[PPC] base not found????

First time I have tried Arch on a friends old imac G3 slot cd machine.
I can navigate through the install to the point where it tells me I am going to install packages then I get a dialogue saying:
error: "base": not found in sync db
base package not found, searching for group...
Package installation failed
H/D was setup by auto-install so that should be OK
What's going on?
Moderator edit: make sure people know what architecture you are installing on and post in the appropriate subforum, thanks
Last edited by .:B:. (2010-07-23 17:46:31)

dede468 wrote:I'm setting it up from the cd - haven't tried the network install. Having the cd in hand, I hadn't given it a thought to be honest.
That's why you're getting the db error, but according to Wikipedia, you have a PPC-type processor so I would surprised if regular Arch runs on it.
Maybe you should try http://www.archlinuxppc.org/
Last edited by karol (2010-07-23 16:47:38)

Similar Messages

  • Base not found if 10mbps

    hi, I've the last AP Extreme firmware and an home network with:
    - 2 pc with XP connected via ethernet at APExtreme
    - 1 macbook with 10.5.3 connected via wifi at APE
    - 1 laptop with XP connected via wifi at APE
    the problem is:
    my 2 laptops (mac and pc) are connected without any problems to the APE
    my 2 pc doesn't see the APE and doesn't get any ip if I set their ethernet card to Auto-Negotiating or 100mbps full duplex or 100mbps half duplex.
    If I set the cards to 10mbps full duplex they find immediatly the APE and I can get into the web.
    the WAN port of the APE is set to Auto.
    Why I can't use the 100mbps speed for communicate INSIDE my home network? (outside depends of my connection, obiouvsly).
    my cards have different brand, so I think it's not a card/drivers problem....
    thanks
    (and sorry for my bad english)

    What kind of cables are you using between your PC and the AEBS? You need at least CAT5 cabling for 100 Mbps.
    The WAN port setting has nothing to do with your other Ethernet port speeds.

  • The definition of base class Application was not found.

    Hello:
    I have been coding in Flash Builder Burrito and publishing to my Xoom for a few weeks. All of a sudden at the end of the day I'm getting this compiler error which says:
    1017: The definition of base class Application was not found.    AppName.mxml    /AppName/src    Unknown    Flex Problem
    I sometimes hit the wrong key with I try to copy and paste and all of a sudden a new window will open for source of a default component which I never wanted to edit. I'm afraid I somehow deleted or modified the default class defnition of Application?
    I don't understand why this would come out of the blue, I was working on a function within a class that was drawing points  ... Then all off a sudden I'm getting this error and it's driving me nuts.
    I tried to reinstall FB Burrito on my Mac, but after all that work it still says the same thing. Wouldn't it replace the default class defs?
    Please help!

    Wow, some really strange behavior.
    OK, so here is what I'm going through. I reinstall, import the project and compiles.
    Then I uncomment the new section which contains the following code:
    lineStyle(1.0,0x8ea4bf);
    var line_commands:Vector.<int> = new Vector.<int>();
    line_commands.push(GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO, GraphicsPathCommand.LINE_TO);
    var line_coord:Vector.<Number> = new Vector.<Number>();
    line_coord.push(0,0, newW, angle, newW, (newH+angle), 0, newH);
    drawPath(line_commands, line_coord);
    I get 3 diffrent errors, which lead up to the error listed in the topic.
    At first it says that "int" isn't a valid type and it points to this line:
    var line_commands:Vector.<int> = new Vector.<int>();
    Then I take int out so the line looks like this:
    var line_commands:Vector = new Vector();
    Then it says I can't nest classes and it points to the main MXML. I go to the main MXML then the error switches to say "The definition of base class Application was not found.".
    I did figure out how to fix this with out reinstalling. I have to delete the project from my list (making sure to comment out the code above), then re-launch FB Burrito, then re-import the project and it works.
    This is way nuts! I dont understand ... am I crazy?

  • Getting Error base class BitmapAsset was not found

    I am converting a project using Away3D boomstick to the new FL11 version. I have installed the 4.5.1 SDK, dropped in the new away3d classes, added the flashplayer11_b1_playerglobal_071311.swc and now I get the following error.
    Description Resource Path Location Type
    1017: The definition of base class BitmapAsset was not found. Mercer-Molehill line 10 Flex Problem
    Any Ideas? I really need to get this working for a demo tomorrow.

