Pre-Built EBS Analytics with BAM and EBS adapters on FM

Are there any pre-built business analytics dashboards/ reports installable in BAM SOA 11g for Oracle EBS 11.5.10?
If so, where do I download and what other components are required to publish these?
Thanks
Edited by: user6739500 on May 21, 2010 3:08 PM

Hi there
I have a Technote that shows how the information can be published from EBS to BAM. In addition you could create an end to end visibility across the products e.g. B2B - BPEL - EBS - Financials etc by raising the events to BAM .
There is no out of the box dashboards available today. However, i have a number of customers who are doing this use case by themselves or through some SI/Oracle consulting.
can we contact you offline to discuss your requirement?
http://www.oracle.com/technology/products/integration/bam/11g/technotes11g/whitepaperBAM_E-BusinessSuiteIntegration.pdf
There are certified adapters available for EBS to FM as well.
Regards
Payal
Edited by: PayalS on May 21, 2010 4:25 PM

Similar Messages

DNS Registration for clients with WLAN and LAN adapters

I have read a number of articles and it seems that there are a number of people who have problems with DNS and workstations with both WLAN and LAN adapters. I haven't however found workable solutions.
Workstation Connection Objective:
To enable DNS discovery and Ip connection to client workstations regardless of whether the client is using the WLAN or LAN. Enabling users to use either Wireless or LAN adapter adhoc. ie they dock their laptops at their desks, and undock to take their laptops
to meetings or consulations with peers. I need to be able to discover and connect to the workstations irrespective of the adapter being used at any time.
Most people seem to try to control which interface is used on the workstations, ie disable WLAN and only use LAN etc. Trying to disable interfaces isn't going to be feasible and its very inflexible.
I believe I can ensure that the workstations use the NICs in our preferred order:
1. LAN
2. WLAN - Our wireless network isn't as fast as the LAN.
By setting specific DHCP metric for the WLAN Router to be higher(ie 2) than the LAN(1). When the LAN isn't connected traffic will route via the WLAN adapter and when the LAN adapter is connected, its router metric will be lower and it will be the preferred
gateway/route.
But how do I solve the DNS resolution for connection to that asset?
If I disable DHCP Server updates into DNS and allow secure updates from the client. It would be really good if DNS client behaved in the following manner
1. The LAN adapter(referred to as primary ie LAN) with the lowest metric(ie 1) registers/auto updates DNS with the ip(both A and PTR). Any other Adapters don't register. - ie the WLAN
2. The Laptop is undocked and the LAN adapter goes offline, the DNS Client then triggers a registration/auto updates its existing DNS entry with the ip from the next adapter(WLAN) with the next lowest gateway metric(2)...hence replacing the first ip registered.
3. The laptop is docked again, and DNS Client triggers a registration/auto updates its existing DNS entry with the IP from the primary adapter(LAN), replacing the WLAN ip.
So there is only ever 1 ipaddress registered for a workstation and it will always be a valid address. Then I don't need to be concerned about whether the user has the wireless turned on and docked.
Being able to discover and communicate with all our workstations in our sites is crucial requirement....
This microsoft article says, http://technet.microsoft.com/en-gb/library/cc771255.aspx
Dynamic updates can be sent for any of the following reasons or events:
    * An IP address is added, removed, or modified in the TCP/IP properties configuration for any one of the installed network connections.
    * An IP address lease changes or renews with the DHCP server any one of the installed network connections. For example, when the computer is started or if the ipconfig /renew command is used.
    * The ipconfig /registerdns command is used to manually force a refresh of the client name registration in DNS.
    * At startup time, when the computer is turned on.
    * A member server is promoted to a domain controller.
However from what I am reading, both adapters(LAN,WLAN), if configured to update DNS, will register their Ip addresses. Which leads to an invalid DNS entry if the laptop is undocked, as the IP for LAN adapter isn't removed.
Has anyone solved this problem for their organizations without
1. Controlling which adapter is used - large management overhead
2. Only allowing one adapter to register with DNS
   - If using LAN adapter for DNS, then anytime the user is using WLAN, their workstation doesn't have a valid DNS entry. Which also impacts Kerberos.
   - If using the WLAN, then we would have to invest a large amount of money into Wireless to provide the necessary bandwidth
3. Setting GPO's to configure dns updates every 30mins on clients
   - Inconsistent results...which I think is sometimes a worse problem
4. Defining separate DNS suffixes for their WLAN networks (I read some people did this)
   - This doesn't remove an invalid DNS entry ie the ip(LAN adapter) DNS entry if the laptop is undocked
   - It also creates problems with kerberos, if the host is registered under a separate DNS suffix from the Active Directory domain name

