PR no created in SRM : No valid request Found for user 0013

Hi.  I try Send PR from ECC6.0 to SRM 7.0 
I appobed the PR in BACK end but SC does not created in SRM side.
in transaction SLG1 into SRM show the next message.
No valid requester found for user 0013 .
Previously made the next configurations
1.- IN ECC6.0 has the RFC with USER RFC creates in SRM system i check the connection and working ok.
2.- in PPOMA i created a new node of Unit Orgnizational to Entry channel .
3.- I created a new RFC user and was assigned to previous Unit Organizational
4- created a new local purcharse gruops and assigned the responsability for Entry channel and product categories are introduced.
some idea what is missing to set?

Hi,
Check the below threads
[No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER    Posted: Jan;
[No valid requester found for user 0013 .   BBP_EXTREQ_TRANSFER;
[BBP_EXTREQ_TRANSFER  - No valid requester found for user 0013;
regards,
MRao

Similar Messages

  • No valid requester found for user 0013 . BBP_EXTREQ_TRANSFER    Posted: Jan

    Hi,
    We have a PDP scenario where a channel R/3 has the RFCUSER maintained and the link is established with the ECC6.0.
    When we try to send the PR to SRM the message shows the the PR is transferred but gives an error in the SLG1 as
    "No valid requester found for user 0013
    Message no. BBP_BD002"
    The SMQ1 status is ANORETRY
    TYPE : A
    ID : BBP_EXTREQ
    NUMBER : 013
    MESSAGE : Ext. requirement cannot be created, see application log.
    If you have any solution please tell me,.
    i am waiting for reply,
    Thanks in advance.

    Santosh,
    In my recent experience this SLG1 error is usually due to the RFC user being either missing, locked or not having their password set.
    Get your Basis person to check the RFC link relevant to the transfer process in TCode SM59.
    Hope this helps
    Allen Brooks
    SRM BPO
    Sunderland City Council

  • How to create a table with 5 rows ready for user entry

    Hello All,
      Can someone kindly advise on how can I achieve the above ? Everytime the table is created, the fields are not enabled for entry . I am trying to create a ytabel that consists of 8 columns. Of which 2 of them are date fields and another 2 of them are dropdown listboxes (by key).
      Thank you very much.
    from
    Kwok Wei

    Hi,
    Conside you have Valuenode which is bound to table and valueattributtes bound to Tablecolumns.
    Create a elements of the Nodetype.
    Ex: IPrivate<<ViewName>>.INodeElement ele=wdContext.create<Node>Element();
    ele.set<<Attrib1>>(Value1);
    ele.set<<Attrib2>>(Value1);
    ele.set<<Attrib3>>(Value1);
    ele.set<<Attrib4>>(Value1);
    ele.set<<Attrib5>>(Value1);
    ele.set<<Attrib6>>(Value1);
    ele.set<<Attrib7>>(Value1);
    ele.set<<Attrib8>>(Value1);
    wdContext.node<<NodeName>>.addElement(ele);
    The above statements should be in a loop so that it will add 5 rows in Table. )
    Regards, Anilkumar

  • Help creating a search field in my website for users to search within my site

    Hello .
    Basically i want a search field in my website so visitors can search withing my website for what they are looking for .
    Here is an example website of how i want my search field (search field top right if website)
    http://www.asos.com/
    So if any one can let me no what code i need or what i should do to make this search field happen .
    Im using dreamweaver cs4 . Doing the website in html and using css .
    Thanks allot .
    Rob .

    Go to Freefind.com.  Their free search engine has a few text ads on the results pages.  The paid version is add free.  Customize the look, and search features any way you wish.  After they spider your site (usually within 24 hours), people will be able to search your site. You can see a working example on my site alt-web.com
    Zoom from Wrensoft -- free up to 50 pages with tiered pricing for larger sites. Also works on intranets and CDs.
    And of course there's always Google 
    http://www.google.com/cse/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Validating in Parameters for user entry

