SPNego - J2ee did not send request for authentication

Hi All,
I have configured SPNego and completed all setup as per documentation. When I use the browser to access the portal, it is prompting for user id and password. If we manually enter the id and password on AD, it works fine. Somehow not able connect to j2ee without prompting for id and password.
To troubleshoot this, traced the http traffic using winshark and found that j2ee engine did not send any request for kerberos authentication.
Is there way to check on the server side to make sure spnego is configured properly and server is able to send kerberos authentication ?
Appreciate your help !
Thanks!

Login to your Visual Admin, then go to -->Security Provider -->com.sun.security.jgss.accept -->Krb5LoginModule
Add a Parameter isInitiator and Value false. Save it and take a bounce of J2EE.
This should solve your login page problem Otherwise paste the default trace.
You can also read my BLOG : Common SPNEGO Implementation Issues
Reward points if my suggestion was helpful -

Similar Messages

SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

Hi Experts,
Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
2) If not, Why system did not prompted me for a transport?
3) Then How Can I attach my CDM/changes to a transport?
Thank you

I don't think we get a TR prompt when adding a view in BD64.
You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

Getting returned mail messages for emails I did not send

I've recently started getting returned mail messages for emails I did not send. Why is this happening and how can I stop it?

cadillacjoe69 wrote:
That might be tough to do. Is there a rule I can use to help. The mail messages are so varied.
I'd look at the headers (View -> Message -> Long Headers) to see if there's anything in common, then try to create a rule based on that.
By the way, welcome to Apple's discussion groups.

Using Hyper-V 2012 r2, connecting to the console results in: A certification authority could not be contacted for authentication.

I'm having some trouble with authentication to guests from my Hyper-V console.
If I try to connect from the Hyper-V Manager to the console of any guest, I get the error:
"A certification authority could not be contacted for authentication. If you are using a Remote Desktop Gateway with a smart card, try connecting to the remote computer using a password. For assistance, contact your system administrator or technical support."
I'm not using an RDG and smart card.
I have 2 virtual networks. The first is Production, the second is Isolated. Production has 2 NICs attached to the Production LAN, the second has 2 NICs in our DMZ. The host is a member server of the production domain. I can use MSTSC from the LAN or the DMZ
to gain access to each Guest and the Host.
The issues start if I try "Connect" from Hyper-V Manager in an attempt to use the console of any Guest. Each attempt fails with the above error. If I use an incorrect password, I get a different error: "The credentials that were used to connect
to {Server FQDN} did not work. Please enter new credentials."
Taking a look at the the event logs, I can see the session successfully authenticating to the Guest (4776 Credential validation and 4624 Logon), and the fact I get a different error if I enter an incorrect password show I get some way along the line. However
if I take a look at the logs on the Host, however I get:
An account failed to log on.
   Subject:
       Security ID:       NULL SID
       Account Name:       -
       Account Domain:       -
       Logon ID:       0x0
   Logon Type:           3
   Account For Which Logon Failed:
       Security ID:       NULL SID
       Account Name:
       Account Domain:
   Failure Information:
       Failure Reason:       An Error occured during Logon.
       Status:           0xC000006D
       Sub Status:       0xC000005E
   Process Information:
       Caller Process ID:   0x0
       Caller Process Name:   -
   Network Information:
       Workstation Name:   -
       Source Network Address:   -
       Source Port:       -
   Detailed Authentication Information:
       Logon Process:       Kerberos
       Authentication Package:   Kerberos
       Transited Services:   -
       Package Name (NTLM only):   -
       Key Length:       0
   This event is generated when a logon request fails. It is generated on the computer where access was attempted.
   The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
   The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
   The Process Information fields indicate which account and process on the system requested the logon.
   The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
   The authentication information fields provide detailed information about this specific logon request.
       - Transited services indicate which intermediate services have participated in this logon request.
       - Package name indicates which sub-protocol was used among the NTLM protocols.
       - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Which looks to me like a blank authentication request is being sent? (I've not deleted any machine/domain names, they're just not present)
Any suggestions? Do you think I'm barking up the wrong tree?
Thoughts and comments gratefully received

Hi,
What’s your guest system platform, base on my experience that must be the not supported guest system issue, the generation 2 vm only support the Windows 8 or 8.1 platform.
The related KB:
Generation 2 Virtual Machine Overview
http://technet.microsoft.com/en-us/library/dn282285.aspx
Hope this hleps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Campaign execution not send emails for contact persons

