Pre-populate and post populate fields

What is the difference between pre-populate and post populate fields.
How we test the pre-populate and post populate fields.

Parth, one problem with your approach is he will submit PDF and therefore you won't be able to put the PDF in a variable that's suppose to contain just xml.
The prepopulation should be the same. If you start off with an xdp, then you will call a render service that merges data with your xdp to create a PDF.
Now when you submit, you will submit the entire PDF back in the Document Form variable. In Workbench, you can use the FormDataIntegration service to extract data from that PDF that's being stored under Document Form var/object/document and put it in an xml variable. Then you can just use xPath to do your condition.
I'm assuming you'll just pass that same Document Form variable to the next step, because if you do any change to the PDF it'll brake the signature.
Let me know if I missed anything.
Jasmin

Similar Messages

What are Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

BW on HANA : Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
Kindly help us in getting the exact course of action as requested.
Thanks and Regards,
Lavina Joshi

Hi Lavina,
try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
Points to remember are:
Preparation:
     -- Hardware Sizing
     -- Preparation of Data Centres
     -- HANA Hardware preparation
     -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
     -- House Keeping activities on BW system (data clean up, etc)
Post Installation:
     -- Sanity checks / Preparation and License checks
     -- JAVA Configurations
     -- Infoprovider conversions
Overall Stages are described below:
# Environmental setup (HANA box)
     -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
# System readiness
               - ZBW_HANA_COCKPIT Tool
               - ZBW_HANA_CHECKLIST Tool
               - ZBW_ABAP_ANALYZER Tool
               - ZBW_TRANSFORM_FINDER Tool
               - SIZING Report
               - System Clean up Activities
               - Impact of 7.4 on source system checks
               - Java Upgrade for portal
# DMO Stages
               - Preparation & Pre Migration checks
               - Execution / Migration
               - Post Migration Activities
# Testing Phase
               - Source system checks/Activities
               - System and Integration Testing
               - End to End Testing
               - Performance testing
               - Reports
               - BO reports / Interfaces
Do let me know if you require any further information.
Regards,
Naren

I need to organize medical photos. They are pre-op and post-op photos. What is the best way to organize them. should I use iphoto or is that too much trouble.

I need to organize medical photos. They are pre-op and post-op photos. What is the best way to organize them? should I use iphoto or is that too much trouble? Since they occur on different days, organizing by event does not seem appropriate. Also, organizing by face is not always possible as some are close up photos of an individual eye. Surely, this has been done before, and I don't want to spin my wheels reinventing this.

Who can tell with that amount of information to work with?
iPhoto is not limited to Events or Faces as organizational tools - Albums, Keywords, various forms of metadata can be leveraged for use as well, and these are often more flexible. Really it's up to you to look at the tools available and see if they suit your usage scenario.

Networkmanager dispatcher - no pre-up and post-down support

Hey guys,
i swichted some weeks ago from ubuntu to arch, and my system runs like it should. with one exception. Cause im using arch on a laptop und change locations (my home, university, parents house, ..), i wrote i little dispatcher script that do diffrent things based on the essid i connected to. But i recognized that the dispathcer only use the up and down action. is there a possibility to add the support of pre-up and post-down actions, or anything similar? i red that netcfg can do this, is ther a way to combine it?
greetz corubba
EDIT: i noticed that the action up is called after the interface is up, and down after it is brought down. So im looking for a pre-up and pre-down action.
Last edited by Corubba (2010-11-15 13:20:45)

Corubba wrote:Hey guys,
i noticed that the action up is called after the interface is up, and down after it is brought down. So im looking for a pre-up and pre-down action.
hi all,
in the past days I also trid this out and you are right: in "pre-up" is called _after_ a connection have been established to a network, exactly like "up" does.
should we maybe fill a bug in orger to get this fixed?
regards,
Guglie

Pre invoice and Post invoice

Hi All,
What is the difference between Pre Invoice and Post Invoice?
regards
shashikanth naram

Hi,
When 'GR-based IV' is flagged in PO, Now when GR posted with reference to PO item serves as reference document for follow-on postings. This Ref Doc-LFBNR is linked to invoice posting,This assignment between GR and invoices can be seen PO history tab -GR/IR assign
when GR based IV is not ticked then the LFBNR is blank, hence it will not propose any value in Miro
Please also refer following note
1827732 - Valuation when GR-Based IV (EKPO-WEBRE) is set in the PO item.