    HI All,
    Pls write a simple code for me.
    0=0
    1=1
    2=2
    3=3
    4=4
    5=5
    6=6
    7=7
    8=8
    9=9
    A=10
    B=12
    C=13
    D=14
    E=15
    F=16
    G=17
    H=18
    I=19
    J=20
    K=21
    L=23
    M=24
    N=25
    O=26
    P=27
    Q=28
    R=29
    S=30
    T=31
    U=32
    V=34
    W=35
    X=36
    Y=37
    Z=38
    Use modulus 11 and remindr is check digit
    Example
    EIMU466000
    15*1+
    19*2+
    24*4+
    32*8+
    4*16+
    6*32+
    6*64+
    0*128+
    0*256+
    0*512
    =1045/11=95 and reminder is 0 check digit is 0
    When 11th digit enter by customer .It has to veryfy the above logic & check the riminder.
    For incorrect entry Pass the error message.
    Thanks in advance,
    Singha

    HI,
         Please try following logic
        var1 = 'EIMU466000'.
        var = strlen(var1).
        do var times.
         var2 = var1+var(1).  
         case var2.
          when '0'
           sum = sum + 0 * var.
          when '1'
           sum = sum + 1 * var 
          when.....(use all digits)
        endcase.
       enddo. 
        sum1 = sum /11.
        if sum1 > 0.
          message .....
        endif.
    Regards,
    Amole

  • ERM5.3 - X Create a valid request

    Good day All.
    The following error message appears in ERM5.3 when I want to approve a role - X Create a valid request
    All the previous steps have been successfully executed.
    I think the issue is that the intergration/workflow between CUP and ERM is not working. I have checked and rechecked the Configuring Enterprise Role Management Web Services for Compliant User
    Provisioning. It has been configured as per the config doc.
    Has anybody experianced this issue and resolved it?
    Regards,
    Michael Hannie

    The resolution is as follows -
    1.Activate your number range
    2.in CUP > Config > Miscellanous ensure that the RE workflow type (short description ERM) is
    http://<server name>:<port number>/AEWFExitServiceWS5_2/Config1?wsdl&style=document_
    pan to the left and ensure the Active option is ticked
    3.in ERM > Config > Miscellanous > Web Service Info. for AE Workflow ensure that the entry is http://<server name>:<port number>/AEWFRequestSubmissionService5_2/Config1?wsdl&style=document_
    Edited by: Michael Hannie on Dec 12, 2008 10:06 AM
    Edited by: Michael Hannie on Dec 12, 2008 10:30 AM

  • External requirement from non SAP system created in SRM 7.0 Extended Classi

    Hello SRM Gurus:
    Has anyone created an external requirement using XI ExternalRequirement_Create_In (http://sap.com/xi/EBP).  We are getting a E001 "No company code could be determined for backend  for product##".  I traced the error to FM 'BAPI_SCEC_CREATE' in class "CL_BBPX_EXTERNAL_REQUIREMENT".  What I found is that it check the attributes for BUK and updates a table with the backend EEC system.  Then it checks if any of the entries match our external non SAP system in our external requirement and since it is a non SAP system none do.  Then it sets a return error code.
    I configured our non SAP system in the SLD and in SPRO under "Define System Landscape" as a non SAP system.
    We are running external classic scenario.  We just want to created a shopping cart from an external non SAP system.  Source the shopping cart in SRM and create the PO in SRM/ECC.  We are not using a product master but creating "describe requirement" in our external system.  Our product categories are replicated from ECC and the same codes used in our external non SAP planning system.
    If I change the external planning system to the ECC backend system, the external requirement is created in SRM but when I source it and convert it to a PO, it returns a backend error that the external requirement number does not exist in ECC.  Therefore it appears all of our data from our external system is correct with the exception of how to deternine the backend company code
    According to SAP this should be possible using XI.
    Has anyone been successful doing this or can you please advise any OSS notes or documentation explaining how to do this.  Please advise if you need additikonal info.
    Thanks in advance.
    Bert

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Unable to create Warehouse Task from Warehouse Request in EWM

