PPM Integration Model Activation did not send delta change data

Hi all,
I have an integration model of PPM's. I activated the PPM for the initial transfer.
When I create a new prod. version, I created a new version of the model for PPM, above the previous active one.
When I activated the new version of model, the system tried to send all data.
I supposed that the system would only send the changed data, because the previous model is active.
but the system sent all PPM's
and it takes too long.
Would you please answer why does the system react like that and what must we do?
Mehmet

Hi
In order to check what is occuring, in your ERP system look at Table CIF_PPM_CHANGED, this will tell you the Material, Plant and Prod Vers of your PPM,s. It also has a field CHANGED to tell you if any changes have taken place and a field PROCESS, which should be set to "X" if the change has passed over to APO.
Check the values in your table to see if this has been set. It should only send the delta records where there is a value in CHANGED and PROCESS=" ".
Also check to ensure that people are not changing the Bills of Material or Routings etc, as this will also resend the PPM´s.
Regards
Ian

Similar Messages

  • Online Report Server did not send the report data. (Error: BAW 0059)

    Can someone confirm me if we can create an e-mail publication for promt based reports? I was created publications for non-prompt based report and they were successful. But when I create a publiction for an report which has prompt I am gettign the error - Online Report Server did not send the report data. (Error: BAW 0059). Any ideas?
    --Nivas

    I forgot to mention the envionment, which is 6.5.1

  • Activtion of PPM Integration Model does not send any data to APO

    Hi all,
    When I activate my PPM Integration Model, the activation finishs without any error, but no data is being tranfered to APO.
    I do not get any error message to start looking for the problem.
    Thanks and regards,
    LHM

    Hi Luiz,
                  "no data is being transfered to APO" Which data are you looking for?? I am assuming youa re expecting a PPM to be created in APO.
    If so,
    1. Do you see any PPm in /sapapo/scc03?
    2. Check if the pre reqs. for creating PPM as in [Integration of Production Process Models|http://help.sap.com/saphelp_scm50/helpdata/en/8e/d4ef37e9a4ba6ee10000009b38f842/frameset.htm] are satisfied.
    3. make sure to check the inbound APO queue or outbound R/3 queue depending on what you are using.
    4. Also not the time of activation and check CFG1 in R/3 to see if you can get any clues.

  • Error message eprint did not send job model d110 a

    i have set up and registered all the eprint as instructed and everytime i attempt to print i get the error message that eprint did not send job help me

    Hey lparker9310,
    You may want to check to make sure you are sending from an approved email in the allowed senders list.
    Be sure you are sending to the correct email address ending in @hpeprint.com.
    Check the options below and make sure the email fits the correct criteria.
    If it does, try disabling and re-enabling Web Services again.
    You have successfully registered your product, but when you try to send a print job from your mobile device the print job does not print.
    NOTE: 
    ePrint does not allow auto-forward.
    The following issues will stop a print job from printing:
    You entered the printer’s email address incorrectly.
    The email was sent to multiple printers or recipients. (HP’s ePrint service only processes emails sent to a single recipient. This protects users from unintended printing.)
    There were more than 10 file attachments.
    The total size of the attachments exceeded the 5 MB limit.
    One or more of the attachments contains a virus or a macro. (Scan the attachments for viruses and remove any macros.)
    The attachments were in a format unsupported by ePrint.
    Low-quality photos were included in the print job.
    The printer is not online.
    You do not have permission to use the printer.
    NOTE: 
    Check for product updates by going to the ePrint settings on your printer's control panel.
    ePrint will cancel a print job under the following circumstances:
    The printer is currently busy printing other jobs.
    The printer is turned off or not connected to the Internet.
    NOTE: 
    The printer must be on a wireless network with Internet connection. Connection to the computer is not necessary.
    The printer experienced an error and requires attention.
    A user at the printer, or the printer owner cancelled the print job.
    The printer's ePrint feature was turned off. Turn the printer’s ePrint feature on and resend the print job.
    There was no printable document.
    The print job included photos that were too low in quality to print with good results. (resolution needs to at least 100 pixels in length or width to ensure printing from ePrint (100 dpi).
    The print job could not be printed at this time due to an issue with the ePrint service. Please try again later.
    NOTE: 
    Jobs stay on the server for 24 hours if there is a local printer issue. The server checks printer status regularly. (For example: If the printer’s cover is open, the print job prints when the cover is closed.)
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • How to block or stop hundreds of mail delivery notices that I did not send

    how to block hundreds of incoming email delivery notices that I did not send out

    It sounds as though someone hacked into your email account and/or the account of one of your friends and stole email addresses to use as sender and recipient for spam messages.
    Since the damage is already done so to speak, there isn't a whole lot to do but: do change your email address and send out an email to your friends that the other emails are not from you and not to open or click on anything contained in them.
    Unfortunately, this is happening more and more.

  • E-mails I did not send

    Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day

    bowkill56 wrote:
    Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day
    It sounds like someone has your email login info and is using it to send spam. Any time you think your account might have been compromised, it's a good idea to change your password and secret question/answer to something new and complex, and run a virus scan.
    The SMTP blocks are usually in place for 24 hours, so 24 hours after you stop the intruder, you should be able to send again.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • I am getting undeliverable mail from people I did not send mail to.  How can I get this to stop?