Hi,
From my point of view, DNS can't be so smart.
As a workaround, please try the steps below,
Disable the DNS register of wireless adapter
Put "ipconfig /regiserdns" in a bat file
Everytime when the wired network is undocked, run the bat file.
If the wired network is docked, wired adapter will register the DNS record.
When the wired network is undocked, run the bat file, then the wireless adapter will register the DNS record.
If the wired network is docked again, wired adapter will register the DNS record automatically.
Best Regards.
Steven Lee
TechNet Community Support

Pre-Built EBS VM

at least content :
1- Oracle EBS R12
2- Oracle Database 11g Release 2 Enterprise Edition
3- preferred windows Edition

EBS OVM templates are available here -
http://www.oracle.com/technetwork/server-storage/vm/templates-101937.html
Pl note that OVM install destroys the host OS -
Re: Can I use OVM templates with VirtualBox
Re: Is it possible to install eBiz12.1.3(64bit) vm template on virtual box(lap)
Oracle VM server and Manager on laptop?
John has blogged about an unsupported method to convert OVM templates to Virtualbox
http://only4left.jpiwowar.com/2012/12/1hr-ebs-sandbox/
HTH
Srini

Need Fastest Built in router with wireless and no problems

I have tried the WRT110 and 160 it seems the 310 or even the 350 are slow to my previous Wired lan. Problem is I am transferring files using the Wired portion of the WRT series and no using the Wireless. So in theory it should be quite fast but they are like 35+ % slower than my 8 port DSL router of 8 yr old. Any advise?

Try disabling the firewall & antivirus on the wired computer ... See if the file transfer works or not ...

Email activity for soa and bam with pre-built virtualbox images

Dear OTN,
i am running pre built virtualbox image for soa and bam and want to run with email activity and configure the email inside the virtualbox can anyone help me with email activity in pre-built virtualbox image.
Thanks & Regards,
Pavan

Hi there
I have a Technote that shows how the information can be published from EBS to BAM. In addition you could create an end to end visibility across the products e.g. B2B - BPEL - EBS - Financials etc by raising the events to BAM .
There is no out of the box dashboards available today. However, i have a number of customers who are doing this use case by themselves or through some SI/Oracle consulting.
can we contact you offline to discuss your requirement?
http://www.oracle.com/technology/products/integration/bam/11g/technotes11g/whitepaperBAM_E-BusinessSuiteIntegration.pdf
There are certified adapters available for EBS to FM as well.
Regards
Payal
Edited by: PayalS on May 21, 2010 4:25 PM

Update java version in pre-built developer VM

Hi all,
I got a VirtualBox from Pre-built Developer VM: Oracle WebLogic Server Development . I've got a webapp I want to test on that, but it's java 7. Does anybody have a clue as to how I could update the JDK on that instance? Yum doesn't seem to be able to find any openjdk packages. Java 6 seems a bit old: Oracle Java SE Support Roadmap so I think my request should not be that extraordinary?
Groeten,
Friso

user8939870 wrote:
Hi All,
Database App Development VM.
Can anybody help me in getting the above mentioned Pre Built Developer VM in CD/DVD form.
Thanks in Advance.
Vijaykumar S
Edited by: user8939870 on May 25, 2012 11:48 PMWhenever I need software from a company, I start at that company's home page. In this case that would be 'www.oracle.com'.
On that page I see a menu tab labeled 'Download'.
hovering on that tab brings up a selection menu, with one area called 'popular downloads'.
Within the 'popular downloads' section, there is a link called 'Pre-Built Developer VM's'.
Clicking on the 'Pre-Built Developer VM's' link brings up a list of available pre-built vm's, with a download link for each.