Hi All!
I'm facing a problem with Campaigns (communication medium - E-mail): Those are the steps i'm following:
1.Start the campaign, and on the "campaign: Schedule job" screen, i choose "immediately". If i look at the campaign details after scheduled the job, the status is now "job started".
2. To check wich mails were sent, I also had a look at the business partner account that belongs to the target group used. On the "Interaction History" block, there is a line: "Outgoing Email" - on the details of this outgoing email I can see the "To" (Receivers). And here, I have emails from the business Partner contact persons and from the business partner itself (the email that is on the header level of the business partner account, on the "main address and communication data" area). So far so good. That's exactly what i need but,
3. If i go to the tcode, i only have a send request for the business partner itself and none for his contact persons (although those emails are on the "To" line for the interaction history).
I'm working on the Webclient UI, of the CRM 7.0
Does someone knows why the emails are not being sent also for the contact persons?
Thanks in advance.
Inê

I have achieved this by implementing the BADI : CRM_MKT_ADR_SEARCH
In this BADI's method : CHANGE_SEARCH_RESULTS you can modify the data which is being sent back to system for campaign execution.
NOTE: I am using Address Independent Communication Data of Business Partner
Below is my sample code for contact person email :
data: wa_bp_cp_channel type crmt_bp_cp_channel.
field-symbols: <fs_bp_cp_channel> type crmt_bp_cp_channel.
types: begin of ty_cp,
          partner type but000-partner,
          address type but000-addrcomm,
         end of ty_cp,
         begin of ty_bpcp,
           partner1 type but051-partner1,
           partner2 type but051-partner2,
         end of ty_bpcp.
data: it_cp type table of ty_cp,
        wa_cp type ty_cp.
data: it_bpcp type table of ty_bpcp,
        wa_bpcp type ty_bpcp.
data: it_bp type table of ty_cp,
        wa_bp type ty_cp.
read table ct_bp_cp_channel into wa_bp_cp_channel with key com_channel = '03'.
if sy-subrc = 0.
    select partner addrcomm
      from but000
        into table it_cp
          for all entries in ct_bp_cp_channel
            where
              partner = ct_bp_cp_channel-cp_number.
    select partner1 partner2
      from but051
        into table it_bpcp
          for all entries in ct_bp_cp_channel
            where
              partner1 = ct_bp_cp_channel-bp_number.
    if it_bpcp[] is not initial.
      select partner addrcomm
        from but000
          into table it_bp
            for all entries in it_bpcp
              where
                partner = it_bpcp-partner2.
    endif.
    sort it_cp by partner.
    sort it_bp by partner.
    sort it_bpcp by partner1.
    loop at ct_bp_cp_channel assigning <fs_bp_cp_channel> where com_channel = '03'.
      read table it_cp into wa_cp with key partner = <fs_bp_cp_channel>-cp_number binary search.
      if sy-subrc = 0.
        <fs_bp_cp_channel>-addrnumber = wa_cp-address.
        clear <fs_bp_cp_channel>-bp_number.
        clear <fs_bp_cp_channel>-bp_guid.
      else.
        read table it_bpcp into wa_bpcp with key partner1 = <fs_bp_cp_channel>-bp_number binary search.
        if sy-subrc = 0.
          read table it_bp into wa_bp with key partner = wa_bpcp-partner2 binary search.
          if sy-subrc = 0.
            <fs_bp_cp_channel>-addrnumber = wa_bp-address.
            clear <fs_bp_cp_channel>-bp_number.
            clear <fs_bp_cp_channel>-bp_guid.
          endif.
        endif.
      endif.
    endloop.
endif.

How to block or stop hundreds of mail delivery notices that I did not send

how to block hundreds of incoming email delivery notices that I did not send out

It sounds as though someone hacked into your email account and/or the account of one of your friends and stole email addresses to use as sender and recipient for spam messages.
Since the damage is already done so to speak, there isn't a whole lot to do but: do change your email address and send out an email to your friends that the other emails are not from you and not to open or click on anything contained in them.
Unfortunately, this is happening more and more.

How to go back on page by not sending request to servlet

Hello,
I have create web application using JSP and servlets. When I press a button I send request to servlet and it redirects me to jsp page where the results are displayed, then in that page I press a button and go to other servlet which redirects me to other JSP.
I want to make a button on the third JSP page to go back to second JSP page by not sending request to servlet. For e.g. in FireFox, I press back button and it takes me back. But I want that the same action like in firefox would work with my created button.
How can I do that?
Edited by: peliukasss on Sep 14, 2010 3:28 PM

evnafets wrote:
You wnat your created button to act the same as the "back" button in the browser?Yes, thats exactly what I need.
Then all you need to do is invoke some javascript on it.
After a quick google search, the most commonly suggested solution appears to be:
onclick="history.go(-1)"
Thanks for your reply.