    It seem the right playergloblal is not accessed. If You compile in Flash IDE make sure that ActionsScript Settinng is configure with the rigth paths.
    The SDK 4,5 has change the name of flex.swc to core.swc and others files.
    Flex 4.5 Framework Differences
    flex.swc and utilities.swc were renamed to core.swc and authoringsupport.swc
    The datavisualization.swc was split into charts.swc and advancedgrids.swc.
    Path to sdk
    I put all those SWC in a folder in C:\Program Files (x86)\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\flex_sdk\4.5\
    Flash Actionscript  settings. -> library path ->add the path till sdk
    Configure globalplayer.swc. in Flash
    in Common-Configuration/Player created a copy of FlashPlayer10_3.xml to FlashPlayer11.xml.
    <player id="FlashPlayer11" version="12" asversion="3">
       <name>Flash Player 11</name>
    Finally
    Flash Actionscript  settings. -> library path ->add path till globalplayer
    it work for me. ( tell me if I done wrong please).

  • Definition of base class _ not found

    Hi there!
    While exploring Flex 3 (really neat btw) and building my
    first app, I tried the following:
    public class X extends EventDispatcher {}
    This gives me a compile time error #1017: The definition of
    the base class EventDispatcher was not found.
    To compile I am simply use a .bat file, such as those used in
    the samples. Everything compiles normally without extending an
    existing class (in this case flash.events.EventDispatcher).
    Trying to change the compiler options with
    -library-path+=c:\flex\framework\libs
    resulted in the same error here (and I guess that's already a
    default setting).
    Any help would be greatly appreciated!
    Fre

    That worked :-). Thanks a lot, Deepa!
    So apparently you can make import statements below the class
    declaration (or anywhere in the code), but always before you are
    using the imported class. I got confused, as in java all import
    statements are in one place and the flash.net imports worked below
    my class declaration.

  • Definition of base class ByteArrayAsset was not found

    I was able to run through the developer guide to get several simple applications going, but I'm getting stuck when trying to compile a game (using amxmlc) that uses Flex-style embeds to embed bitmap graphics.
    The error I'm seeing is this: (I've included input for completeness. I am located inside the project directory.)
    ===
    > ../flex/bin/amxmlc -default-size 320 480 -library-path engine.swc -source-path+=.  -- scripts/Main.as
    Loading configuration file /Users/jon/Desktop/iphone/flex/frameworks/air-config.xml
    scripts/MyAssets_SceneList.as(10): col: 49 Error: The definition of base class ByteArrayAsset was not found.
    (Repeats 10 times)
    ===
    As directed in the guide, I downloaded the latest Flex SDK and dragged in the contents of the iPhone packager directory. And to reiterate, I was able to get several simple applications working on my iPad, so my setup should be correct.
    Where have I gone wrong?

    I've narrowed it down further. Emebds DO work, but it's particularly an embed that leads to a ByteArrayAsset that does not. In my case, I am embedding an XML file as an octet stream.
    Any ideas? Thanks!

  • Help - error: 1017: The definition of base class CairngormEvent was not found.

    Hi.
    I've inherited someone else's flex code.  I need to make a small change re-complie and re-deploy, but the IDE (flash builder 4) keeps telling me there's an error in one of the.as files.  Here's the details:
    = Error:
    1017: The definition of base class CairngormEvent was not found.   
    = Code:
    package actionScripts.events {
        import flash.events.Event;
        import com.adobe.cairngorm.control.CairngormEvent;
        public class CairngormGeneralEvent extends CairngormEvent {    
         [etc..]
    Any ideas?
    I'm using Flash Builder 4. Any help would be much appreciated.

    check if the Cairngorm.swc is in the libs folder

  • Error target not found base-level failed to install the packages

    Im trying to install arch on my Virtualbox VM and its just returning:
    error target not found base-level failed to install the packages to new root
    What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

    Please read the following and follow the advice included:
    https://bbs.archlinux.org/viewtopic.php?id=57855
    With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command.  If it was in your original command, that would explain your results.

