PP order date issue

Hi PP Gurus,
Iam creating production order via T-code CO01 and have 3 operation in the production order. In the routing the leadtimes in maintained for each operation like 15 days.The schedule type is forward scheduling.
When i create production order the order scheduled date is calculating accroding to the lead time maintained in the routing. But the finish date is always one day difference from the scheduled date.
If i create production via MD04 system will consider the plan in house time in the MRP view 2 and calculate the basic finish date but we are creating manaully.
Pl advice why this one day difference
Thanks in Advance
Kumar

Hi,
The production order scheduled finish date is 28.07.2008 Time is 04:00 and the Basic finish date is 29.07.2008 Time is 00:00.
These both dates are same.
Because 28.07.2008 finishing time is 04:00. From 04:00 to 24:00 time is available in 28.07.08. But system can not use this time. If you want to use this time manually you have to adjust capacity by CM21.
Basic finish date is 29.07.2008 Time 00:00 is equal to 28.07.08 time 24:00
I hope you understood.
Regards,
Dharma

Similar Messages

Purchase orders dates issue

Hi All,
Somehow MRP Pushing the dates to future date i.e to year 2015. Even though the dates changed manually after an MRP run it changing back to year 2015.
Please advise, how to approach to solve my issue.
Thanks in advance.
Quantum.

I'm not sure what your question is, but MRP will not change automatically a firmed element, e.g. purchase order, or a firmed purchase requisition.
Could you clarify?

Regarding Goods issue date and order date.

Hi All,
Could you please tell me from where we can fetch Goods issue date and Order date.
Waiting for your reply.

Preeti,
Goods issue date/order date of what ?
Goods can be issued in a number of ways, in reference to many types of documents. In each case, the GI date and order date are found in different places.
Please elaborate your request.
Best Regards,
DB49

Sequencing of Purchase order and Good Issue acc. to Production order date

Hello ,
We are using Direct procurement scenario ,During MRP run we generate a Plan order(which have dates); which converted into Production order later.For these production order material is needed (components). And for procuring components we need to create purchase order.
Assumption :- Each component have same Procurement lead time
Our requirement is Purchase order and GI in Production order should be done sequentially, means Based on Production order date ,FIFO based Purchase orders are created and GI done in Production order. Production order with earlier production date have purchase orders earlier and we do GI in production order accordingly.
Kindly suggest

Hello Dario
Thanks for your reply. Our requirement is to put a check on system that GI for production order should be done FIFO wise
means as MRP generate 3 production order of same material each at different date , we want issance of components to be done on FIFO wise in production order
Regards
Rajeev

Issue about planned order date of ROH.

Hi Experts,
In MD04 , system is displaying planned order date of ROH after the planned order date of FERT i.e., for FERT---- planned order date is 21/01/2009 But for ROH -
planned order date is 23/01/2009.
can anyone tell me y its happening here.
regards,
sap pp
Edited by: sap pp on Jan 22, 2009 11:42 AM

Dear,
Go to the BOM of FERT and check the in component details and check Lead-time offset. Make it blank
In OPU3 and OPU5 Adjust dates in lead time scheduling should = 1 Adjust basic dates to order start date.
Then run the MRP in MD02 with planning mode 3 deleted and recreated and check your result.
Regards,
R.Brahmankar

Custom report -Mb51 -EBELN,AUFNR,KDAUF & KUNNR -Data issues

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Hi,
This custom report is related to material document list (MB51).
I was trying to retrieve Purchase Order(EBELN),Order number(AUFNR),Sales order(KDAUF) & Ship-to-party( KUNNR) from MSEG & MKPF.
Unfortunately
It looks like for Sales Orders, it picks up the Customer Number but no Order Number. For STOs, it looks like it picks up the STO # but no Customer #.
How to over come this?
FYI..I also tried adding fields to standard report(MB51) and it is also doing the same manner .
Am I pulling it from Wrong tables? or is it related to DATA issues?
Regards
Praveen
Message was edited by:
PRAVEEN s

Additional field in the sales order header Purchase Order Data tab

Hi,
I want to add an additional field in the below screen:
VAO1 > Go to > Header > Purchase Order Data >
Under Sold to party section i want to add an additional field.
Is this possible through configuration?
Please let me know.
Thanks in advance
Edited by: Kase on Dec 20, 2011 7:06 AM

Hi Kase,
Check this below link it might be helpful for your issue
sales order - Additional data B
new fields in sales order
Regards
Pradeep

Warning messages for purchage order date?

