Online Report Server did not send the report data. (Error: BAW 0059)

Can someone confirm me if we can create an e-mail publication for promt based reports? I was created publications for non-prompt based report and they were successful. But when I create a publiction for an report which has prompt I am gettign the error - Online Report Server did not send the report data. (Error: BAW 0059). Any ideas?
--Nivas

I forgot to mention the envionment, which is 6.5.1

Similar Messages

OC4J Report Server is not saving the PDF out put

Hi everybody,
I have a master report running under OC4J.Under this master report 1000's of other reports are runninng by using the srw.run_report.Report name and other required parameters are taking from the database.My aim is to send all generated PDF reports by using the javamail.My problem is report server is not saving any reports until the completion of the master report.Once the master report is completted we can see all the reports under the specified folder, before that we can not see the out put in the folder .So the above reason my mailing part is getting faild because of system cannot find the specified file in that particular path
Hi anybody know how to save each pdf report in a folder insted of waiting the completion of entire report
Is any particular report configuration is required for that?
srw.runreport is running in the batch mode
thanks in advanceee
regards
mathew
Message was edited by:
Mathew Thomas

Please helppp meee

Receiver SOAP Adapter Problem-soap fault: Server did not recognize the valu

I have a scenario for service orders using async call : IDOC-XI-SOAP.
I used the XML Spy tool to test the Service order's web services and it works fine. I imported the same WSDL file in XI. When I send a SOAP message from XI, I get a following error in the adapter engine.
<i>MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server did not recognize the value of HTTP Header SOAPAction: AddUpdateCostObjectLevel1.</i>
Can someone please help me...
Thanks in advance!
Mrudula

This problem is resolved by me by passing the "http://company's URL/AddUpdateCostObjectLevel1" in the SOAP action.
Thanks to all for your input.
Mrudula

BC Ecommerce SOAP Error: Server did not recognize the value of HTTP Header SOAPAction