Pre-export and post-import tasks

oracle8i/windows 2000 server.
i would like export my database from my organisation and import into my local
machine at home.
what are the precautions,tasks and post tasks
,i have to take during import and export.
c.santhanakrishnan.

Why are you exporting your organisations db to import at home? Are you aware of the privacy issues this raises? Do you have approval from your organisation?
Exporting -
o NLS_LANG is set correctly
o Available space on disk
o consistent = y
o recordlength=65535
o direct=y
o log=<logfile_name>
o do you require grants, indexes?
o A feedback for progress,
o But even with consistent = y that is table consistent and there is a probability you may run into a problem with FKs (usually when exporting large amounts of data) and tables in the beginning of the export have child tables near the end of the export which (the child tables) have records inserted during the export which won't have a parent record on import and will be rejected.
Importing -
Some depend on the data volume. Do you want to -
o NLS_LANG is set correctly
o drop, re-create indexes to speed up import
o put the database in NOARCHIVELOG (if possible)
o need to also create public synonyms
o check triggers and if they will fire?
o need to create the schema/user to import (if it doesn't exist in the import database and is not a full export) ?
o do the tablespaces that the export was taken from exist in the import database?
o disable/enable FK constraints
o enough UNDO space
o enough archive log space (if in ARCHIVELOG mode)
oset a buffer (size depends)
o set a feedback to monitor progress (or check rows_processed in v$sql)
o if data already exists in the tables, does it need to be truncated (which raised other issues, constraints etc, take a backup prior to truncate?)
I probably missed stuff too.

Storing by trigger with pre time and post time

hi,
I am acquiring sample rate of 1000 samples/sec. i am using digital inputs for storing start and stop. when the digital input is high it should start storing and accordingly user has to specify the number of samples or time and data appended before storing starting. i.i pre time or pre samples has to be added before start storing the data. also for stop storing the data post time or samples has to be added.
how to do this..? can i have a sample vi?
Regards,
Balaji DP

may be its helpful to you,By using value signaling we can generate the event whenever true occur in Digital input channel (daq),in that particula event case we can append the old data from file like tdms etcc.
Attachments:
1.png ‏14 KB

What is the Difference Between the Pre-Upgrade and Post-upgrade in UMT in SAP BO

Could anyone give me details.

UMT is used to upgrade and migrate from older version to newer version.
There is no pre or post migration terms used for UMT.
Check the guide for more information.

Thinking of pre installation and post installation

Hi,
I understand the following is very common question, but I need to know the answer specific to my case.
my case:
My production database has around 100 tables in a single database/instance (no clusterred yet); 3 of tables are growiing very fast, in less than 1 month can use more than 1TB hard disk space, and we have to keep 6 months' data (so in a half year, disk space will be used up 6-10 TB by these 3 tables; every day there are lots of operations on these tables, update, insert and query (no delete, every operation invoked heavy API stored precedure.
questions.
1. if applying cluster, installing in 2 nodes, 5 nodes, 10 nodes, can I expect linear performance increasing to 15%,18%,20%?
2. install nodes in one physical box (usiing vmware) better or 1 node 1 box better, in terms of performance?
3. afer installing Grid, the database install in one of those node or iin another box?
4. any doc telling how to install/configure the database upon cluster/nodes?
Thanks
John