Hi Friends,
I am ABAP developer, and I am developing one webservice to create value contract from dotnet front end,
So user can enter inputs from that front end and he will get SAP generated value contract id.
Here I did validations for all the fields and giving error messages to restrict user to dont give incorrect values.
Now coming to my issue..,
While entering the PO Date in the initial screen of contract creation,
If I enter future date,
> The purchase order date lies in the future. Please check
If I enter the past date.,
> The purchase order date is in the past. Please check
I will get warning messages like this, so what should i do, I can enter, today's date to avoid these messages,
And I can neglect these two messages to proceed, as they are warings only.
But in my case , Can i process these messages to front end, Is it mandatory.
I want to know the intention of these messages, then i can proceed.
Thanks,
Naveen.I

Hi,
It is telling an information about the date status and n=it is not an error message.
so you can go ahead with this message.
If you want the same message in front end then you can write the logic in the dotnet prog.
Regards,
Sumith

Purchase Order date vs Invoice date

Hi to all.
In our system we run t-code me21n to create purchase order and later on we run t-code MIRO, MIR7 etc. to post incoming invoice. My question is how do I prevent system from letting end users enter invoice date that has earlier date than purchase order? Let's say purchase order was created on December 3-rd, but end users enter as an "invoice date" in the t-code MIRO December 2-nd and system lets it go through, not even warning message. What I want to accomplish is to create "E" message and not let end-users enter invoice date earlier than purchase order date.
Help is sincerely appreciated.
Regards,
Nazim
Edited by: Nazim Gasimzade on Dec 4, 2008 3:32 PM
Edited by: Nazim Gasimzade on Dec 4, 2008 3:35 PM

Thanks for your reply.
Our R3 system is designed for government funded organizations. The issue is that government funded organizations are not supposed to have PO entered in the system until they are provided with funds which are quite often get delayed because of all the paper work that has to take place. Suppliers know about it and quite often they supply goods to budget organizations even before PO are in place. Once the budget organization receives the funds that they can spend, they enter PO details and invoice details but it turns out that invoice date is earlier than PO date. At very least we would like to have our system give a "W" message.
Regards,
Nazim

Regarding LSMW -- Purchase Order Data

Hi Friends,
I have one requirement i.e purchase order data need to be upload through LSMW via Direct input method.
=============
pls find the belwo flat file structure
old_PO           material            price            qty
P123              M111                  10               1
P123              M222                  10                1
P123              M333                  20               1
===============
Normally if I upload same data into SAP, it will create three purchase orders with different SAP numbers.
I want if old_PO number is matches with the previous record all the materials should be in single transaction and single Purchase order should be created.
Can any body help how to resolve this issue. This is very urgent.
pls explain in detail. I am using LSMW. I don't have no other option.
=====
please don't post any junk amswers.
=====
Thanks in advance

Hi Raghunath,
Don't think that this reply is junk one.I cannot explain you in detail but try like this.
In the fifth step of LSMW,You can find Global data definitions & Processing times.
In any of these you can just fetch the values from database with reference to flat file data like..
select PO from ...where PO = source-PO.
if sy-subrc EQ 0.
skip_transaction. Using this function you can skip this record
endif.
Award points if useful.
Thanks,
Ravee..

Custom Order Data Workflow

I am trying to get a comprehensive export of all my Order data (from Adobe Business Catalyst to CSV) to facilitate offline transactions with with my client's fulfillment vendor. Several issues are popping up and I wanted to know my options for each. Any assistance would be greatly appreciated.
Issue 1: Custom fileds present in my Online Shop Purchase Form are not accessible when viewing the Order data in the dashboard. These custom fields show in the Workflow Confirmation email, but not the Orders, so it would appear the only place they are saved is the Workflow Confirmation email (and not the system). Is this accurate? If so, can they be forced to save into the system and be viewable from within Orders via the dashboard?
Issue 2: When exporting Orders from within the dashboard, it seemd that only the top line summary info is exported. My client would like to have a complete record of all order data including custom fields available as an export option out of the dashboard. Can the export CSV data be customized? If not, can this service be purchased through Adobe or a third party?
Thanks in advance,
Ken

Are you calling wf_engine.completeactivity() WF API on which activity 1)DF_SCHEDULE_ELIGIBLE OR 2) DF_LINE_SCHEDULING ??
Try calling wf_engine.completeactivity() for DF_SCHEDULE_ELIGIBLE activity.
I created custom workflow processes in Order Management module. I am using wf_engine.completeactivity() to complete activity programmatically and then to proceed to next process in the workflow. Its working like a charm !! You can send me email if you have any questions.
Good Luck.
null