I am trying to add a product to an ecommerce site with this soap action: Product_UpdateInsert
I have followed this very brief instruction: https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx?op=Product_UpdateInsert
I have a html page in a secure area with a jQuery ajax soap script.
I get the this error when I run the script:
<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><soap:Fault><faultcode>soap:Client</faultcode><faultstring>Server did not recognize the value of HTTP Header SOAPAction: https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert.</faultstring><detail /></soap:Fault></soap:Body></soap:Envelope>
I have also tried to add a header with the Soap action with the beforeSend in the ajax call.
This must have been solved before I suppose?
Here is my script:
<!DOCTYPE html>
<html lang="en">
<head>
<title>Test SOAP Request</title>
    <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/jquery-cookie/1.3.1/jquery.cookie.min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/underscore.js/1.5.1/underscore-min.js"></script>
    <script type="text/javascript" src="//cdnjs.cloudflare.com/ajax/libs/backbone.js/1.0.0/backbone-min.js"></script>
    <script type="text/javascript" src="//cdn.worldsecuresystems.com/bcapi/bcapi-0.0.1.min.js"></script>
</head>
<body>
<script>
var wsUrl = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
var soapRequest =
'<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
    <Product_UpdateInsert xmlns="https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice"> \
      <username>myEmailAdress</username> \
      <password>mySecretPassw</password> \
      <siteId>1894001</siteId> \
      <productList> \
        <Products> \
          <productCode>ZJAWEyuuyN</productCode> \
          <productName>My test product</productName> \
          <description>Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.</description> \
          <smallImage>/images/product1/small.jpg</smallImage> \
          <largeImage>/images/product1/large.jpg</largeImage> \
         <cataloguesArray> \
             <string>/Store/</string> \
          </cataloguesArray> \
          <pricesSaleArray> \
            <string>US/19.95,3/17.96,7/16.96</string> \
          </pricesSaleArray> \
          <pricesRetailArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesRetailArray> \
          <pricesWholesaleArray> \
            <string>US/20,5/19,8/20</string> \
          </pricesWholesaleArray> \
          <wholesaleTaxCodeArray> \
            <string>US/0.00</string> \
          </wholesaleTaxCodeArray> \
          <taxCodeArray> \
            <string>GB/VAT</string> \
          </taxCodeArray> \
          <groupProducts> \
            <string>580H0036BL</string> \
            <string>ACAI60</string> \
            <string>ABC-123</string> \
          </groupProducts> \
          <groupProductsDescriptions> \
            <string>Lorem ipsum dolor sit amet</string> \
            <string>consectetur adipisicing elit</string> \
          </groupProductsDescriptions> \
          <supplierEntityId>1234</supplierEntityId> \
          <supplierCommission>0</supplierCommission> \
          <weight>30</weight> \
          <tags>NEW!</tags> \
          <unitType>string</unitType> \
          <minUnits>0</minUnits> \
          <maxUnits>2</maxUnits> \
          <inStock>43</inStock> \
          <onOrder>3</onOrder> \
          <reOrder>2</reOrder> \
          <inventoryControl>true</inventoryControl> \
          <canPreOrder>true</canPreOrder> \
          <custom1>Text in custom field 1</custom1> \
          <custom2>Text in custom field 2</custom2> \
          <custom3>Text in custom field 3</custom3> \
          <custom4>Text in custom field 4</custom4> \
          <popletImages>/images/image1.jpg;/images/image2.jpg;</popletImages> \
          <enabled>true</enabled> \
          <deleted>false</deleted> \
          <captureDetails>true</captureDetails> \
          <downloadLimitCount>20</downloadLimitCount> \
          <limitDownloadsToIP>0</limitDownloadsToIP> \
          <isOnSale>true</isOnSale> \
          <hideIfNoStock>true</hideIfNoStock> \
          <productAttributes>Size*|5|Y:L||UK/2|US/20,S||UK/1|US/10</productAttributes> \
          <isGiftVoucher>false</isGiftVoucher> \
          <enableDropShipping>true</enableDropShipping> \
          <productWeight>0</productWeight> \
          <productWidth>0</productWidth> \
          <productHeight>0</productHeight> \
          <productDepth>0</productDepth> \
          <excludeFromSearch>false</excludeFromSearch> \
          <productTitle>My product title</productTitle> \
          <cycletypeId>3</cycletypeId> \
          <cycletypeCount>-1</cycletypeCount> \
          <slug>my-product</slug> \
          <hasVariations>true</hasVariations> \
          <variations> \
            <ProductVariation xsi:nil="true" /> \
            <ProductVariation xsi:nil="true" /> \
          </variations> \
        </Products> \
      </productList> \
    </Product_UpdateInsert> \
</soap12:Body> \
</soap12:Envelope>';
$.ajax({
     type: "POST",
     beforeSend: function(xhr){xhr.setRequestHeader('SOAPAction', 'https://jollyrogers.worldsecuresystems.com/CatalystDeveloperService/CatalystEcommerceWebse rvice/Product_UpdateInsert');},
     url: wsUrl,
     contentType: "text/xml",
     dataType: "xml",
     data: soapRequest,
     success: processSuccess,
     error: processError
function processSuccess(data, status, req)
   if (status == "success")
   alert("Success!");
function processError(data, status, req)
   alert("Failed!");
   alert(req.responseText + " " + status);
</script>
</body>
</html>

This line is a target namespace so it should not be changed: <Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> It is very easy to think that it's a placeholder and that it should be replaced with your own url, which it should not and which will fail.
This works now:
<!DOCTYPE html>
<html lang="en">
    <head>
        <title>Test 7 SOAP Request</title>
        <script type="text/javascript" src="//code.jquery.com/jquery-1.10.2.min.js"></script>
    </head>
    <body>
        <script>
            var SoapMessage = '<?xml version="1.0" encoding="utf-8"?> \
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope"> \
<soap12:Body> \
<Product_Retrieve xmlns="http://tempuri.org/CatalystDeveloperService/CatalystEcommerceWebservice"> \
<username>Your Email</username> \
<password>Your password</password> \
<siteId>1894001</siteId> \
<productCode>HHKDKXS5MB</productCode> \
            </Product_Retrieve> \
            </soap12:Body> \
            </soap12:Envelope>';
            var url = "https://jollyrogers.worldsecuresystems.com/catalystwebservice/catalystecommercewebservice. asmx";
            $.support.cors = true;
            $.ajax({
                type: "POST",
                url: url,
                data: SoapMessage,
                dataType: "xml",
                processData: true,
                contentType: "text/xml; charset=\"utf-8\"",
                success: function (msg) {
                    alert("suc: " + msg);
                error: function (msg) {
                    alert("Failed: " + msg);
        </script>
    </body>
</html>