  • Base table not found

    CF5 Newbie needs help.
    I am trying to create a webpage with a searchable access
    database that displays photos.
    I am getting the message ODBC Error Code = S0002 (Base table
    not found). I have verified my database.
    Maybe there is a problem with one of my initial files. I have
    the search, results and details querry set up am I missing an
    additional file here that would cause this problem?
    Thanks -any help is greatly appreciated,
    Jen

    Hi,
    pPerhaps one should explain some basics about privileges in the database.
    You connected as sysdba, named superdba.
    The table(s) you are looking for have been created by the user SAPAJ4DB.
    If a user creates a table, noone !!, really noone is allowed to select them except this owner.
    Not even the sysdba is allowed to select them.
    And it is good that it is like this. I personally do have some private info in tables and do NOT
    want to let them being seen by my boss being the sysdba of the db.
    If the owner wants to allow access to this table, he has to grant privileges to other users.
    There are select, insert, update, delete ( to name the DML-privileges ).
    If the owner of the table you are looking for, did not do this, the sysdba is not allow to see them.
    And then he will receive the error -4004.
    Yes, the table DOES exist. But for the user not having a privileges for this table,
    this table looks like not existing, causing this error to occur.
    Therefore: connect as the owner, select there what you want.
    And then think about your needs and grant the corresponding privileges to other users / the sysdba.
    Have a nice weekend,
      Elke

  • In firefox 12 in page source code all links 404 not found! base tag ignored!

    in firefox 12 in page source code all links 404 not found! base tag ignored!

    I filed bug 757348 for you:
    https://bugzilla.mozilla.org/show_bug.cgi?id=757348
    If you want to be notified about changes, please add yourself to the CC list of the bug by creating a new bugzilla account: http://bugzilla.mozilla.org/createaccount.cgi
    Then go to the bug page shown above and hit 'Save changes' in order to add yourself to the CC list.
    --Tobbi

  • [PPC] new install fails to boot: root partition not found

    Hi,
    new ArchPPC installation on a iMac G3. It does not boot further than initramfs because root partition is not found. I get something like:
    Root device /dev/sda4 doesn't exist
    Attempting to created it
    ERROR: unable to determine major/minor number of root device /dev/sda4
    then I get a dropbox recovery console but keyboard doesn't work.
    I chroot in the installed system to change mkinicpio pata hook to ide, regenerated initramfs but that didn't help.
    Any guidance to diagnose and solve this issue would be greatly appreciated.

    Hi, sorry I just realized you replied to my thread.
    I don't have my mac at the moment, but I must have done something like :
    - boot the live CD
    - get the output of lsmod
    - copy this output to mkinitcpio.conf (the one that's on your HD), remove the autodetect hook
    - chroot into your HD setup
    - regenerate initramfs
    - update yaboot (is this really mandatory?)
    - exit chroot and reboot.

  • DroldF.dat not found

    Hi,
    I try to install the following code
    CREATE INDEX IDF_FULL on ECOLORF.INDEXATION(FICHIER)
    INDEXTYPE IS ctxsys.context
    PARAMETERS
    ('datastore CTXSYS.FILE_DATASTORE
    LANGUAGE COLUMN LANGUE
    LEXER mylex
    FORMAT COLUMN FORMAT
    WORDLIST DEFAULT_WORDLIST
    STOPLIST multistop
    MEMORY 2M SYNC (EVERY "SYSDATE + 1/24/6")');
    and I have the error :
    DRG-11446: fichier de base de connaissances fourni C:\oracle\product\10.2.0\db_1\ctx\data\frlx\droldF.dat non installé
    +(file droldF.dat not found)+
    (Same thing with an Oracle 11g on another server)
    When removing 'LEXER mylex' in the create index, it's OK, but I have some difficulties with the french accents.
    The only file in the directory xxxxx\db_1\ctx\data\frlx\ is drfr.is
    On [this forum|http://kb.dbatoolz.com/tp/2796.drg-11446_droldusdat_not_installed.html] , it is told that the missing files are on companion CD in stage/Components/oracle.cartridges.context.knowbase/10.1.0.2.0/1/DataFiles/data.jar, but only iin the R1 release (not the R2)
    But I can't find this companion CD. Where are they in OTN ? How to download old versions ?
    Or more simply : who have all these files droldF.dat, droldUS.dat and can furnish them ?
    Best regards

    Your lexer definition presumably includes INDEX_THEMES = YES.
    If you change that it will work. Otherwise you need to download the database examples for 11g, which include the knowledge base.
    Sometimes can be tricky to find - if you download the full set of files it should include the examples.