    I recently received rejected mail notices from Postmaster that I did not send and are encrytped.  My address is being used, and I do not know these web addresses these emails were being sent to.  How can I resolve this issue? 

    We will need more information to be able to assist you.
    These message yoy are receiving are probably just a particular type of spam.  However it is also possible (unlikely) that your email account is being used to send spam, and that these are the bounce messages.
    To tell the difference, you need to look at the email headers.  Open the message, then go to the View menu and select Message -> All Headers.
    Select the text and post it back here (remembering to obscure your own email address first).
    Cheers,
    Rodney

  • Getting returned mail messages for emails I did not send

    I've recently started getting returned mail messages for emails I did not send. Why is this happening and how can I stop it?

    cadillacjoe69 wrote:
    That might be tough to do. Is there a rule I can use to help. The mail messages are so varied.
    I'd look at the headers (View -> Message -> Long Headers) to see if there's anything in common, then try to create a rule based on that.
    By the way, welcome to Apple's discussion groups.

  • Some received an e-mail i did not send! have i been hacked? what do i do?

    Someone just asked if I sent an e-mail to her...and a lot of other people that are in my address list were sent it as well. I DID NOT send it! What do I do? Have I been hacked? Help please.
    Thank you!

    Was it some kind of spam?
    One possibility is that someone has access to your account. The best thing to do about that is immediately change your password.
    Another possibility is that there is malware on your computer manipulating it. This article lists a variety of tools you can use to supplement your regular security software in checking for and removing malware: [[Troubleshoot Firefox issues caused by malware]].
    Another possibility is that at some point, someone got a copy of your address book, but they are sending the messages from a different account. Unfortunately, it is easy for spammers to "forge" your name and email address as the sender of a message.
    Or maybe it's a coincidence and spammers are randomly mixing and matching from and to addresses to see if they can slip past the filters?
    I think without more information from the recipient(s), it is difficult to know which of these is the case. For example, the recipients could compare the message headers for a real message and a spam message and compare the servers the messages passed through. Spam sent by automated means from elsewhere on the internet usually travels through a different set of servers between the sender and recipient. That's what I would expect to find. If they are identical, then I would be more concerned about malware or an intruder on your account.

  • Bought the paid version . I can not download the program . Did not send the code .

    Bought the paid version . I can not download the program . Did not send the code .

    Which version of Photoshop?

  • SPNego - J2ee did not send request for authentication

    Hi All,
    I have configured SPNego and completed all setup as per  documentation. When I use the browser  to access the portal, it is prompting for user id and password. If we manually enter the  id and password on AD, it works fine. Somehow not able connect to j2ee without prompting for id and password.
    To troubleshoot this, traced the http traffic using winshark and found that j2ee engine did not send any request for kerberos authentication.
    Is there way to check on the server side to make sure spnego is configured properly  and server is able to send kerberos authentication ?
    Appreciate your help !
    Thanks!

    Login to your Visual Admin, then go to -->Security Provider -->com.sun.security.jgss.accept -->Krb5LoginModule
    Add a Parameter isInitiator and Value false. Save it and take a bounce of J2EE.
    This should solve your login page problem Otherwise paste the default trace.
    You can also read my BLOG  : Common SPNEGO Implementation Issues
    Reward points if my suggestion was helpful -

  • Icloud did not send my notes to the computer!

    My ipod broke because of IOS6 and icloud did not send my notes to the computer! Is there any way to recover them???

    When using WEP, you must enter WEP "key 1" (found in the router)  into the computer, not the WEP password or passphrase.

  • Your help, please...contacts received cryptic e-mails that I did not send

    Your help, please...
    Some of my contacts have received cryptic e-mails that I did not send.
    How do I "clean" my computer?
    Thank you!

    There's nothing wrong with your Mac. One of your PC friends/co-workers has had his address book compromised and the malware is sending out emails from his address book as if they came from the person who's name is in their address book.
    -mj

  • IPad sent out email that I did not send.

    My iPad sent email I did not write and send.  "Something" composed a email and sent it to two people in my address book.  I found out as one of the emails was sent to a closed account and then returned it to me as undeliverable.  I know I did not send the email which contained a link to Canadian pharmacy. 
    What did this, how can I get rid of it, and how can I prevent it?
    HELP

    Not a spoof, after first email was returned I went to the sent folder and found the returned email and an additional email to another working address, both sent at the same time. 

  • Phone Sent Text Message That I Did Not Send

    My friend received a text message from me that I did not send.  She showed me her phone, that it came from my phone.
    I showed, my text messages and that I did not.
    When she responded to it, the message did come back to me.
    What my phone hacked?  Was her phone hacked?  What could have caused this?

    While I have people tell me that all the time, I also see some of these same people leave their phones on the counter in the next room. This is not in their "possession the entire time" even though they claim it to be. You would be the first person I have EVER seen with their phone in their "possession the entire time". It is simply not the case in most situations.
    Regardless...
    You may want to check out THIS app available on iPhones and THIS app available on android devices. It may shed some light on the subject. There are many other available ways to spoof text messages.

Maybe you are looking for