ICloud IMAP server does not send the CAPABILITY with CRLF

IMAP iCloud server does not send the CAPABILITY response with CRLF appended as per RFC 3501. Please find the log snippet
11-05 10:50:52.462 29603 29988 D Email   : open :: socket openjava.io.BufferedInputStream@43a726a8 | java.io.BufferedOutputStream@43a72b68
11-05 10:50:52.502 29603 29988 D Email   : <<< #null# ["OK", ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"], "iSCREAM ready to rumble (1S:1092) st11p00mm-iscream023 [42:4469:15:50:53:39]"]
11-05 10:50:52.502 29603 29988 D Email   : >>> 1 CAPABILITY
11-05 10:50:52.552 29603 29988 D Email   : <<< #null# ["CAPABILITY", "st11p00mm-iscream023", "1S", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "SASL-IR", "AUTH=ATOKEN", "AUTH=PLAIN"]
11-05 10:50:52.562 29603 29988 D Email   : <<< #1# ["OK", "!!"]
11-05 10:50:52.582 29603 29988 D Email   : >>> [IMAP command redacted]
11-05 10:50:52.682 29603 29988 D Email   : <<< #2# ["OK", ["CAPABILITY", "XAPPLEPUSHSERVICE", "IMAP4", "IMAP4rev1", "ACL", "QUOTA", "LITERAL+", "NAMESPACE", "UIDPLUS", "CHILDREN", "BINARY", "UNSELECT", "SORT", "CATENATE", "URLAUTH", "LANGUAGE", "ESEARCH", "ESORT", "THREAD=ORDEREDSUBJECT", "THREAD=REFERENCES", "CONDSTORE", "ENABLE", "CONTEXT=SEARCH", "CONTEXT=SORT", "WITHIN", "SASL-IR", "SEARCHRES", "XSENDER", "X-NETSCAPE", "XSERVERINFO", "X-SUN-SORT", "ANNOTATE-EXPERIMENT-1", "X-UNAUTHENTICATE", "X-SUN-IMAP", "X-ANNOTATEMORE", "XUM1", "ID", "IDLE"], "User test logged in"]
11-05 10:50:52.682 29603 29988 D Email   : >>> 3 CAPABILITY
11-05 10:50:52.742 29603 29988 W Email   : Exception detected: Expected 000a (
)1-05 10:50:52.742 29603 29988 W Email   : ) but got 000d (
This is happening only when CAPABILITY command is sent follwed by LOGIN command. Please check this issue.

If you want your mail delivered properly the Official Host Name of the sending server should match the PTR (reverse DNS) of the sending IP Address, and there should be an "A" record that matches the OHN as well.
Example:
mail.yourdomain.com (Official Host Name) on 123.123.123.123
PTR for 123.123.123.123 should match mail.yourdomain.com
There should be an A record in yourdomain.com pointing to 123.123.123.123
Kostas

Server did not recognize the value of HTTP Header SOAPAction: .

hello friends,
I am wrote a WebService client as below
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class AtmuClient
public static void main(String [] args) {
try {
String req="request";
String endpoint ="http://10.1.3.104/mims/service.asmx?WSDL";
String nameSpaceUri = "http://www.cum.com/MIMS";
Service service = new Service();
Call call = (Call) service.createCall();
call.setTargetEndpointAddress( new java.net.URL(endpoint) );
call.setOperationName(new QName(nameSpaceUri, "echoString") );
String ret = (String) call.invoke( new Object[] { req } );
System.out.println("Sent 'Hello!', got '" + ret + "'");
} catch (Exception e) {
System.err.println(e.toString());
the out put I am getting is
Server did not recognize the value of HTTP Header SOAPAction: .
what still I need to incorporate to my code. Do i need to add any methods still ? and one more thing is do i need to write WSDD for this? how ?. can any bady guide me
thanQ for any greatful guidance.
HAN.