  • APEX Listener 2.0 - RESTful Services Failure with  404 - Not Found

    Versions used:
    * APEX Listener 2.0.0.354.17.05
    * Application Express 4.2.1.00.08
    * Oracle Database 11.2.0.1
    When testing the sample RESTful Service Module oracle.example.hr I always get 404 - Not Found page.
    I followed the documentation to install and configure APEX 4.2 and the Listener 2.0. Everything in my APEX installation works fine except RESTful Services.
    For example, when calling this RESTful Service:
    http://company.com:45678/apex/DEV/xxuapex/hr/empinfo/
    I get a 404 page.
    The corresponding entry in url-mapping.xml is:
    <pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
    where xxuapex is the name of the schema as well as the workspace where the RESTful Service is installed.
    Moreover, the corresponding od01.xml, od01_rt.xml and od01_al.xml in the conf directory seem correct.
    Any help is greatly appreciated.
    Thanks.
    Eddie Awad.

    Hi Eddie,
    +> try the other option base-url of the url-mapping+
    I did. No change. Still getting 404.When active it should transform the 404 page into a detailed 404 with a description of what the error is. Just to be sure, this is activated in the defaults.xml file of the APEX Listener as: *<entry key="log.logging">true</entry>*.
    You should then see a detailed 404 output in your browser of what's going wrong first of all.
    +> Could you post your url-mapping.xml file?+
    <?xml version="1.0" encoding="UTF-8"?>
    <pool-config xmlns="http://xmlns.oracle.com/apex/pool-config">
    <pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
    <pool base-path="/TEST" name="ot01" workspace-id="xxuapex"/>
    </pool-config>
    Despite using the url mapping script, it didn't map mine correctly and had to edit it manually. It was the use of "apex" that got it to work for me:
    *<pool base-path="/" name="apex" workspace-id="workspace-name-here" updated="2013-01-09T20:48:59.75Z"/>*
    Nick.

  • This application has failed to start because SapNi.dll was not found

    On the advice, good advice, of Melanie and Lars, here is a new thread for my question.
    I'm assisting with a migration of SAPDB, on Windows Server 2003, to MaxDB 7.6.xx on Solaris 10 SPARC.
    I can connect to my SAP DB 7.3.0.35 using Database Manager 7.4.3.23 as superdba. Now I'm trying to use the dbmcli.
    I go to the server and pop open a cmd prompt and try it via dbmcli:
    dbmcli -d sdb -u superdba,<password>
    And I get a Windows dialog box that says
    This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem. 
    Hello,
    actually, the SUPERDBA user only has ONE valid password. Although he is able to perform admin tasks and to execute SQL statements, there are not two passwords for this user!
    So if you are able to connect with that user with dbmcli and not with sqlcli or loadercli, there seems to be something wrong with your system/users. Maybe the user called SUPERDBA on your system is not really the SYSDBA but a 'normal' dbm user.
    When you connect with that user with dbmcli, please execute the following commands:
    sql_execute select user from dual
    sql_execute select SYSDBA from dual
    sql_execute select * from users
    Can you also connect with user control with dbmcli? You might want to check the default password (control).
    Regarding the ni.dll problem: If I understand that correctly, you installed Database Studio locally on your PC. Did you also install any othe MaxDB software on that server? When you try to use dbmcli to connect to a remote database, you'll have to specify the -n <hostname> option. Or did you get that dll error on the database server itself?
    Database Studio cannot be used to administer databases of version 7.3. You'll have to use DBMGUI or dbmcli for that.
    Best regards, Melanie
    Hi Melanie, Thanks for the response.
    I cannot use dbmcli at the moment. I get the Windows dialog box saying
    This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem.
    I am using dmcli on the Windows 2003 Server with my SAP DB 7.3 installed. Here is the version of dbmcli that I'm using.
    C:\sapdb\SDB\db\bin>dbmcli -V
    OK
    version,os,dbroot,logon,code,swap
    "7.6.06","WIN32","C:\Program Files\sdb\7606",True,ASCII,2
    I'm going to try to do what the error message tells me and uninstall and re-install my DB management applications.
    Thanks,
    Rich