    Hi All,
    I have created Inbound Delivery in ERP system which created Inbound Delivery Notification in EWM and then converted to Inbound Delivery (Warehouse Request).
    In Warehouse Request screen, using follow on functions --> Warehouse Task, I have been trying to create Warehouse Task but I am facing the below error.
    There are no unpacked or packed warehouse request items for processing
    Message no. /SCWM/UI_TODLV002
    Diagnosis
    For the transmitted search criteria, the system could not find any warehouse request items or handling units for which a warehouse task can be created.
    The system can only find a warehouse request or handling unit if the following conditions are fulfilled:
    The correct process was selected according to the document searched for:
    Putaway for inbound delivery
    Stock removal for outbound delivery request
    Posting change for posting change
    Stock transfer for internal stock transfer
    The warehouse number entered matches the warehouse number in the warehouse request.
    The warehouse process type is set in the warehouse request.
    Movement control confirms that the delivery is relevant for picking.
    No warehouse requests have yet been created for all of the requested quantity.
      System Response  
    The system does not propose any warehouse request items or handling units for processing.
    The above settings already in place for me, but still I am facing the error,
    Request your help in resolving this issue.

    Hi Juergen/Sandip,
    We have material number and quantity in Warehouse Request.
    But Warehouse Request has 'Locked" indicator and PPF actions tab at item details has no details and "Validations" tab shows
    I have created "Packaging Specification" for this material but didn't pack. Do I need to pack it?
    Please suggest.

  • Purchase order Acknowledgement not create in SRM?

    Hi there,
    We are able to create Purchase order in SRM, but we don't see PO Ack generated. How do we set up PO Ack in SRM? Are we missing some configurations?
    Any help is appreciated.
    Thanks,
    Karma

    Hi there,
    We have a scenario where we trigger,from portal, in R/3 to send Orders02 to XI,XI maps Orders02 to Purchase Order to XML, and  sends to a SRM system. We see a Purchase Order being created in SRM system, and ALE AUDIT Idoc is sent to the sender R/3 system sucessfully. Now, when we "confirm" the purchase order in the SRM system, this should automatically trigger a Purchase Order Response from SRM to XI and then from XI to the R/3. This part isn't working for us. Are we missing some configurations the SRM side?
    Does anyone know how to fix this problem?
    Any help is appreciated.
    Thanks.
    Karma

  • Change the purchasing group of shopping cart created in SRM from PR in ECC

    Dear All,
    When a PR is created in ECC and transferred to SRM using program BBP_EXTREQ_TRANSFER, the purchasing group does not get assigned correctly in the SC created in SRM.
    I tried implementing Badi BBP_BADI_EXTREQ_OUT to resolve the same.
    But it is not working.
    I've passed the value 'O' to the field PROC_GROUP_OT and the puchasing group value to the field PROC_GROUP_ID of the parameter ORG_IMP. But I'm not sure wat value has to be passed to the field PARENT_GUID of the same parameter and  tried passing the PR number once and the item number once to it.
    But none of it is found to be giving the expected results.
    The purchasing group found in the SC in SRM is different from that given in the PR in ECC.
    The code that i've written in the Badi implementation is as follows.
    move transtab_imp to ls_transtab.
    ls_org_imp-PROC_GROUP_OT = 'O'.
    ls_org_imp-proc_group_id = ls_transtab-eban-ekgrp.
    read table item_imp into ls_item_imp with key item_number = ls_transtab-eban-bnfpo.
    if sy-subrc = 0.
    ls_org_imp-parent_guid = ls_item_imp-item_guid.
    endif.
    APPEND ls_org_imp to org_imp.
    Can anyone help me to resolve the issue??
    Thanks,
    Kayal

    Hi kayal,
    See the foll threads for sample code/solution:
    Re: BAdI to change pur group
    Re: Changing P Grp in shopping cart item
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Create process error 740 the requested operation requires elevation

    Hi Friends,
    I'm trying to launch Virtual KeyBoard from my application. I'm using jdk1.6.0_02. (I also tried on jdk1.3 , which throws same exception as of jdk1.6.0_02)
    try{
                Runtime.getRuntime().exec("C:\\Windows\\system32\\osk.exe");
            catch(IOException ex){
                System.out.println(ex.getMessage());This works fine on Windows XP , but on Windows Vista it throws exception :
    Can not run Program "C:\Windows\System32\osk.exe" :create process error 740 the requested operation requires elevation
    It works on Vista if I turn off user Account control from User Account in ControlPanel.
    While If I try to launch (Calculator)Calc.exe instead of (Virtual KeyBoard)osk.exe then it launch successfully without turning off User Account Control.
    Does any one has an idea how can I launch Virtual Keyboard ("osk.exe") without turning off user Account Control on Windows Vista.
    I'll appreciate any help regarding this topic.
    Thanks.

