PR item text to be updated on Process order release

Hi Experts,
The scenario is mentioned below :
The purchase requisitions would be created on the release of PRocess order.
My requirement is to update the item text of the Purchase requisition ( with the process order data such as BATCH & Material ) on release.
I have already tried quiet a few user exits, but beacuse the PR number is not yet generated in these exits,hence I cannot use create_text or save_text.
Please let me know if someone has any idea on how this can be solved.
Hoping for a quick response.
Warm Regards

Hi
Check the exits related to PR for Process order
COZF0001
COZF0002
Try to fetch the Long texts of the PR's using the READ_TEXT and use the fun module
CREATE_TEXT for saving the same in Process order by using the Right parameters like OBJECTName,ID,OBJECT and LANG in bothe cases for PR and process order.
The tables link between the PR and the order is
AFKO-AUFNR = EBKN-NPLNR ( process order number) in PR account assignment table
use this link and try to save the text as mentioned above
Reward points if useful
Regards
Anji

Similar Messages

Batch not updated in process order

hi all,
When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process order

HY,
Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
Regards
Dhaval

Suggest the user exit when process order released then save

Need to update batch value from component's batch field to FG batch field. Need at the time of process order released and saved. Can you please tell me which user exit to use?

Hi,
The following enhancements are available for process order management:
For order maintenance:
o   PPCO0006 to predefine entries for order header fields when creating
    an order
o   PPCO0001 to provide information at the time of saving (for
    production orders and process orders)
o   PPCO0007 to check or change header data when saving
o   PPCO0002 to add additional checks that are to take place when
    setting the deletion flag or deletion indicator
o   PPCO0003 to prevent changes in sales order items that would cause
    changes in the process order for static assembly processing
o   STATTEXT to format the status line
o   PPCO0008 to check components that have been changed or added
o   PPCO0005 to change the storage location and the 'backflush'
    indicator in the reservation
o   PPCO0013 to change the priority of the selection criteria for batch
    determination in production orders or process orders
o   PPCO0014 to restrict the selection of process orders that are
    offered when creating external relationships
o   PPCO0020 to display additional information for another tab page in
    the process order header
Regards,
Dhaval

User Exit at process order release or save

Dear experts,
Can any one help me which user exit will be useful at the time of process order release or save (t code COR1/COR2).
My requirement is to stop the process order release if there is any maintenance order is already released on that date.
Process order should not get released in between the start and finish date of PM order for the same equipment.
I could acheive this for PM side by using a user exit IWO10002, here if any process order is released for an equipment PM order cannot be released for the same equipment in between start n finish date of the process order.
Please help me out in finding the user exit for process order release / save.
Thanks in advence,
Regards,
Praveen.

Hi,
The following enhancements are available for process order management:
For order maintenance:
o   PPCO0006 to predefine entries for order header fields when creating
    an order
o   PPCO0001 to provide information at the time of saving (for
    production orders and process orders)
o   PPCO0007 to check or change header data when saving
o   PPCO0002 to add additional checks that are to take place when
    setting the deletion flag or deletion indicator
o   PPCO0003 to prevent changes in sales order items that would cause
    changes in the process order for static assembly processing
o   STATTEXT to format the status line
o   PPCO0008 to check components that have been changed or added
o   PPCO0005 to change the storage location and the 'backflush'
    indicator in the reservation
o   PPCO0013 to change the priority of the selection criteria for batch
    determination in production orders or process orders
o   PPCO0014 to restrict the selection of process orders that are
    offered when creating external relationships
o   PPCO0020 to display additional information for another tab page in
    the process order header
Regards,
Dhaval

Batch number coming automatically at the time of Process order release

Hi All,
I want the system generated batch number for header material to come automatically at the time of process order release.
At present ,the batch number is entered manualy dering process order creation.
Can anyone pls guide abt the settings required for the same

Dear,
Define the production scheduling profile CORY then
Auto Batch Creation = 2 On release.
Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
Now for automatic generation i have to set internal number asignment for batches.
Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Mar 12, 2010 12:40 PM

FEFO logic in batch determination for process order release

Batch determination for a particular material in a process order was following FIFO logic . We needed to change it to FEFO hence we made the necessory changes in COB1 how ever the process order relase is still taking the batch whihs is not the first expiry batch
Kindly help in batch determination with FEFO for process order release.

Rk
The blw explation for inventory side, i don't have idea for prod order side
If Batch Management is active for the materials then use following process;
First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
Assign this characteristics in CL02 in your Batch Class.
CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
Now do batch determination in MIGO.