Pre built Developer VM required,

Hi All,
Database App Development VM.
Can anybody help me in getting the above mentioned Pre Built Developer VM in CD/DVD form.
Thanks in Advance.
Vijaykumar S
Edited by: user8939870 on May 25, 2012 11:48 PM

user8939870 wrote:
Hi All,
Database App Development VM.
Can anybody help me in getting the above mentioned Pre Built Developer VM in CD/DVD form.
Thanks in Advance.
Vijaykumar S
Edited by: user8939870 on May 25, 2012 11:48 PMWhenever I need software from a company, I start at that company's home page. In this case that would be 'www.oracle.com'.
On that page I see a menu tab labeled 'Download'.
hovering on that tab brings up a selection menu, with one area called 'popular downloads'.
Within the 'popular downloads' section, there is a link called 'Pre-Built Developer VM's'.
Clicking on the 'Pre-Built Developer VM's' link brings up a list of available pre-built vm's, with a download link for each.

TFS with VS2013 and MTM, for CodedUITest test-cases.

Hello!
I have a blocking issue: TF900558: This build process template cannot be run on a build server Default Controller - <servername>. Upgrade this build server to a newer version.
What I am trying to do, is get some pre-'captured' CodedUItests done with VS2013, and use MTM as the 'front-end' in order to run test-cases and report, by associating some test-cases with these CodedUI elements.
Now, I have the latest version of VS2013 installed on a virtual-machine, which contains my test-environment which tests webpages. TFS is a little older and cannot be upgraded right now, as the team are just too busy.
It seems a potential work-around, is to change 'the template' so that it matches what is used by TFS.
Anyone any idea how I should go about this, and if my theory is sound (if not ideal)?
I could really use some step-by-step-guidance here, and have email rather than keep adding to this thread, until resolved.

Hi MonsoonMally,
Based on your description, you might use a build process template which is newer than the TFS build controller/agetnt. You can upgrade your TFS on your build machine or use the old build process template that match to build controller.
To upgrade your build controller, you can refer to this blog for more information:http://blogs.blackmarble.co.uk/blogs/rfennell/post/2014/02/01/Upgraded-older-Build-and-Test-Controllers-to-TFS-2013.aspx
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Integrating Oracle EBS and ApEx Aplication with Responsibilities and SSO.

Good day all.
I am looking forward from getting somebody 's help, the trouble I am facing is described below:
a) I am currently working on SSO with EBS. I mean, my users can connect and work perfectly.
b) ApEx is Configured as Application Partner with SSO, and the application we built (it's call PR-Auto)
is working good under SSO platform. I mean I am able to login using TEST user and password TEST in
both applications (EBS and PR-Auto).
c) The thing is that I need to call PR-Auto from one responsibility in EBS;
Following my setup for the responsibility:
- I have created a function:
Name: APEX_FA_PR
Properties:
Function type: SSWA plsql
Web HTML :apps.apex_launcher.launch_fa_pr
Web Host agent: pls/apex
- I have created a menu, application and responsibility using the function APEX_FA_PR.
- I have create launcher package:
create or replace package apex_launcher is
procedure launch_fa_pr;
end apex_launcher;
create or replace package body apex_launcher as
procedure launch_fa_pr as
begin
/** 110 Is ID of PR-Auto, my app **/
/** 5 is my home page **/
f(p=>'110:5');
end;
end apex_launcher;
d) New responsibility shows on EBS menu page.
e) Click on responsibility, and the page shows 'redirecting to login server for authentication', but
nothing happens, page goes blank with this url:
http://fahorromex37.fahorro.com.mx:8004/pls/apex/wwv_flow_custom_auth_sso.process_success?urlc=v1.2~42
03F9A8A1D696097BEA96499E6B6845E80C14A56DF724C3FFF879578FC734C5E1DEEA9129A4117E62A3676A409528E8EB927AA55
0EA7B208C34F5A3FDB4472679EDE448F8971966BE9BADD22207FE90BDBA2800E6529F3967A18DEC76DCC17DE21D96A65CA2C424
319F159CC78ED78E8B99F69F1BA8297A1EECF6AD137A6C3896E1C4E8D5F93874A9A08887D3F95058D33F667D7B785FF0A065B53
891B8B393DFD24530BD0720150F05DE63F0CD5AFD86F0267BAF4C9CAE8C5AA693B4E488B3776BF43450FD412167B402C962BABE
A54707043AFA6FBB168B29EDB3BE120FFE0C30683D53283B036E781ABF1A5F7374ADF83463D57D2EE958765B0501CE2B0F4E3DF
24845A54A1CF02526FA39EF60644ED5A0D9D2A05EBFAD3BD01007D0817135989A4B97D68C92C6E2BA767CFDB0AF188054024BB1
EFFA7DEC8699BBA7485A349D87BA1C15475927E52110DF56FCC3FD560D2CBBA1C0D7D9D3ADFCDB975CD2
the address of my application pr-auto is http://fahorromex37.fahorro.com.mx:8004/pls/apex/f?p=110
f) DBA teams follow instructions from the following documentation
"Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On"
and "Note 261914.1 Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and
Oracle Single Sign-On"
g) We are using:
DB: Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
SO: Linux 2.6.9-42.ELsmp
ApEx: 3.0.1.00.07
Any help will be greatly appreciated.
J.O.