    Thanks for your promt reply.
    The llink you write is not launching the page.
    My question is why it launching Calculator without any privillage, while it has problem in launching Visual KeyBoard.
    Thanks

  • RFx Header Target Value in Sourcing  is Zero for RFx created in SRM Manually

    Hi All,
      We are facing the issue with RFx Header Target Value, before proceeding with question , like to share our scenario's
    We are using SAP SRM Classical Strategic Scenario.  and below are two possible ways.
      Case1)ECC PR - SRM SC (EXTR-BUS2121) - SRM RFx(BUS2200) - SRM RFx Response(BUS2202) - > ECC PO.
      Case2)ECC PR - SRM SC (EXTR-BUS2121) - SRM RFx(BUS2200) - SRM RFx Response(BUS2202) - > SRM Contract - ECC Contract.
      Case3) SRM RFx(user create RFx directly in SRM ) - SRM RFx(BUS2200) - SRM RFx Response(BUS2202) - > SRM Contract - ECC Contract.
      Case4)SRM RFx(user create RFx directly in SRM ) - SRM RFx(BUS2200) - SRM RFx Response(BUS2202) - > - > ECC PO.
       Now for cases  1 & 2 ,  Target Value in the RFx Header is populating correctly ,but  for Cases 3 & 4 where the RFx is directly created in SRM  ,the Target Value field is visible and editable in the RFx Header ,but when we enter some value and go to other tab, like bidder, the "Target Value" is getting cleared.,
      Can any help to understand this  SAP behavior of application ,Is this SAP standard? or is there is any miss in our configuration.? Kindly provide some inputs on this. I also cross checked the notes
    Thanks
    Channa

    Hello Channa,
    There is note 1992525 and 1712226.
    Please refer to the note 2037465 for important information about pricing.
    This note has all information about pricing in SRM for different scenarios.
    Best regards,
    Rohit

  • TS2446 I have this email with this adress request account update.Is this a valid request from Apple?AppleID@customers.appstore.70.ca

    Hello I have this email requesting to update account information.Was wondering if it is a valid request or fraudulent?

    Apple will never, except for some customer surveys which will never ask for personal information, never uses a domain other than their own apple.com domain, and never asks you for account information in an email. As stedman said, it's a phish. Delete it and do not respond to it in any way.
    Regards.

  • Error creating AIR file: Unable to build a valid certificate chain for the signer.

    Hi, My boss got a certificate from Thawte, and I'm getting this error message when building my AIR app.
    Error creating AIR file: Unable to build a valid certificate chain for the signer.
    I'm on windows XP.
    thanks,
    steve

    To manage your code signing certificate, please see
    http://www.adobe.com/devnet/air/articles/signing_air_applications_print.html
    The error you are seeing is typically caused by exporting a cert without the trust chain.   On Windows, in IE, you can manage your keystore by going to
    Internet Options > Content > Certificates
    When you export the certificate needed for signing your app, be sure to check “Include all certificates in the certificate path, if possible”.

  • The address is invalid. Please create or select a valid address

    Hi all,
    I have created one B2b user, under business customer, but I got this "*The address is invalid. Please create or select a valid address*" error in shipping page when checkout the process. But the same address is working for billing page, and it rise the erro for shipping page.
    Please help, Also how to check customer "*site use shipping assigned to this address*" or not.
    Also how to check the site use for this address?
    Please help.
    Thanks ,

    Hi,
    Correct to disable set the profile option to No for no validation.
    You can reference Release 12 Address Validation documents -
         Setting Up Geography Hierarchy And Address Validation In Release 12 (Doc ID 554492.1)
    Customer Site saved with invalid State, County, City, Postal Code combination although Validation setting is Warning (Doc ID 1379658.1)
    Happy New Year,
    Deborah

Maybe you are looking for