992202 wrote:
Firstly install nodes, to be able to build up a cluster, on top of it, install multiple database instances, then we can configure a RAC database, which will still look like a single database from external client point of view.Correct. Grid installation first to build the cluster. Then RAC installation to provide a cluster database infrastructure across grid nodes. Then create a physical cluster database with a database engine on each cluster node.
now going to the point how I think and expect performance increasing against my case.
without clustered database (say in a standalone or singleton instance), executing 100 database operation (query, insert, update, by calling API, stored procedures) takes 5 minute; now in RAC database in which 5 nodes, 5 database instances in 5 physical machines, 100 operation may distribute to all nodes, namely each database instance may just need to handle 20 request (ideally); this way performance should be increased lots.Emphasis on should.
Yes, RAC provides for scalability. However, no cluster (RAC and anything else) is capable of simply taking any program (or stored procedure), and make that now run faster across multiple cluster nodes.
The program (stored proc or SQL in RAC's case) need to be able to run in parallel, deal with concurrency, and do this in a thread-safe way. The cluster provides the tools for this. The program needs to support or use these tools.
And, I also think, in 10 nodes cluster, it's better that installs 10 database instances than installing only 5, in terms of performance.Of course, you want to use all cluster nodes. But you can for example create server pools in the cluster and more than one cluster database - and run these on your cluster. A cluster does not necessarily mean only supporting a single cluster database.
A report shows CPU usage is very high constantly during executing (now we use 32 CPU in one box), however I/O and network usages look normal.Unlikely that a RAC will do better in this case - running processes within the same h/w boundary on 32 CPUs will usually be faster than running the same processing across 16 server nodes, with 2 CPUs per server.
Can I still expect linear performance increasing? if no, what can RAC database help me out, or any other way can help me my case?As I said - RAC provides incredible scalability (e.g. my biggest RAC does up to 35,000 rows inserts per second, and uses parallel processing to process 30+ million row data sets using several table joins in less than 120 seconds).
But for any cluster - scalability needs to be part and parcel of the software loads run on that cluster. If the workload of the software cannot be parallelised, if workloads are not designed to be scalable, then no amount of clustering will improve the runtimes of such workloads.
My suggestion is to first identify the CPU related performance problem you have. You need to know WHAT the problem is, in order to decide on how to address it. And whether RAC is a solution to the performance problem.

Pre and post sql

Hi xperts,
what is the functionality of Pre SQL and Post SQL in source Qualifier Transformation??
Thanks,
pcs

Hi,
Pre SQL is the sql statement to be executed before perfoming the mappings on the target table and post is to be executed after performing the tasks.
post sql is that if any errors occur we can send an email or write logs to know the error.

Pre populate the Primary contact field on Activity when created from an opp

Is there a way to auto populate the Primary contact field when a task is created from an opportunity with a primary contact? Can it be done thru a custom weblink? I think Bob B. may have had some weblink documentation?

There are a couple of options to solve this issue. One option would be to use a post-default to set the value. This option would allow you the ability to use logic to determine whether it is populated or not. The other option would be to use a custom weblink that populates the value, but I don't know that you would be able to use logic in the weblink option. I have docs on these options, so you can contact me via email and I send you what I have.
Good luck,
Thom