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Text in PI Sheet and Process Order did not match

Dear Sir,
We are going to upgrade to our system from 4.7 to ECC6.
We have a problem with PI Sheets with the Long text. The text instruction shown in the PI sheet is not matching with the long text put in the Process Order and Master Receipe.
We are using the Process Instruction Category "INST" and we are puting long text for instruction for this in the Master Receipe. At the time for creation of Process Order this Process instruction Category fatch correct value of long text from the Master Receipe after released the Process Order, Control Recipe generated for the same Process Order. But when we are going to process these Control Receipe from the T-Code CO60, We find the some different text for the "INST".
This problem is not for one Material and Plant Specific.
Thanks and Regards,
Gaurav Kumar
Application Consultant SAP PP
Mobile +91 9971003631

Hello Gaurav,
There might be another possibility, make sure if you make any changes in the Control Recipe Destination program or user exit to populate the long text while sending the CR to the destination to reflect with the PO/Master Recipe.
with best regards
K. Mohan Reddy

Item text not getting copied into sales order from inbound Idoc

Hi All,
I have a scenario where in we get the sales order created through a inbound 850 idoc .
The trading partner sends the sales order information which gets through GENTRAN and gets posted as inbound idoc in SAP .
The problem here is that ,there are segments with values for item text in the idoc ,but the item text is not getting carried over to the sales order which is getting created because of this idoc.
There is no problem with the header text and it is present both at the idoc as well as the sales order level.
I have checked the configuration for text determination and everything looks fine .
Please let me know has anyone come across a scenario like this .This is important as our EDI is getting failed when an outbound 810 is sent from SAP for the simple reason that there is no item text .
Thanks
Sridhar

Hello Sridhar
Do you have access to the genuine 850 EDI message? Does it contain the item texts? If so then there is probably a problem with the (XSLT) mapping EDI 850 -> ORDERS.ORDERS05 IDoc.
Are you able to test the mapping independent of the EDI transmission? This way you could nail down the problem.
Regards
Uwe

Actual Cost & Quantity not update in Process Order

HI,
Process order confirmed from Production person before maintain the actity price rate.
hence those confirmation are gone in to the error & found in t.code COFC
afterword the activity rates are maintained & we reprocess those confirmation thorugh COFC, now there is no COFC entries
but still actual quantity & cost not updated.

Hi Ajay
'Z_UPD_ACT_IN_OPR_UNICODE in the note 736018.... Ask your ABAPer to implement the program and execute the same
You may need to raise an OSS message incase the program is not available to download
BR,Ajay M

DLV status not updated in Process order

Hi guys,
I did GR and got goods receipt documents but system is not updating DLV status in process order.
Actually i have by-product and co-products as components in order. I did posting of by-product from Confirmation screen COR6N and for co-products i did MB31 and goods movement doc. get generated. Qty. is also updated in order but NOT the dlv status.
Pl.suggest

Dear,
This is System status and you cannnot maintain it manually once that Business Transaction(FULL Delivery) happens System will automatically sets that status.
DLV status updated once Del completed tick is activated in order header, This tick will get uodated once you do GR for complete qty.
You need to Final confirm (CNF) the Order to get the DLV Status.
Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV.
If you want to make it manually then goto co02, enter the order, goto goods receipt tab page and activate delivery completed tick and save...DLV is activated in the head as status.
Please check in BS22-I0012
Regards,
R.Brahmankar

ITEM TEXT Not Pulling in to Sale order Item Level

Hello All,
I have maintained ITEM Text in VD52 CMIR, when i try to create Sale order and trying to check the item text at item level but it is not pulling, please suggest me where i need to correct.
Thanks in advace,
Suma

Hi,
Have you marked the checkbox "Selection indicator for list screens" just before the language field in VD52 ? If not then mark it and then see if the text gets pulled into item text or not.. It will pull for sure after selecting the checkbox.
Hrishi

Withdrawn qty of components automatically updates in Process order

Hi,
We are facing a peculier problem.
We create a process order. Some of the components have very less requirement qty (0.004 abc where 0.1 abc = 0.01 g).
Withdrawn qty for these components are automaticcaly updated equivalent to requiremnents qty although there is no goods movement.
Due to this reason the reservation of these components is also 0 & due to this reason only no Transfer requirements is created.
Any inputs on this issue is highly appreaciated.
regards,
Mohit

Dear
Please note the following in your case :
1.During maintaing the unit of measure in T-code CUNI we can define No. of decimal places to which rounding should be performed which specifies the number of decimal places to which this measurement unit should be rounded.
System will not allow more than 3 decimal places in satandard SAP.You can use a larger base quantity of 100 or 1000 in the BOM header (instead of 1).That would eliviate your issue with the 3 decimal places in the component quantity. SAP always takes the base quantity into account during requirements calculation.
refer : How to maintain decimal places in BOM Qty & what is the essence of base qty
2.Pl go to SU3 transaction and select 'Defaults' tab, check option selected against 'Decimal Notation'. pl select dot decimal notation and SAVE.After you changed it, please re-start your sap session(s).Or go to System -
> User profile-----> Own Data. In user profile page go to Default setting for Decimal notation. Change it to 1,234,567.89
Check both the point and try
Regards
JH