Many Thanks Daniel for your prompt reply.
Tried to understand the white Paper and your thread but I am still facing problem,although able to Call ApEX page but now i
want to pass th e session Id where I am stuck.
MY three functions:
CREATE OR REPLACE FUNCTION SYMAPEX.apex_authorise (
p_username IN VARCHAR2
, p_password IN VARCHAR2) RETURN BOOLEAN
AS
BEGIN
IF apex_validate_hash (p_username, p_password) THEN RETURN TRUE;
END IF;
RETURN (FND_WEB_SEC.validate_login@VCSDEV2_QA (p_username, p_password) = 'Y');
END apex_authorise;
CREATE OR REPLACE FUNCTION SYMAPEX.apex_generate_hash (
p_string IN VARCHAR2
, p_offset IN NUMBER DEFAULT 0) RETURN VARCHAR2
IS
BEGIN
IF p_string IS NULL THEN RETURN NULL;
END IF;
RETURN RAWTOHEX(UTL_RAW.cast_to_raw(
DBMS_OBFUSCATION_TOOLKIT.MD5(input_string=>p_string||':'||
TO_CHAR(SYSDATE-(p_offset/24*60*60),'YYYYMMDD HH24MISS'))));
END apex_generate_hash;
CREATE OR REPLACE FUNCTION SYMAPEX.apex_validate_hash (
p_string IN VARCHAR2
, p_hash IN VARCHAR2
, p_delay IN NUMBER DEFAULT 5) RETURN BOOLEAN
IS
BEGIN
FOR i IN 0..p_delay LOOP
IF p_hash = apex_generate_hash (p_string, i) THEN RETURN TRUE; END IF;
END LOOP;
RETURN FALSE;
END apex_validate_hash;
MY Launch Procedure:
CREATE OR REPLACE Package body OAE_PKG1 AS
PROCEDURE LaunchOAE1 (application IN NUMBER DEFAULT 101
, page IN NUMBER DEFAULT 111
, request IN VARCHAR2 DEFAULT NULL
, item_names IN VARCHAR2 DEFAULT NULL
, item_values IN VARCHAR2 DEFAULT NULL)
AS
BEGIN
OWA_UTIL.mime_header('text/html', false);
OWA_COOKIE.send
(name=>'APEX_APPS_'||application,
value=>FND_GLOBAL.user_name||':'||apex_generate_hash@QA_VCSDEV2(FND_GLOBAL.user_name),
domain => '.orvcsd01.symprod',
path=>'/');
OWA_UTIL.redirect_url('http://orvcsd01.symprod.com:7780'||'/pls/apex/f?p='||application||':'||page||'::'||request||':::'||ite
m_names||':'||item_values);
END LaunchOAE1;
END OAE_PKG1;
MY On Load before headre process:
DECLARE
c OWA_COOKIE.cookie;
a wwv_flow_global.vc_arr2;
BEGIN
c := OWA_COOKIE.get('APEX_APPS_101');
a := htmldb_util.string_to_table(c.vals(1));
:P111_USERNAME := a(1);
:P111_PASSWORD := a(2);
IF :P111_PASSWORD IS NOT NULL THEN
wwv_flow_custom_auth_std.login(
P_UNAME => :P111_USERNAME,
P_PASSWORD => :P111_PASSWORD,
P_SESSION_ID => v('APP_SESSION'),
P_FLOW_PAGE => :APP_ID||':111');
END IF;
END;
I am doing custom authencitaion and calling apex_authorise function there.
Although I am able to Call the ApEX and able to validate application server password,but moment i try taking help off cookies
to pass on my application session details to ApEX so that users would not have to login twice,i am gettign the error.
Second question:
Do we have any other methos of passing session to ApEX from Application server other than cookies.
Please suggest.
Thanks.
Ravijeet

HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

HI FOLKS,
I WANT TO SEE DATA IN THE REPORTS OF PRE-BUILT ANALYTICS DASHBOARDS? EG: AUTOMOTIVE, SALES, SERVICE DASHBOARDS. SO WHAT IS THE COMPLETE PROCESS TO SET UP THIS ENVIRONMENT. I'M USING SIEBEL ANALYTICS VERSION 7.8.5.
THANKS IN ADVANCE
VJ

Hi,
I am new to Business Intelligence Applications and keen on learning it.
I know Informatica and OBIEE(Not a very experienced person).
I have installed BIA on my local windows machine.
I am using Oracle Apps as the source.
In the execute tab I selected the HR-Oracle 11510 execution plan and ran it but it failed.
The workflow error log says the following:
"ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6193 [Error occured during expansion of DB connection parameters [Database connection name DataWarehouse for database connection variable $DBConnection_OLAP is not well defined.
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: CMN_1761 [Timestamp Event: [Tue Feb 26 15:59:35 2008]].
ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6226 [ERROR: Failed to initialize session [SIL_InsertRowInRunTable]].
ERROR : LM_36320 [Tue Feb 26 15:59:37 2008] : (1276|3864) Session task instance [SIL_InsertRowInRunTable]: Execution failed.
WARNING : LM_36331 : (1276|3864) Session task instance [SIL_InsertRowInRunTable] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_InsertRowInRunTable] will be failed.
ERROR : LM_36320 : (1276|3864) Workflow [SIL_InsertRowInRunTable]: Execution failed."..
I think I have missed few steps here and there.. I am struck up here.. I don't know what to do... I think its the problem connecting to the source and target schema.. can you please help me out?

Best Practices to configure the connectivity with Bank and EBS

Hi All,
We are working on a requirement where Middleware(SOA) has to read the file from Oracle E-biz server and send it to BANK.
For Connectivity setup between Oracle E-biz and Middleware(SOA), Middleware(SOA) and BANK do we need to use oracle as user or we can use any user to communicate between E-biz and Bank?
Could you please share best practices/documents if you have any on how we should establish the connectivity and setup the workflow with Bank and E-Biz. E-Business
Thanks & Regards
Narendra

Hi Narendra,
Oracle User and the FTP user are 2 different users.
I'm assuming you'll be reading the file from R12 through File Adapter and writing it to Bank using FTP Adapter.
Oracle User is able to login into R12, do some operations, submit some concurrent programs/requests based on responsibilities and generate the file to be transferred (like in my case it did by running a Concurrent Request). The file so generated should be placed at a location from where File Adapter can read it within the BPEL process. Now to read the file, the user that is used is a SOA server user (again different from R12 user). This is the same user that you use to login into your SOA server physical box. Hence to be able to read the file, your file should have appropriate privileges (we set that as 777) so that it can be read by the SOA process (using SOA user).
FTP user, on the other hand, is the user that allows connection to Bank FTP server. This has absolutely no connection with R12. Bank who hosts the FTP server must give you the FTP user details that you'll use inside your FTP JNDI Configuration on Weblogic. When you deploy and run your process (you don't deploy adapter), it picks up the connection details from FTP JNDI properties that you defined in weblogic.
Hence both the jusers can be different and I don't think any best practices are required or do exist for this.
Regards,
Neeraj Sehgal