Not able populate correct data into fields in alv report

hi experts,
question: from delivery document number(likp-vbeln) go to delivery items to get lips-matnr,lips-lgort
TYPE-POOLS:SLIS.
TABLES: MARC,LIPS,LIKP,VBAK,VBAP,VBRP.
SELECT-OPTIONS:S_VKORG FOR LIKP-VKORG,
               S_VBELN FOR LIKP-VBELN,
               S_MATGR FOR MARC-MATGR,
               S_AUART FOR VBAK-AUART.
DATA: BEGIN OF ITAB OCCURS 0 ,
       MATGR LIKE MARC-MATGR,
       MATNR LIKE LIPS-MATNR,
       LGORT LIKE LIPS-LGORT,
       WADAT_IST LIKE LIKP-WADAT_IST,
       AUART LIKE VBAK-AUART,
       WAVWR LIKE VBRP-WAVWR,
       KWMENG LIKE VBAP-KWMENG,
       VBELN LIKE LIKP-VBELN,
      VBELN LIKE VBAK-VBELN,
      <GORT TYPE LIPS-LGORT,
       END OF ITAB.
   DATA: BEGIN OF JTAB OCCURS 0,
         VBELN LIKE VBAK-VBELN,
         END OF JTAB.
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
         I_EVENTCAT TYPE SLIS_T_EVENT WITH HEADER LINE.
START-OF-SELECTION.
SELECT AMATNR ALGORT INTO TABLE ITAB   FROM LIPS AS
A INNER JOIN
LIKP AS B ON BVBELN EQ AVBELN WHERE BVBELN IN S_VBELN AND BVKORG
IN
S_VKORG.
ENDSELECT.
*I_FIELDCAT-COL_POS = 1.
*I_FIELDCAT-FIELDNAME = 'VBELN'.
*I_FIELDCAT-TABNAME = 'ITAB'.
*APPEND I_FIELDCAT TO I_FIELDCAT.
*CLEAR I_FIELDCAT.
I_FIELDCAT-COL_POS = 1.
I_FIELDCAT-FIELDNAME = 'MATNR'.
*I_FIELDCAT-TABNAME = 'ITAB'.
I_FIELDCAT-REF_TABNAME = 'MATNR'.
I_FIELDCAT-REF_TABNAME = 'LIPS'.
APPEND I_FIELDCAT .
*CLEAR I_FIELDCAT.
I_FIELDCAT-COL_POS = 2.
I_FIELDCAT-FIELDNAME = 'LGORT'.
*I_FIELDCAT-TABNAME = 'ITAB'.
I_FIELDCAT-REF_TABNAME = 'LIPS'.
APPEND I_FIELDCAT .
*CLEAR I_FIELDCAT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
    I_INTERFACE_CHECK              = ' '
    I_BYPASSING_BUFFER             =
    I_BUFFER_ACTIVE                = ' '
     I_CALLBACK_PROGRAM             = SY-REPID
    I_CALLBACK_PF_STATUS_SET       = ' '
    I_CALLBACK_USER_COMMAND        = ' '
    I_STRUCTURE_NAME               =
    IS_LAYOUT                      =
     IT_FIELDCAT                    = I_FIELDCAT[]
    IT_EXCLUDING                   =
    IT_SPECIAL_GROUPS              =
    IT_SORT                        =
    IT_FILTER                      =
    IS_SEL_HIDE                    =
    I_DEFAULT                      = 'X'
    I_SAVE                         = ' '
    IS_VARIANT                     =
     IT_EVENTS                      = I_EVENTCAT[]
    IT_EVENT_EXIT                  =
    IS_PRINT                       =
    IS_REPREP_ID                   =
    I_SCREEN_START_COLUMN          = 0
    I_SCREEN_START_LINE            = 0
    I_SCREEN_END_COLUMN            = 0
    I_SCREEN_END_LINE              = 0
IMPORTING
    E_EXIT_CAUSED_BY_CALLER        =
    ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB                       = ITAB
EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
i am unable to populate correct data into fields i am getting matnr values as all 1's
and lgort as empty
can anyone help me out
thanks.

HI there
This is what i found on the Forum
"You can use FM RS_VARIANT_CONTENTS to display ONE variant associated to a report
If you want to see the information of ALL VARIANTS associated to a report I think the only way is checking table VARID to get all the variants associated to the report and then do a loop and call RS_VARIANT_CONTENTS for each variant."
Regards
Tatenda

Populate and display internal table results using search help exit...

