is that, the can not be executed from Portal.
Please advise.
Regards,
Faisal -
Lotus Notes Error while Accessing from portal page
Hi,
I ahve suceesfully installed Lotus Notes Application , i am also
getting message from when accessing from External Administration
Link.i have added the Lotus Notes Inbox Portlet to my portal
page , But here it is showing Authentication Failed (Update
login information). I again provided all the informtion again ,
But still it is showing the same error . Can anybody help me
what to do ?Dear
You will have to create one System for R/3 Server Access, Once you have created that you will have to maintain User mapping for System Access for each individual users, who want to access the DMS Documents from Portal.
Regards,
Tushar Dave -
Short Dump error while loading data from R/3 to ODS
Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
transfer program using the function Activate. Remove possible syntax
errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PMHi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani.... -
Dump during BAPI_ENTRYSHEET_CREATE calling from Portal
Hi,
I am getting dump during creation of Service Entry Sheet using the 'BAPI_ENTRYSHEET_CREATE' when triggering it from Portal end. But if I directly call the FM from ECC6.0 with the same passing values it gives me the success meassage. The dump only occurs when I am triggering it from Portal via another custom RFC funtion module.
I have checked in ST22 and the message text is like ....." Exception condition "GUI_NO_MODE_AVAILABLE" raised."
Also have checked the SAP Note1271652 and have suggested to apply kernel patch 184. But kernel patch 185 already been applied as our basis team have confirmed. Can you please help me out of this situaion.
Thanks & Regards,
ApurbaHi,
I came across this issue and have blogged a solution that gets round it for our purposes. This may help:
http://community.altiusconsulting.com/blogs/adamadshead/archive/2009/09/24/bex-analyzer-s-file-upload-bug-when-integrated-with-sap-portal.aspx
Regards,
Adam -
Short dump error when extracting delta records from R/3
I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelledHi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings, -
RFC call from portal gives dump call_function_open_error
Hi all ,
We have a RFC function module where standarad BAPI BAPI_ENTRY_SHEET_CREATE IS USED
where a dump call_function_open_error occurs when the rfc is called from portal , while on r3 it works fine.
I wanted to know if somebody has faced this kind of problem anytime and what can be the possible solution .
There is no problem with data , there is no problem with RFC where can be the problem ?
Please suggest >Hi Bhanu,
Can be helpful
too many dumps in production Env: CALL_FUNCTION_OPEN_ERROR -
Error: Could not read Metadata from Portal Database !
Hi All!
My problem is when i am trying to open the portal page (Oracle 10G)
http://domain/portal/page?_pageid=6,1,6_13&_dad=portal&_schema=PORTAL
then i have an Error: Could not read Metadata from Portal Database.
And i do not know why because everything is up and running. I can connect and browse my database schema with portal user. I can connect to pls/orasso and where ever i want.
[07/Feb/2006:00:57:23 +0100] "GET /pls/portal/htp.p?cbuf=Test HTTP/1.1" 200 5
plz help i am trying to fix this in the last 2 weeks :)
thx kEndEHi Andreas,
I've changed the permissions to 775 and changed the ownership of /sapcd (volume name) to orasid:dba (including all files within the staging area /sapcd/ora-patch).
So the permissions and ownership seems to be fine.
I've also ran your suggested commands but the issue still exists.
I'm now liasing with our UNIX guy to check if there is any underlying permission issues on the volume (sapcd) that may be causing this problem.
In the mean time, let me know if you have any further thoughts.
Thanks,
Chris -
Error in DMS while accessing from portal
Hi Experts,
Iam getting the below error in portal while accessing the dms repository. the repository was fine status is in green color
but still getting the error while iam viewing it from content administration > kmcontent> my repository name
what should i do please help me in this
com.sap.netweaver.bc.rf.common.exception.IOOperationFailedException: Connection Failed: Connection setup failedConnection Failed: Nested Exception. Failed to get connection. Please contact your admin.