Purchase order data for ATP category BH and BI not retrieved

Hi Experts,
I have a requirement where I need to extract purchase orders data from the bapi BAPI_POSRVAPS_GETLIST3. I am passing the locations, products and ATP categories AG,EF,BF,BI and BH. However, my bapi works correctly for AG,EF and BF, but it does not retrieve the data for BI and BH categories.
I have debugged the bapi and found that it is unable to retrieve data from the live cache.
Can anybody please help me out and let me know the exact reason for this issue? I have checked the return table of the bapi and it does not give any error message as well.
Looking forward to your reply.
Thanks in advance.
--Warm Regards,
Prajakta K.

Hi,
BI (stock transport order) and BH (PreqRel) are demand elements for which there exist corresponding receipt element as BF (Purchase order) and AG (Preq) respectively. BAPI will give data for these categories.Thus you can get data for BI and BH from corresponding BF and AG.
Similarly EF (Dep:Preq) is receipt element and you will not get data for corresponding demand element which is available in the system as EG (Dep:ConRel).
I think BAPI is working fine.
Regards,
~Vaibhav

Order data Structure in BAPI_PRODORD_CREATE Function module

Dear Sir,
I am using the function code ' BAPI_PRODORD_CREATE ' to create a number of production order from the data reside in the tab delimited file in the system. i am not able to pass the structure order data to this function module , there is a error CALL_FUNCTION_CONFLICT_LENG ' error. what will be the format of the structure.
I want to create production order from the list in excel file . I have only material code , production plant , order type , quantity as input.
regards,
Kapil.

Please update the issue.

Error when activating Order Data Type ORDR

Hi all
We were activating all the ODM components acc to note 1178483 and got the following error when trying to activate Order Data Type ORDR:
Parameter CONFSTAT in access path TSTP of order data type ORDR unknown (/SCMB/ODM_ORDTYPE043)
Do any of you know what is triggering this error?
In order to carry on we removed the CONFSTAT entry and were then able to activate ORDR afterwards. However, we would like to know what the consequences are (if any) of this action.
Thank you in advance.
Best regards,
Dan Bruun

Hello Dan,
First of all you should not remove any SAP standard entry (without advice of any experts.) so now you won't get any support from SAP for this issue.
ODM activation require for creation of tables(which stores transactional data) in each client.
CONFSTAT is a field in /1OM/ORDROEHD<Your_client_number> table which stores data about PO/RO confirmation status.
You got this error because of ODM component OEHD was not activated properly.(Even it shows warning/error while component activation but it is not activated properly).
As you have removed CONFSTAT entry system won't behave normally for PO/RO creation/change/confirmation.
What you can do now restore your back-up before deletion of this entry try to do ODM activation again if you still get error then try to do force ODM activation(transaction code:/N/SCMB/ODM_GEN_ORC also checked Force Genration check box).
Even after force generation of ODM gives you error raised an OSS with SAP support for resolution.
Regards,
Nikhil

LOCID is not defiend for Order data type ORDR

Dear All,
I am trying to load data in to Order forecast details in Dynamic
replenishment of SNC in the WEB UI, after entering the Product and
Customer location, when I clicked on GO system is giving the below
error.
Time series error in class /SCF/CL_ICHDM_DEMANDMN_DATAAXS
method /SCF/IF_ICHDMAXS_2_CNTL~SELECT
Access error for time series type DFC01, key figure CORDEROR, ODM
message: Parameter LOCID is not define for order data type ORDR
Could you please help me out what to do in this case.
I have re activated the following components mentioned, still system is
giving the above problem.
Activate Order Component
Activate Order Data Type
Activate Order Data Area
and
Activate Time Series Data Type
Activate Time Series Data Area
Thanks and Regards,
T.Muthyalappa

Hi,
Make sure you have proper authorization.(sometime system does not display the error but user don't have authorization to create/update/modify table entries to be on safer side assign SAP_ALL profile to your ID if it is allowed as per your company security process).
I think issue is with InfoObject 9ALOCID is not activated properly.
You need activate InfoObject 9ALOCID as mention i below step2 but it is better you follow below steps.
1) Then force generate ODM.
2)Go to transaction code:/N/SCA/TSDM09 enter time series DFC01 and select Radio button Activate Planning object Structure.
Regards,
Nikhil.

PP order date issue

Similar Messages

Maybe you are looking for