I have copied F4IF_SHLP_EXIT_EXAMPLE and made changes. I want this search help exit to populate and display contents related to 'FIELD1' when the user enters a specific value for it in the search help screen, meaning when the user restricts the search by that value. For field2, field3, field4, field5, field6, field7, and field8 I am using a custom view.
Following is the code:
TYPES: BEGIN OF t_search,
               field2 TYPE field2,
               field3 TYPE field3,
               field4 TYPE field4,
               field5 TYPE field5,
               field6 TYPE field6,
               field7 TYPE field7,
               field8 TYPE field8,
               field1 TYPE field1,
            END OF t_search.
DATA: it_itab TYPE TABLE OF t_search,
        wa TYPE t_search,
     wa_selopt TYPE ddshselopt,
        wa_fielddescr TYPE dfies.
ranges: r_field1 for std_table1-field1
STEP SELECT    (Select values)
    FREE: r_field1.
**Get the value entered for FIELD1 in search help
    LOOP AT shlp-selopt INTO wa_selopt.
      CASE wa_selopt-shlpfield.
        WHEN 'FIELD1'.
          r_field1-sign = wa_selopt-sign.
          r_field1-option = wa_selopt-option.
          r_field1-low = wa_selopt-low.
          r_field1-high = wa_selopt-high.
          APPEND r_field1.
          CLEAR: r_field1.
      ENDCASE.
    ENDLOOP.
**Select 'ID' and 'FIELD1' from table into lt_itab
    SELECT id field1
          INTO TABLE lt_itab
            FROM std_table1
              WHERE field1 IN r_field1.
    IF sy-subrc = 0.
**Now, based on the particular IDs from lt_itab, I need to select other values
from other tables which also have 'ID' as the key.
       SELECT std_table2~field2
            std_table2~field3
            std_table3~field4
            std_table3~field5
            std_table3~field6
            std_table4~field7
            std_table4~field8
            std_table1~field1
          INTO CORRESPONDING FIELDS OF TABLE it_itab
          FROM std_table2
                     INNER JOIN std_table3 ON
                            std_table3mandt = std_table2mandt AND
                            std_table3id = std_table2id
                     INNER JOIN std_table4 ON
                            std_table4mandt = std_table2mandt AND
                            std_table4id = std_table2id
                     INNER JOIN std_table1 ON
                            std_table1mandt = std_table2mandt AND                                           std_table1id = std_table2id
          WHERE
                std_table1~field1 IN r_field1.
'id' is common in all the std_tables --> std_table1, std_table2, std_table3, std_table4.
STEP DISP     (Display values)
**Then I need to gather all the results in my internal table it_itab and display
in search help results for the value of FIELD1 entered by the user in the search help.
    CALL FUNCTION 'F4UT_PARAMETER_RESULTS_PUT'
      EXPORTING
        parameter   = 'FIELD1'
        fieldname   = 'FIELD1'
      TABLES
        shlp_tab    = shlp_tab
        record_tab = record_tab
        source_tab = it_itab
      CHANGING
        shlp        = shlp
        callcontrol = callcontrol.
I am not getting all the data in my internal table and wanted to know if there is anyting wrong in my select statement.
Any guidance will be appreciated and awarded appropriate points.
Thanks.

the webdynpro fieldname and the search help input parameter name were made same.

How to populate read only input field or text view form value help only

Hi experts,
I have one requirement to populate a read-only field or text view from value help.
User cant put any value there.value comes only from the value help.
For example,
when we read context using Code Wizard,we cant type any value there.value only comes from value help.
How to implement that functionality?
Please reply.
Thanks in advance,
Subhasis.

Yes it is possible.
1.Create a context Attribute and then bind this attribute to the Text view UI element.
2. read context attribute and then set value to the context attribute like this way.
DATA:
    elem_context1                        TYPE REF TO if_wd_context_element,
    stru_context1                        TYPE if_first=>element_context ,
    item_potxt                          LIKE stru_context-potxt.
get element via lead selection
elem_context1 = wd_context->get_element( ).
stru_context1-potxt = 'PO'.
elem_context1->set_attribute(
    VALUE = stru_context1
    name   = 'POTXT'
thanks
Suman
Edited by: suman kumar chinnam on Sep 9, 2008 12:12 PM

How to populate the data in fields if we tab out at one field

Hi Gurus,
I am new to OAF Technology and I've new requirement in custom OAF page.
We have 12 fields like ID, Fname, Lname, Age, Address, Tphone etc..
If we enter ID in message text input field box and tab out, then it should populate all the remaining fields data by default.
Could anyone help me regarding this requirement?
Thanks in Advance
Sruthi

Hi,
Sruthi wrote:
I am new to OAF Technology and I've new requirement in custom OAF page.
We have 12 fields like ID, Fname, Lname, Age, Address, Tphone etc..
If we enter ID in message text input field box and tab out, then it should populate all the remaining fields data by default.
Could anyone help me regarding this requirement?---MessageTextInput filed set Action property:FirePartialAction and Event:TextInput
---Get the Event in co PFR
if("TextInput".equals(pageContext.getParameter(EVENT_PARAM)))
AM.setDafultValue();
---Write a method in AM
public void setDafultValue()
VOImpl vo=getVO1();
if(vo!= null)
vo.getCurrentRow().setAttribute("Number1","DefaultValue1");
vo.getCurrentRow().setAttribute("Number2","DefaultValue2");
---Like this u can set default value when tab out.
Regards
Meher Irk

Pre-populate and post populate fields

Similar Messages

Maybe you are looking for