Try setting an empty header object for the Call
SOAPContext ctx = new SOAPContext();
Header header = new Header();
Call call = new Call("", "", params, header, "", ctx); Regards
Byju Joy

Bought the paid version . I can not download the program . Did not send the code .

Bought the paid version . I can not download the program . Did not send the code .

Which version of Photoshop?

Adobe Reader XI did not save the form data (unlike previous versions). Any way to recover file?

Adobe Reader XI did not save the form data (unlike previous versions). Any way to recover filled form with data from temp locations?
I was not aware that ctrl+s no longer works in reader and closed the PDF after savign it(with ctrl+s). However ,the data is lost and there seems to be no way to recover it.
I cannot find any temp files created by Reader on my system.
Also to my surprize(and shock), the reader did not even show a warning before closing the PDF. Does anybody know if/where can I recover the file from?
Guys, Please reply ASAP if you have got any sort of solution!

Hi Pat,
Are you using Adobe Reader XI? And not Acrobat. It does not ask me to save the form if there are unsaved changes.
I have used previous versions of reader for saving this form data and it did allow me to save it with ctrl+s. And those versions did prompt me to save the changes before closing.
I guess I should not have updated the reader.

Sharing via email says the server did not recognize the username and password combination

I am trying to share photos in iPhoto via email (gmail) and it says the server does not recognize the username password combination. I have deleted the email account rebooted iMac and re-entered the gmail account info and I get the same message. I have confirmed the username and password are correct.

LarryHN I guess I should have clarified that. I did try it that way and I am able to email pictures with mail set as the email client. When I change it to iPhoto as the email client is when I get this message. I have the same setup on my Macbook and it works great for emailing pictures from iPhoto. Although I can send them through email client, I prefer doing it through iPhoto.

PPM Integration Model Activation did not send delta change data

Hi all,
I have an integration model of PPM's. I activated the PPM for the initial transfer.
When I create a new prod. version, I created a new version of the model for PPM, above the previous active one.
When I activated the new version of model, the system tried to send all data.
I supposed that the system would only send the changed data, because the previous model is active.
but the system sent all PPM's
and it takes too long.
Would you please answer why does the system react like that and what must we do?
Mehmet

Hi
In order to check what is occuring, in your ERP system look at Table CIF_PPM_CHANGED, this will tell you the Material, Plant and Prod Vers of your PPM,s. It also has a field CHANGED to tell you if any changes have taken place and a field PROCESS, which should be set to "X" if the change has passed over to APO.
Check the values in your table to see if this has been set. It should only send the delta records where there is a value in CHANGED and PROCESS=" ".
Also check to ensure that people are not changing the Bills of Material or Routings etc, as this will also resend the PPM´s.
Regards
Ian

Report server parameter not calling the right url

Hi,
I installed a Oracle 10g application server on windows 2003 server. there were not customization being made yet.
I run my form, click to call a report and it shows the parameter form nicely.
at this point, the url shows http://www.mydomain.com:7777/reportbla-bla-bla
After selecting my parameters, i click submit and the system shows web page cannot display.
at this point, the url shows http://myserverpcname:7777/reportbla-bla-bla
Can someone please tell me what should I do to set for the report parameter to call the right url?
Thanks

I found the solution already... the setting is to be done at httpd.conf file

9ias report server --could not get the response

i could not run reports server on linux 6.2.
it works like this ---- web site found, waiting for reply
then i get no response.
have anybody got answer for that????
plz help
i detailed configuration procedure (incuding patches etc)
will be much helpful.
thanks in advance
smaran
[email protected]