Failing to assemble Downloaded Pre-built Virtual Machine for SOA Suite and BPM Suite 11g

Hello,
I checked the download checksum of the files downloaded for Pre-built Virtual Machine for SOA Suite and BPM Suite 11g ( Pre-built Virtual Machine for SOA Suite and BPM Suite 11g ) and they all match checksums.
however, when I try to assemble them with 7zip, I get a corrupt error message. I have tried downloading with Chrome and Internet Explorer. I have also tried assembling the 7zip files different ways.
Is there anything else I should try?
Running on Windows 7, 64 bit machine. (with lots of disk space).
Is there any other way to get the files?
thank you.

thanks for the response
I guess I will have to do that as well.
However, it defeats the speed with which can ramp up with the toolset; thus slowing my time I can allocate to learning it...

How to view pre-built Dashboards and Reports of Oracle BI- Apps?

Hi All,
We have sucessfuly installed and configured the Oracle Apps, and also we configured the OracleBIAnalyticsApps.rpd and we are able to view the different subject areas.
But we are facing problem in viewing any prebuilt dashboard or report.
Is it possbile to view pre-built Dashboards and Reports of Oracle BI- Apps if we dont have any ERP applicaton as a source?
As we dont have any ERP application we have loaded the data from the sample flat files to the Analytics warehouse.
Any help would be highly appreciable.
Regards,
Manmohan Sharma

Hi Damon,
Thanks a lot.
Now I understand that we have to have ERP data source if want to view the prebuild Dashborads and reports.
Could you please provide the path to get Prebuilt Dashboard & reports ?
Regards,
Manmohan Sharma

Is there a pre-built VM with just Oracle Linux?

I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.

881656 wrote:
I want to try out installing Oracle Database 11gR2 on a Virtualbox without going through installing Oracle Linux in a Windows Host so I'm looking for a pre-built VM with just Oracle Linux. Most of the VMs available in Pre-Built Developer VMs (for Oracle VM VirtualBox) http://www.oracle.com/technetwork/community/developer-vm/index.html already have Oracle Database installed. It seems that my only choice is to use Enterprise Java Development VM. I notice there is something called Oracle VM template but it does not seem to be for Virtualbox. Thanks for any help.
I would second Bjorn's suggestion to just go ahead and install Oracle Linux from scratch. As a DBA you need to be familiar with a lot of OS level admin stuff, so installing the OS from scratch and doing the minimal configuration needed to install Oracle is, in itself, an important part of your professional development. If you take a shortcut of using a pre-built vm you are just stunting your own growth.

Bpel-config.xml and soa-infra-config.xml file location in SOA 11g Pre-built

Hi frnds,
I have downloaded and started Oracle SOA 11g Pre-built from http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html and trying to configure it according to my requirements to upgrade from SOA 10g to 11g. But I can't find bpel-config.xml and soa-infra-config.xml files in BPEL domain home (i.e. /oracle/fmwhome/user_projects/domains/domain1).
Can you please help me?
BR, Lisan

None of those roles are intended to be granted to application users. Those are instead to limit various operational / support responsibilities. For instance, if you have "operators" for your production environment who are responsible for starting & stopping servers vs "Administrators" who are performing configuration changes, etc.
The SOA* versions can be used to separate even further - an "Operator" ( with rights in the WL console ) can be distinct from a "SOAOperator" ( with rights in the SOA /em ), etc.
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10226/appx_roles_privs.htm#insertedID2
also, here is a bit more on soa-infra roles:
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10226/appx_users.htm#insertedID4

Pre-Built EBS Analytics with BAM and EBS adapters on FM

Similar Messages

Maybe you are looking for