E-mails I did not send

Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day

bowkill56 wrote:
Hi keep getting a faild dil. from postmaster from e-mails I did not send so now Iam blocked from sending e-mails and can,t contact sup. by email. some time a hundred a day
It sounds like someone has your email login info and is using it to send spam. Any time you think your account might have been compromised, it's a good idea to change your password and secret question/answer to something new and complex, and run a virus scan.
The SMTP blocks are usually in place for 24 hours, so 24 hours after you stop the intruder, you should be able to send again.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Some received an e-mail i did not send! have i been hacked? what do i do?

Someone just asked if I sent an e-mail to her...and a lot of other people that are in my address list were sent it as well. I DID NOT send it! What do I do? Have I been hacked? Help please.
Thank you!

Was it some kind of spam?
One possibility is that someone has access to your account. The best thing to do about that is immediately change your password.
Another possibility is that there is malware on your computer manipulating it. This article lists a variety of tools you can use to supplement your regular security software in checking for and removing malware: [[Troubleshoot Firefox issues caused by malware]].
Another possibility is that at some point, someone got a copy of your address book, but they are sending the messages from a different account. Unfortunately, it is easy for spammers to "forge" your name and email address as the sender of a message.
Or maybe it's a coincidence and spammers are randomly mixing and matching from and to addresses to see if they can slip past the filters?
I think without more information from the recipient(s), it is difficult to know which of these is the case. For example, the recipients could compare the message headers for a real message and a spam message and compare the servers the messages passed through. Spam sent by automated means from elsewhere on the internet usually travels through a different set of servers between the sender and recipient. That's what I would expect to find. If they are identical, then I would be more concerned about malware or an intruder on your account.

I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?

I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?

You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them

Online Report Server did not send the report data. (Error: BAW 0059)

Can someone confirm me if we can create an e-mail publication for promt based reports? I was created publications for non-prompt based report and they were successful. But when I create a publiction for an report which has prompt I am gettign the error - Online Report Server did not send the report data. (Error: BAW 0059). Any ideas?
--Nivas

I forgot to mention the envionment, which is 6.5.1

Send request for INT has no recipients(Alerts)

Hey
guys i m trying to configure alerts for my scenario and following Michals blog,alert waz triggered once but after that i m getting the following error "Send request for INT has no recipients".in SU01 i have given e-mail address and have admin permission,alerts are not triggered in SLG1 at all and in table SALRTTROLE,i dont see any values.
any idea where should i start lookin?
i have followed the troubleshootin blog too but couldn't solve
thanx
ahmad

thanx Satish
but i have gone through that thread,actually whats happening is that once i create a alert and trigger it by sending wrong data,i can see it in my alert inbox in RWB,but after that if i resend wrong data again,i dont see it,i have unchecked the "Supress multiple alerts " in Alert configuration too.
i m getting the following warning
Address of recipient AHMAD (INT) could not be read
Message no. SALERT033
Diagnosis
The communication data for communication method INT could not be determined for recipient AHMAD.
and after this warning in next line i get the following error
Send request for INT has no recipients
thanx
ahmad
Message was edited by:
Ahmad

TS2755 Receiving numerous bounced e-mails on my iPad that I did not send. Is this a virus?

Receiving numerous bounced e-mails on my iPad that I did not send. Is this a virus?

There have been no viruses or other malware reported for iOS devices. You do not have a virus on your device. but your email may have been hacked. Contact your email service provider.

Emails that were sent out of my account that i did not send that resulted in failed attempts

When checking my emails today. I noticed four emails that had apparently been sent at 4:00 am that I did not send. They appeared in the inbox as failed emails.
I am not sure what to do about this.

Contact your e-mail provider (Gmail, Yahoo, AOL, etc). Your mail account may be compromised.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

I was hacked in my gmail account and an email was sent from my gmail account that I did not send. What do I do now?

An email was received by another person originating from my email address. I did not send this email which was an advertisement for a home based job. What do I do now that I have been hacked?
Thanks!

Definitely change password to something harder, and your security questions as well. It sucks to get hacked.
Good luck!

SPNego - J2ee did not send request for authentication

Similar Messages

Maybe you are looking for