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.openConnection(DMSRMR3FunctionCalls.java:5934)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMR3FunctionCalls.getTopLevelFolders(DMSRMR3FunctionCalls.java:426)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.refreshChildren(DMSRMStructure.java:531)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMStructure.getChildren(DMSRMStructure.java:574)
at com.sap.pct.plm.dmsrmconnectorforkm.DMSRMMutableNamespaceManager.findResources(DMSRMMutableNamespaceManager.java:930)
at com.sapportals.wcm.repository.CollectionImpl2.internalGetChildrenManager(CollectionImpl2.java:310)
at com.sapportals.wcm.repository.CollectionImpl.internalGetChildren(CollectionImpl.java:1616)
at com.sapportals.wcm.repository.CollectionImpl.doGetChildren(CollectionImpl.java:145)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:125)
at com.sapportals.wcm.repository.CollectionImpl.getChildren(CollectionImpl.java:358)
at com.sapportals.wcm.service.resourcelistfilter.cm.ResourceListFilter.getChildren(ResourceListFilter.java:420)
at com.sapportals.wcm.rendering.collection.AbstractRendererStatus.initialfilter(AbstractRendererStatus.java:331)
at com.s...
Please help me in this .............
waiting for your responses.....
Thanks & Regards,
Shilpa.Dear
You will have to create one System for R/3 Server Access, Once you have created that you will have to maintain User mapping for System Access for each individual users, who want to access the DMS Documents from Portal.
Regards,
Tushar Dave -
Jdeveloper error on downloading resource from portal server from WC Spaces
Hi All,
I am basically from portal area and have now also started using jdeveloper. I have 11.1.1.7 version and am trying to use it for a roundtrip development for my Webcenter Spaces applications.
A problem has been baffling me for last several days. I installed jdeveloper studio edition, then installed updates for Webcenter extensions.
Then tried to configure it for a Roundtrip development with WC Spaces. So I followed the following document.
Extending the Spaces Application Using JDeveloper - 11g Release 1 (11.1.1.7.0)
In doing that I configured the default space application (designwebcenterspaces) and configured properties with the server.
Then I tried following this piece; i.e., downloading a spaces resource directly into jdeveloper.
Extending the Spaces Application Using JDeveloper - 11g Release 1 (11.1.1.7.0)
On trying to do it, I get a pop-up with following error and no specific application or space.
Exception getting resources:null
On my jdeveloper, I see this message accompanying it.
Jul 2, 2013 5:54:21 PM oracle.webcenter.portal.dt.propagation.rest.RESTClient getDocument
WARNING: null
Jul 2, 2013 5:55:21 PM oracle.webcenter.portal.dt.propagation.dialogs.DownloadPanel populateResourceNames
WARNING: Exception getting resources:null
Can someone please help me fix this problem?
Thanks a lot.Recheck the below ones,
Be sure the configuration properties and permissions are set properly, as described in Section 55.3.3, "Enabling Direct Uploads to the Spaces Application." See also Section 55.2.3.2, "Setting Build and Deployment Options (config.properties)."
and make sure server is up and running -
SAP SRM error when debugging from Portal
Hi,
I have put an external debugging point in the backend SRM system and trying to process the Shopping cart from portal. It is giving an error message at the statement where I have put the debug point.
The error message which I get in st22 is:
The ITS service "bbpsc02" failed since not template could be found for
the screen with the number 131 in the program "SAPMSSY3".
The template was searched in the following ITS services:
"BBPSC01"
Note that for language-dependent templates the language is included
in the search.
Could you please tell me what should I do for enabling teh debugging from the portal.
Regards,
Ravi G
Edited by: Ravi Kumar Gunda on Jul 21, 2009 5:32 PMHi,
There is an error in the publishing of template
Template :"bbpsc02" is not publised in ITS.
Go to T.code: SE80
Publish all the templates again and check
Check with your SAP BASIS team for the help
Regards
Ganesh
Maybe you are looking for
-
I have a MacBook Pro with Snow Leopard. After connecting my HP Photosmart D110 to it, the printer works but the scanner doesn't. The message is"The scan cannot be performed because another program has control of the HP imaging device". Can anyone hel
-
[SOLVED] KDE 4.3 (not kdemod) dont run after login in KDM
Hi! I've not been using kde for a while, but now I decided to install new release (4.3). But I can't start it. I start KDM, press login, it starts loading kde (one icon of hard drive appears) and it falls back to console with this message in /var/log
-
I'm Admin but still i'm unable to change search address from my internet Explorer?
Hello! Genius people. Can you pleases help me to remove this annoying web links from my browser. I'm admin of my computer but i don't know how to change setting for internet explorer from admin access. Actually my computer got virus name Arbyaonline.
-
Hi, Is it possible to sort a report based not just on databse columns but on function and summary columns in Reports? tnx Ivan
-
Handling the LOV Click event in ProcessFormRequest
Hi , We have a requirement to display certain messageStyledText values in the header region based on the value selected in LOV. I am trying to handle the LOV click event in ProcessFormRequest method by checking if the event is lovUpdate or lovValidat