    Server Utilities           c:/sapdb/programs                             7.7.06.09     32 bit    valid
    DB Analyzer                c:/sapdb/programs                             7.6.06.03     32 bit    valid
    PCR 7300                   c:/sapdb/programs                             7.3.00.35               valid
    PCR 7301                   c:/sapdb/programs                             7.3.01.09               valid
    PCR 7104                   c:/sapdb/programs                             7.1.04.43               valid
    MaxDB PHP Driver           c:/sapdb/programs                             7.6.06.03     32 bit    valid
    PCR 7240                   c:/sapdb/programs                             7.2.04.17               valid
    Synchronization Manager    c:/sapdb/programs                             7.6.06.03               valid
    Base                       c:/sapdb/programs                             7.7.06.09     32 bit    valid
    Redist Python              c:/sapdb/programs                             7.6.06.03     32 bit    valid
    JDBC                       c:/sapdb/programs                             7.6.05.06               valid
    Messages                   c:/sapdb/programs                             MSG 0.8215              valid
    ODBC                       c:/sapdb/programs                             7.6.06.03     32 bit    valid
    Database Kernel            c:/program files/sdb/7606                     7.6.06.03     32 bit    valid
    Database Kernel            c:/sapdb/programs/databasestudio/utilities    7.7.6.9                 valid
    Database Kernel            c:/sapdb/sdb/db                               7.3.00.35     32 bit    valid
    Loader                     c:/sapdb/programs                             7.6.06.03     32 bit    valid
    SQLDBC                     c:/sapdb/programs                             7.6.06.03     32 bit    valid
    PCR 7250                   c:/sapdb/programs                             7.2.05.24               valid
    xinstinfo
    IndepData           : C:\sapdb\data
    IndepPrograms       : C:\sapdb\programs
    dbmcli -s dbm_version
    OK
    VERSION    = 7.7.06
    BUILD      = DBMServer 7.7.06   Build 009-123-202-944
    OS         = WIN32
    INSTROOT   =
    LOGON      = True
    CODE       = UTF8
    SWAP       = full
    UNICODE    = YES
    INSTANCE   = (unknown)
    SYSNAME    = Windows Server 2003 family
    MASKING    = YES
    REPLYTREATMENT = none,zlib,auto
    SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
    Edited by: Rich Evans on Jun 16, 2009 4:13 PM

  • My i tunes is not working anymore. it says the application failed to start because MSVCR80.dll was not found. I have tried re-installing the program but it doesn't work.

    Hello,
    Yesterday I tried to get onto iTunes and was unable to. I keep getting this message:
    Itunes.exe - Unable to locate component.
    This application has failed to start because MSVCR80.dll was not found.
    Re-installing the application may fix this problem.
    I have tried to uninstall and re-install the program several times but cannot get it to work. Now I get this message:
    iTunes was not installed correctly. Please reinstall iTunes.
    Error 7 (Windows error 126)
    I have tried to do what I can but am not really iTunes savy and would like to get this issue resolved. Can anyone help me?
    THANK YOU!!
    Cyn

    Hello there, Cyn.
    The following Knowledge Base article provides some great information for troubleshooting your issue. Keep in mind uninstalling and reinstalling has to be done in a very specific fashion, therefore use the guidelines from this article to accomplish this:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • TIme capsule AND airport express as PRIMARY wireless?

    I have a time capsule, extended the network to AirportExpress but it stinks! I still cannot get good service in that part of the house- and therefore, cannot use my apple TV very well. SO, I have now hardwired the airport express to a new cable modem

  • Line due to go active 24/07/15 but can now call out and in today

    Hey guys, why can i now use my phone line. I have moved from talktalk and sky gave me a new phone number as it was the only way thy could process the order. Today i have tried to dial the new house number they gave me and it works, does tha mean my l

  • Installing BP-INSTASS 600V1 and BP-ERP05 600V7

    Hi All, I have to install BP-INSTASS 600V1 and BP-ERP05 600V7  in our QA and Prod. systems. These components are already in our Dev systems. So, to sync three systemscomponetns, I have to install again on our QA and Prod. These components are not the

  • Off Cycle Payroll - Bonus

    Hi Guru I am facing a Problem in Off Cycle. When I generate Off Cycle Payroll for bonus the Bonus  Wage is not coming in RT table. Bonus related congf is completed but in the display log it s not showing the result bonus this much of amt With Regards

  • JButton not enabling disabling

    Hi, I have a my custome defined Jbutton class say MyJbutton extending JButton in which there are 2 methods like enableButton(); disableButton() when the user calls any of these methods i enable or disbale the button from these methods enableButton()