Item text needed in Smartform for Purchase Order

Dear Friends
i am creaing a smartform form for a Purchase Order , where i am to show item text , & material po text
also but i am not getting how to show them , i have tried with Function Module Read_ text but if for any item text is not maintained it throw a error     text xxxxxxxxxx code f01 not found in language en .
kindly somebody help me with the elaborated steps
regards
digvijay rai

Requirement : Need to display the item text in the scripts Tcode me23n.
problem: the below subroutine program which i wrote reads the entire paragraph but when the values transfered to the script, the script variable accepts only one line. can you please help to pass the entire value to scripts.
Actual output
th respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the exchoose warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty.D
Displayed output
      th respect to the materials. The only warranties for SAP Group products and s
code written in scripts :
DEFINE &VALUE& TYPE STRING(500)
PERFORM ITEMTEXT IN PROGRAM ZDISPLAYINGITEMTEXT
USING &EKKO-EBELN&
USING &EKPO-EBELP&
CHANGING &VALUE&
ENDPERFORM
Item Text : &VALUE&
REPORT ZDISPLAYINGITEMTEXT.
DATA : name type thead-tdname,
       p_ebeln TYPE ekko-ebeln,            " Purchase order Number
       p_ebelp TYPE ekpo-ebelp.
types :strin(450).
data : p_valu type strin.
   data : p_valu1 type strin.
data: lines type table of tline with header line.
   data: IT_LINE LIKE STANDARD TABLE OF itcsy INITIAL SIZE 0 WITH HEADER LINE,
IT_TEXT1 LIKE STANDARD TABLE OF itcsy INITIAL SIZE 0 WITH HEADER LINE,
W_LINE LIKE IT_LINE.
Types : stri(450).
data f_name type stri.
FORM itemtext TABLES i_intab STRUCTURE itcsy
                       i_outab STRUCTURE itcsy.
*BREAK-POINT.
    READ TABLE i_intab INDEX 1.
MOVE i_intab-value TO p_ebeln.
READ TABLE i_intab INDEX 2.
MOVE i_intab-value TO p_ebelp.
*parameters: p_ebeln type ekko-ebeln,
           p_ebelp type ekpo-ebelp.
concatenate p_ebeln p_ebelp into name.
call function 'READ_TEXT'
     exporting
          id                      = 'F01'
          language                = sy-langu
          name                    = name
          object                  = 'EKPO'
     tables
          lines                   = lines
     exceptions
          id                      = 1
          language                = 2
          name                    = 3
          not_found               = 4
          object                  = 5
          reference_check         = 6
          wrong_access_to_archive = 7
          others                  = 8.
loop at lines. "   INTO w_line.
BREAK-POINT.
*move w_line to it_text1.
*append it_text1.
*write:/ it_line.
*p_valu = f_name.
*p_valu1 = w_line.
concatenate p_valu lines-tdline into p_valu.
*p_valu = f_name.
endloop.
message p_valu type 'I'.
READ TABLE i_outab INDEX 1.
    MOVE p_valu TO i_outab-value.
    MODIFY i_outab INDEX sy-tabix.
*loop at lines.
write:/ f_name.
*endloop.
*READ TABLE i_outab INDEX 1.
   MOVE lines TO i_outab-value.
   MODIFY i_outab INDEX sy-tabix.
endform.

Total Target Costs not updated in Process Order

Hi All,
I have a scenario in a Process Order,
The Process order is Released, Goods Issued and GR done. But the when i go and check the Cost Analysis i did not see anything in the Total Target Costs and Total Target Qty coloumns agianst all the cost elements. It show as zero for all.
It looks very strange. There is variance in the component issues and GR as well. I simulated for the same material with a new Process order and found the vales get populated automatically on GI and GR's with variation against requirement quantity.
Could any one explain me why it is so ..? or is my understanding is wrong.....?
Thanks for your time and patience.
Regards,
Srinath V

Srinath Venkatr,
I think you are missing PP CO integration configuration during master data creation. There might be information massage to you during process order creation saying , 'Logs during Cost calculation", you are skipping the same and creating process order withought resolving the same.
Check whether you followed all the steps for product costing.
Material master,
BOM,
OPKP:-Controlling area-activate components and Controll indicators
:- Assignment of co codes
KS01: Cost center
KA01/KA06:- Primary/ Secondary Cost elements
KL01:-Activity Types
KP26:- Activity Price Planning
Then Work center/Resource- assign these cost center and activities with costing formulas.
Then Routing/Recepi-
After master data, demand management,MRP- process order. while creating process order check cost calculation errors.
Hopes that will clear your dought
Tara

PR item text to be updated on Process order release

Similar Messages

Maybe you are looking for