It's still not working even if I export for ORACLE_HOME
Red hat version : 2.6.9-5ELsmp
[oracle@appli bin]$ ./rwdiag.sh -findall
Environment:Environment java.lang.UnsatisfiedLinkError: /u01/app/oracle/mdw/lib/ librwu.so: /usr/X11R6/lib/libXm.so.2: undefined symbol: _Xsetlocale
Environment:getEnvironmentStrings java.lang.UnsatisfiedLinkError: /u01/app/oracl e/mdw/lib/librwu.so: /usr/X11R6/lib/libXm.so.2: undefined symbol: _Xsetlocale
java.lang.reflect.InvocationTargetException
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
REP-50503 No server found in the network

"server did not recognize the following recipients", Easy Fix

I have had problems with sending emails to the members of an organization, as a Group in Address Book. I'd get the message shown in the title above, with smtp.me.com being the server. In the past, many many tries usually resulted in eventual success. This time I decided to get to the bottom of it.
I searched the forums; my settings seemed to be correct. After that, the only relevant thing was the statement that there's a 100-address limit on Groups, set by Apple. I cut my group into two, each with about 75 members. No luck.
Next I tried Apple's Mobileme help chat. The first time I was told I had corrupted addresses and had to export everything as a Vcard file (which would somehow clear up the corruption), erase the entire contents of Address Book, reimport the Vcard file data, and then manually re-establish my Groups.
Two things about this bothered me: one of the rejected addresses I knew for a fact was good, and then the daunting prospect of making some sort of saved list of group members and then manually choosing them all over again out of the entire list of contacts. So I logged into chat again.
The second person I chatted with told me the same thing but that I could save my Groups by exporting each one separately as a Vcard file (one file per group, it is in the Export menu of AB) and then making new empty groups with my original Group names, and re-importing them.
This I did. First I backed up the Address Book datafile, then I exported the entire list of everyone, then exported each group, so I had a bunch of separate Vcard files with names like "AllAddresses.vcf", "Jack'sFriends.vcf", "SmithEvent.vcf" and so on. Then I chose all the entries in AB and deleted them. I Imported the "AllAddresses.vcf" file, then in AB I made the Groups again: Jack'sFriends and so on. Then instead of importing the various .vcf files I just dragged each one to its corresponding Group in AB.
Voilá!
My database was recreated, easily. No duplicates were created.
Only problem was, the email was still rejected. This magical process of exporting as .vcf file is supposed to clear up corruption. But what if that was not the problem?
I decided next to divide my 2 Groups that I was sending to, into 8 small groups, as a way to more easily find the bad addresses, and possibly dodge the problem if it was related to the groups being still too large.
When I reduced the size of the Groups to between 20 and 30 addresses each, and sent 8 separate emails, the problem vanished. (I did not try each of the 8 Groups in the address block of a single email, which would have been a lot easier than cutting and pasting to make 8 different identical emails. It might work.)
None of the addresses had been bad. Apparently it was just that the number of addresses was too large, at about 75. I should note that I tried sending via my gmail account also and it had failed with the exact same message.
So, divide and conquer!
Hope this helps someone else.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

The mail on my i mac sent out three messages i did not address and did not send the one i had addressed

i wrote a message this morning, it did not arrive to the intended address, but arrived was delivered to three individuals who had not been addressed, one of whom was last written in 2010. what happened?

Look in your Sent folder to retrieve the message you actually sent and see to whom it was addressed.

Server does not know the service data location

I have changed the server data location to the "other" drive of my MacMini.
Apparently, email or web use the new location.
But in the summary section of server.app, there is no filed for the data location and the "modify" button is greyed.
I probably can live with it, but this is not very comfortable.
Thanks in advance to tell me what to do.
Emmanuel
MacMini 2013 with 2 SDDs; OS X 10.9.2 ; Server 3.0.3

Go to your Drafts folder in Mail and delete it.

Online Report Server did not send the report data. (Error: BAW 0059)

Similar Messages

Maybe you are looking for